Locator

Zusammenfassung

The Locator class allows you to modify locators and use them for geocoding. Geocoding is the process of transforming a description of a location—such as a pair of coordinates, an address, or a name of a place—to a location on the earth's surface.

The Geocoding module was designed to support locators created with the Create Locator tool. Locators created with legacy tools may have limited functionality, and a number of properties and parameters will not be supported.

Diskussion

A locator is a portable file used to perform geocoding, the process of finding addresses and places on a map. Locators contain a snapshot of the reference data used for geocoding, as well as indexes and local addressing knowledge that help return the best match during the geocoding process.

A locator can be accessed as a service on your portal, such as ArcGIS World Geocoding Service, as a service accessed through an AGS server connection, or as a file on disk.

Syntax

Locator (path)
ParameterErläuterungDatentyp
path

A path to the locator.

String

Hinweis:
If you are working with locators on your portal, make sure you are signed in and have it set as your active portal in ArcGIS Pro. To access a locator that is on a portal other than your active portal, you can authenticate using SignInToPortal.

Create a Locator object from a locator stored on disk.

import arcpy

# Create a new Locator object from a locator on disk
locator_path = r"C:\Locators\Atlanta.loc"
locator = arcpy.geocoding.Locator(locator_path)

Create a Locator object from ArcGIS World Geocoding Service.

import arcpy

# Create a new Locator object from the ArcGIS World Geocoding Service
locator_path = "https://geocode.arcgis.com/arcgis/rest/services/World/GeocodeServer/ArcGIS World Geocoding Service"
locator = arcpy.geocoding.Locator(locator_path)

Create a Locator object from an AGS connection.

import arcpy

# Create a new Locator object from a locator published to ArcGIS Server
locator_path = r"C:\AGS Files\MyAGSConnectionFile.ags\Atlanta"
locator = arcpy.geocoding.Locator(locator_path)

Create a Locator object from a locator item on your own ArcGIS Enterprise Portal.

import arcpy


# Create a new Locator object from the locator on your portal
locator_path = "https://myenterpriseportal.esri.com/server/rest/services/Geocode/Atlanta/GeocodeServer/Atlanta"
locator = arcpy.geocoding.Locator(locator_path)

Eigenschaften

EigenschaftErläuterungDatentyp
capabilities
(Schreibgeschützt)

Returns the capabilities that are available for a locator that is shared as a service to ArcGIS Enterprise or published as a geocode service to ArcGIS Server. The available capabilities are as follows:

  • Geocoding—If this value is included in the property, the geocoding service supports geocoding operations, finding a location for an address or place.
  • ReverseGeocoding—If this value is included in the property, the geocoding service supports reverse geocoding operations, finding the closest place or address to a given location.
  • Suggest—If this value is included in the property, the geocoding service supports generating autocomplete suggestions from input.
A single string containing all supported capabilities will be returned for this property.

This property is only supported for geocoding services. It is not supported for local locators, and an error will be returned if you attempt to access this property for a local locator.

String
categories
(Lesen und schreiben)

Controls precision by limiting the categories that can be returned from the locator to a defined set. If you have a multirole locator that supports multiple address types, you can modify this setting to exclude matches to certain types. For example, your locator can support matches to PointAddress level, StreetAddress level, StreetName level, and Postal level. You may want to exclude matches to the Postal level because you consider matches to that level to be too imprecise for your purposes. This setting allows you to control the precision of your geocoding experience.

This property is read-only for geocoding services. To change this property in a published locator, modify the property locally, and publish your locator again.

Hinweis:
This property is set as runtime property only. It is not persisted to the locator outside of your current session unless you use the updateLocator method.
String
defaultSuggestCandidates
(Lesen und schreiben)

The number of suggestion candidates that are returned by default from the suggest method.

This property is read-only for geocoding services. To change this property in a published locator, modify the property locally, and publish your locator again.

Hinweis:
This property is set as runtime property only. It is not persisted to the locator outside of your current session unless you use the updateLocator method.
Integer
matchOutOfRange
(Lesen und schreiben)

Controls whether a match will be returned if the street number searched for is slightly out of range of what is included in the street segment of the data on which the locator was built.

To match to a street segment, even if the street number doesn't exist on the line segment in your data but is within a reasonable threshold and is likely to exist, set the property to True. When this property is set to True, the point is placed on the end of the street segment where the address is slightly outside of the house number range. This ensures that you do not miss a potential match because the data is not 100 percent up to date.

The matchOutOfRange property only applies to locators that support and return StreetAddress matches.

This property is read-only for geocoding services. To change this property in a published locator, modify the property locally, and publish your locator again.

Hinweis:
This property is set as runtime property only. It is not persisted to the locator outside of your current session unless you use the updateLocator method.
Boolean
maxCandidates
(Lesen und schreiben)

The maximum number of candidates that are returned from the geocode method.

If you find that geocoding is taking a long time and you are also getting high-quality matches, ensure that this property is not set too high. Assuming you are getting good results, performance can be improved by generating fewer results and focusing on the top few.

This property is read-only for geocoding services. To change this property in a published locator, modify the property locally, and publish your locator again.

Hinweis:
This property is set as runtime property only. It is not persisted to the locator outside of your current session unless you use the updateLocator method.
Integer
maxSuggestCandidates
(Lesen und schreiben)

The maximum number of suggestion results that are returned from the suggest method.

If you find that the suggest method has poor performance, it may be because the locator is generating a very large number of suggestion results. Setting this value to a lower number can improve performance.

This property is read-only for geocoding services. To change this property in a published locator, modify the property locally, and publish your locator again.

Hinweis:
This property is set as runtime property only. It is not persisted to the locator outside of your current session unless you use the updateLocator method.
Integer
minCandidateScore
(Lesen und schreiben)

The minimum score that a result must have to be considered a match candidate for the geocode operation. The minimum score for a locator is a value between 0 and 100. Only candidates that meet or exceed the minimum candidate score are returned from the geocode method.

This property is read-only for geocoding services. To change this property in a published locator, modify the property locally, and publish your locator again.

Hinweis:
This property is set as runtime property only. It is not persisted to the locator outside of your current session unless you use the updateLocator method.
Integer
minMatchScore
(Lesen und schreiben)

The minimum score that a result of the geocode method must have to be considered a match.

The minimum score is a threshold that allows you to control how closely addresses must match their most likely candidate in the reference data to be considered a match. If the potential candidate is below the threshold, the address is not matched to the candidate.

The minimum match score for a locator is a value between 0 and 100. A perfect match yields a score of 100. If your workflows require matched addresses with a high level of confidence, set the property to a higher threshold. A higher setting ensures that only the highest-quality matches are returned. To maximize the number of addresses that can be matched, and if you do not mind if some addresses are potentially matched incorrectly, use a lower threshold setting.

This property is read-only for geocoding services. To change this property in a published locator, modify the property locally, and publish your locator again.

Hinweis:
This property is set as runtime property only. It is not persisted to the locator outside of your current session unless you use the updateLocator method.
Integer
multilineInputFields
(Schreibgeschützt)

The locator fields for multiline geocoding. This property returns a list of arcpy.Field objects for the multiline input fields for the locator. Multiline geocoding table fields can be mapped to a Field object name property when geocoding a table.

Field
numberOfThreads
(Lesen und schreiben)

The number of threads that are used for batch geocoding.

To best use this setting, you will need to think about the machine you will be using for geocoding and determine the number of cores available on your machine that you can devote to a geocoding job. Geocoding has the ability to use all of the cores on your machine to complete a geocoding job more quickly. By default, this value is set to a smaller number that should work on any machine regardless of the number of cores available, but it can be configured to use more cores if you know you have them available. It can be set to Auto to detect the cores on your machine and optimize the number of threads used for your machine, or you can choose to devote a specified number of cores to geocoding if you know you need to leave some other resources available for other applications.

If you plan to share your locator to ArcGIS Enterprise, it is recommended that you set the property to 4.

This property is read-only for geocoding services. To change this property in a published locator, modify the property locally, and publish your locator again.

Hinweis:
This property is set as runtime property only. It is not persisted to the locator outside of your current session unless you use the updateLocator method.
Integer
singleLineInputField
(Schreibgeschützt)

The locator field for singleline geocoding. This property returns an arcpy.Field object representing the singleline input field for the locator. A singleline geocoding table field can be mapped to this Field object's name property when geocoding a table.

Field
spatialReference
(Schreibgeschützt)

The spatial reference of the locator. The spatial reference will be the same as the data used to create the locator.

Hinweis:
This property is set as runtime property only. It is not persisted to the locator outside of your current session unless you use the updateLocator method.
String
supportedCountries
(Schreibgeschützt)

The countries that are supported by the locator.

Hinweis:
This property is set as runtime property only. It is not persisted to the locator outside of your current session unless you use the updateLocator method.
String
supportedRoles
(Schreibgeschützt)

Roles that are supported by the locator.

String
reverseGeocodeFeatureTypes
(Lesen und schreiben)

The types of features that are supported for the reverseGeocode method.

This property is read-only for geocoding services. To change this property in a published locator, modify the property locally, and publish your locator again.

Hinweis:
This property is set as runtime property only. It is not persisted to the locator outside of your current session unless you use the updateLocator method.
String

Methodenübersicht

MethodeErläuterung
geocode (searchText, forStorage, {preferredSearchLocation}, {countryCode}, {categories}, {locationType}, {outFields}, {maxResults}, {minScore}, {outputLanguageCode}, {searchExtent})

Takes an address or location as input and returns geocoding result candidates. The result candidates are points that you can display on a map or use as input for other analyses.

reverseGeocode (location, forStorage, {featureTypes}, {locationType}, {outputLanguageCode})

Takes a PointGeometry object as input and returns the closest address, point of interest, or intersection to that point. The result is a reverse geocoded result that contains information about the match address or location, geometry information including x- and y-coordinates, and additional attributes depending on the Locator used.

suggest (searchText, {preferredSearchLocation}, {countryCode}, {categories}, {maxResults}, {searchExtent})

Generates autocomplete suggestions for incomplete or partial user input. A single suggestion result can be passed to the geocodeWithSuggest method to generate points that you can display on a map or use as input for other analyses.

geocodeWithSuggest (suggestResult, forStorage, {preferredSearchLocation}, {countryCode}, {categories}, {locationType}, {outFields}, {maxResults}, {minScore}, {outputLanguageCode}, {searchExtent})

Takes a single suggest method result as input and returns geocoding result candidates. The result candidates are points that you can display on a map or use as input for other analyses.

It is recommended that you pass the same parameters to the geocodeWithSuggest method that you passed when you generated the suggest method result that you are using to achieve consistent results.

updateLocator ()

Persists changes made to Locator properties during the current Python session to the locator so that the properties are applied for future use.

Methoden

geocode (searchText, forStorage, {preferredSearchLocation}, {countryCode}, {categories}, {locationType}, {outFields}, {maxResults}, {minScore}, {outputLanguageCode}, {searchExtent})
ParameterErläuterungDatentyp
searchText

An address or place-name to find the location of.

String
forStorage

Specifies whether the results will be persisted. The default value is False, which indicates the results can't be stored, but they can be temporarily displayed on a map, for instance. If you store the results, in a database, for example, set this parameter to True.

This parameter only applies to geocoding requests made with ArcGIS World Geocoding Service. For all other locators, the parameter is ignored.

Hinweis:

Applications are contractually prohibited from storing the results of geocoding operations using ArcGIS World Geocoding Service unless they make the request by passing the forStorage parameter with a value of True. For a Locator using ArcGIS World Geocoding Service to be valid, you must log in to ArcGIS Online with a valid organizational account. ArcGIS Online service credits are deducted from the organizational account for each geocode transaction.

Boolean
preferredSearchLocation

An origin point that is used to prefer or boost geocoding candidates based on their proximity to the location. Candidates near the location are prioritized relative to those farther away.

PointGeometry
countryCode

A comma-delimited string of three-character country codes that limits geocoding results to the set of specified countries, which will improve the accuracy of geocoding in most cases. When no country is specified, geocoding with suggestions is performed against all countries supported by the locator.

If you are using ArcGIS World Geocoding Service, refer to this list of supported countries.

String
categories

A comma-separated list of categories that limits the types of places the locator searches, thus eliminating false positive matches and potentially speeding up the search process. See the REST API web help for details about category filtering.

String
locationType

Specifies the preferred output location for PointAddress matches. If the preferred location does not exist in the data, the default location will be returned instead. For geocode results with Addr_type=PointAddress, the x,y attribute values describe the coordinates of the address along the street, while the DisplayX and DisplayY values describe the rooftop, or building centroid, coordinates.

This argument only affects the geometry, not the attribute values.

  • "rooftop"An address location such as rooftop location, parcel centroid, or front door.
  • "street"A location close to the side of the street, which can be used for vehicle routing. This is the default.
String
outFields

The list of fields to be returned as part of the attributes in the result. This parameter supports a single field name or a comma-delimited string of field names (without spaces). To return the default output fields, outFields does not need to be passed. Use an asterisk ("*") to return all available output fields with the result. The output fields are described in What's included in the geocoded results.

Hinweis:
This property is not supported for locators on disk.

String
maxResults

The maximum number of locations, up to the maximum number allowed by the Locator. If not specified, all matching candidates up to the maximum specified in the Locator properties are returned.

Integer
minScore

Limits the candidates that are returned to those with a score above the value set for this property. The value should be between 0 and 100.

Integer
outputLanguageCode

The language in which the geocode results are returned. Since addresses and places in many countries are available in more than one language, this ensures that results are returned in the expected language.

If you are using ArcGIS World Geocoding Service, refer to the list of supported countries to see what language codes are supported for those countries.

String
searchExtent

An extent that limits the area to be searched. All results that are returned outside of the specified extent are excluded.

Extent
Rückgabewert
DatentypErläuterung
List

The output of the geocode operation is a list of dictionary objects. Each dictionary object represents a single geocoding result. Each geocoding result contains information about the match address or location, geometry information including x- and y-coordinates, and additional attributes depending on the Locator used and the outFields specified.

Hinweis:
If you are working with locators on your portal, make sure you are signed in and have it set as your active portal in ArcGIS Pro. To access a locator that is on a portal other than your active portal, you can authenticate using SignInToPortal.

Geocode to find the location of a place or address using a locator on disk.

import arcpy

# Create a new Locator object from a locator on disk
locator_path = r"C:\Locators\Atlanta.loc"
locator = arcpy.geocoding.Locator(locator_path)

# Geocode to find the location of an address
geocoding_candidates = locator.geocode("1670 W Peachtree St NE, Atlanta, GA 30309", False)

Geocode to find the location of a place or address using ArcGIS World Geocoding Service.

import arcpy

# Create a new Locator object from the ArcGIS World Geocoding Service
locator_path = "https://geocode.arcgis.com/arcgis/rest/services/World/GeocodeServer/ArcGIS World Geocoding Service"
locator = arcpy.geocoding.Locator(locator_path)

# Geocode to find the location of an address
geocoding_candidates = locator.geocode("1670 W Peachtree St NE, Atlanta, GA 30309", True)

Geocode to find the location of a place or address using a locator accessed through an AGS connection.

import arcpy

# Create a new Locator object from a locator published to ArcGIS Server
locator_path = r"C:\AGS Files\MyAGSConnectionFile.ags\Atlanta"
locator = arcpy.geocoding.Locator(locator_path)

# Geocode to find the location of an address
geocoding_candidates = locator.geocodeWithSuggest("1670 W Peachtree St NE, Atlanta, GA 30309", False)
reverseGeocode (location, forStorage, {featureTypes}, {locationType}, {outputLanguageCode})
ParameterErläuterungDatentyp
location

A point for which you want to find the nearest address, point of interest, or intersection.

PointGeometry
forStorage

Specifies whether the results will be persisted. The default value is False, which indicates the results can't be stored, but they can be temporarily displayed on a map, for instance. If you store the results, in a database, for example, set this parameter to True.

This parameter only applies to geocoding requests made with ArcGIS World Geocoding Service. For all other locators, the parameter is ignored.

Hinweis:

Applications are contractually prohibited from storing the results of geocoding operations using ArcGIS World Geocoding Service unless they make the request by passing the forStorage parameter with a value of True. For a Locator using ArcGIS World Geocoding Service to be valid, you must log in to ArcGIS Online with a valid organizational account. ArcGIS Online service credits are deducted from the organizational account for each geocode transaction that includes the forStorage parameter with a value of True.

(Der Standardwert ist False)

Boolean
featureTypes

Specify one or more match types to be returned. If only one value is specified, the search tolerance is adjusted.

For more information on how this argument is used in ArcGIS World Geocoding Service, refer to the REST API documentation.

String
locationType

Specifies the preferred output location. If the preferred location does not exist in the data, the default location will be returned instead. For reverse geocoding results with Addr_type=PointAddress, the x,y attribute values describe the coordinates of the address along the street, while the DisplayX and DisplayY values describe the rooftop, or building centroid, coordinates. For more information about this parameter, reference the information on the parameter in the Reverse Geocode REST API documentation.

This argument only affects the geometry, not the attribute values.

  • "rooftop"An address location such as rooftop location, parcel centroid, or front door.
  • "street"A location close to the side of the street, which can be used for vehicle routing. This is the default.
String
outputLanguageCode

The language in which the reverse geocode results are returned. Since addresses and places in many countries are available in more than one language, this will ensure that results are returned in the expected language.

If you are using ArcGIS World Geocoding Service, refer to the list of supported countries to see what language codes are supported for those countries.

String
Rückgabewert
DatentypErläuterung
List

The reverse geocoding result contains information about the match address or location, geometry information including x- and y-coordinates, and additional attributes depending on the Locator used, as well as a Shape key for which the value is a PointGeometry object.

Hinweis:
If you are working with locators on your portal, make sure you are signed in and have it set as your active portal in ArcGIS Pro. To access a locator that is on a portal other than your active portal, you can authenticate using SignInToPortal.

Reverse geocode to find the nearest place or address to a given location using a locator on disk.

import arcpy

# Create a new Locator object from a locator on disk
locator_path = r"C:\Locators\Atlanta.loc"
locator = arcpy.geocoding.Locator(locator_path)

# Create input PointGeometry object
spatial_reference = arcpy.SpatialReference(4326)
point = arcpy.Point(-84.374, 33.797)
point_geometry = arcpy.PointGeometry(point, spatial_reference)

# Reverse geocode to find the nearest address or place to the point
reverse_geocode_result = locator.geocode(point_geometry, False)

Reverse geocode to find the nearest place or address to a given location using ArcGIS World Geocoding Service.

import arcpy

# Create a new Locator object from the ArcGIS World Geocoding Service
locator_path = "https://geocode.arcgis.com/arcgis/rest/services/World/GeocodeServer/ArcGIS World Geocoding Service"
locator = arcpy.geocoding.Locator(locator_path)

# Create input PointGeometry object
spatial_reference = arcpy.SpatialReference(4326)
point = arcpy.Point(-84.374, 33.797)
point_geometry = arcpy.PointGeometry(point, spatial_reference)

# Reverse geocode to find the nearest address or place to the point
geocoding_candidates = locator.geocode(point_geometry, True)

Geocode to find the nearest place or address to a given location using a locator accessed through an AGS connection.

import arcpy

# Create a new Locator object from a locator published to ArcGIS Server
locator_path = r"C:\AGS Files\MyAGSConnectionFile.ags\Atlanta"
locator = arcpy.geocoding.Locator(locator_path)

# Create input PointGeometry object
spatial_reference = arcpy.SpatialReference(4326)
point = arcpy.Point(-84.374, 33.797)
point_geometry = arcpy.PointGeometry(point, spatial_reference)

# Reverse geocode to find the nearest address or place to the point
geocoding_candidates = locator.geocodeWithSuggest(point_geometry, False)
suggest (searchText, {preferredSearchLocation}, {countryCode}, {categories}, {maxResults}, {searchExtent})
ParameterErläuterungDatentyp
searchText

The partial text for which you want to generate suggestions.

String
preferredSearchLocation

An origin point that is used to prefer or boost suggestion candidates based on their proximity to the location. Candidates near the location are prioritized relative to those farther away.

PointGeometry
countryCode

A comma-delimited string of three-character country codes that limits suggestion results to the set of specified countries, which will improve the accuracy of suggestions in most cases. When no country is specified, suggestions are generated from all countries supported by the locator.

If you are using ArcGIS World Geocoding Service, refer to the list of supported countries in Geocode coverage.

String
categories

A comma-separated list of categories that limits the types of places for which the locator generates suggestions, thus eliminating false positive matches and potentially speeding up the process. See the REST API web help for details about category filtering.

String
maxResults

The maximum number of suggestions to be returned, up to the maximum number allowed by the Locator. If not specified, all matching suggestions up to the maximum specified in the Locator maxSuggestCandidates property are returned.

Integer
searchExtent

An extent that limits the area to be searched. All results that are returned outside of the specified extent are excluded.

Extent
Rückgabewert
DatentypErläuterung
List

The output of the suggest method is an array of dictionary objects. Each dictionary represents a single suggestion result. Each suggestion result contains the following keys: text, magicKey, and isCollection.

To use the output of the suggest method, the entire dictionary at the desired index of the list should be passed to the geocodeWithSuggest method.

Hinweis:
To learn more about the dictionary keys, refer to the REST API documentation.

Hinweis:
If you are working with locators on your portal, make sure you are signed in and have it set as your active portal in ArcGIS Pro. To access a locator that is on a portal other than your active portal, you can authenticate using SignInToPortal.

Generate suggestions based on an incomplete user input string using a locator on disk.

import arcpy

# Create a new Locator object from a locator on disk
locator_path = r"C:\Locators\Atlanta.loc"
locator = arcpy.geocoding.Locator(locator_path)

# Generate suggestions from partial user input
suggestion_candidates = locator.suggest("1670 w peach")

Generate suggestions based on an incomplete user input string using ArcGIS World Geocoding Service.

import arcpy

# Create a new Locator object from the ArcGIS World Geocoding Service
locator_path = "https://geocode.arcgis.com/arcgis/rest/services/World/GeocodeServer/ArcGIS World Geocoding Service"
locator = arcpy.geocoding.Locator(locator_path)

# Generate suggestions from partial user input
suggestion_candidates = locator.suggest("1670 w peach")

Generate suggestions based on an incomplete user input string using a locator accessed through an AGS connection.

import arcpy

# Create a new Locator object from a locator published to ArcGIS Server
locator_path = r"C:\AGS Files\MyAGSConnectionFile.ags\Atlanta"
locator = arcpy.geocoding.Locator(locator_path)

# Generate suggestions from partial user input
suggestion_candidates = locator.suggest("1670 w peach")
geocodeWithSuggest (suggestResult, forStorage, {preferredSearchLocation}, {countryCode}, {categories}, {locationType}, {outFields}, {maxResults}, {minScore}, {outputLanguageCode}, {searchExtent})
ParameterErläuterungDatentyp
suggestResult

The output from the suggest method is used to locate an address or place. The suggestion result is a dictionary that contains text, magicKey, and isCollection keys.

To learn more about the keys included in the suggestion result dictionary objects, refer to the REST API documentation.

Dictionary
forStorage

Specifies whether the results will be persisted. The default value is False, which indicates the results of the operation can't be stored, but they can be temporarily displayed on a map, for instance. If you store the results, in a database, for example, set this parameter to True.

This parameter only applies to geocoding requests made with ArcGIS World Geocoding Service. For all other locators, the parameter is ignored.

Applications are contractually prohibited from storing the results of geocoding operations using ArcGIS World Geocoding Service unless they make the request by passing the forStorage parameter with a value of True. For a Locator using ArcGIS World Geocoding Service to be valid, you must log in to ArcGIS Online with a valid organizational account. ArcGIS Online service credits are deducted from the organizational account for each geocode transaction that stores results.

Boolean
preferredSearchLocation

An origin point that is used to prefer or boost geocoding candidates based on their proximity to the location. Candidates near the location are prioritized relative to those farther away.

PointGeometry
countryCode

A comma-delimited string of three-character country codes that limits geocoding results to the set of specified countries, which will improve the accuracy of geocoding in most cases. When no country is specified, geocoding with suggestions is performed against all supported countries of the locator.

If you are using ArcGIS World Geocoding Service, refer to this list of supported countries.

String
categories

A comma-separated list of categories that limits the types of places the locator searches, thus eliminating false positive matches and potentially speeding up the search process. See the REST API web help for details about category filtering.

String
locationType

Specifies the preferred output geometry for PointAddress matches. If the preferred location does not exist in the data, the default location will be returned instead. For geocode results with Addr_type=PointAddress, the x,y attribute values describe the coordinates of the address along the street, while the DisplayX and DisplayY values describe the rooftop, or building centroid, coordinates.

This argument only affects the geometry, not the attribute values.

  • "rooftop"An address location such as rooftop location, parcel centroid, or front door.
  • "street"A location close to the side of the street, which can be used for vehicle routing. This is the default.
String
outFields

The list of fields to be returned as part of the attributes in the result. This parameter supports a single field name or a comma-delimited string of field names (without spaces). To return the default output fields, outFields does not need to be passed. Use an asterisk ("*") to return all available output fields with the result. The output fields are described in What's included in the geocoded results.

Hinweis:
This property is not supported for locators on disk.

String
maxResults

The maximum number of locations, up to the maximum number allowed by the Locator. If not specified, all matching candidates up to the maximum specified by the maxCandidate property in the Locator properties are returned.

Integer
minScore

Limits the candidates that are returned to those with a score above the value set for this property. The value should be between 0 and 100.

Integer
outputLanguageCode

The language in which the geocode results are returned. Since addresses and places in many countries are available in more than one language, this will ensure that results are returned in the expected language.

If you are using ArcGIS World Geocoding Service, refer to the list of supported countries to see what language codes are supported for those countries.

String
searchExtent

An extent that limits the area to be searched. All results that are returned outside of the specified extent are excluded.

Extent
Rückgabewert
DatentypErläuterung
List

The output of the geocodeWithSuggest method is a list of dictionary objects. Each dictionary represents a single geocoding result. Each geocoding result contains information about the match address or location, geometry information including x- and y-coordinates, and additional attributes depending on the Locator used and the outFields specified.

Hinweis:
If you are working with locators on your portal, make sure you are signed in and have it set as your active portal in ArcGIS Pro. To access a locator that is on a portal other than your active portal, you can authenticate using SignInToPortal.

Generate suggestions based on incomplete user input string, and geocode with one of the suggestions generated as the output of that operation to find a location using a locator on disk.

import arcpy

# Create a new Locator object from a locator on disk
locator_path = r"C:\Locators\Atlanta.loc"
locator = arcpy.geocoding.Locator(locator_path)

# Generate suggestions from partial user input
suggestion_candidates = locator.suggest("1670 w peach")

# Geocode using one of the suggestions generated as the output of the suggest 
# operation
geocoding_candidates = locator.geocodeWithSuggest(suggestion_candidates[0], False)

Generate suggestions based on incomplete user input string, and geocode with one of the suggestions generated as the output of that operation to find a location using ArcGIS World Geocoding Service.

import arcpy

# Create a new Locator object from the ArcGIS World Geocoding Service
locator_path = "https://geocode.arcgis.com/arcgis/rest/services/World/GeocodeServer/ArcGIS World Geocoding Service"
locator = arcpy.geocoding.Locator(locator_path)

# Generate suggestions from partial user input
suggestion_candidates = locator.suggest("1670 w peach")

# Geocode using one of the suggestions generated as the output of the suggest 
# operation
geocoding_candidates = locator.geocodeWithSuggest(suggestion_candidates[0], True)

Generate suggestions based on incomplete user input string, and geocode with one of the suggestions generated as the output of that operation to find a location using a locator accessed through an AGS connection.

import arcpy

# Create a new Locator object from a locator published to ArcGIS Server
locator_path = r"C:\AGS Files\MyAGSConnectionFile.ags\Atlanta"
locator = arcpy.geocoding.Locator(locator_path)

# Generate suggestions from partial user input
suggestion_candidates = locator.suggest("1670 w peach")

# Geocode using one of the suggestions generated as the output of the suggest 
# operation
geocoding_candidates = locator.geocodeWithSuggest(suggestion_candidates[0], False)
updateLocator ()

Update a property of a locator on disk, and persist changes.

import arcpy

# Create a new Locator object from a locator on disk
locator_path = r"C:\Locators\Atlanta.loc"
locator = arcpy.geocoding.Locator(locator_path)

# Update the minimum match score property on the locator
locator.minMatchScore = 95

# Persist changes to the .loc file
locator.updateLocator()