Generate Elevation Bands (Topographic Production)

Zusammenfassung

Creates an elevation bands feature class from a Digital Elevation Model (DEM).

Verwendung

  • The Area of Interest parameter must have only one selected feature in the map sheet extent.

  • The Hydro Exclusion Features parameter is used to identify large bodies of water and coastal areas that would significantly alter the area of the elevation bands.

  • Elevation bands are created with their limits aligned to the Contour Interval parameter, except low and high values, which will represent their actual calculated values.

  • If more than one input raster is used, all input rasters must have the same cell size, band count, and pixel type. All input rasters should also use the same elevation units (meters or feet).

Parameter

BeschriftungErläuterungDatentyp
Input Raster

The rasters used to create elevation bands.

Raster Layer; Mosaic Layer
Area of Interest

The layer that defines the processing extent.

Layer
Output Feature Class

The feature class containing the output elevation band features.

Feature Class
Contour Interval

Determines the closest available contour when calculating the elevation band area. The default is 20.

  • 10A contour interval of 10.
  • 20A contour interval of 20.
  • 40A contour interval of 40.
  • 80A contour interval of 80.
Long
Minimum Feature Area

The minimum area for output polygons. Features smaller than this value will be removed. The default is 0.00016 square decimal degrees.

Hinweis:

If you're creating an output dataset with a projected coordinate system, this value should reflect the square units of that coordinate system—for example, square meters for a UTM dataset. Otherwise, the default value may result in an empty output dataset.

Double
Smoothing Tolerance

The tolerance used by the smoothing algorithm. The larger the value, the more generalized the output band features. The default is 0.002 decimal degrees.

Linear Unit
Hydro Exclusion Features
(optional)

The bodies of water to exclude when calculating the elevation band area.

Feature Layer
Number of Elevation Bands
(optional)

The number of elevation bands generated by the tool.

  • 1One elevation band will be generated.
  • 2Two elevation bands will be generated.
  • 3Three elevation bands will be generated.
  • 4Four elevation bands will be generated.
Long

arcpy.topographic.GenerateElevationBands(in_raster, in_aoi, out_feature_class, contour_interval, min_area, smooth_tolerance, {in_hydro_features}, {number_of_bands})
NameErläuterungDatentyp
in_raster
[in_raster,...]

The rasters used to create elevation bands.

Raster Layer; Mosaic Layer
in_aoi

The layer that defines the processing extent.

Layer
out_feature_class

The feature class containing the output elevation band features.

Feature Class
contour_interval

Determines the closest available contour when calculating the elevation band area. The default is 20.

  • 10A contour interval of 10.
  • 20A contour interval of 20.
  • 40A contour interval of 40.
  • 80A contour interval of 80.
Long
min_area

The minimum area for output polygons. Features smaller than this value will be removed. The default is 0.00016 square decimal degrees.

Hinweis:

If you're creating an output dataset with a projected coordinate system, this value should reflect the square units of that coordinate system—for example, square meters for a UTM dataset. Otherwise, the default value may result in an empty output dataset.

Double
smooth_tolerance

The tolerance used by the smoothing algorithm. The larger the value, the more generalized the output band features. The default is 0.002 decimal degrees.

Linear Unit
in_hydro_features
(optional)

The bodies of water to exclude when calculating the elevation band area.

Feature Layer
number_of_bands
(optional)

The number of elevation bands generated by the tool.

  • 1One elevation band will be generated.
  • 2Two elevation bands will be generated.
  • 3Three elevation bands will be generated.
  • 4Four elevation bands will be generated.
Long

Codebeispiel

GenerateElevationBands example (stand-alone script)

The following code sample creates a raster layer from Production Mapping sample data. The script runs the GenerateElevationBands tool against the raster layer and writes the output to a file geodatabase at C:\Temp. You need to have the ArcGIS Spatial Analyst extension and the Production Mapping extension enabled.

# Name: GenerateElevationBands_sample.py
# Description: Use the Generate Elevation Bands tool to create a new output feature class with elevation bands for cartography

# Import System Modules
import arcpy

# Check Out Extensions
arcpy.CheckOutExtension('Foundation')
arcpy.CheckOutExtension('Spatial')

# Setting Local Variables
in_raster = r'C:\Temp\Monterey.dt2'
in_aoi = r'C:\Temp\MapIndex.gdb\Index_Polygons'
output_features = r'C:\Temp\Test.gdb\Output_Elevation_Bands'
contour_interval = 20
minimum_area = '0.00016'
tolerance = '0.02 DecimalDegrees'
in_hydro_exclusion = r'C:\Temp\Test.gdb\Hydro_Polygons'
number_of_bands = 3

# Creating feature layer and selecting an index feature
query = "PRODUCT_ID = 'V795X16573'"
aoi_layer = arcpy.management.MakeFeatureLayer(in_aoi, 'AOI').getOutput(0)
arcpy.management.SelectLayerByAttribute(aoi_layer, 'NEW_SELECTION', query)

# Creating feature layer and setting definition query for tidal water features
exclusion_layer = arcpy.management.MakeFeatureLayer(in_hydro_exclusion, 'HYDRO', "TYPE = 'Tidal Water'").getOutput(0)

# Calling Generate Elevation Bands tool
arcpy.topographic.GenerateElevationBands(in_raster, aoi_layer, output_features, contour_interval, minimum_area, tolerance,
                                        exclusion_layer, number_of_bands)
# Check In Extensions
arcpy.CheckInExtension('Foundation')
arcpy.CheckInExtension('Spatial')

Umgebungen

Dieses Werkzeug verwendet keine Geoverarbeitungsumgebungen.

Lizenzinformationen

  • Basic: Nein
  • Standard: Nein
  • Advanced: Erfordert Production Mapping and ArcGIS Spatial Analyst extension

Verwandte Themen