Band Arithmetic function

Overview

The Band Arithmetic function performs an arithmetic operation on the bands of a raster dataset. You can choose predefined algorithms, or you can enter your own single-line formula. The supported operators are -,+,/,*, and unary -.

Notes

When using the User Defined method to define your band arithmetic algorithm, you can enter a single-line algebraic formula to create a single-band output. The supported operators are -,+,/,*, and unary -. To identify the bands, add B or b to the beginning of the band number. For example:

B1 + B2
b1 + (-b2)
(B1 + B2) / 2(B3 * B5)

When using the predefined indices, enter a space-delimited list indicating the band numbers to be used. The predefined indices are detailed below.

CIg method

The Chlorophyll Index - Green (CIg) is a vegetation index for estimating the chlorophyll content in leaves using the ratio of reflectivity in the near-infrared (NIR) and green bands.

CIg = [(NIR / Green)-1]
  • NIR = pixel values from the near-infrared band
  • Green = pixel values from the green band

Using a space-delimited list, you will identify the NIR and green bands in the following order: NIR Green. For example, 7 3.

Reference: Gitelson, A.A., Kaufman, Y.J., Merzlyak, M.N., 1996. "Use of a green channel in remote sensing of global vegetation from EOS-MODIS," Remote Sensing of Environment, Vol. 58, 289–298.

CIre method

The Chlorophyll Index - Red-Edge (CIre) is a vegetation index for estimating the chlorophyll content in leaves using the ratio of reflectivity in the near-infrared (NIR) and red-edge bands.

Clre = [(NIR / RedEdge)-1]
  • NIR = pixel values from the near-infrared band
  • RedEdge = pixel values from the red-edge band

Using a space-delimited list, you will identify the NIR and red-edge bands in the following order: NIR RedEdge. For example, 7 6.

References:

  • Gitelson, A.A., Merzlyak, M.N., 1994. "Quantitative estimation of chlorophyll using reflectance spectra," Journal of Photochemistry and Photobiology B 22, 247–252.

Clay Minerals method

The Clay Minerals (CM) ratio is a geological index for identifying mineral features containing clay and alunite using two shortwave infrared (SWIR) bands. CM is used in mineral composite mapping.

CM = SWIR1 / SWIR2
  • SWIR1 = pixel values from the shortwave infrared band centering around 1.5—1.75µm
  • SWIR2 = pixel values from the shortwave infrared band centering around 2.08—2.35µm

For Landsat TM and ETM+, this corresponds to bands 5 (SWIR1) and 7 (SWIR2). For Landsat 8, this corresponds to bands 6 (SWIR1) and 7 (SWIR2).

Using a space-delimited list, you will identify the SWIR2 and SWIR2 bands in the following order: SWIR1 SWIR2. For example, 6 7.

Reference: Dogan, H., 2009. "Mineral composite assessment of Kelkit River Basin in Turkey by means of remote sensing," Journal of Earth System Science, Vol. 118, 701-710.

EVI method

The Enhanced Vegetation Index (EVI) is an optimized vegetation index that accounts for atmospheric influences and vegetation background signal. It's similar to NDVI but is less sensitive to background and atmospheric noise, and it does not become as saturated as NDVI when viewing areas with very dense green vegetation.

EVI = 2.5*(NIR - Red) / (NIR + 6*Red - 7.5*Blue + 1)
  • NIR = pixel values from the near infrared band
  • Red = pixel values from the red band
  • Blue = pixel values from the blue band

Using a space-delimited list, you will identify the near infrared, red, and blue bands in the following order: NIR Red Blue. For example, 5 4 2.

This index outputs values between 0 and 1.

Reference: Huete, A. et al. 2002, "Overview of the radiometric and biophysical performance of the MODIS vegetation indices." Remote sensing of environment , Vol. 83, 195-213.

Ferrous Minerals method

The Ferrous Minerals (FM) ratio is a geological index for identifying rock features containing some quantity of iron-bearing minerals using the shortwave infrared (SWIR) and near-infrared (NIR) bands. FM is used in mineral composite mapping.

FM = SWIR / NIR
  • SWIR = pixel values from the shortwave infrared band
  • NIR = pixel values from the shortwave infrared band

For Landsat TM and ETM+, this corresponds to bands 5 (SWIR) and 4 (NIR). For Landsat 8, this corresponds to bands 6 (SWIR) and 5 (NIR).

Using a space-delimited list, you will identify the SWIR and NIR bands in the following order: SWIR NIR. For example, 6 5.

Reference: Dogan, H., 2009. "Mineral composite assessment of Kelkit River Basin in Turkey by means of remote sensing," Journal of Earth System Science, Vol. 118, 701-710.

GEMI method

The Global Environmental Monitoring Index (GEMI) is a nonlinear vegetation index for global environmental monitoring from satellite imagery. It's similar to NDVI, but it's less sensitive to atmospheric effects. It is affected by bare soil; therefore, it's not recommended for use in areas of sparse or moderately dense vegetation.

GEMI = eta*(1-0.25*eta)-((Red-0.125)/(1-Red))

where,

eta = (2*(NIR2-Red2)+1.5*NIR+0.5*Red)/(NIR+Red+0.5)
  • NIR = pixel values from the near infrared band
  • Red = pixel values from the red band

Using a space-delimited list, you will identify the NIR and red bands in the following order: NIR Red. For example, 4 3.

This index outputs values between 0 and 1.

Reference: Pinty, B. and Verstraete, M. M. 1992, "GEMI: a non-linear index to monitor global vegetation from satellites," Plant Ecology, Vol. 101, 15–20.

GNDVI method

The Green Normalized Difference Vegetation Index (GNDVI) is a vegetation index for estimating photo synthetic activity and is a commonly used vegetation index to determine water and nitrogen uptake into the plant canopy.

GNDVI = (NIR-Green)/(NIR+Green)
  • NIR = pixel values from the near-infrared band
  • Green = pixel values from the green band

Using a space-delimited list, you will identify the near infrared and green bands in the following order: NIR Green. For example, 5 3.

This index outputs values between -1.0 and 1.0.

Reference: Buschmann, C., and E. Nagel. 1993. In vivo spectroscopy and internal optics of leaves as basis for remote sensing of vegetation. International Journal of Remote Sensing, Vol. 14, 711–722.

GVI (Landsat TM) method

The Green Vegetation Index (GVI) was originally designed from Landsat MSS imagery and has been modified for Landsat TM imagery. It's also known as the Landsat TM Tasseled Cap green vegetation index. It can be used with imagery whose bands share the same spectral characteristics.

GVI=-0.2848*Band1-0.2435*Band2-0.5436*Band3+0.7243*Band4+0.0840*Band5-1.1800*Band7

Using a space-delimited list, you will identify the six Landsat TM bands, ordered one through five and six. For example, 1 2 3 4 5 7. If your input contains six bands in the order expected, you don't need to enter a value in the Band Indexes text box.

This index outputs values between -1 and 1.

Reference: Todd, S. W., R. M. Hoffer, and D. G. Milchunas, 1998, "Biomass estimation on grazed and ungrazed rangelands using spectral indices," International Journal of Remote Sensing, Vol. 19, No. 3, 427–438.

Iron Oxide method

The Iron Oxide (IO) ratio is a geological index for identifying rock features that have experienced oxidation of iron-bearing sulfides using the red and blue bands. IO is useful in identifying iron oxide features below vegetation canopies and is used in mineral composite mapping.

IronOxide = Red / Blue
  • Red = pixel values from the red band
  • Blue = pixel values from the blue band

For Landsat TM and ETM+, this corresponds to bands 3 (red) and 1 (blue). For Landsat 8, this corresponds to bands 4 (red) and 2 (blue).

Using a space-delimited list, you will identify the red and blue bands in the following order: Red Blue. For example, 4 2.

Reference: Dogan, H., 2009. "Mineral composite assessment of Kelkit River Basin in Turkey by means of remote sensing," Journal of Earth System Science, Vol. 118, 701-710.

Modified SAVI method

The Modified Soil Adjusted Vegetation Index (MSAVI2) tries to minimize the effect of bare soil on the SAVI.

MSAVI2 = (1/2)*(2(NIR+1)-sqrt((2*NIR+1)2-8(NIR-Red)))
  • NIR = pixel values from the near infrared band
  • Red = pixel values from the red band

Using a space-delimited list, you will identify the NIR and red bands in the following order: NIR Red. For example, 4 3.

Reference: Qi, J. et al., 1994, "A modified soil vegetation adjusted index," Remote Sensing of Environment, Vol. 48, No. 2, 119–126.

MTVI2 method

The Modified Triangular Vegetation Index (MTVI2) is a vegetation index for detecting leaf chlorophyll content at the canopy scale while being relatively insensitive to leaf area index. It uses reflectance in the green, red, and near-infrared (NIR) bands.

MTVI2 = [1.5(1.2(NIR-Green)-2.5(Red-Green))√((2NIR+1)²-(6NIR-5√(Red))-0.5)]
  • NIR = pixel values from the near-infrared band
  • Red = pixel values from the red band
  • Green = pixel values from the green band

Using a space-delimited list, you will identify the NIR, red, and green bands in the following order: NIR Red Green. For example, 7 5 3.

Reference: Haboudane, D., Miller, J.R., Tremblay, N., Zarco-Tejada, P.J., Dextraze, L., 2002. "Integrated narrow-band vegetation indices for prediction of crop chlorophyll content for application to precision agriculture," Remote Sensing of Environment, Vol. 81, 416–426.

NDVI method

The Normalized Difference Vegetation Index (NDVI) is a standardized index allowing you to generate an image displaying greenness (relative biomass). This index takes advantage of the contrast of the characteristics of two bands from a multispectral raster dataset—the chlorophyll pigment absorptions in the red band and the high reflectivity of plant materials in the near-infrared (NIR) band. See NDVI function for more information about NDVI.

The documented and default NDVI equation is as follows:

NDVI = ((NIR - Red)/(NIR + Red))
  • NIR = pixel values from the near-infrared band
  • Red = pixel values from the red band

Using a space-delimited list, you will identify the NIR and red bands in the following order: NIR Red. For example, 4 3.

This index outputs values between -1.0 and 1.0.

Reference: Rouse, J.W., R.H. Haas, J.A. Schell, and D.W. Deering, 1973, "Monitoring vegetation systems in the Great Plains with ERTS," Third ERTS Symposium, NASA SP-351 I:309–317.

Learn more about NDVI

NDVIre method

The Red-Edge NDVI (NDVIre) is a vegetation index for estimating vegetation health using the red-edge band. It is especially useful for estimating crop health in the mid to late stages of growth, where the chlorophyll concentration is relatively higher. Also, NDVIre can be used to map the within-field variability of nitrogen foliage to understand the fertilizer requirements of crops.

The NDVIre index is calculated using the NIR and red-edge bands.

NDVIre = (NIR - RedEdge)/(NIR + RedEdge)
  • NIR = pixel values from the near-infrared band
  • RedEdge = pixel values from the red-edge band

Using a space-delimited list, you will identify the near-infrared and red-edge bands in the following order: NIR RedEdge. For example, 7 6.

This index outputs values between -1.0 and 1.0.

Reference: Gitelson, A.A., Merzlyak, M.N., 1994. "Quantitative estimation of chlorophyll using reflectance spectra," Journal of Photochemistry and Photobiology B 22, 247–252.

NDWI method

The Normalized Difference Water Index (NDWI) is an index for delineating and monitoring content changes in surface water. It is computed with the near-infrared (NIR) and green bands.

NDWI = (Green - NIR) / (Green + NIR)
  • NIR = pixel values from the near-infrared band
  • Green = pixel values from the green band

Using a space-delimited list, you will identify the NIR and Green bands in the following order: NIR Green. For example, 5 3.

This index outputs values between -1.0 and 1.0.

Reference: McFeeters, S., 1996. "The Use of Normalized Difference Water Index (NDWI) in the Delineation of Open Water Features." International Journal of Remote Sensing, 17, 1425-1432.

PVI method

The Perpendicular Vegetation Index (PVI) is similar to a difference vegetation index; however, it is sensitive to atmospheric variations. When using this method to compare different images, it should only be used on images that have been atmospherically corrected.

PVI = (NIR - a*Red - b) / (sqrt(1 + a2))
  • NIR = pixel values from the near-infrared band
  • Red = pixel values from the red band
  • a = slope of the soil line
  • b = gradient of the soil line

Using a space-delimited list, you will identify the NIR and red bands and enter the a and b values in the following order: NIR Red a b. For example, 4 3 0.3 0.5.

This index outputs values between -1.0 and 1.0.

Reference: Richardson, A. J. and C. L. Wiegand, 1977, "Distinguishing vegetation from soil background information," Photogrammetric Engineering and Remote Sensing, 43, 1541–1552.

RTVIcore method

The Red-Edge Triangulated Vegetation Index (RTVICore) is a vegetation index for estimating leaf area index and biomass. This index uses reflectance in the NIR, red-edge, and green spectral bands.

RTVICore = [100(NIR-RedEdge)-10(NIR-Green)]
  • NIR = pixel values from the near-infrared band
  • RedEdge = pixel values from the red-edge band
  • Green = pixel values from the green band

Using a space-delimited list, you will identify the NIR, red-edge, and green bands in the following order: NIR RedEdge Green. For example, 7 6 3.

Reference: Haboudane, D., Miller, J.R., Pattey, E., Zarco-Tejada, P.J., Strachan, I.B., 2004. "Hyperspectral vegetation indices and novel algorithms for predicting green LAI of crop canopies: modeling and validation in the context of precision agriculture," Remote Sensing of Environment, Vol. 90, 337–352.

SAVI method

The Soil-Adjusted Vegetation Index (SAVI) is a vegetation index that attempts to minimize soil brightness influences using a soil-brightness correction factor. This is often used in arid regions where vegetative cover is low.

SAVI = ((NIR - Red) / (NIR + Red + L)) x (1 + L)

NIR and Red refer to the bands associated with those wavelengths. The L value varies depending on the amount of green vegetative cover. Generally, in areas with no green vegetation cover, L=1; in areas of moderate green vegetative cover, L=0.5; and in areas with very high vegetation cover, L=0 (which is equivalent to the NDVI method). This index outputs values between -1.0 and 1.0.

Using a space-delimited list, you will identify the NIR and red bands and enter the L value in the following order: NIR Red L. For example, 4 3 0.5.

Reference: Huete, A. R., 1988, "A soil-adjusted vegetation index (SAVI)," Remote Sensing of Environment, Vol 25, 295–309.

SR method

The Simple Ratio (SR) is a common vegetation index for estimating the amount of vegetation. It is the ratio of light scattered in the NIR and absorbed in red bands, which reduces the effects of atmosphere and topography.

Values are high for vegetation with a large leaf area index, or high canopy closure, and low for soil, water, and nonvegetated features. The range of values is from 0 to about 30, where healthy vegetation generally falls between values of 2 to 8.

SR = NIR / Red
  • NIR = pixel values from the near-infrared band
  • Red = pixel values from the red band

Using a space-delimited list, you will identify the NIR and red bands in the following order: NIR Red. For example, 4 3.

Reference: Birth, G.S., and G.R. McVey, 1968. "Measuring color of growing turf with a reflectance spectrophotometer," Agronomy Journal Vol. 60, 640-649.

SRre method

The Red-Edge Simple Ratio (SRre) is a vegetation index for estimating the amount of healthy and stressed vegetation. It is the ratio of light scattered in the NIR and red-edge bands, which reduces the effects of atmosphere and topography.

Values are high for vegetation with high canopy closure and healthy vegetation, lower for high canopy closure and stressed vegetation, and low for soil, water, and nonvegetated features. The range of values is from 0 to about 30, where healthy vegetation generally falls between values of 1 to 10.

SRre = NIR / RedEdge
  • NIR = pixel values from the near-infrared band
  • RedEdge = pixel values from the red-edge band

Using a space-delimited list, you will identify the NIR and red-edge bands in the following order: NIR RedEdge. For example, 7 6.

Reference: Anatoly A. Gitelson, Yoram J. Kaufman, Robert Stark, and Don Rundquist, 2002, "Novel algorithms for remote estimation of vegetation fraction," Remote Sensing of Environment, Vol. 80, 76–87.

Sultan's Formula method

The Sultan's process takes a six-band 8-bit image and uses the Sultan's Formula to produce a three-band 8-bit image. The resulting image highlights rock formations called ophiolites on coastlines. This formula was designed based on the TM or ETM bands of a Landsat 5 or 7 scene. The equations applied to create each output band are as follows:

Band 1 = (Band5 / Band7) x 100
Band 2 = (Band5 / Band1) x 100
Band 3 = (Band3 / Band4) x (Band5 / Band4) x 100

Using a space-delimited list, you will identify the indexes of the five bands required. For example, 1 3 4 5 6. If your input contains six bands in the order expected, you do not need to enter a value in the Band Indexes text box.

Reference: Sultan, M., Arvidson, R.E, Sturchio, N.C. & Guiness, E.A. 1987, "Lithologic mapping in Arid Regions with Landsat thematic mapper data: Meatig Dome, Egypt". Geological Society of America Bulletin 99: 748-762

Transformed SAVI method

The Transformed Soil Adjusted Vegetation Index (TSAVI) is a vegetation index that attempts to minimize soil brightness influences by assuming the soil line has an arbitrary slope and intercept.

TSAVI = (s * (NIR - s * Red - a)) / (a * NIR + Red - a * s + X * (1 + s2))
  • NIR = pixel values from the near-infrared band
  • Red = pixel values from the red band
  • s = the soil line slope
  • a = the soil line intercept
  • X = an adjustment factor that is set to minimize soil noise

Using a space-delimited list, you will identify the NIR and red bands and enter the s, a, and X values in the following order: NIR Red s a X. For example, 3 1 0.33 0.50 1.50.

Reference: Baret, F. and G. Guyot, 1991, "Potentials and limits of vegetation indices for LAI and APAR assessment," Remote Sensing of Environment, Vol. 35, 161–173.

VARI method

The Visible Atmospherically Resistant Index (VARI) is a vegetation index for estimating vegetation fraction quantitatively with only the visible range of the spectrum.

VARI = (Green - Red) / (Green + Red – Blue)
  • Red = pixel values from the red band
  • Green = pixel values from the green band
  • Blue = pixel values from the blue band

Using a space-delimited list, you will identify the red, green, and blue bands in the following order: Red Green Blue. For example, 3 2 1.

Reference: Anatoly A. Gitelson, Yoram J. Kaufman, Robert Stark, and Don Rundquist, 2002, "Novel algorithms for remote estimation of vegetation fraction," Remote Sensing of Environment, Vol. 80, 76–87.

WNDWI method

The Weighted Normalized Difference Water Index (WNDWI) is a water index developed to reduce error typically encountered in other water indices, including water turbidity, small water bodies, or shadow in remote sensing scenes.

WNDWI = [Green – α * NIR – (1 – α) * SWIR ] / [Green + α * NIR + (1 – α) * SWIR]
  • Green = pixel values from the green band
  • NIR = pixel values from the near-infrared band
  • SWIR = pixel values from the shortwave infrared band
  • α = a weighted coefficient ranging from 0 to 1. The default value is 0.5.

Using a space-delimited list, you will identify the green, NIR and SWIR bands and the α coefficient in the following order: Green NIR SWIR α. For example, 2 5 6 0.5.

Reference: Qiandong Guo, Ruiliang Pu, Jialin Li & Jun Cheng, 2017, "A weighted normalized difference water index for water extraction using Landsat imagery," International Journal of Remote Sensing, Vol. 38, 5430-5445.

Parameters

ParameterDescription

Raster

The input raster.

Method

The type of band arithmetic algorithm you want to deploy. You can define a custom algorithm, or choose a predefined index.

User Defined—Define a custom band arithmetic expression.

NDVI—Normalized Difference Vegetation Index

SAVI—Soil Adjusted Vegetation Index

Transformed SAVI—Transformed Soil Adjusted Vegetation Index

Modified SAVI—Modified Soil Adjusted Vegetation Index

GEMI—Global Environmental Monitoring Index

PVI—Perpendicular Vegetation Index

GVI (Landsat TM)—Green Vegetation Index Landsat TM

Sultan's Formula—Sultan's Formula

VARI—Visible Atmospherically Resistant Index

GNDVI—Green Normalized Difference Vegetation Index

SR—Simple Ratio

NDVIre—Red-Edge Normalized Difference Vegetation Index

SRre—Simple Ratio

MTVI2—Modified Triangulated Vegetation Index (second iteration)

RTVICore—Red Edge Triangulated Vegetation Index

Clre—Chlorophyll Index - Red Edge

Clg—Chlorophyll Index - Green

NDWI—Normalized Difference Water Index

EVI—Enhanced Vegetation Index

Iron Oxide—Iron Oxide Ratio

Ferrous Minerals—Ferrous Minerals Ratio

Clay Minerals—Clay Minerals Ratio

WNDWI—Weighted Normalized Difference Water Index

Band Indexes

Define your band arithmetic formula if you chose User Defined for the Method parameter.

If you chose a predefined index for the Method parameter, define the proper bands of your input raster dataset that correspond to the index.

Related topics


In this topic
  1. Overview
  2. Notes
  3. Parameters