Configure a web feature layer

This workflow explains how to modify the default configuration of a web feature layer. To begin the sharing process, set general properties, and finish sharing, see Share a web feature layer.

You can configure a web feature layer to allow users to edit the underlying data, sync changes back to the database, and export data to other formats. A number of service level parameters can also be configured.

The properties that can be configured depend on whether you are sharing to ArcGIS Online or ArcGIS Enterprise. If you are sharing to ArcGIS Enterprise, configurable properties also depend on your software version and whether you reference registered data or copy data to the server. If the following steps don't match your experience exactly, use the table at the bottom of the page to see which properties are configurable for the portal you are sharing to.

Configure layers

    Follow these steps to configure operations and properties for your web feature layer.

  1. If necessary, open the Share As Web Layer pane.

    On the General tab, under Layer Type, the layer type is Feature.

  2. Click the Configuration tab. If necessary, click the Configure Layers tab Configure Layers below it.
  3. Under Layer(s), next to Feature, click the Configure Web Layer Properties button Configure Web Layer Properties.
  4. Under Operations, check the Enable editing and allow editors to check box to enable web feature layer editing and choose which editing operations are permitted.

    Add, update, and delete features

    Editors can update and delete feature geometry and alter the attributes of features. This is the default.

    Update feature attributes only

    Editors can enter attribute information for existing features. They cannot add new features or modify or delete existing feature geometry.

    Add features only

    Editors can add new features and enter attribute information for these new features only. They cannot modify or delete existing feature geometry or attribute information.

    If you are sharing to ArcGIS Enterprise and referencing registered data, editing is enabled by default. If you are sharing to ArcGIS Enterprise and copying data to the server, or if you are sharing to ArcGIS Online, editing is not enabled by default.

    Caution:

    If you reference registered data, editing operations cannot be modified through the website for your ArcGIS organization; use ArcGIS Server Manager instead. For more information, see Edit service properties in Server Manager in the ArcGIS Enterprise help.

  5. Check the Enable Sync box to allow users to work with a local copy of the data when they are offline and to synchronize changes when they are online.
  6. Check the Export Data check box to allow others to export the data to different formats.
  7. Under Properties, check the Allow geometry updates check box to allow edits to the geometry of a feature.

    The option to allow geometry updates appears only when you share to an ArcGIS Enterprise portal and reference registered data.

    The Allow update of true curves check box is enabled by default to allow web clients to update the true curve geometry of a feature with densified geometry.

    The Only allow true curve updates by true curve clients check box is enabled by default to only allow clients that support true curves, such as ArcGIS Pro, to update true curve geometries.

    When sharing to servers earlier than 10.5, the options to allow update of true curves and only allow true curve updates by true curve clients are not checked by default.

  8. Check the Apply default to features with z-value check box to allow editors to add or update features through clients that don't allow a z-value to be given.
    1. Specify a value for Default z-value when inserting or updating features.
  9. Check the Allow geometry updates without m-value check box to allow geometry updates to m-enabled features without specifying an m-value.
  10. Optionally, check the Preserve editor tracking info check box.

    This option does not appear when you share to an ArcGIS Enterprise portal and reference registered data.

    Not checked

    Editor tracking information is not preserved. Attribute values in editor tracking fields are overwritten with the account credentials (user name) of the user sharing the web layer and the web layer publishing timestamp. This is the default.

    Checked

    Editor tracking information is preserved. Attribute values are not overwritten.

    Note:

    Features created before the layer is shared may store names in editor tracking fields that don't match user names in your ArcGIS organization. For example, they may store a user name from a desktop computer or database. When you subsequently manage the web layer in your portal, you may want to restrict editing privileges so that editors can edit only features they have created themselves. (On the web layer's item details page, on the Settings tab, this option is called What features can editors edit?) If you make this restriction, and if you also chose to preserve editor tracking information, no one in your organization—except administrators—can edit existing features in the web layer because no one is recognized as the creator of those features. This is the main reason to consider not preserving editor tracking information.

    Learn more about editor tracking.

  11. If you are sharing branch versioned data with a topology layer and reference registered data, Include topology layer is checked by default. Optionally uncheck the box to not include the topology layer in the web feature layer.

    This option does not appear when you share to an ArcGIS Enterprise 10.8 portal or earlier.

  12. Optionally choose a Sync option. Additional sync options are available if you checked the Enable Sync check box, are sharing to an ArcGIS Enterprise 10.8.1 portal or later, and the Data option on the General tab is set to Reference registered data. A default selection is provided based on the data's versioning type.

    Create a version for each downloaded map

    Create a version from the published version each time a map is taken offline. This is the default if your data's versioning type is traditional.

    Create a version for each user

    Create a version for each user who downloads the map.

    None

    No version is created when the map is downloaded. This is the default if branch versioned data is present.

    The following table shows valid sync options for each versioning type. Choose the sync option that best suits your offline work.

    Branch

    • Create a version for each downloaded map
    • None

    Traditional

    • Create a version for each downloaded map
    • Create a version for each user
  13. At the top of the pane, click the Back button Back to return to the list of layers and additional layers.
  14. Optionally, under Additional Layers, check the WFS box to create a WFS layer.
    Note:

    Include a WFS layer when an Open Geospatial Consortium (OGC) compliant layer is needed to serve features with geometry and attributes that clients can use in any type of geospatial analysis. If you share to ArcGIS Enterprise with the Reference registered data option, there are additional requirements for WFS layers.

    For a list of WFS properties that can be configured, see Available WFS service properties in the ArcGIS Enterprise help. If you share to ArcGIS Online or ArcGIS Enterprise with the Copy all data option, Enable transactions cannot be set. Also, the service properties are set by the metadata of the content being shared and cannot be changed.

Configure parameters

    Complete the following steps to configure parameters for your web feature layer. For more information, see Service parameters.

  1. At the top of the pane, under the Configuration tab, click Configure parameters Configure parameters.
  2. Under Properties, specify a value for Maximum records returned by server.

    This property appears if you are sharing to ArcGIS Enterprise. It specifies the number of records that can be returned by a user query. A large number may result in slower performance. The default value is 2,000.

  3. Optionally, under Date Fields, click the Time zone drop-down arrow and choose the time zone in which your date values are stored.

    If your feature layer attribute table contains date fields, specifying the time zone allows date and time values to be converted correctly when users interact with the table. If you choose a time zone other than UTC (coordinated universal time) and you want the time zone to account for daylight saving time, check Adjust For Daylight Saving.

    Note:

    If you don't specify a time zone, date values are assumed to be stored in UTC.

Configurable web feature layer properties

Active portal ArcGIS OnlineArcGIS Enterprise 10.8.1 and laterArcGIS Enterprise 10.8 and laterArcGIS Enterprise 10.5.1 through 10.8ArcGIS Enterprise 10.5.1 through 10.7.1ArcGIS Enterprise 10.5Portal for ArcGIS 10.4 and 10.4.1Portal for ArcGIS 10.3.1 or earlier

Data option

Reference registered data

Copy all data

Reference registered data

Copy all data

Reference registered data

Copy all data

Reference registered data

Copy all data

Enable Sync

Supported

Supported

Supported

Supported

Supported

Supported

Supported

Supported

Export Data

Supported

Supported

Supported

Supported

Supported

Supported

Supported

Supported

Allow geometry updates

Supported

Supported

Supported

Supported

Allow update of true curves

Supported

Supported

Supported

Supported

Only allow true curve updates by true curve clients

Supported

Supported

Supported

Apply default to features with z-value

Supported

Supported

Supported

Supported

Supported

Supported

Supported

Supported

Supported

Supported

Default z-value when inserting or updating features

Supported

Supported

Supported

Supported

Supported

Supported

Supported

Supported

Allow geometry updates without m-values

Supported

Supported

Supported

Supported

Supported

Supported

Supported

Preserve editor tracking info

Supported

Supported

Include topology layer

Supported

Sync Options

Supported

Configurable properties by active portal and data option

Related topics