LAS Dataset To Raster function

Available with Standard or Advanced license.

Overview

The LAS Dataset To Raster function is used to render lidar data managed using the LAS dataset. The function will be used when you add lidar data to a mosaic dataset using the LAS Dataset raster type. With this function, you need to specify both input and output properties. Due to the resolution of the data and the time it can take to convert the point data to raster data, this function will write preprocessed raster data files to an output location (as cache).

Notes

The function will be used when you add multipoint data to a mosaic dataset. When adding the data to a mosaic dataset, you need to open the properties to define some of the input and output properties, such as pixel size.

LAS is an industry format created and maintained by the American Society for Photogrammetry and Remote Sensing (ASPRS). This function supports version 1.0, 1.1, 1.2, and 1.3.

Input Properties control the selection of different aspects of the LAS dataset to be processed, such as the type of return, classification type, and data type.

It's important to understand that the point spacing estimates are for either all points or only the points per return type or class type. For example, with first or last return types, the point density is high, whereas if you select fifth return types only, the point density will be much less and the average point spacing will be much higher. Typically, the Ground class type has many points, but there will be many voids due to buildings or trees that are removed. If you select buildings only or large trees only, there are even more voids and, therefore, a smaller point density and larger average point spacing.

It is better to go with a pixel size that is several times larger than the average point spacing but small enough to identify gaps or voids. A reasonable size is four times the point spacing. For example, if your data is sampled at 1 meter and your pixel size is 4, you can expect, on average, to get 16 points in a pixel.

The point spacing can be obtained from the properties of the LAS dataset.

Output Properties affect how the LAS dataset is displayed and how it converted from points to raster.

The output properties are unique to the LAS, LAS dataset, and Terrain raster types. Since the inputs involve some sort of interpolation from points, this can be quite computationally intensive and therefore slow to display. The option to create caches at the base pixel size for the inputs exists to improve performance. Without the cache, you may have to wait several minutes for some surfaces to display.

The output location for the preprocessed raster data files defaults to the location next to the geodatabase where the mosaic dataset is stored for file or personal geodatabases. When using an enterprise geodatabase, the files are stored in the geodatabase by default.

The Z Factor parameter is used to convert elevation units such as between feet and meters.

To convert from feet to meters or vice versa, see the table below. For example, if your z-units are feet and your mosaic dataset's units are meters, you would use a value of 0.3048 to convert your z-units from feet to meters (1 foot = 0.3048 meters).

This is also useful when you have geographic data (such as GCS_WGS84 using latitude and longitude coordinates) where the z-units are in meters. In this case, you need to convert from meters to degrees (0.00001; see below). The values for degree conversions are approximations.

Conversion factor between feet and meters

Conversion factor between feet and meters

From	To
	Feet	Meters
Feet	1	0.3048
Meters	3.28084	1

To apply vertical exaggeration, you must multiply the conversion factor by the exaggeration factor. For example, if both z-values and dataset coordinates are meters and you want to exaggerate by a multiple of 10, the scaling factor would be the unit conversion factor (1 from the table) multiplied by the vertical exaggeration factor (10), or 10. As another example, if the z-values are meters and the dataset is geographic (degrees), you would multiply the unit conversion factor (0.00001) by 10 to get 0.0001.

When you specify a Z factor value, the Arithmetic function is added to the function chain for the item in the mosaic dataset.

Rendering the LAS dataset can be computationally intensive. Without the cache, you may have to wait several minutes for some surfaces to display. The cache is generated when the following occur:

• You view the mosaic dataset where the LAS dataset is used to generate the mosaicked image.
• The overviews are built.
• The Synchronize Mosaic Dataset tool is run with Build Item Cache checked.

The cache will be updated in the following scenarios:

• The input has been updated.
• The cache has been deleted or is missing.
• The function parameters are set to define a different surface than the one that matches the cache (for example, use a different Return type).

Parameters

Properties	Description
LAS Dataset	The name of the LAS dataset containing the LAS files. You can modify this value if the input is moved. Using a folder is recommended when using many LAS files as multiple partial signals.
Pixel Size	The minimum pixel size that will be generated to create the raster. This is a required parameter. Generally, if the pixel size is three times greater than the point spacing, the voids in the data should be filled (unless, for example, the voids are due to water). When specifying a pixel size that is smaller, you will want to use void filling.
Data Type	Defines the value to represent when generating the surface. Two data type choices are available: Elevation—A height (elevation) value will be used. Intensity—Intensity is a measure, collected for every point, of the return strength of the laser pulse that generated the point. It is based, in part, on the reflectivity of the object struck by the laser pulse. Other descriptions for intensity include return pulse amplitude and backscattered intensity of reflection. Keep in mind, reflectivity is a function of the wavelength used, which is most commonly in the near infrared. Intensity is used as an aid in feature detection and extraction, in lidar point classification, and as a substitute for aerial imagery when none is available. If your lidar data includes intensity values, you can make images from them that look something like black-and-white aerial photos. The default data type is Elevation.
Classification	Filters are defined for the points by the provider of the LAS files managed within the LAS dataset. For Classification filters, you can select Any to add all the points regardless of their classification; you can also select more than one. The classification types are listed below. Any Never classified Unclassified Ground Low vegetation Medium vegetation High vegetation Building Noisy low point Model key point Water Rail Road surface Reserved12 Wire guard Wire conductor Transmission tower Wire structure connector Bridge deck High noise
Returns	A single pulse from the lidar sensor can be returned more than once as it reflects off objects at different heights on or above the ground, resulting in pulses returning to the sensor at different times. Therefore, the return type can be used to differentiate ground returns from other returns, such as tree canopy. For the Returns filter, you can select Any to add all the lidar returns, or you can also select more than one. The Return types are First through Fifteenth and Last.
Interpolation Types	There are two interpolation types: Binning—The process of determining the value of a pixel by examining the points that fall within the pixel to determine the final value Triangulation—Uses Delaunay triangulation to create a surface from a network of triangular facets defined by nodes and edges that cover the surface, which is then rasterized. This is recommended for low-density lidar data, when binning can't be used to create an appealing surface, or when zooming in to an area that will cause a low-density lidar surface to be displayed.
Cell assignment type	Determines which z-value to use when generating the raster surface when there is more than one point to consider. Mean—Uses an average z-value Maximum—Uses the largest z-value Minimum—Uses the smallest z-value The default interpolation method is Mean.
Void filling	Voids occur when there are no points collected within the area represented by a pixel in the resultant raster. Voids are often caused by water bodies or by class type selection or exclusion. Void filling is most commonly used when generating a ground surface. Void filling options are listed below: None—No voids will be filled. This is the default. Simple—Computes the average using up to eight neighboring pixels (with values). Only small voids will be filled. Plane Fitting / IDW—A Simple method is applied first and a plane fitting method is used; however, if the fitting error is too large, an inverse distance weighted algorithm is applied. If the width or height of the bounding box around the void is larger than the Maximum width value, the void is not filled. Linear—Uses triangulation to estimate from the plane defined by the terrain triangle that contains the x,y location of a query point. Natural Neighbor—Uses triangulation to estimate z-value by applying area-based weights to the terrain's natural neighbors of a query point. The default value is None.
Maximum Width	The width value used for void filling when using the Plane Fitting / IDW void filling method. This is defined in the units of the LAS file's spatial reference system. No maximum width will be used if this is blank or a value of 0 is entered. This parameter is only exposed when the Void filling method selected is Plane Fitting / IDW.
Interpolation method	Linear—Estimates the z-value from the plane defined by the terrain triangle that contains the x,y location of a query point. Natural Neighbor—Estimates the z-value by applying area-based weights to the terrain's natural neighbors of a query point. This parameter is only valid when the Triangulation interpolation type is used.
Z Factor	The scaling factor used to convert the z-values. The scaling factor has two purposes: To convert the elevation units (such as meters or feet) to the horizontal coordinate units of the dataset, which may be feet, meters, or degrees. To add vertical exaggeration for visual effect.
Cache Path	The location where the cached surfaces will be stored. By default, the cache is generated and stored in a folder next to where the mosaic dataset resides. This folder has the same name as the geodatabase, with a .cache extension. However, if the mosaic dataset is created in an enterprise geodatabase, the cache will be created within that geodatabase.
Number of cached surfaces	The maximum number of caches that can be created using different input properties for this surface, for example, using one interpolation method versus another. Entering a value of 0 will disable caching and will clear an existing cache. The default value is 10.

Properties	Description
Input	The path and name of the LAS files or folder containing the LAS files. You can modify this value if the input is moved. Using a folder is recommended when using many LAS files as multiple partial signals.
Return types	A single pulse from the lidar sensor can be returned more than once as it reflects off objects at different heights on or above the ground, resulting in pulses returning to the sensor at different times. Therefore, the return type can be used to differentiate ground returns from other returns, such as tree canopy. For the Return types filter, you can select Any to add all the lidar returns, or you can also select more than one. The Return types are First through Fifteenth and Last.
Class types	Filters are defined for the points by the provider of the LAS files managed within the LAS dataset. For Class types filters, you can select Any to add all the points regardless of their classification; you can also select more than one. The classification types are listed below. Any Never classified Unclassified Ground Low vegetation Medium vegetation High vegetation Building Noisy low point Model key point Water
Data types	Defines the value to represent when generating the surface. Two data type choices are available: Las Data Z—A height (elevation) value will be used. Las Data Intensity—Intensity is a measure, collected for every point, of the return strength of the laser pulse that generated the point. It is based, in part, on the reflectivity of the object struck by the laser pulse. Other descriptions for intensity include return pulse amplitude and backscattered intensity of reflection. Keep in mind, reflectivity is a function of the wavelength used, which is most commonly in the near infrared. Intensity is used as an aid in feature detection and extraction, in lidar point classification, and as a substitute for aerial imagery when none is available. If your lidar data includes intensity values, you can make images from them that look something like black-and-white aerial photos. The default data type is Las Data Z.
Pixel size	Generally, if the pixel size is three times greater than the point spacing, the voids in the data should be filled (unless, for example, the voids are due to water). When specifying a pixel size that is smaller, you will want to use void filling. The pixel size must be specified when adding the LAS data to the mosaic dataset
Binning	Binning—The process of determining the value of a pixel by examining the points that fall within the pixel to determine the final value
Cell aggregation type	Determines which z-value to use when generating the raster surface when there is more than one point to consider. Maximum—Uses the largest z-value Minimum—Uses the smallest z-value Mean—Uses an average z-value The default is Maximum.
Void filling	Voids occur when there are no points collected within the area represented by a pixel in the resultant raster. Voids are often caused by water bodies or by class type selection or exclusion. Void filling is most commonly used when generating a ground surface. Void filling options are listed below: None—No voids will be filled. This is the default. Simple—Computes the average using up to eight neighboring pixels (with values). Only small voids will be filled. Plane Fitting / IDW—A Simple method is applied first and a plane fitting method is used; however, if the fitting error is too large, an inverse distance weighted algorithm is applied. If the width or height of the bounding box around the void is larger than the Maximum width value, the void is not filled. Linear—Uses triangulation to estimate from the plane defined by the terrain triangle that contains the x,y location of a query point. Natural Neighbor—Uses triangulation to estimate z-value by applying area-based weights to the terrain's natural neighbors of a query point. The default is None.
Maximum width	The width value used for void filling when using the Plane Fitting / IDW void filling method. This is defined in the units of the LAS file's spatial reference system. No maximum width will be used if this is blank or a value of 0 is entered. This parameter is only exposed when the Void filling method selected is Plane Fitting / IDW.
Triangulation	Triangulation—Uses Delaunay triangulation to create a surface from a network of triangular facets defined by nodes and edges that cover the surface, which is then rasterized. This is recommended for low-density lidar data, when binning can't be used to create an appealing surface, or when zooming in to an area that will cause a low-density lidar surface to be displayed.
Interpolation method	The estimation of surface values at unsampled points based on known surface values of surrounding points. Two interpolation methods are available: Linear—Estimates the z-value from the plane defined by the terrain triangle that contains the x,y location of a query point. Natural Neighbor—Estimates the z-value by applying area-based weights to the terrain's natural neighbors of a query point. The default interpolation method is Linear.
Use constraints	By default, the constraints set up in the LAS dataset are not used. Check this option to create surfaces from the LAS dataset using any constraints set up in the dataset.
Z Factor	The scaling factor used to convert the z-values. The scaling factor has two purposes: To convert the elevation units (such as meters or feet) to the horizontal coordinate units of the dataset, which may be feet, meters, or degrees. To add vertical exaggeration for visual effect. The default Z Factor is 1.
Cache folder	The location where the cached surfaces will be stored. By default, the cache is generated and stored in a folder next to where the mosaic dataset resides. This folder has the same name as the geodatabase, with a .cache extension. However, if the mosaic dataset is created in an enterprise geodatabase, the cache will be created within that geodatabase.
Number of cached surfaces	The maximum number of caches that can be created using different input properties for this surface, for example, using one interpolation method versus another. Entering a value of 0 will disable caching and will clear an existing cache. The maximum number of caches that can be created using different input properties for this surface, for example, using one interpolation method versus another. Entering a value of 0 will disable caching and will clear an existing cache. The default value is 10.