Skyline (3D Analyst)

Summary

Generates a line or multipatch feature class containing the results from a skyline or silhouette analysis.

Learn more about how Skyline works

Illustration

Skyline

Usage

  • The Skyline tool can be used to create feature silhouettes that can be extruded into shadow volumes with the Skyline Barrier tool. See further information in How Skyline works.

  • The following fields will be added to the output feature class that contains the skylines:

    • OBSV_PT_ID—The FID of the observer point used to create this skyline.
    • ORIGFTR_ID—FID of the feature, such as a building.
  • The following fields will be added to the output feature class that contains the silhouettes:

    • OBSV_PT_ID—The FID of the observer point used to create this silhouette.
    • ORIGFTR_ID—The FID of the original feature, such as a building, represented by this silhouette.
    • DIR_VECT_X—The X component of the unit vector representing the direction of the light rays from the observer.
    • DIR_VECT_Y—The Y component of the unit vector representing the direction of the light rays from the observer.
    • DIR_VECT_Z—The Z component of the unit vector representing the direction of the light rays from the observer.
    • FEAT_CTR_X—The X component of the center of the envelope of the original feature (for example, building).
    • FEAT_CTR_Y—The Y component of the center of the envelope of the feature.
    • FEAT_CTR_Z—The Z component of the center of the envelope of the feature.
    • BHND_CTR_X—The X component of the center of the envelope of the feature, moved to behind the feature.
    • BHND_CTR_Y—The Y component of the center of the envelope of the feature, moved to behind the feature.
    • BHND_CTR_Z—The Z component of the center of the envelope of the feature, moved to behind the feature.
    • USED_PARLL—Whether the silhouette was created using parallel light rays (1 for yes and 0 for no).
    • MADE_VERT—Whether the silhouette was made vertical, rather than perpendicular to the light rays (1 for yes and 0 for no).
    • MOVED_BHND—Whether the silhouette was moved to behind the feature, rather than staying at its center (1 for yes and 0 for no).

Syntax

arcpy.3d.Skyline(in_observer_point_features, out_feature_class, {in_surface}, {virtual_surface_radius}, {virtual_surface_elevation}, {in_features}, {feature_lod}, {from_azimuth_value_or_field}, {to_azimuth_value_or_field}, {azimuth_increment_value_or_field}, {max_horizon_radius}, {segment_skyline}, {scale_to_percent}, {scale_according_to}, {scale_method}, {use_curvature}, {use_refraction}, {refraction_factor}, {pyramid_level_resolution}, {create_silhouettes})
ParameterExplanationData Type
in_observer_point_features

The 3D points representing observers. Each feature will have its own output.

Feature Layer
out_feature_class

The 3D features that will either be lines that represent the skyline or multipatches that represent silhouettes.

Feature Class
in_surface
(Optional)

The topographic surface that will be used to define the horizon. If no surface is provided, then a virtual surface will be employed using the virtual_surface_radius and virtual_surface_elevation parameters.

LAS Dataset Layer; Mosaic Layer; Raster Layer; TIN Layer; Terrain Layer
virtual_surface_radius
(Optional)

The radius of the virtual surface that will be used to define the horizon when a topographic surface is not provided. The default is 1,000 meters.

The following units are supported:

  • UNKNOWNUnknown
  • INCHESInches
  • FEETFeet
  • YARDSYards
  • MILESMiles
  • MILLIMETERSMillimeters
  • CENTIMETERSCentimeters
  • DECIMETERSDecimeters
  • METERSMeters
  • KILOMETERSKilometers
Linear Unit
virtual_surface_elevation
(Optional)

The elevation of the virtual surface for defining the horizon in lieu of an actual surface. It is ignored if an actual surface is provided. The default is 0.

The following units are supported:

  • UNKNOWNUnknown
  • INCHESInches
  • FEETFeet
  • YARDSYards
  • MILESMiles
  • MILLIMETERSMillimeters
  • CENTIMETERSCentimeters
  • DECIMETERSDecimeters
  • METERSMeters
  • KILOMETERSKilometers
Linear Unit
in_features
[in_features,...]
(Optional)

The features used in determining the skyline. If no features are specified, then the skyline will consist solely of the horizon line as defined by the topographic or virtual surface.

Feature Layer
feature_lod
(Optional)

The level of detail at which each feature should be examined in the skyline analysis.

  • FULL_DETAILEvery edge within the feature is considered in the skyline analysis (only edges of triangles and exterior rings are considered). This time intensive operation is the most precise, and is also the default option.
  • CONVEX_FOOTPRINTThe skyline analysis will use the upper perimeter of the convex hull of each feature's footprint extruded to the elevation of the highest vertex within the feature.
  • ENVELOPE The skyline analysis will use the perimeter of the 3-dimensional feature envelope. This is the fastest technique.
String
from_azimuth_value_or_field
(Optional)

The azimuth, in degrees, from which the skyline analysis should be started. The analysis starts from the observer point and goes to the right, from the From Azimuth until the To Azimuth is reached. Must be greater than minus 360 and less than 360. The default is 0.

Double; Field
to_azimuth_value_or_field
(Optional)

The direction, in degrees, at which the skyline analysis should be completed. The analysis starts from the observer point and goes to the right, from the From Azimuth until the To Azimuth is reached. Must be no more than 360 greater than the From Azimuth. The default is 360.

Double; Field
azimuth_increment_value_or_field
(Optional)

The angular interval, in degrees, at which the horizon should be evaluated while conducting the skyline analysis between the From Azimuth and the To Azimuth. Must be no greater than the To Azimuth minus the From Azimuth. The default is 1.

Double; Field
max_horizon_radius
(Optional)

The maximum distance for which a horizon should be sought from the observer location. A value of zero indicates that there should be no limit imposed. The default is 0.

The following units are supported:

  • UNKNOWNUnknown
  • INCHESInches
  • FEETFeet
  • YARDSYards
  • MILESMiles
  • MILLIMETERSMillimeters
  • CENTIMETERSCentimeters
  • DECIMETERSDecimeters
  • METERSMeters
  • KILOMETERSKilometers
Linear Unit
segment_skyline
(Optional)

Determines whether the resulting skyline will have one feature for each observer point, or if each observer's skyline will be segmented by the unique elements that contribute to the skyline.

If silhouettes are being generated, then this parameter will indicate whether divergent rays should be used; for sun shadows, this should generally be NO_SEGMENT_SKYLINE

  • NO_SEGMENT_SKYLINEEach skyline feature will represent one observer. This is the default.
  • SEGMENT_SKYLINEEach observer's skyline will be segmented by the unique elements that contribute to the skyline.
Boolean
scale_to_percent
(Optional)

Indicates to what percent of the original vertical angle (angle above the horizon, or angle of elevation) or elevation each skyline vertex should be placed. If either 0 or 100 is entered, then no scaling will occur. The default is 100.

Double
scale_according_to
(Optional)

The values according to which the scaling should be determined.

  • VERTICAL_ANGLEScaling is done by considering the vertical angle of each vertex relative to the observer point. This is the default.
  • ELEVATIONScaling is done by considering the elevation of each vertex relative to the observer point.
String
scale_method
(Optional)

The vertex to be used to calculate against.

  • SKYLINE_MAXIMUMVertices will be scaled relative to the vertical angle (or the elevation) of the vertex with the highest vertical angle (or elevation). This is the default.
  • EACH_VERTEXVertices will be scaled relative to the original vertical angle (or elevation) of each vertex.
String
use_curvature
(Optional)

Indicates whether the earth's curvature should be taken into consideration when generating the ridgeline from a functional surface.

  • CURVATUREThe earth's curvature will be taken into consideration.
  • NO_CURVATUREThe earth's curvature will not be taken into consideration. This is the default.
Boolean
use_refraction
(Optional)

Indicates whether atmospheric refraction will be applied when generating the ridgeline from a functional surface.

  • NO_REFRACTION Atmospheric refraction will not be taken into consideration. This is the default.
  • REFRACTIONAtmospheric refraction will be taken into consideration.
Boolean
refraction_factor
(Optional)

The refraction coefficient to be used if atmospheric refraction is being considered. The default is 0.13.

Double
pyramid_level_resolution
(Optional)

The z-tolerance or window-size resolution of the terrain pyramid level that will be used by this tool. The default is 0, or full resolution.

Double
create_silhouettes
(Optional)

Specifies whether output features will represent skylines or silhouettes.

  • NO_CREATE_SILHOUETTESThe resulting polyline features will represent the skyline. This is the default.
  • CREATE_SILHOUETTESThe resulting multipatch features will represent silhouettes.
Boolean

Code sample

Skyline example 1 (Python window)

The following sample demonstrates the use of this tool in the Python window.

arcpy.env.workspace = "C:/data"
arcpy.Skyline_3d("observers.shp", "skyline_output.shp", "sample.gdb/featuredataset/terrain")
Skyline example 2 (stand-alone script)

The following sample demonstrates the use of this tool in a stand-alone Python script.

'''****************************************************************************
Name: Skyline Example
Description: This script demonstrates how to use the 
             Skyline tool.
****************************************************************************'''
# Import system modules
import arcpy

# Set environment settings
arcpy.env.workspace = 'C:/data'

# Set Local Variables
inPts = "observers.shp"

# Make sure output has a unique name
outFC = arcpy.CreateUniqueName("skyline_output.shp")
inSurface = "sample.gdb/featuredataset/terrain"
obstructionFCs = "buildings.shp; billboards.shp"
surfRad = "1000 meters"
surfElev = "100 meters"
LOD = "FULL_DETAIL"
fromAzim = 0
toAzim = 360
incAzim = 1
maxHorizRad = 0
segSky = "SEGMENT_SKYLINE"
scale = 100
scaleAcc = "ELEVATION"
scaleMethod = "SKYLINE_MAXIMUM"

# Execute Skyline
arcpy.Skyline_3d(inPts, outFC, inSurface, surfRad, surfElev, 
                 obstructionFCs, LOD, fromAzim, toAzim, incAzim, 
                 maxHorizRad, segSky, scale, scaleAcc, scaleMethod)

Licensing information

  • Basic: Requires 3D Analyst
  • Standard: Requires 3D Analyst
  • Advanced: Requires 3D Analyst

Related topics