Apply Block Adjustment (Data Management)

Summary

Applies the geographic adjustments to the mosaic dataset items. This tool uses the solution table from the Compute Block Adjustments tool.

This tool can also reset the geographic adjustments back to the original location.

Usage

  • This tool can be used to apply adjustments from a solution table or reset the geographic alignment back to its original state.

Parameters

LabelExplanationData Type
Input Mosaic Dataset

The input mosaic dataset to adjust.

Mosaic Dataset; Mosaic Layer
Adjustment Operation

Choose whether you want to adjust the mosaic dataset using the solution table or if you want to reset the mosaic dataset so there are no adjustments applied.

  • Adjust the mosaic datasetAdjust the mosaic dataset using the input solution table.
  • Reset the mosaic datasetReset the mosaic dataset so there are no adjustments applied to it.
  • Reactivate image statusImages dropped from the adjustment will be restored to active status. Images without the minimum number of control points required for adjustment are dropped from the computation in the standard adjustment operation, such that the images are categorized as Inactive in the footprints table, the maxPS value is set to 0, the imagery is not visible in the map, and the tie points statuses for the dropped images are disabled. This option will restore the Category status to Primary and ensure the maxPS value is resumed. Images that were included in the adjustment process are unaffected by this option.
String
Input Solution Table
(Optional)

Specify a solution table to use when adjusting your mosaic dataset. This is the output from the Compute Block Adjustments tool.

Table View
Pan-To-MS Scaling Factor
(Optional)

If your mosaic dataset contains pan-sharpened rasters, specify the scaling factor between the pan-sharpened resolution and the multispectral resolution.

Double
Input DEM
(Optional)

A DEM to use within the application of the block adjustment. This DEM will only be used if it is a higher resolution than any DEM that may already exist within the mosaic dataset.

If this input DEM is used, the geometric function of the mosaic dataset will be updated using this input.

Raster Dataset; Raster Layer; Mosaic Dataset; Mosaic Layer
Z offset
(Optional)

The vertical offset used to adjust the elevation layer within the mosaic dataset's Geometric function.

Double
Control Point Table
(Optional)

The input control point table will have the same adjustments applied as the solution table adjustments.

Table View
Adjust Footprints
(Optional)

Choose whether to update the footprint geometry using the same transformation that was applied to the image.

  • Unchecked—Do not update the footprint geometry. This is the default.
  • Checked—Update the footprint geometry to the image geometry. The control point table will also be transformed, if one is provided.

Boolean
Solution Point Table
(Optional)

Specify a solution points table to use to update the status field for the control point table. This parameter is used only when the Control Point Table parameter is set.

Table View

Derived Output

LabelExplanationData Type
Updated Input Mosaic Dataset

The output is the same mosaic dataset as the input; no new mosaic dataset is created. The block adjustment is applied to the original mosaic dataset.

Table View
Output Control Points

The updated control points.

Table View

arcpy.management.ApplyBlockAdjustment(in_mosaic_dataset, adjustment_operation, {input_solution_table}, {pan_to_ms_scaling_factor}, {DEM}, {zoffset}, {control_point_table}, {adjust_footprints}, {solution_point_table})
NameExplanationData Type
in_mosaic_dataset

The input mosaic dataset to adjust.

Mosaic Dataset; Mosaic Layer
adjustment_operation

Choose whether you want to adjust the mosaic dataset using the solution table or if you want to reset the mosaic dataset so there are no adjustments applied.

  • ADJUSTAdjust the mosaic dataset using the input solution table.
  • RESETReset the mosaic dataset so there are no adjustments applied to it.
  • REACTIVATEImages dropped from the adjustment will be restored to active status. Images without the minimum number of control points required for adjustment are dropped from the computation in the standard adjustment operation, such that the images are categorized as Inactive in the footprints table, the maxPS value is set to 0, the imagery is not visible in the map, and the tie points statuses for the dropped images are disabled. This option will restore the Category status to Primary and ensure the maxPS value is resumed. Images that were included in the adjustment process are unaffected by this option.
String
input_solution_table
(Optional)

Specify a solution table to use when adjusting your mosaic dataset. This is the output from the Compute Block Adjustments tool.

Table View
pan_to_ms_scaling_factor
(Optional)

If your mosaic dataset contains pan-sharpened rasters, specify the scaling factor between the pan-sharpened resolution and the multispectral resolution.

Double
DEM
(Optional)

A DEM to use within the application of the block adjustment. This DEM will only be used if it is a higher resolution than any DEM that may already exist within the mosaic dataset.

If this input DEM is used, the geometric function of the mosaic dataset will be updated using this input.

Raster Dataset; Raster Layer; Mosaic Dataset; Mosaic Layer
zoffset
(Optional)

The vertical offset used to adjust the elevation layer within the mosaic dataset's Geometric function.

Double
control_point_table
(Optional)

The input control point table will have the same adjustments applied as the solution table adjustments.

Table View
adjust_footprints
(Optional)

Choose whether to update the footprint geometry using the same transformation that was applied to the image.

  • NO_ADJUST_FOOTPRINTSDo not update the footprint geometry This is the default.
  • ADJUST_FOOTPRINTSUpdate the footprint geometry to the image geometry. The control point table will also be transformed, if one is provided.
Boolean
solution_point_table
(Optional)

Specify a solution points table to use to update the status field for the control point table. This parameter is used only when the control_point_table parameter is set.

Table View

Derived Output

NameExplanationData Type
out_mosaic_dataset

The output is the same mosaic dataset as the input; no new mosaic dataset is created. The block adjustment is applied to the original mosaic dataset.

Table View
out_control_point_table

The updated control points.

Table View

Code sample

ApplyBlockAdjustment example 1 (Python window)

This is a Python sample for the ApplyBlockAdjustment tool.

import arcpy
arcpy.ApplyBlockAdjustment_management(
     "c:/BD/BD.gdb/redQB", "ADJUST",
     "c:/BD/BD.gdb/redQB_sol", 0.25)
ApplyBlockAdjustment example 2 (stand-alone script)

This is a Python script sample for the ApplyBlockAdjustment tool.

#apply block adjustment
import arcpy
arcpy.env.workspace = "c:/workspace"

#Apply the block ajustment
mdName = "BD.gdb/redlandsQB"
out_solutionTable = "BD.gdb/redlandsQB_solution"

arcpy.ApplyBlockAdjustment_management(mdName, "ADJUST", 
     out_solutionTable, 0.25)

Environments

This tool does not use any geoprocessing environments.

Licensing information

  • Basic: No
  • Standard: Yes
  • Advanced: Yes

Related topics