Create Replica (Data Management)

Summary

Creates a replica to a geodatabase from a specified list of feature classes, layers, datasets, and tables in an enterprise geodatabase.

Usage

  • All datasets must be from the same enterprise geodatabase.

  • The data that will be replicated must be registered as traditional versioned but not with the option to move edits to base.

  • The connected database user must also have write permissions to the data.

  • For two-way and both types of one-way replicas, all datasets must have a GlobalID column.

  • For check-out and one-way replicas, the child replica geodatabase can be an enterprise or file geodatabase.

  • For two-way and one-way child-to-parent replicas, the child geodatabase must be an enterprise geodatabase.

  • To use archiving for one-way replicas, the parent workspace must be connected to the default version. For one-way child-to-parent replicas, the child workspace must be connected to the default version.

  • You can replicate all of the data in the datasets or replicate subsets of the data. There are three ways to specify the subsets of data to be replicated:

    • Use definition queries on the data.
    • Specify an extent using the geoprocessing Extent environment setting.
    • Use the Geometry Features parameter.

  • For tables, the default filter is Schema Only; only the schema for the table will be replicated. To apply a filter to a table, first create a table view with the desired filters. Then use this as input to the Create Replica tool. See Make Table View for more information. For more information about filters and replication, see Prepare data for replication.

  • The Replica Geometry Features parameter can be used to define the replica geometry. You can also use the Extent environment setting to define the replica geometry.

    • If the Replica Geometry Features parameter is set, it will be used as the replica geometry.
    • If the Replica Geometry Features parameter is not set, the Extent environment will be used as the replica geometry.
    • If neither the Replica Geometry Features parameter nor the Extent environment is specified, the full extent of the data will be used.

  • The replica geometry features can be points, lines, or polygons.

  • A feature layer used for the replica geometry features can contain one or more features. If there is more than one, the geometries are merged, and only data that intersects the merged geometries will be replicated.

  • If filters (such as selection or definition query) have been defined on the replica geometry features, only features that satisfy these filters will be used to define the replica geometry. See Prepare data for replication for more information.

  • The Re-use Schema parameter options are only available for checkout replicas.

Parameters

LabelExplanationData Type
Replica Datasets

The data to be replicated. This list consists of layers and tables referencing versioned, editable data from an enterprise geodatabase.

Table View; Dataset
Replica Type

Specifies the type of replica to create.

  • Two way replica Changes can be sent between child and parent replicas in both directions.
  • One way replicaChanges can be sent from the parent replica to the child replica only.
  • Check out replicaData is replicated, edited, and checked back in one time.
  • One way child to parent replicaChanges can be sent from the child replica to the parent replica only.
String
Geodatabase to replicate data to

The local geodatabase that will host the child replica. Geodata services are used to represent remote geodatabases. The geodatabase can be an enterprise or file geodatabase. For two-way replicas, the child geodatabase must be an enterprise geodatabase. For one-way and check-out replicas, the geodatabase can be a file or enterprise geodatabase. File geodatabases must already exist before running this tool.

Workspace; GeoDataServer
Replica Name

The name that identifies the replica.

String
Replica Access Type
(Optional)

Specifies the type of replica access.

  • FullComplex types (topologies and networks) are supported and the data must be versioned. This is the default.
  • SimpleThe data on the child is not versioned and must be simple. This allows the replica to be interoperable. Nonsimple features in the parent (for example, features in networks and topologies) are converted to simple features (for example, point, line, and polygon feature classes).
String
Initial Data Sender
(Optional)

Specifies which replica can send changes when in disconnected mode. If you are working in a connected mode, this parameter is inconsequential. This ensures that the relative replica doesn't send updates until the changes are first received from the initial data sender.

  • Child data senderThe child replica is the initial data sender. This is the default.
  • Parent data senderThe parent replica is the initial data sender.
String
Expand Feature Classes and Tables
(Optional)

Specifies whether expanded feature classes and tables—such as those in networks, topologies, or relationship classes—will be added.

  • Use defaultsThe expanded feature classes and tables related to the feature classes and tables in the replica will be added. The default for feature classes is to replicate all features intersecting the spatial filter. If no spatial filter has been provided, all features will be included. The default for tables is to replicate the schema only. This is the default.
  • Add with schema onlyOnly the schema for the expanded feature classes and tables will be added.
  • All rowsAll rows for expanded feature classes and tables will be added.
  • Do not addNo expanded feature classes and tables will be added.
String
Re-use Schema
(Optional)

Specifies whether a geodatabase that contains the schema of the data to be replicated will be reused. This reduces the amount of time required to replicate the data. This option is only available for check-out replicas.

  • Do not reuseSchema will not be reused. This is the default.
  • ReuseSchema will be used.
String
Replicate Related Data
(Optional)

Specifies whether rows related to rows already in the replica will be replicated. For example, consider a feature (f1) inside the replication filter and a related feature (f2) from another class outside the filter. Feature f2 is included in the replica if you choose to get related data.

  • Do not get relatedRelated data will not be replicated.
  • Get relatedRelated data will be replicated. This is the default.
String
Replica Geometry Features
(Optional)

The features used to define the area to replicate.

Feature Layer
Use archiving to track changes for 1 way replication
(Optional)

Specifies whether the archive class will be used to track changes instead of the versioning delta tables. This is only available for one-way replicas.

  • ArchivingArchiving will be used to track changes.
  • Do not use archivingArchiving will not be used to track changes. This is the default.
Boolean
Register existing data only
(Optional)

Specifies whether the data already existing in the child geodatabase will be used to define the replica datasets. The datasets in the child geodatabase must have the same names as the datasets in the parent database and be owned by the user that is connected to the child geodatabase.

  • Checked—Data already exists in the child geodatabase and will be used to register the replica.
  • Unchecked—Data in the parent geodatabase will be copied to the child geodatabase. This is the default.

Boolean

Derived Output

LabelExplanationData Type
Output Child Workspace

The output child geodatabase.

Workspace
Output Replica Name

The name of the output replica.

String

arcpy.management.CreateReplica(in_data, in_type, out_geodatabase, out_name, {access_type}, {initial_data_sender}, {expand_feature_classes_and_tables}, {reuse_schema}, {get_related_data}, {geometry_features}, {archiving}, {register_existing_data})
NameExplanationData Type
in_data
[in_data,...]

The data to be replicated. This list consists of layers and tables referencing versioned, editable data from an enterprise geodatabase.

Table View; Dataset
in_type

Specifies the type of replica to create.

  • TWO_WAY_REPLICA Changes can be sent between child and parent replicas in both directions.
  • ONE_WAY_REPLICAChanges can be sent from the parent replica to the child replica only.
  • CHECK_OUTData is replicated, edited, and checked back in one time.
  • ONE_WAY_CHILD_TO_PARENT_REPLICAChanges can be sent from the child replica to the parent replica only.
String
out_geodatabase

The local geodatabase that will host the child replica. Geodata services are used to represent remote geodatabases. The geodatabase can be an enterprise or file geodatabase. For two-way replicas, the child geodatabase must be an enterprise geodatabase. For one-way and check-out replicas, the geodatabase can be a file or enterprise geodatabase. File geodatabases must already exist before running this tool.

Workspace; GeoDataServer
out_name

The name that identifies the replica.

String
access_type
(Optional)

Specifies the type of replica access.

  • FULLComplex types (topologies and networks) are supported and the data must be versioned. This is the default.
  • SIMPLEThe data on the child is not versioned and must be simple. This allows the replica to be interoperable. Nonsimple features in the parent (for example, features in networks and topologies) are converted to simple features (for example, point, line, and polygon feature classes).
String
initial_data_sender
(Optional)

Specifies which replica can send changes when in disconnected mode. If you are working in a connected mode, this parameter is inconsequential. This ensures that the relative replica doesn't send updates until the changes are first received from the initial data sender.

  • CHILD_DATA_SENDERThe child replica is the initial data sender. This is the default.
  • PARENT_DATA_SENDERThe parent replica is the initial data sender.
String
expand_feature_classes_and_tables
(Optional)

Specifies whether expanded feature classes and tables—such as those in networks, topologies, or relationship classes—will be added.

  • USE_DEFAULTSThe expanded feature classes and tables related to the feature classes and tables in the replica will be added. The default for feature classes is to replicate all features intersecting the spatial filter. If no spatial filter has been provided, all features will be included. The default for tables is to replicate the schema only. This is the default.
  • ADD_WITH_SCHEMA_ONLYOnly the schema for the expanded feature classes and tables will be added.
  • ALL_ROWSAll rows for expanded feature classes and tables will be added.
  • DO_NOT_ADDNo expanded feature classes and tables will be added.
String
reuse_schema
(Optional)

Specifies whether a geodatabase that contains the schema of the data to be replicated will be reused. This reduces the amount of time required to replicate the data. This option is only available for check-out replicas.

  • DO_NOT_REUSESchema will not be reused. This is the default.
  • REUSESchema will be used.
String
get_related_data
(Optional)

Specifies whether rows related to rows already in the replica will be replicated. For example, consider a feature (f1) inside the replication filter and a related feature (f2) from another class outside the filter. Feature f2 is included in the replica if you choose to get related data.

  • DO_NOT_GET_RELATEDRelated data will not be replicated.
  • GET_RELATEDRelated data will be replicated. This is the default.
String
geometry_features
(Optional)

The features used to define the area to replicate.

Feature Layer
archiving
(Optional)

Specifies whether the archive class will be used to track changes instead of the versioning delta tables. This is only available for one-way replicas.

  • ARCHIVINGArchiving will be used to track changes.
  • DO_NOT_USE_ARCHIVINGArchiving will not be used to track changes. This is the default.
Boolean
register_existing_data
(Optional)

Specifies whether the data already existing in the child geodatabase will be used to define the replica datasets. The datasets in the child geodatabase must have the same names as the datasets in the parent geodatabase.

  • REGISTER_EXISTING_DATAData already exists in the child geodatabase and will be used to register the replica.
  • DO_NOT_USE_REGISTER_EXISTING_DATAData in the parent geodatabase will be copied to the child geodatabase. This is the default.
Boolean

Derived Output

NameExplanationData Type
out_child_geodatabase

The output child geodatabase.

Workspace
output_replica_name

The name of the output replica.

String

Code sample

CreateReplica example 1 (Python window)

The following Python Window script demonstrates how to use the CreateReplica function in the Python window.

import arcpy
arcpy.env.workspace = "C:/Data/MyData.sde"

arcpy.CreateReplica_management("roads", "ONE_WAY_REPLICA", 
                               "C:\Data\MyTargetGDB.gdb", "MyReplica", "FULL", 
                               "PARENT_DATA_SENDER", "USE_DEFAULTS", 
                               "DO_NOT_REUSE", "TRUE")
CreateReplica example 2 (stand-alone script)

The following Python script demonstrates how to use the CreateReplica function in a stand-alone Python script.

# Name: CreateReplica_Example2.py
# Description: Create a one-way replica of a Feature Dataset to a file geodatabase. 

# Import system modules
import arcpy

# Set workspace
arcpy.env.workspace = "C:/Data/MyData.sde"

# Set local variables
in_data = "Parks" # a feature dataset
replica_type = "ONE_WAY_REPLICA"
output_workspace = "C:\Data\MyTargetGDB.gdb"
replica_name = "MyReplica"
access_type = "FULL"
initial_sender = "PARENT_DATA_SENDER"
expand = "USE_DEFAULTS"
reuse_schema = "DO_NOT_REUSE"
get_related = "GET_RELATED"
replica_geometry = "LA_County"
archiving = "DO_NOT_USE_ARCHIVING"

# Execute CreateReplica
arcpy.CreateReplica_management(in_data, replica_type, output_workspace, 
                               replica_name, access_type, initial_sender, 
                               expand, reuse_schema, get_related, 
                               replica_geometry, archiving)

Licensing information

  • Basic: No
  • Standard: Yes
  • Advanced: Yes

Related topics