Coordinate Table To Ellipse (Defense)

Summary

Creates ellipse features from coordinates stored in a table and input data values.

Usage

• Ellipses are stored as polygons.

• Major axis, minor axis, and orientation values are stored as fields in a table.

• Ellipses are constructed using a major and minor axis. When discussing the major and minor axes of an ellipse, lengths can be given in both full or half values. The Coordinate Table To Ellipse tool assumes values supplied for the major and minor axes are full values. If the Major Field parameter contains 1000.0 units, the ellipse will have a major axis length of 1000.0 from one side of the ellipse, though the center, to the other side of the ellipse.

• The Azimuth Field parameter is measured zero units north (up) in a clockwise direction, for example, 90 degrees is east, 180 degrees is south, and 270 degrees is west.

• The output ellipse feature class will contain individual ellipses for each row in the input table.

Parameters

Dialog

Label	Explanation	Data Type
Input Table	The table containing the source coordinates.	Table View
Output Ellipse Feature Class	The feature class containing the output ellipse polygon features.	Feature Class
X Field (longitude, UTM, MGRS, USNG, GARS, GeoRef)	The field in the input table containing the x or longitude coordinates.	Field
Major Field	The field in the input table containing the major axis values.	Field
Minor Field	The field in the input table containing the minor axis values.	Field
Input Coordinate Format	Specifies the format of the input table coordinates. Decimal Degrees - One Field —Coordinates will be formatted in a decimal degrees coordinate pair stored in a single field with coordinates separated by a space, comma, or slash. Decimal Degrees - Two Fields —Coordinates will be formatted in a decimal degrees coordinate pair stored in two table fields. This is the default. Degrees and Decimal Minutes - One Field —Coordinates will be formatted in a degrees and decimal minutes coordinate pair stored in a single table field with coordinates separated by a space, comma, or slash. Degrees and Decimal Minutes - Two Fields —Coordinates will be formatted in a degrees and decimal minutes coordinate pair stored in two table fields. Degrees, Minutes, and Seconds - One Field —Coordinates will be formatted in a degrees, minutes, and seconds coordinate pair stored in a single table field with coordinates separated by a space, comma, or slash. Degrees, Minutes, and Seconds - Two Fields —Coordinates will be formatted in a degrees, minutes, and seconds coordinate pair stored in two table fields. Global Area Reference System —Coordinates will be formatted in Global Area Reference System. World Geographic Reference System — Coordinates will be formatted in World Geographic Reference System. Universal Transverse Mercator Bands —Coordinates will be formatted in Universal Transverse Mercator coordinate bands. Universal Transverse Mercator Zones —Coordinates will be formatted in Universal Transverse Mercator coordinate zones. United States National Grid —Coordinates will be formatted in United States National Grid. Military Grid Reference System —Coordinates will be formatted in Military Grid Reference System.	String
Distance Units (Optional)	Specifies the unit of measurement for the major and minor axes. Meters — The unit will be meters. This is the default. Kilometers — The unit will be kilometers. Miles —The unit will be miles. Nautical miles —The unit will be nautical miles. Feet —The unit will be feet. US survey feet —The unit will be U.S. survey feet.	String
Y Field (latitude) (Optional)	The field in the input table containing the latitude coordinates. The Y Field (latitude) parameter is used when the Input Coordinate Format parameter is set to Decimal Degrees - Two Fields, Degrees and Decimal Minutes - Two Fields, or Degrees Minutes and Seconds - Two Fields.	Field
Azimuth Field (Optional)	The field in the input table containing the ellipse azimuth values.	Field
Azimuth Units (Optional)	Specifies the unit of measurement for the azimuth field. Degrees —The angle will be degrees. This is the default. Mils —The angle will be mils. Radians —The angle will be radians. Gradians —The angle will be gradians.	String
Output Coordinate System (Optional)	The spatial reference of the output feature class. The default is GCS_WGS_1984.	Spatial Reference

Python

arcpy.defense.CoordinateTableToEllipse(in_table, out_feature_class, x_or_lon_field, major_field, minor_field, in_coordinate_format, {distance_units}, {y_or_lat_field}, {azimuth_field}, {azimuth_units}, {coordinate_system})

Name	Explanation	Data Type
in_table	The table containing the source coordinates.	Table View
out_feature_class	The feature class containing the output ellipse polygon features.	Feature Class
x_or_lon_field	The field in the input table containing the x or longitude coordinates.	Field
major_field	The field in the input table containing the major axis values.	Field
minor_field	The field in the input table containing the minor axis values.	Field
in_coordinate_format	Specifies the format of the input table coordinates. DD_1 —Coordinates will be formatted in a decimal degrees coordinate pair stored in a single field with coordinates separated by a space, comma, or slash. DD_2 —Coordinates will be formatted in a decimal degrees coordinate pair stored in two table fields. This is the default. DDM_1 —Coordinates will be formatted in a degrees and decimal minutes coordinate pair stored in a single table field with coordinates separated by a space, comma, or slash. DDM_2 —Coordinates will be formatted in a degrees and decimal minutes coordinate pair stored in two table fields. DMS_1 —Coordinates will be formatted in a degrees, minutes, and seconds coordinate pair stored in a single table field with coordinates separated by a space, comma, or slash. DMS_2 —Coordinates will be formatted in a degrees, minutes, and seconds coordinate pair stored in two table fields. GARS —Coordinates will be formatted in Global Area Reference System. GEOREF — Coordinates will be formatted in World Geographic Reference System. UTM_BANDS —Coordinates will be formatted in Universal Transverse Mercator coordinate bands. UTM_ZONES —Coordinates will be formatted in Universal Transverse Mercator coordinate zones. USNG —Coordinates will be formatted in United States National Grid. MGRS —Coordinates will be formatted in Military Grid Reference System.	String
distance_units (Optional)	Specifies the unit of measurement for the major and minor axes. METERS —The unit will be meters. This is the default. KILOMETERS —The unit will be kilometers. MILES —The unit will be miles. NAUTICAL_MILES —The unit will be nautical miles. FEET —The unit will be feet. US_SURVEY_FEET —The unit will be U.S. survey feet.	String
y_or_lat_field (Optional)	The field in the input table containing the latitude coordinates. The y_or_lat_field parameter is used when the in_coordinate_format parameter is set to DD_2, DDM_2, or DMS_2.	Field
azimuth_field (Optional)	The field in the input table containing the ellipse azimuth values.	Field
azimuth_units (Optional)	Specifies the unit of measurement for the azimuth field. DEGREES —The angle will be degrees. This is the default. MILS —The angle will be mils. RADS —The angle will be radians. GRADS —The angle will be gradians.	String
coordinate_system (Optional)	The spatial reference of the output feature class. The default is GCS_WGS_1984.	Spatial Reference

Code sample

CoordinateTableToEllipse example 1 (Python window)

The following Python window script demonstrates how to use the CoordinateTableToEllipse function.

import arcpy
arcpy.env.workspace = r"C:/Data.gdb"
arcpy.CoordinateTableToEllipse_defense(r"C:/CSV/TableToEllipse.csv",
                                       "Out_Ellipses",
                                       "x",
                                       "Major",
                                       "Minor",
                                       "DD_2",
                                       "KILOMETERS",
                                       "y",
                                       "Orient",
                                       "DEGREES")

CoordinateTableToEllipse example 2 (stand-alone script)

Create ellipses from tabular data and merge them into a single feature.

# Description: Create ellipses from tabular data and create a single feature 
#              representing area coverage of ellipses.

# Import system modules
import arcpy

# Set environment setting
sarcpy.env.workspace = r"C:/Data.gdb"
arcpy.env.overwriteOutput = True

# Create ellipses
input_table = r"C:/CSV/TableToEllipse.csv"
result_ellipse = "Output_Ellipse"
arcpy.CoordinateTableToEllipse_defense(input_table,
                                       result_ellipse, 
                                       "x",
                                       "Major",
                                       "Minor",
                                       "DD_2",
                                       "KILOMETERS",
                                       "y",
                                       "Orient",
                                       "DEGREES")

# Union resulting ellipses
result_union = "Output_Union"
arcpy.Union_analysis(result_ellipse, result_union)

# Dissolve polygons into one feature
result_dissolve = "Output_Dissolve"
arcpy.Dissolve_management(result_union, result_dissolve)

Environments

Output Coordinate System, Current Workspace, Scratch Workspace

Licensing information

• Basic: Yes
• Standard: Yes
• Advanced: Yes