Overlay Route Events (Linear Referencing)—ArcGIS Pro

Summary

Overlays two event tables to create an output event table that represents the union or intersection of the input.

Usage

Line-on-line, line-on-point, point-on-line, and point-on-point event overlays can be performed.
The input and overlay events should be based on the same route reference.
The input tables can be any type of table that ArcGIS supports. The output table can be a dBASE file or a geodatabase table.
The output table can be displayed in a map using the Make Route Event Layer tool.
If both the input and overlay event properties are type Point, the output event properties must also be defined as type Point.
If both the input and overlay event properties are type Line, the output event properties must also be defined as type Line.
If either the input or overlay event properties are type Point, the output event properties must be defined as type Point when an Intersect overlay is performed. The output event properties must be defined as type Line when a Union overlay is performed.
If both the input and overlay event properties are type Point, only the points that have the exact same measure value are considered to intersect. There is no search tolerance.
An attribute index on the route identifier field speeds up the dynamic segmentation process. If you will be using the Output Event Table for dynamic segmentation, it is recommended that you choose to have an attribute index created.
Use the Make Table View tool prior to this tool to effectively reduce the number of events that will be processed.
If either the input or overlay events do not have an ObjectID field, use the Make Query Table tool prior to this tool to add a virtual ObjectID field.

Parameters

Label	Explanation	Data Type
Input Event Table	The input event table.	Table View
Input Event Table Properties	Parameter consisting of the route location fields and the type of events in the input event table. Route Identifier Field—The field containing values that indicate the route on which each event is located. This field can be numeric or character. Event Type—The type of events in the input event table (POINT or LINE). POINT—Point events occur at a precise location along a route. Only a from-measure field must be specified. LINE—Line events define a portion of a route. Both from- and to-measure fields must be specified. From-Measure Field—A field containing measure values. This field must be numeric and is required when the event type is POINT or LINE. Note when the Event Type is POINT, the label for this parameter becomes Measure Field. To-Measure Field—A field containing measure values. This field must be numeric and is required when the event type is LINE.	Route Measure Event Properties
Overlay Event Table	The overlay event table.	Table View
Overlay Event Table Properties	Parameter consisting of the route location fields and the type of events in the overlay event table. Route Identifier Field—The field containing values that indicate which route each event is along. This field can be numeric or character. Event Type—The type of events in the overlay event table (POINT or LINE). POINT—Point events occur at a precise location along a route. Only a from-measure field must be specified. LINE—Line events define a portion of a route. Both from- and to-measure fields must be specified. From-Measure Field—A field containing measure values. This field must be numeric and is required when the event type is POINT or LINE. Note when the Event Type is POINT the label for this parameter becomes "Measure Field". To-Measure Field—A field containing measure values. This field must be numeric and is required when the event type is LINE.	Route Measure Event Properties
Type of Overlay	The type of overlay to be performed. Intersect — Writes only overlapping events to the output event table. This is the default. Union — Writes all events to the output table. Linear events are split at their intersections.	String
Output Event Table	The table to be created.	Table
Output Event Table Properties	Parameter consisting of the route location fields and the type of events that will be written to the output event table. Route Identifier Field—The field that will contain values that indicate the route on which each event is located. Event Type—The type of events the output event table will contain (POINT or LINE). POINT—Point events occur at a precise location along a route. Only a single measure field must be specified. LINE—Line events define a portion of a route. Both from- and to-measure fields must be specified. From-Measure Field—A field that will contain measure values. Required when the event type is POINT or LINE. Note when the Event Type is POINT, the label for this parameter becomes Measure Field. To-Measure Field—A field that will contain measure values. Required when the event type is LINE.	Route Measure Event Properties
Keep zero length line events (Optional)	Specifies whether to keep zero length line events in the output table. This parameter is only valid when the output event type is LINE. Checked—Keep zero length line events. This is the default. Unchecked—Do not keep zero length line events.	Boolean
Include all fields from input (Optional)	Specifies whether all the fields from the input and overlay event tables will be written to the output event table. Checked—Includes all the fields from the input tables in the output table. This is the default. Unchecked—Does not include all the fields from the input tables in the output table. Only the ObjectID and the route location fields are kept.	Boolean
Build index (Optional)	Specifies whether an attribute index will be created for the route identifier field that is written to the output event table. Checked—Creates an attribute index. This is the default. Unchecked—Does not create an attribute index.	Boolean

arcpy.lr.OverlayRouteEvents(in_table, in_event_properties, overlay_table, overlay_event_properties, overlay_type, out_table, out_event_properties, {zero_length_events}, {in_fields}, {build_index})

Name	Explanation	Data Type
in_table	The input event table.	Table View
in_event_properties	Parameter consisting of the route location fields and the type of events in the input event table. Route Identifier Field—The field containing values that indicate the route on which each event is located. This field can be numeric or character. Event Type—The type of events in the input event table (POINT or LINE). POINT—Point events occur at a precise location along a route. Only a from-measure field must be specified. LINE—Line events define a portion of a route. Both from- and to-measure fields must be specified. From-Measure Field—A field containing measure values. This field must be numeric and is required when the event type is POINT or LINE. Note when the Event Type is POINT, the label for this parameter becomes Measure Field. To-Measure Field—A field containing measure values. This field must be numeric and is required when the event type is LINE.	Route Measure Event Properties
overlay_table	The overlay event table.	Table View
overlay_event_properties	Parameter consisting of the route location fields and the type of events in the overlay event table. Route Identifier Field—The field containing values that indicate which route each event is along. This field can be numeric or character. Event Type—The type of events in the overlay event table (POINT or LINE). POINT—Point events occur at a precise location along a route. Only a from-measure field must be specified. LINE—Line events define a portion of a route. Both from- and to-measure fields must be specified. From-Measure Field—A field containing measure values. This field must be numeric and is required when the event type is POINT or LINE. Note when the Event Type is POINT the label for this parameter becomes "Measure Field". To-Measure Field—A field containing measure values. This field must be numeric and is required when the event type is LINE.	Route Measure Event Properties
overlay_type	The type of overlay to be performed. INTERSECT —Writes only overlapping events to the output event table. This is the default. UNION —Writes all events to the output table. Linear events are split at their intersections.	String
out_table	The table to be created.	Table
out_event_properties	Parameter consisting of the route location fields and the type of events that will be written to the output event table. Route Identifier Field—The field that will contain values that indicate the route on which each event is located. Event Type—The type of events the output event table will contain (POINT or LINE). POINT—Point events occur at a precise location along a route. Only a single measure field must be specified. LINE—Line events define a portion of a route. Both from- and to-measure fields must be specified. From-Measure Field—A field that will contain measure values. Required when the event type is POINT or LINE. Note when the Event Type is POINT, the label for this parameter becomes Measure Field. To-Measure Field—A field that will contain measure values. Required when the event type is LINE.	Route Measure Event Properties
zero_length_events (Optional)	Specifies whether to keep zero length line events in the output table. This parameter is only valid when the output event type is LINE. ZERO —Keeps zero length line events. This is the default. NO_ZERO —Does not keep zero length line events.	Boolean
in_fields (Optional)	Specifies whether all the fields from the input and overlay event tables will be written to the output event table. FIELDS —Includes all the fields from the input tables in the output table. This is the default. NO_FIELDS —Does not include all the fields from the input tables in the output table. Only the ObjectID and the route location fields are kept.	Boolean
build_index (Optional)	Specifies whether an attribute index will be created for the route identifier field that is written to the output event table. INDEX —Creates an attribute index. This is the default. NO_INDEX —Does not create an attribute index.	Boolean

Code sample

OverlayRouteEvents example 1 (Python window)
import arcpy
arcpy.env.workspace = "C:/Data"
arcpy.OverlayRouteEvents_lr("accident.dbf", "rkey POINT mile", "pavecond.dbf", 
                            "rkey LINE fmp tmp", "INTERSECT", "accpav", 
                            "rkey POINT mile" )

OverlayRouteEvents example 2 (stand-alone script)

The following Python script demonstrates how to use the OverlayRouteEvents function in a stand-alone Python script.

# Description: Point-on-line INTERSECT overlay (both tables are dBASE)

# Import system modules 
import arcpy

# Set workspace
arcpy.env.workspace = "C:/Data"

# Set local variables
in_tbl = "accident.dbf"
in_props = "rkey POINT mile"  # reused as out event properties
ov_tbl = "pavecond.dbf"
ov_props = "rkey LINE fmp tmp"
out_tbl = "accpav"

# Execute OverlayRouteEvents
arcpy.OverlayRouteEvents_lr(in_tbl, in_props, ov_tbl, ov_props, "INTERSECT", 
                            out_tbl, in_props)

OverlayRouteEvents example 3 (stand-alone script)

The following Python script demonstrates how to use the OverlayRouteEvents function in a stand-alone Python script using file geodatabase data.

# Description: Line-on-line UNION overlay (both tables are in a file 
#              geodatabase)

# Import system modules
import arcpy

# Set workspace
arcpy.env.workspace = "C:/Data/Pitt.gdb"

# Set local variables
in_tbl = "pavecond"
in_props = "rkey LINE fmp tmp"  # reused as overlay and out event properties
ov_tbl = "pavetype"
out_tbl = "condtype" 

# Execute OverlayRouteEvents
arcpy.OverlayRouteEvents_lr(in_tbl, in_props, ov_tbl, in_props, "UNION", 
                            out_tbl, in_props, "NO_ZERO")

OverlayRouteEvents example 4 (stand-alone script)

The following Python script demonstrates how to use the OverlayRouteEvents function in a stand-alone Python script using enterprise geodatabase data.

# Description: Point-on-line INTERSECT overlay (both tables are in enterprise 
#              geodatabase)

# Import system modules 
import arcpy

# Set workspace
arcpy.env.workspace = "C:/MyProject/myConn.sde"

# Set local variables
in_tbl = arcpy.ValidateTableName("accident", wkspc)
in_props = "rkey POINT mile"  
ov_tbl = arcpy.ValidateTableName("pavecond", wkspc) 
ov_props = "rkey LINE fmp tmp"
out_tbl = "accpav"
out_props = "routekey POINT milepost"  # names are changed for out table

# Execute OverlayRouteEvents
arcpy.OverlayRouteEvents_lr(in_tbl, in_props, ov_tbl, ov_props, "INTERSECT", 
                            out_tbl, out_props)

Environments

Current Workspace, Output CONFIG Keyword, Scratch Workspace

Licensing information

Basic: Yes
Standard: Yes
Advanced: Yes