Available with Location Referencing license.
When route calibration occurs, events are impacted, depending on the configured event behavior for each event layer.
Note:
Events are not updated until the Apply Event Behaviors tool is run after route edits. If you are using conflict prevention on branch versioned data, you are prompted to run Apply Event Behaviors before posting to the default version .
Calibration can occur on a route when one or more calibration points are added, edited, deleted, or when recalibration downstream is selected for LRS route editing tools.
Calibration point changes can be added using Location Referencing tab calibration tools, by creating or editing calibration points using create features in ArcGIS Pro, by using Apply downstream recalibration in Location Referencing route editing tools, or by checking the Record calibration changes for event location updates option when running the Generate Routes tool.
Route calibration scenario
This route calibration scenario involves one route with two existing calibration points. A calibration point at existing measure 10 is changed to 15, resulting in recalibrated measures downstream.
Stay Put behavior
The geographic location of the event is maintained; the measures can change.
Move behavior
The measures from the event are maintained; the geographic location can change.
Retire behavior
The geographic location and measures are maintained; the event retires.
Upstream and downstream sections
Route editing impacts upstream and downstream sections differently. Review the following images to understand how route edits impact events based on the configured event behavior.
The following image shows the upstream and downstream sections for the pending edit:
The following table details how the calibration editing activity impacts upstream and downstream events according to the configured event behavior:
| Behavior | Events upstream of calibration point edit | Events crossing calibration point edit | Events downstream of calibration point edit |
|---|---|---|---|
Stay Put | Measures on an event update to maintain the geographic location if the event crosses the section between the edited calibration point and the nearest upstream calibration point. | Measures on an event update to maintain the geographic location of the event. | Measures on an event update to maintain the geographic location of the event. If the event crosses the section between the edited calibration point and the nearest upstream calibration point, measures update due to calibration point values changing. |
Move | The event polyline shape updates to the new location of measures on the route if the event crosses the section between the edited calibration point and the nearest upstream calibration point. | The event polyline shape is updated to the new location of measures on the route. | The event polyline shape is updated to the new location of measures on the route if crossing a section of the route with a calibration point with measures is updated. |
Retire | The event retires if the event crosses the section between the edited calibration point and the nearest upstream calibration point. | The event retires; line events crossing the edited calibration point are not split. | The event retires if the event crosses a section of the route with a calibration point with measures updated. |
Note:
- Point events follow the same behavior as line events but don't need to be split.
- If the Recalibrate route downstream option is chosen, the calibrate route event behavior is applied to the events downstream of the edited portion of the route.
- If the network contains events that span multiple routes in a line network, the behaviors are applied in the same manner.
- Since the LRS is time aware, edit activities—such as calibrating or retiring a route—time slice routes and events.
- If the route is calibrated the same day that it's created and the event behavior for calibrate is set to retire, the events are deleted and not retired.
Detailed behavior results
The following sections detail how event behavior rules are enforced when a route is calibrated.
Stay Put event behavior
A calibration point is added to the route at existing measure 10 with an effective date of 1/1/2000. The added calibration point has a new measure of 15 with recalibrate downstream applied and an effective date of 1/1/2005. This calibration has the following effects:
- Event1 is represented by two time slices because the route recalibrated to the nearest upstream calibration point with measure 5. There is a time slice from 1/1/2000 to 1/1/2005 with the original measures from 0 to 7, and a time slice from 1/1/2005 to <Null> that stays in the same location geographically but has the new measures 0 to 9 of Route1.
- Event2 is represented by two time slices because it crosses the location where the recalibration took place on the route. There is a time slice from 1/1/2000 to 1/1/2005 with the original measures from 7 to 15, and a time slice from 1/1/2005 to <Null> that stays in the same location geographically but has the new measures 9 to 20 of Route1.
- Event3 is represented by two time slices because it crosses the location on the route where it was recalibrated downstream. There is a time slice from 1/1/2000 to 1/1/2005 with the original measures from 15 to 20, and a time slice from 1/1/2005 to <Null> that stays in the same location geographically but has the new measures 20 to 25 of Route1.
Before Stay Put event behavior
The following image shows the route before calibration:
The following table provides details about the events before calibration:
| Event | Route Name | From Date | To Date | From Measure | To Measure |
|---|---|---|---|---|---|
Event1 | Route1 | 1/1/2000 | <Null> | 0 | 7 |
Event2 | Route1 | 1/1/2000 | <Null> | 7 | 15 |
Event3 | Route1 | 1/1/2000 | <Null> | 15 | 20 |
After Stay Put event behavior
The following image shows the route after calibration:
The following table provides details about the events after calibration when Stay Put is the configured event behavior:
| Event | Route Name | From Date | To Date | From Measure | To Measure |
|---|---|---|---|---|---|
Event1 | Route1 | 1/1/2000 | 1/1/2005 | 0 | 7 |
Event1 | Route1 | 1/1/2005 | <Null> | 0 | 9 |
Event2 | Route1 | 1/1/2000 | 1/1/2005 | 7 | 15 |
Event2 | Route1 | 1/1/2005 | <Null> | 9 | 20 |
Event3 | Route1 | 1/1/2000 | 1/1/2005 | 15 | 20 |
Event3 | Route1 | 1/1/2005 | <Null> | 20 | 25 |
Move event behavior
A calibration point is added to the route at existing measure 10 with an effective date of 1/1/2000. The added calibration point has a new measure of 15 with recalibrate downstream applied and an effective date of 1/1/2005. This calibration has the following effects:
- Event1 is represented by two time slices because the route recalibrated to the nearest upstream calibration point with measure 5. There is a time slice from 1/1/2000 to 1/1/2005 with the original measures from 0 to 7, and a time slice from 1/1/2005 to <Null> that retains the original event measures from 0 to 7, but for which the geographic x,y location moves to the new location of those measures on the route because the route recalibrated to the nearest upstream calibration point with measure 5.
- Event2 is represented by two time slices because it crosses the location where the recalibration took place on the route. There is a time slice from 1/1/2000 to 1/1/2005 with the original measures from 7 to 15, and a time slice from 1/1/2005 to <Null> with the same measures from 7 to 15 that move to their new location on the route.
- Event3 is represented by two time slices because it crosses the location on the route where it was recalibrated downstream. There is a time slice from 1/1/2000 to 1/1/2005 with the original measures from 15 to 20, and a time slice from 1/1/2005 to <Null> with measures from 15 to 20 that move to their new location on the route.
Before Move event behavior
The following image shows the route before calibration:
The following table provides details about the events before calibration:
| Event | Route Name | From Date | To Date | From Measure | To Measure |
|---|---|---|---|---|---|
Event1 | Route1 | 1/1/2000 | <Null> | 0 | 7 |
Event2 | Route1 | 1/1/2000 | <Null> | 7 | 15 |
Event3 | Route1 | 1/1/2000 | <Null> | 15 | 20 |
After Move event behavior
The following image shows the route after calibration:
The following table provides details about the events after calibration when Move is the configured event behavior:
| Event | Route Name | From Date | To Date | From Measure | To Measure |
|---|---|---|---|---|---|
Event1 | Route1 | 1/1/2000 | 1/1/2005 | 0 | 7 |
Event1 | Route1 | 1/1/2005 | <Null> | 0 | 7 |
Event2 | Route1 | 1/1/2000 | 1/1/2005 | 7 | 15 |
Event2 | Route1 | 1/1/2005 | <Null> | 7 | 15 |
Event3 | Route1 | 1/1/2000 | 1/1/2005 | 15 | 20 |
Event3 | Route1 | 1/1/2005 | <Null> | 15 | 20 |
Retire event behavior
A calibration point is added to the route at existing measure 10 with an effective date of 1/1/2000. The added calibration point has a new measure of 15 with recalibrate downstream applied and an effective date of 1/1/2005. This calibration has the following effects:
- Event1 retires because the route recalibrated to the nearest upstream calibration point with measure 5.
- Event2 retires because it crosses the location where the recalibration took place on the route.
- Event3 retires because it crosses the location on the route where it was recalibrated downstream.
Before Retire event behavior
The following image shows the route before calibration:
The following table provides details about the events before calibration:
| Event | Route Name | From Date | To Date | From Measure | To Measure |
|---|---|---|---|---|---|
Event1 | Route1 | 1/1/2000 | <Null> | 0 | 7 |
Event2 | Route1 | 1/1/2000 | <Null> | 7 | 15 |
Event3 | Route1 | 1/1/2000 | <Null> | 15 | 20 |
After Retire event behavior
The following image shows the route after calibration:
The following table provides details about the events after calibration when Retire is the configured event behavior:
| Event | Route Name | From Date | To Date | From Measure | To Measure |
|---|---|---|---|---|---|
Event1 | Route1 | 1/1/2000 | 1/1/2005 | 0 | 7 |
Event2 | Route1 | 1/1/2000 | 1/1/2005 | 7 | 15 |
Event3 | Route1 | 1/1/2000 | 1/1/2005 | 15 | 20 |