	Name	Description
	AlignLabelToLineDirection	Gets or sets a value indicating whether to align the label with the label direction so the label may appear upside down.
	AllowAsymmetricOverrun	Gets or sets a value indicating whether a label may overrun one side of a polygon feature.
	AllowStraddleStacking	Gets or sets a value indicating whether a stacked label may straddle the line feature.
	AlternateLabelExpressionInfo	Gets or sets the ExpressionInfo for the alternate label expression.
	AvoidPolygonHoles	Gets or sets a value indicating whether labels should avoid holes in polygons.
	BackgroundLabel	Gets or sets a value indicating whether to place the label first and allow other labels to be placed over it.
	BoundaryLabelingAllowHoles	Gets or sets a value indicating whether to allow holes in boundary labeling.
	BoundaryLabelingAllowSingleSided	Gets or sets a value indicating whether to allow single sided boundary labeling.
	BoundaryLabelingSingleSidedOnLine	Gets or sets a value indicating whether single sided boundary label is centered on line.
	CanAbbreviateLabel	Gets or sets a value indicating whether to abbreviate the label using an abbreviation dictionary.
	CanFlipStackedStreetLabel	Gets or sets a value indicating whether a stacked label may be flipped over to obtain a better position.
	CanKeyNumberLabel	Gets or sets a value indicating whether to key number the label and feature.
	CanOverrunFeature	Gets or sets a value indicating whether to place the label over end of line or over polygon boundary.
	CanPlaceLabelOnTopOfFeature	Gets or sets a value indicating whether the label can be placed on top of the street feature.
	CanPlaceLabelOutsidePolygon	Gets or sets a value indicating whether to place a label outside the polygon if it does not fit inside.
	CanReduceFontSize	Gets or sets a value indicating whether to reduce the size of the font.
	CanReduceLeading	Gets or sets a value indicating whether the leading can be reduced for a stacked label.
	CanRemoveOverlappingLabel	Gets or sets a value indicating whether to remove the label if it overlaps with other labels.
	CanShiftPointLabel	Gets or sets a value indicating whether to allow the point label to be shifted upon a fixed position.
	CanStackLabel	Gets or sets a value indicating whether to stack the label to obtain a better position.
	CanTruncateLabel	Gets or sets a value indicating whether to truncate the label using an algorithm.
	CanUseAlternateLabelExpression	Gets or sets a value indicating whether an alternate label expression is allowed to be used.
	CenterLabelAnchorType	Gets or sets options to determine where to anchor a centered point label.
	ConnectionType	Gets or sets the options for connecting line features.
	ConstrainOffset	Gets or sets the label constraint options.
	ContourAlignmentType	Gets or sets the options for the contour label alignment.
	ContourLadderType	Gets or sets the options for the contour label ladder types.
	ContourMaximumAngle	Gets or sets the maximum angle at which a contour label may be placed.
	DictionaryName	Gets or sets the name of the abbreviations dictionary referenced by this layer.
	EnableConnection	Gets or sets a value indicating whether to turn off line connection.
	EnablePointPlacementPriorities	Gets or sets a value indicating whether to use user-defined point placement priorities.
	EnablePolygonFixedPosition	Gets or sets a value indicating whether a label is to be placed at a fixed position in the polygon.
	EnableSecondaryOffset	Gets or sets a value indicating whether to place a label at a secondary offset from the line feature.
	FeatureType	Gets or sets the feature type being labeled. (Inherited from ArcGIS.Core.CIM.CIMLabelPlacementProperties)
	FeatureWeight	Gets or sets the feature weight which controls which features may be overlapped and to what extent.
	FontHeightReductionLimit	Gets or sets font height reduction limit. The font may be reduced in height until this limit is reached.
	FontHeightReductionStep	Gets or sets font height reduction step. This is the step interval for font height reduction.
	FontWidthReductionLimit	Gets or sets font width reduction limit. The font may be reduced in width until this limit is reached.
	FontWidthReductionStep	Gets or sets font width reduction step. This is the step interval for font width reduction.
	GraticuleAlignment	Gets or sets a value indicating whether to enable graticule alignment.
	GraticuleAlignmentType	Gets or sets the options for the graticule alignment type.
	IsLabelBufferHardConstraint	Gets or sets a value indicating whether the label buffer is a hard constraint and must be honored.
	IsMinimumSizeBasedOnArea	Gets or sets a value indicating whether the minimum feature size for labeling is based on area.
	IsOffsetFromFeatureGeometry	Gets or sets a value indicating whether to measure the label offset from the feature geometry.
	KeyNumberGroupName	Gets or sets the name of the key number group to use for key numbering the labels.
	LabelBuffer	Gets or sets the label buffer. Increase buffer to stop labels from being placed too close to each other.
	LabelLargestPolygon	Gets or sets a value indicating whether to label only the largest polygon in a compound polygon feature.
	LabelPriority	Gets or sets the label priority. Label priority controls approximate placement order.
	LabelStackingProperties	Gets or sets the label stacking properties for a layer.
	LineFeatureType	Gets or sets the line feature type.
	LinePlacementMethod	Gets or sets the line placement method.
	MaximumCharacterSpacing	Gets or sets the maximum character spacing. Character spacing may be increased up to this limit.
	MaximumLabelOverrun	Gets or sets the maximum distance that a label is allowed to overrun the end of its feature.
	MaximumLabelOverrunUnit	Gets or sets the label overrun unit.
	MaximumWordSpacing	Gets or sets maximum word spacing. The word spacing may be increased up to this limit.
	MinimumEndOfStreetClearance	Gets or sets minimum clearance between street label and street end.
	MinimumFeatureSizeUnit	Gets or sets minimum feature size unit.
	MinimumRepetitionInterval	Gets or sets the interval that must elapse before label is repeated.
	MinimumSizeForLabeling	Gets or sets the minimum size of a line or area feature for it to be labeled.
	MultiPartOption	Gets or sets the option for labeling multi-part shapes.
	NeverRemoveLabel	Gets or sets a value indicating whether to not remove the label if no position is found.
	OffsetAlongLineProperties	Gets or sets the offset along line properties for a layer.
	PointExternalZonePriorities	Gets or sets the properties which control placement of a label around point feature.
	PointPlacementMethod	Gets or sets the point placement method.
	PolygonAnchorPointPerimeterInset	Gets or sets the inset value for perimeter polygon anchor leader anchor points.
	PolygonAnchorPointPerimeterInsetUnit	Gets or sets the unit of the inset value for perimeter polygon anchor points.
	PolygonAnchorPointType	Gets or sets the polygon anchor point type.
	PolygonBoundaryWeight	Gets or sets the feature weight for the boundary of the polygon.
	PolygonExternalZones	Gets or sets the placement priorities associated with zones external to the polygon.
	PolygonFeatureType	Gets or sets the polygon feature type.
	PolygonInternalZones	Gets or sets the placement priorities associated with zones internal to the polygon.
	PolygonPlacementMethod	Gets or sets the polygon placement method.
	PreferHorizontalPlacement	Gets or sets a value indicating whether there is a preference to place the label horizontally.
	PreferLabelNearJunction	Gets or sets a value indicating whether there is a preference for placing a line label near a junction.
	PreferLabelNearJunctionClearance	Gets or sets the preferred clearance for placing a line label near a junction.
	PreferLabelNearMapBorder	Gets or sets a value indicating whether there is a preference for placing a line label near the map border.
	PreferLabelNearMapBorderClearance	Gets or sets the preferred clearance for placing a line label near the map border.
	PreferredEndOfStreetClearance	Gets or sets the preferred clearance between street label and street end.
	PrimaryOffset	Gets or sets the primary offset between label and symbol.
	PrimaryOffsetUnit	Gets or sets the unit of the primary offset.
	RemoveAmbiguousLabels	Gets or sets the method to determine when to remove ambiguous labels.
	RemoveExtraLineBreaks	Gets or sets a value indicating whether extra line breaks are removed from the label text.
	RemoveExtraWhiteSpace	Gets or sets a value indicating whether extra white space characters are removed from the label text.
	RepeatLabel	Gets or sets a value indicating whether to enable the repetition of label along line feature.
	RepetitionIntervalUnit	Gets or sets the label repetition interval unit.
	RotationProperties	Gets or sets the label rotation properties.
	SecondaryOffset	Gets or sets the secondary offset between label and symbol.
	SecondaryOffsetMaximum	Gets or sets the secondary offset maximum.
	SecondaryOffsetMinimum	Gets or sets the secondary offset minimum.
	SecondaryOffsetUnit	Gets or sets the unit of the secondary offset.
	SpreadCharacters	Gets or sets a value indicating whether to spread label characters along line features.
	SpreadWords	Gets or sets a value indicating whether to whether to spread words along line features.
	StrategyPriorities	Gets or sets the priority of a placement strategy when placing text.
	ThinDuplicateLabels	Gets or sets a value indicating whether to remove duplicate labels that lie within a specified distance of each other.
	ThinningDistance	Gets or sets the distance used to control the thinning of duplicate labels.
	ThinningDistanceUnit	Gets or sets the thinning distance unit.
	TruncationExcludedCharacters	Gets or sets the excluded characters used by the truncation strategy. These characters will never be removed by truncation.
	TruncationMarkerCharacter	Gets or sets the marker character used by the truncation strategy.
	TruncationMinimumLength	Gets or sets the minimum length of a label used by the truncation strategy.
	TruncationPreferredCharacters	Gets or sets the preferred characters used by the truncation strategy. These characters will be removed as needed.
	UseExactSymbolOutline	Gets or sets a value indicating whether to use the exact polygon outline of a symbol when measuring the label offset.

	Name	Description
	Clone	Creates a deep copy of CIMMaplexLabelPlacementProperties.
	FromJson	Reconstructs the CIMMaplexLabelPlacementProperties with a specified state from a JSON encoding.
	GetSchema	Not implemented, reserved for future use. (Inherited from ArcGIS.Core.CIM.CIMObject)
	ReadXml	Reads the element inside the reader. (Inherited from ArcGIS.Core.CIM.CIMObject)
	ToJson	Overridden. Creates a JSON encoding of the CIMMaplexLabelPlacementProperties and its current state.
	WriteXml	Writes the element inside the writer. (Inherited from ArcGIS.Core.CIM.CIMObject)

	Name	Description
	RaisePropertyChanged	Called from a property setter to notify the framework that an Object member has changed. (Inherited from ArcGIS.Core.CIM.CIMObject)
	ReadXmlElement	Overridden. Reads the child element inside the reader.
	WriteXmlElements	Overridden. Writes a child element to the writer.

Reference