public new CubicBezierSegment ToSegment()

// Use a builderEx convenience method or a builderEx constructor.

MapPoint startPt = MapPointBuilderEx.CreateMapPoint(1.0, 1.0, 3.0);
MapPoint endPt = MapPointBuilderEx.CreateMapPoint(2.0, 2.0, 3.0);

Coordinate2D ctrl1Pt = new Coordinate2D(1.0, 2.0);
Coordinate2D ctrl2Pt = new Coordinate2D(2.0, 1.0);

// BuilderEx convenience methods don't need to run on the MCT
CubicBezierSegment bezier = CubicBezierBuilderEx.CreateCubicBezierSegment(startPt, ctrl1Pt, ctrl2Pt, endPt, SpatialReferences.WGS84);

// without a SR
bezier = CubicBezierBuilderEx.CreateCubicBezierSegment(startPt, ctrl1Pt, ctrl2Pt, endPt);


// builderEx constructors don't need to run on the MCT
CubicBezierBuilderEx cbbEx = new CubicBezierBuilderEx(startPt, ctrl1Pt, ctrl2Pt, endPt);
bezier = cbbEx.ToSegment() as CubicBezierSegment;

// another alternative
cbbEx = new CubicBezierBuilderEx(startPt, ctrl1Pt.ToMapPoint(), ctrl2Pt.ToMapPoint(), endPt);
bezier = cbbEx.ToSegment() as CubicBezierSegment;

// Use a builderEx convenience method or a builderEx constructor.

MapPoint startPt = MapPointBuilderEx.CreateMapPoint(1.0, 1.0, SpatialReferences.WGS84);
MapPoint endPt = MapPointBuilderEx.CreateMapPoint(2.0, 2.0, SpatialReferences.WGS84);

MapPoint ctrl1Pt = MapPointBuilderEx.CreateMapPoint(1.0, 2.0, SpatialReferences.WGS84);
MapPoint ctrl2Pt = MapPointBuilderEx.CreateMapPoint(2.0, 1.0, SpatialReferences.WGS84);

// BuilderEx convenience methods don't need to run on the MCT
CubicBezierSegment bezier = CubicBezierBuilderEx.CreateCubicBezierSegment(startPt, ctrl1Pt, ctrl2Pt, endPt);

// builderEx constructors don't need to run on the MCT
CubicBezierBuilderEx cbbEx = new CubicBezierBuilderEx(startPt, ctrl1Pt, ctrl2Pt, endPt);
bezier = cbbEx.ToSegment() as CubicBezierSegment;

// Use a buildeExr convenience method or use a builderEx constructor.

MapPoint startPt = MapPointBuilderEx.CreateMapPoint(1.0, 1.0, SpatialReferences.WGS84);
MapPoint endPt = MapPointBuilderEx.CreateMapPoint(2.0, 2.0, SpatialReferences.WGS84);

MapPoint ctrl1Pt = MapPointBuilderEx.CreateMapPoint(1.0, 2.0, SpatialReferences.WGS84);
MapPoint ctrl2Pt = MapPointBuilderEx.CreateMapPoint(2.0, 1.0, SpatialReferences.WGS84);

List<MapPoint> listMapPoints = new List<MapPoint>();
listMapPoints.Add(startPt);
listMapPoints.Add(ctrl1Pt);
listMapPoints.Add(ctrl2Pt);
listMapPoints.Add(endPt);

// BuilderEx convenience methods don't need to run on the MCT
CubicBezierSegment bezier = CubicBezierBuilderEx.CreateCubicBezierSegment(listMapPoints);

// builderEx constructors don't need to run on the MCT
CubicBezierBuilderEx cbbEx = new CubicBezierBuilderEx(listMapPoints);
bezier = cbbEx.ToSegment() as CubicBezierSegment;

//Create a bezier curve element with a simple line style.

//Construct on the worker thread
await QueuedTask.Run(() =>
{
  //Build geometry
  Coordinate2D pt1 = new Coordinate2D(1, 7.5);
  Coordinate2D pt2 = new Coordinate2D(1.66, 8);
  Coordinate2D pt3 = new Coordinate2D(2.33, 7.1);
  Coordinate2D pt4 = new Coordinate2D(3, 7.5);
  //At 2.x - CubicBezierBuilder bez = new CubicBezierBuilder(pt1, pt2, pt3, pt4);
  var bez = new CubicBezierBuilderEx(pt1, pt2, pt3, pt4);
  CubicBezierSegment bezSeg = bez.ToSegment();
  //At 2.x - Polyline bezPl = PolylineBuilder.CreatePolyline(bezSeg);
  Polyline bezPl = PolylineBuilderEx.CreatePolyline(bezSeg);

  //Set symbology, create and add element to layout
  CIMLineSymbol lineSym = SymbolFactory.Instance.ConstructLineSymbol(ColorFactory.Instance.RedRGB, 4.0, SimpleLineStyle.DashDot);
  //At 2.x - GraphicElement bezElm = LayoutElementFactory.Instance.CreateLineGraphicElement(layout, bezPl, lineSym);
  //         bezElm.SetName("New Bezier Curve");
  GraphicElement bezElm = ElementFactory.Instance.CreateGraphicElement(layout, bezPl, lineSym, "New Bezier Curve");
});

//Create curve text with basic text properties.

//Construct on the worker thread
await QueuedTask.Run(() =>
{
  //Build geometry
  Coordinate2D pt1 = new Coordinate2D(3.6, 7.5);
  Coordinate2D pt2 = new Coordinate2D(4.26, 8);
  Coordinate2D pt3 = new Coordinate2D(4.93, 7.1);
  Coordinate2D pt4 = new Coordinate2D(5.6, 7.5);
  //At 2.x - CubicBezierBuilder bez = new CubicBezierBuilder(pt1, pt2, pt3, pt4);
  var bez = new CubicBezierBuilderEx(pt1, pt2, pt3, pt4);
  CubicBezierSegment bezSeg = bez.ToSegment();
  //At 2.x - Polyline bezPl = PolylineBuilder.CreatePolyline(bezSeg);
  Polyline bezPl = PolylineBuilderEx.CreatePolyline(bezSeg);

  //Set symbolology, create and add element to layout
  CIMTextSymbol sym = SymbolFactory.Instance.ConstructTextSymbol(ColorFactory.Instance.BlackRGB, 24, "Comic Sans MS", "Regular");
  //At 2.x - GraphicElement bezTxtElm = LayoutElementFactory.Instance.CreateCurvedTextGraphicElement(layout, bezPl, "Curved Text", sym);
  //         bezTxtElm.SetName("New Splinned Text");
  GraphicElement bezTxtElm = ElementFactory.Instance.CreateTextGraphicElement(
                                layout, TextType.SplinedText, bezPl, sym, "Curved Text", "New Splinned Text");
});

//Must be on QueuedTask.Run(() => { ...
//Build geometry
Coordinate2D pt1 = new Coordinate2D(1, 7.5);
Coordinate2D pt2 = new Coordinate2D(1.66, 8);
Coordinate2D pt3 = new Coordinate2D(2.33, 7.1);
Coordinate2D pt4 = new Coordinate2D(3, 7.5);
var bez = new CubicBezierBuilderEx(pt1, pt2, pt3, pt4);
var bezSeg = bez.ToSegment();
Polyline bezPl = PolylineBuilderEx.CreatePolyline(bezSeg, AttributeFlags.AllAttributes);

//Set symbology, create and add element to layout
CIMLineSymbol lineSym = SymbolFactory.Instance.ConstructLineSymbol(
  ColorFactory.Instance.RedRGB, 4.0, SimpleLineStyle.DashDot);

ElementFactory.Instance.CreateGraphicElement(container, bezPl, lineSym, "New Bezier");

//Must be on QueuedTask.Run(() => { ...

//Build geometry
Coordinate2D pt1 = new Coordinate2D(3.5, 7.5);
Coordinate2D pt2 = new Coordinate2D(4.16, 8);
Coordinate2D pt3 = new Coordinate2D(4.83, 7.1);
Coordinate2D pt4 = new Coordinate2D(5.5, 7.5);
var bez = new CubicBezierBuilderEx(pt1, pt2, pt3, pt4);
var bezSeg = bez.ToSegment();
Polyline bezPl = PolylineBuilderEx.CreatePolyline(bezSeg, AttributeFlags.AllAttributes);

//Set symbolology, create and add element to layout
CIMTextSymbol sym = SymbolFactory.Instance.ConstructTextSymbol(
  ColorFactory.Instance.BlackRGB, 24, "Comic Sans MS", "Regular");

var ge = ElementFactory.Instance.CreateTextGraphicElement(
  container, TextType.SplinedText, bezPl, sym, "this is the bezier text",
        "New Bezier Text", true, new ElementInfo() { Anchor = Anchor.CenterPoint });