Move, rotate, or scale a feature

The Move tool , Rotate tool , and Scale tool manipulate selected features interactively with the pointer or to a specified value. These tools are available in the Modify Features pane.

When you move, rotate, or scale a feature, consider the following:

• To move, rotate, or scale annotation features, use the Annotation tool .
• To move a feature to a specified location, use the Move To tool .

Move a feature

To move a feature, select and drag it with the pointer. The selection anchor snaps the selected features to another feature. When you select multiple features, you can right-click and align or distribute the features.

1. Add your data and configure settings for editing.

   Confirm that the feature layer you are editing is editable, the coordinate system assigned to the active map is suitable for the type of edits you're performing, and snapping is configured to help you work efficiently and accurately.

2. On the ribbon Edit tab, click the topology drop-down arrow in the Manage Edits group, and choose No Topology .

   Turn on map topology to move a topological edge or feature.

   Note:

   When map topology is turned on, rubber band lines preview the topological connectedness of your edits as you move the feature. When the rubber band lines disappear, the connected features are no longer topologically connected and are not edited.

3. On the ribbon Edit tab, click Modify in the Features group.

   The Modify Features pane appears.

4. Click the Move tool in the Modify Features pane.

   To find the tool, expand Alignment, or type Move in the Search text box.

5. Click the Select tool in the pane, and select the features.

   Tip:

   To remove features from the selection in the pane selection view, right-click a feature and click Unselect , or click Only Select This to keep the feature and remove all others from the selection.

   The selection anchor appears at the geometric center (centroid) of the selected features.

6. To move the selection anchor, press Ctrl, hover the pointer over the anchor and drag it when the the pointer changes to the directional cursor .

   The selection anchor snaps to other features using the current snap settings.

7. Hover the pointer over the selected features until the pointer changes to the move cursor, and drag the features to the new location.

   To move a 3D feature in a scene, drag the selection along the x-, y-, or z-axis handle.

8. Click Finish on the toolbar or press F2.

Keyboard shortcuts for Move

Keyboard shortcuts for the Move tool

Keyboard shortcut	Action	Comment
Ctrl and click	Relocate the anchor.	Relocate the selection anchor to the clicked location. You can zoom in to a feature without the current location of the anchor being visible in the active view.
Ctrl and drag	Move the anchor.	Move the selection anchor.

Rotate a feature

To rotate a feature, select and drag it, or press A and type an angle. The selection anchor locates the center of rotation. To rotate and snap the selected features to another feature, press S and use the auxiliary anchor. By default, it appears near the pointer.

1. Add your data and configure settings for editing.

   Confirm that the feature layer you are editing is editable, the coordinate system assigned to the active map is suitable for the type of edits you're performing, and snapping is configured to help you work efficiently and accurately.

2. On the ribbon Edit tab, click the topology drop-down arrow in the Manage Edits group, and choose No Topology .

   Turn on map topology to move a topological edge or feature.

   Note:

   When map topology is turned on, rubber band lines preview the topological connectedness of your edits as you move the feature. When the rubber band lines disappear, the connected features are no longer topologically connected and are not edited.

3. Click the Rotate tool in the Modify Features pane.

   To find the tool, expand Alignment, or type Rotate in the Search text box.

4. Click the Select tool in the pane, and select the features.

   Tip:

   To remove features from the selection in the pane selection view, right-click a feature and click Unselect , or click Only Select This to keep the feature and remove all others from the selection.

   The selection anchor appears at the geometric center (centroid) of the selected features.

5. To snap rotated features to other features, press S and use the auxiliary anchor. By default, it appears near the pointer.

   To move the selection anchor or auxiliary anchor, press Ctrl, hover the pointer over the anchor and drag it when the pointer changes to the directional cursor .

   The selection anchor and auxiliary anchor snap to other features using the current snap settings.

6. Hover over the selected features. When the pointer changes to the rotation cursor, drag the features to rotate them.

   Alternatively, press A and type an angle. A positive value rotates the selection counterclockwise. A negative value rotates the selection clockwise.

   When on-screen constraints is on, press the Tab key, type a rotation angle, and press Enter

7. Click Finish on the toolbar or press F2.

Keyboard shortcuts for Rotate

Keyboard shortcuts for the Rotate tool

Keyboard shortcut	Action	Comment
A	Angle.	Open the Angle dialog box.
Ctrl and click	Relocate the anchor.	Relocate the selection anchor to the clicked location. You can zoom in to a feature without the current location of the anchor being visible in the active view.
Ctrl and drag	Move the anchor.	Move the selection anchor.
S	Access the secondary anchor.	Turn the secondary anchor on and off. When it is turned on, the anchor is positioned at the pointer location.

Scale a feature

To scale a feature, select the feature and drag a control handle, or press F and type a scale factor. The selection anchor locates the center of scaling. To scale and snap the selected features to another feature, press S and use the auxiliary anchor. By default, it appears near the pointer.

1. Add your data and configure settings for editing.

   Confirm that the feature layer you are editing is editable, the coordinate system assigned to the active map is suitable for the type of edits you're performing, and snapping is configured to help you work efficiently and accurately.

2. On the ribbon Edit tab, click the topology drop-down arrow in the Manage Edits group, and choose No Topology .

   Turn on map topology to move a topological edge or feature.

   Note:

   When map topology is turned on, rubber band lines preview the topological connectedness of your edits as you move the feature. When the rubber band lines disappear, the connected features are no longer topologically connected and are not edited.

3. In the pane, expand Alignment and click Scale .
4. Click the Scale tool in the Modify Features pane.

   To find the tool, expand Alignment, or type Scale in the Search text box.

5. Click the Select tool in the pane, and select the features.

   Tip:

   To remove features from the selection in the pane selection view, right-click a feature and click Unselect , or click Only Select This to keep the feature and remove all others from the selection.

   The selection anchor appears at the geometric center (centroid) of the selected features.

6. To snap scaled features to other features, press S and use the auxiliary anchor. By default, it appears near the pointer.

   To move the selection or auxiliary anchor, press Ctrl, hover over the anchor and drag it when the pointer changes to the directional cursor .

   The selection anchor and auxiliary anchor snap to other features using the current snap settings.

7. Hover over the selected features. When the pointer changes to the scale cursor, drag a control handle to scale them.

   Alternatively, press F and type a scale factor.

   To scale a 3D feature in a scene, drag the selection along the x-, y-, or z-axis handle.

8. Click Finish on the toolbar or press F2.

Keyboard shortcuts for Scale

Keyboard shortcuts for the Scale tool

Keyboard shortcut	Action	Comment
F	Apply a scale factor.	Open the Scale dialog box.
Ctrl and click	Relocate the anchor.	Relocate the selection anchor to the clicked location. You can zoom in to a feature without the current location of the anchor being visible in the active view.
Ctrl and drag	Move the anchor.	Move the selection anchor.
S	Access the secondary anchor.	Turn the secondary anchor on and off. When it is turned on, the anchor is positioned at the pointer location.