Graphic Buffer (Analysis)—ArcGIS Pro

Summary

Creates buffer polygons around input features to a specified distance. A number of cartographic shapes are available for buffer ends (caps) and corners (joins) when the buffer is generated around the feature.

Alternate tools are available for buffer operations. See the Pairwise Buffer and Buffer tool documentation for details.

Illustration

Usage

Note:

The output of this tool is intended for cartographic display only. It is not intended for use in further analysis. Using it as such will result in incorrect results.

The input features can be point, line, or polygon. The options available for the buffer output ends (caps) and corners (joins) depend on the input feature type.
- Cap type—Points and lines only
- Join type—Polygons and lines only
The output feature class will include a BUFF_DIST field that contains the buffer distance used to buffer each feature in the linear unit of the input features' coordinate system.
If a BUFF_DIST field exists in the input, its values will be overwritten in the output.
The output buffer features will always be Euclidean. Geodesic buffer features are not supported. See How Buffer (Analysis) works for information about the difference between Euclidean and geodesic buffers.
The output feature class will include an ORIG_FID field that contains the feature ID of the input feature for which the buffer was created. If a ORIG_FID field exists in the input, its values will be overwritten in the output.
When buffering polygon features, negative buffer distances can be used to create buffers inside the polygon features. Using a negative buffer distance will reduce the polygons' boundaries by the distance specified.
Caution:
If the negative buffer distance is large enough to collapse the polygon to nothing, a null geometry will be generated. A warning message will appear, and no null geometry features will be written to the output feature class.
You can use a field from the input to set the buffer distances. Both numeric and text fields are acceptable. In a text field, the buffer distance can be a number, such as 5, or a valid linear unit, such as 5 kilometers.

If using a number without a linear unit, the buffer will be in the linear units of the input's spatial reference. If the input is in a geographic coordinate system, the buffer will be in meters.

If the linear unit is not recognized, the buffer will be in the linear units of the input's spatial reference. To learn more about valid linear units, see Linear units.
This tool honors the Parallel Processing Factor environment. If the environment is not set (the default) or is set to 100, full parallel processing will be enabled and the tool will attempt to distribute the work to all the logical cores on the machine. If the environment is set to 0, parallel processing will not be enabled. If a factor between 1 and 99 is specified, the tool will identify the percentage of logical cores to use by applying the formula (Parallel Processing Factor / 100 * Logical Cores) rounded up to the nearest integer. If the result of this formula is 0 or 1, parallel processing will not be enabled.

Parameters

Label	Explanation	Data Type
Input Features	The input point, line, or polygon features that will be buffered.	Feature Layer
Output Feature Class	The feature class containing the output buffers.	Feature Class
Distance [value or field]	The distance around the input features that will be buffered. Distances can be provided as either a value representing a linear distance or a field from the input features that contains the distance to buffer each feature. If linear units are not specified or are entered as Unknown, the linear unit of the input features' spatial reference will be used.	Linear Unit; Field
Caps Type (Optional)	Specifies the type of caps (ends) of the input features that will be buffered. This parameter is only supported for point and polygon features. Square—The output buffer will have a square cap around the end of the input segment. This is the default. Butt—The output buffer will have a cap perpendicular to the end of the input segment. Round—The output buffer will have a cap that is round at the end of the input segment.	String
Join Type (Optional)	Specifies the shape of the buffer at corners where two segments join. This parameter is only supported for line and polygon features. Miter—The output buffer feature will be a square or sharp shape around corners. For example, a square input polygon feature will have a square buffer feature. This is the default. Bevel—The output buffer feature for inner corners will be squared while the outer corner will be cut perpendicular to the furthest point of the corner. Round—The output buffer feature for inner corners will be squared while the outer corner will be round.	String
Miter Limit (Optional)	Where line segments meet at a sharp angle and the Join Type parameter value has been specified as Miter, this parameter can be used to control how sharp corners in buffer output come to a point. In some cases, the outer angle where two lines join is quite large when using the Miter option. This may cause the point of the corner to extend farther than intended.	Double
Maximum Offset Deviation (Optional)	The maximum distance the output buffer polygon boundary will deviate from the true ideal buffer boundary. The true buffer boundary is a curve, and the output polygon boundary is a densified polyline. Using this parameter, you can control how well the output polygon boundary approximates the true buffer boundary. If the parameter is not set or is set to 0, the tool will identify the maximum deviation. It is recommended that you use the default value. Performance degradation in the tool or in subsequent analysis can result from using a maximum offset deviation value that is too small.	Linear Unit

arcpy.analysis.GraphicBuffer(in_features, out_feature_class, buffer_distance_or_field, {line_caps}, {line_joins}, {miter_limit}, {max_deviation})

Name	Explanation	Data Type
in_features	The input point, line, or polygon features that will be buffered.	Feature Layer
out_feature_class	The feature class containing the output buffers.	Feature Class
buffer_distance_or_field	The distance around the input features that will be buffered. Distances can be provided as either a value representing a linear distance or a field from the input features that contains the distance to buffer each feature. If linear units are not specified or are entered as Unknown, the linear unit of the input features' spatial reference will be used. When specifying a distance, if the linear unit has two words, such as Decimal Degrees, combine the two words into one (for example, 20 DecimalDegrees).	Linear Unit; Field
line_caps (Optional)	Specifies the type of caps (ends) of the input features that will be buffered. This parameter is only supported for point and polygon features. SQUARE—The output buffer will have a square cap around the end of the input segment. This is the default. BUTT—The output buffer will have a cap perpendicular to the end of the input segment. ROUND—The output buffer will have a cap that is round at the end of the input segment.	String
line_joins (Optional)	Specifies the shape of the buffer at corners where two segments join. This parameter is only supported for line and polygon features. MITER—The output buffer feature will be a square or sharp shape around corners. For example, a square input polygon feature will have a square buffer feature. This is the default. BEVEL—The output buffer feature for inner corners will be squared while the outer corner will be cut perpendicular to the furthest point of the corner. ROUND—The output buffer feature for inner corners will be squared while the outer corner will be round.	String
miter_limit (Optional)	Where line segments meet at a sharp angle and the line_joins parameter value has been specified as MITER, this parameter can be used to control how sharp corners in buffer output come to a point. In some cases, the outer angle where two lines join is quite large when using the MITER option. This may cause the point of the corner to extend farther than intended.	Double
max_deviation (Optional)	The maximum distance the output buffer polygon boundary will deviate from the true ideal buffer boundary. The true buffer boundary is a curve, and the output polygon boundary is a densified polyline. Using this parameter, you can control how well the output polygon boundary approximates the true buffer boundary. If the parameter is not set or is set to 0, the tool will identify the maximum deviation. It is recommended that you use the default value. Performance degradation in the tool or in subsequent analysis can result from using a maximum offset deviation value that is too small.	Linear Unit

Code sample

GraphicBuffer example 1 (Python window)

The following Python window script demonstrates how to use the GraphicBuffer function.

import arcpy
arcpy.env.workspace = "C:/data"
arcpy.analysis.GraphicBuffer("roads", "C:/output/majorrdsBuffered", "100 Feet", 
                             "SQUARE", "MITER")

Environments

Default Output Z Value, M Resolution, M Tolerance, Output M Domain, Output XY Domain, Output Z Domain, Output Coordinate System, Extent, Current Workspace, Geographic Transformations, Scratch Workspace, Output has M values, Output has Z values, XY Resolution, XY Tolerance, Z Resolution, Z Tolerance, Parallel Processing Factor

Licensing information

Basic: Yes
Standard: Yes
Advanced: Yes