Add Reduce Junction By Category Rule (Network Diagram)

Summary

Adds a diagram rule to automatically reduce junctions during the building of diagrams based on an existing template. This reduction depends on whether the junctions are tagged with specific network categories.

Learn more about the reduction of junctions in diagrams

Caution:

This tool is a configuration and administration tool.

Note:

This tool impacts the consistency of any existing diagrams based on the input diagram template. All of the existing diagrams become inconsistent and open with a consistency warning icon until they are updated.

Note:

This tool only applies to diagram templates in Utility Network version 7 and later.

Usage

• This tool is not supported when working with a utility network service. You must use either a utility network in a file or mobile geodatabase, or a database connection to a utility network in an enterprise geodatabase. When working with an enterprise geodatabase, the following are requirements:

  • The Input Network parameter value must be from a database connection established as the database utility network owner.
  • The connected ArcGIS Enterprise portal account must be the portal utility network owner.
  • This tool must be connected to the default version, which is expected to be public and not protected.

• The Reduce Junction rule is used to simplify the diagram graph while preserving the topology.

  The Reduce Junction rule is used to simplify the diagram graph while preserving the topology by reducing junctions according to the number of their adjacent junctions—that is, the number of junctions to which they are connected and, optionally, to particular attributes on their adjacent edges. This tool allows you to configure the Reduce Junction rule to run by network categories. This means that you can configure the reduction of junctions in the generated diagrams depending on whether they are tagged with specific network categories.

  Learn more about reductions in diagrams

Parameters

Dialog

Label	Explanation	Data Type
Input Network	The utility network containing the diagram template that will be modified.	Utility Network
Input Diagram Template	The name of the diagram template that will be modified.	String
Active	Specifies whether the rule will be active when generating and updating diagrams based on the specified template. Checked—The added rule will become active during the generation and update of any diagrams based on the input template. This is the default. Unchecked—The added rule will not become active during the generation or update of any diagrams based on the input template.	Boolean
Rule Process	Specifies how the junctions that are tagged with the specified network categories will be reduced. Exclude categories—Junctions that are tagged with the specified network categories will not be reduced, while other junctions will be reduced. This is the default. Include categories—Junctions that are tagged with the specified network categories will be reduced.	String
Categories	The network categories that will be excluded or included depending on the Rule Process parameter value. If the Rule Process parameter is set to Include categories, one or more network categories must be specified. All junctions that are tagged with the specified categories will be reduced in the generated diagrams. If the Rule Process parameter is set to Exclude categories, the junctions that are tagged with the specified categories will not be reduced in the generated diagrams, while junctions that are not tagged with the specified categories will be reduced.	String
Reduce Junctions With (Optional)	Specifies the number of junction connections that will be considered for reduction. Maximum two connected junctions—Junctions with two or fewer connections will be considered. In this case, a specific process will be run according to the number of candidate junction connections that will be reduced. This is the default. Minimum three connected junctions—Junctions with three or more connections will be considered. In this case, upstream traces will be run to determine whether candidate junction connections will be reduced.	String
Reduce if unconnected (Optional)	Specifies whether each unconnected network diagram junction candidate will be reduced. This parameter is only active when Reduce Junctions With is set to Maximum two connected junctions. Checked—Unconnected network diagram junction candidates will be reduced. Each junction will be removed. Unchecked—Unconnected network diagram junction candidates will not be reduced; they will be kept. This is the default.	Boolean
Reduce if connected to a single junction (Optional)	Specifies whether each network diagram junction reduction candidate that is connected to a single junction will be reduced. This parameter is only active when Reduce Junctions With is set to Maximum two connected junctions. Checked—Network diagram junction reduction candidates that are connected to a single junction will be reduced. Each junction and its incident edge will be reduced onto its single connected junction. Unchecked—Network diagram junction reduction candidates that are connected to a single junction will not be reduced; they will be kept. This is the default.	Boolean
Reduce if connected to 2 different junctions (Optional)	Specifies whether each network diagram junction reduction candidate that is connected to two other junctions will be reduced. This parameter is only active when Reduce Junctions With is set to Maximum two connected junctions. Checked—Network diagram junction reduction candidates that connect two other junctions will be reduced. Each junction and its incident edges will be reduced onto a super span edge (the reduction edge). This is the default. Unchecked—Network diagram junction reduction candidates that connect two other junctions will not be reduced; they will be kept.	Boolean
Edge Attribute Names (Optional)	The alias of the edge attributes adjacent to the junction reduction candidate. The junction will be reduced only when all of its adjacent edges have the same values for each specified attribute alias.	String
Description (Optional)	The description of the rule.	String

Derived Output

Label	Explanation	Data Type
Output Network	The updated utility network.	Utility Network
Output Diagram Template	The name of the diagram template.	String

Python

arcpy.nd.AddReduceJunctionByCategoryRule(in_utility_network, template_name, is_active, inverse_category_selection, category, {connectivity_options}, {unconnected_junctions}, {one_connected_junction}, {two_connected_junctions}, {edges_attributes}, {description})

Name	Explanation	Data Type
in_utility_network	The utility network containing the diagram template that will be modified.	Utility Network
template_name	The name of the diagram template that will be modified.	String
is_active	Specifies whether the rule will be enabled when generating and updating diagrams based on the specified template. ACTIVE—The added rule will become enabled during the generation and update of any diagrams based on the input template. This is the default. INACTIVE—The added rule will not become enabled during the generation or update of any diagrams based on the input template.	Boolean
inverse_category_selection	Specifies how the junctions that are tagged with the specified network categories will be reduced. EXCLUDE_CATEGORIES—Junctions that are tagged with the specified network categories will not be reduced, while other junctions will be reduced. This is the default. INCLUDE_CATEGORIES—Junctions that are tagged with the specified network categories will be reduced.	String
category [category,...]	The network categories that will be excluded or included depending on the inverse_category_selection parameter value. If the inverse_category_selection parameter is set to INCLUDE_CATEGORIES, one or more network categories must be specified. All junctions that are tagged with the specified categories will be reduced in the generated diagrams. If the inverse_category_selection parameter is set to EXCLUDE_CATEGORIES, the junctions that are tagged with the specified categories will not be reduced in the generated diagrams, while junctions that are not tagged with the specified categories will be reduced.	String
connectivity_options (Optional)	Specifies the number of junction connections that will be considered for reduction. MAX_2_CONNECTED_JUNCTIONS—Junctions with two or fewer connections will be considered. In this case, a specific process will be run according to the number of candidate junction connections that will be reduced. This is the default. MIN_3_CONNECTED_JUNCTIONS—Junctions with three or more connections will be considered. In this case, upstream traces will be run to determine whether candidate junction connections will be reduced.	String
unconnected_junctions (Optional)	Specifies whether each unconnected network diagram junction candidate will be reduced. This parameter is only enabled when connectivity_options = "MAX_2_CONNECTED_JUNCTIONS". REDUCE_UNCONNECTED_JCT—Unconnected network diagram junction candidates will be reduced. Each junction will be removed. KEEP_UNCONNECTED_JCT—Unconnected network diagram junction candidates will not be reduced; they will be kept. This is the default.	Boolean
one_connected_junction (Optional)	Specifies whether each network diagram junction reduction candidate that is connected to a single junction will be reduced. This parameter is only enabled when connectivity_options = "MAX_2_CONNECTED_JUNCTIONS". REDUCE_JCT_TO_1JCT—Network diagram junction reduction candidates that are connected to a single junction will be reduced. Each junction and its incident edge will be reduced onto its single connected junction. KEEP_JCT_TO_1JCT—Network diagram junction reduction candidates that are connected to a single junction will not be reduced; they will be kept. This is the default.	Boolean
two_connected_junctions (Optional)	Specifies whether each network diagram junction reduction candidate that is connected to two other junctions will be reduced. This parameter is only enabled when connectivity_options = "MAX_2_CONNECTED_JUNCTIONS". REDUCE_JCT_TO_2JCTS—Network diagram junction reduction candidates that connect two other junctions will be reduced. Each junction and its incident edges will be reduced onto a super span edge (the reduction edge). This is the default. KEEP_JCT_TO_2JCTS—Network diagram junction reduction candidates that connect two other junctions will not be reduced; they will be kept.	Boolean
edges_attributes [edges_attributes,...] (Optional)	The alias of the edge attributes adjacent to the junction reduction candidate. The junction will be reduced only when all of its adjacent edges have the same values for each specified attribute alias.	String
description (Optional)	The description of the rule.	String

Derived Output

Name	Explanation	Data Type
out_utility_network	The updated utility network.	Utility Network
out_template_name	The name of the diagram template.	String

Code sample

AddReduceJunctionByCategoryRule example (Python window)

Add a Reduce Junction rule to the MyTemplate1 template that exists for a given network to systematically reduce any junctions that are not tagged as Subnetwork Controller or Switch network categories regardless of their connectivity options.

import arcpy

input_Network = 'D:/MyProjectLocation/MyDatabaseConnection.sde/MyDatabase.MAP.Electric/MyDatabase.MAP.Electric'
input_DiagramTemplate = 'MyTemplate1'
input_Category1 = 'Subnetwork Controller'
input_Category2 = 'Switch'

arcpy.nd.AddReduceJunctionRule(
    input_Network, input_DiagramTemplate, 'ACTIVE', 'EXCLUDE_CATEGORIES',
    [input_Category1, input_Category2], 'MAX_2_CONNECTED_JUNCTIONS',
    'REDUCE_UNCONNECTED_JCT', 'REDUCED_JCT_TO_1JCT', 'REDUCE_JCT_TO_2JCTS')

Environments

This tool does not use any geoprocessing environments.

Licensing information

• Basic: No
• Standard: Yes
• Advanced: Yes