Visualize Space Time Cube in 2D (Space Time Pattern Mining)

Summary

Visualizes the variables stored in a netCDF space-time cube and the results generated by the Space Time Pattern Mining tools. Output from this tool is a two-dimensional representation uniquely rendered based on the variable and theme specified.

Illustration

Visualize Space Time Cube in 2D tool illustration

Usage

  • This tool accepts netCDF files created by various tools in the Space Time Pattern Mining toolbox.

    Learn more about creating a space-time cube

  • The Locations with data option in the Display Theme parameter allows you to see all locations that contain data for the chosen variable, and the Trends option shows where values have been increasing or decreasing over time (the results of the Mann-Kendall statistic run on the specified Cube Variable value for each location). The Locations with data and Trends options are always available after the cube is created.

  • The Hot and cold spot trends option shows where hot and cold spot z-scores are increasing or decreasing over time (the results of the Mann-Kendall statistic run on the z-scores of the space-time hot spot analysis for the specified Cube Variable value), and the Emerging Hot Spot Analysis results option re-creates the results returned when you ran the Emerging Hot Spot Analysis tool. Both Hot and cold spot trends and Emerging Hot Spot Analysis results are only available when Emerging Hot Spot Analysis has been run on the specified Cube Variable value.

  • The Time Series Clustering results option re-creates the results returned when you initially ran the Time Series Clustering tool.

  • The Percentage of local outliers, Local outlier in most recent time period, Local Outlier Analysis results, and Locations without spatial neighbors options are only available when the Local Outlier Analysis tool has been run first. Percentage of local outliers shows the proportion of total outliers at each location and Local outlier in most recent time period shows all of the outliers that occurred in the most recent time step of the space-time cube. Local Outlier Analysis results re-creates the results returned when you initially ran the Local Outlier Analysis tool. Locations without spatial neighbors displays all locations that have no spatial neighbors within the Neighborhood Distance value that was specified when you ran Local Outlier Analysis. As a result, these locations rely only on temporal neighbors for analysis calculations.

  • The Number of estimated bins option shows the number of bins that were estimated at each unique location, allowing you to see if there is a spatial pattern of places with missing values. If entire sections of the map have high numbers of estimated bins, that area may be best left out of the analysis. The Locations excluded from analysis option shows those places that had data but had empty bins that could not be filled because they did not meet the criteria for estimation. Both Number of estimated bins and Locations excluded from analysis are only available for Summary Fields values.

  • Using the Forecast results option in the Display Theme parameter, you can re-create the results from when you originally ran a tool in the Time Series Forecasting toolset. This option will not be available if the input space-time cube was created using the Subset Space Time Cube tool on a forecast space-time cube.

  • The Time series outlier results option in the Display Theme parameter indicates locations containing bins that were considered temporal outliers for the selected Cube Variable parameter value and the analysis that is run.

  • The Time series change points option in the Display Theme parameter displays the results of change point detection. The output features display the number of change points at each location, along with pop-up charts that display the original time series, change points, and estimates of the mean or standard deviation of each segment.

  • The Time series cross correlation results option in the Display Theme parameter displays the results of time series cross correlation. The output creates a group layer summarizing the cross correlations of each location for all time lags.

  • For in-depth information about each of the Display Theme parameter options, including descriptions of the output and charts, see the Visualization display themes for the space-time cube topic.

Parameters

LabelExplanationData Type
Input Space Time Cube

The space-time cube containing the variable to be analyzed. Space-time cubes have a .nc file extension and are created using various tools in the Space Time Pattern Mining toolbox.

File
Cube Variable

The numeric variable in the netCDF cube that will be explored. The space-time cube will always contain the COUNT variable. Any Summary Fields or Variables values will also be available if they were included when the cube was created.

String
Display Theme

Specifies the characteristic of the Cube Variable value that will be displayed. Available options depend on how the cube was created and the analyses that were run.

For in-depth information about each option, including descriptions of the output and created charts, see the Visualization display themes for the space-time cube topic.

  • Locations with dataAll locations that contain data for the cube variable parameter will be displayed.
  • TrendsThe trend of values at each location that were determined using the Mann-Kendall statistic will be displayed.
  • Hot and cold spot trendsThe trend of z-scores at each location that were determined using the Mann-Kendall statistic will be displayed.
  • Emerging Hot Spot Analysis resultsThe results of the Emerging Hot Spot Analysis tool will be displayed.
  • Local Outlier Analysis resultsThe results of the Local Outlier Analysis tool will be displayed.
  • Percentage of local outliersThe total percentage of outliers at each location will be displayed.
  • Local outlier in the most recent time periodThe outliers occurring in the most recent time period will be displayed.
  • Time Series Clustering resultsThe results of the Time Series Clustering tool will be displayed.
  • Locations without spatial neighborsLocations that have no spatial neighbors for the last analysis run will be displayed. These locations rely only on temporal neighbors for analysis.
  • Number of estimated binsThe number of bins that were estimated for each location will be displayed.
  • Locations excluded from analysisThe locations that were excluded from analysis because they had empty bins that did not meet the criteria for estimation will be displayed.
  • Forecast resultsThe results of a tool in the Time Series Forecasting toolset will be displayed.
  • Time series outlier resultsThe results of the outlier option parameter in the Time Series Forecasting tools will be displayed.
  • Time series change pointsThe results of the Change Point Detection tool will be displayed.
  • Time Series Cross Correlation resultsThe results of the Time Series Cross Correlation tool will be displayed.
String
Output Features

The output feature class results. This feature class will be a two-dimensional map representation of the specified display variable.

Feature Class
Enable Time Series Pop-ups

Specifies whether time series pop-ups will be generated for each output feature. Pop-up charts are not supported for shapefile outputs.

  • Checked—Time series pop-ups will be generated for each feature in the dataset.
  • Unchecked—Time series pop-ups will not be generated. This is the default.
Boolean

arcpy.stpm.VisualizeSpaceTimeCube2D(in_cube, cube_variable, display_theme, output_features, enable_time_series_popups)
NameExplanationData Type
in_cube

The space-time cube containing the variable to be analyzed. Space-time cubes have a .nc file extension and are created using various tools in the Space Time Pattern Mining toolbox.

File
cube_variable

The numeric variable in the netCDF cube that will be explored. The space-time cube will always contain the COUNT variable. Any Summary Fields or Variables values will also be available if they were included when the cube was created.

String
display_theme

Specifies the characteristic of the Cube Variable value that will be displayed. Available options depend on how the cube was created and the analyses that were run.

For in-depth information about each option, including descriptions of the output and created charts, see the Visualization display themes for the space-time cube topic.

  • LOCATIONS_WITH_DATAAll locations that contain data for the cube variable parameter will be displayed.
  • TRENDSThe trend of values at each location that were determined using the Mann-Kendall statistic will be displayed.
  • HOT_AND_COLD_SPOT_TRENDSThe trend of z-scores at each location that were determined using the Mann-Kendall statistic will be displayed.
  • EMERGING_HOT_SPOT_ANALYSIS_RESULTSThe results of the Emerging Hot Spot Analysis tool will be displayed.
  • LOCAL_OUTLIER_ANALYSIS_RESULTSThe results of the Local Outlier Analysis tool will be displayed.
  • PERCENTAGE_OF_LOCAL_OUTLIERSThe total percentage of outliers at each location will be displayed.
  • LOCAL_OUTLIER_IN_MOST_RECENT_TIME_PERIODThe outliers occurring in the most recent time period will be displayed.
  • TIME_SERIES_CLUSTERING_RESULTSThe results of the Time Series Clustering tool will be displayed.
  • LOCATIONS_WITHOUT_SPATIAL_NEIGHBORSLocations that have no spatial neighbors for the last analysis run will be displayed. These locations rely only on temporal neighbors for analysis.
  • NUMBER_OF_ESTIMATED_BINSThe number of bins that were estimated for each location will be displayed.
  • LOCATIONS_EXCLUDED_FROM_ANALYSISThe locations that were excluded from analysis because they had empty bins that did not meet the criteria for estimation will be displayed.
  • FORECAST_RESULTSThe results of a tool in the Time Series Forecasting toolset will be displayed.
  • TIME_SERIES_OUTLIER_RESULTSThe results of the outlier option parameter in the Time Series Forecasting tools will be displayed.
  • TIME_SERIES_CHANGE_POINTSThe results of the Change Point Detection tool will be displayed.
  • TIME_SERIES_CROSS_CORRELATION_RESULTSThe results of the Time Series Cross Correlation tool will be displayed.
String
output_features

The output feature class results. This feature class will be a two-dimensional map representation of the specified display variable.

Feature Class
enable_time_series_popups

Specifies whether time series pop-ups will be generated for each output feature. Pop-up charts are not supported for shapefile outputs.

  • CREATE_POPUPTime series pop-ups will be generated for each feature in the dataset.
  • NO_POPUPTime series pop-ups will not be generated. This is the default.
Boolean

Code sample

VisualizeSpaceTimeCube2D example 1 (Python window)

The following Python window script demonstrates how to use the VisualizeSpaceTimeCube2D function.

import arcpy
arcpy.env.workspace = r"C:\STPM"
arcpy.stpm.VisualizeSpaceTimeCube2D_stpm("Homicides.nc", "AGE_STD_ZEROS", 
                                    "LOCATIONS_EXCLUDED_FROM_ANALYSIS", 
                                    "Homicides_Age_LocExc.shp")
VisualizeSpaceTimeCube2D example 2 (stand-alone script)

The following stand-alone Python script demonstrates how to use the VisualizeSpaceTimeCube2D function.

# Display Space Time Cube of homicide incidents in a metropolitan area

# Import system modules
import arcpy

# Set environment property to overwrite existing output, by default
arcpy.env.overwriteOutput = True

# Local variables...
workspace = r"C:\STPM"

# Set the current workspace (to avoid having to specify the full path to the 
# feature classes each time)
arcpy.env.workspace = workspace

# Display Space Time Cube of homicide with the standard deviation of victim's 
# age, fill no-data as 0
# Only display the locations excluded from analysis.
# Process: Visualize Space Time Cube in 2D 
cube = arcpy.stpm.VisualizeSpaceTimeCube2D("Homicides.nc", "AGE_STD_ZEROS", 
                                           "LOCATIONS_EXCLUDED_FROM_ANALYSIS", 
                                           "Homicides_Age_LocExc.shp")

Licensing information

  • Basic: Yes
  • Standard: Yes
  • Advanced: Yes

Related topics