Create ISO 19115-1 and ISO 19115-3 metadata

The metadata content standard ISO 19115-1, Geographic information - Metadata - Part 1: Fundamentals, and the implementation specification ISO 19115-3, Geographic information - Metadata - Part 3: XML schema implementation for fundamental concepts, are standards finalized in recent years. They replace the original ISO 19115 metadata standard, Geographic information — Metadata and the implementation specification portion of ISO 19139, Geographic information — Metadata — XML schema implementation.

This guide describes the workflows for editing metadata in ArcGIS Pro to produce content that complies with the ISO 19115-1 and ISO 19115-3 metadata standards.

Configure ArcGIS Pro

The first step toward creating metadata content that complies with the ISO 19115-1 and ISO 19115-3 metadata standards is to configure ArcGIS Pro correctly. On the Options dialog box, choose ISO 19115-3 XML Schema Implementation in the Metadata style drop-down list.

When you edit metadata in the metadata view, the validation rules you see are based on the ISO 19115-1 and ISO 19115-3 metadata standards. When you view an item's metadata in the catalog view, all of its metadata content is displayed.

If the metadata style set in ArcGIS Pro doesn't match the metadata style used by your organization and by ArcGIS Desktop, you may see inconsistencies when you view and edit metadata throughout the ArcGIS platform.

Edit ISO metadata content

You cannot create complete ISO 19115-1 metadata in the current version of ArcGIS Pro. The ArcGIS metadata editor will be modified in a future release to include additional content defined in ISO 19115-1. However, you can author most ISO 19115-1 content and generate a fully-compliant ISO 19115-3 format metadata XML file that describes an item. To get started, complete the following steps:

  1. Edit an item's metadata in the metadata view.
    The metadata view appears, displaying the first metadata editor page. All pages available for editing metadata are listed in the Contents pane.
  2. Click each page in the Contents pane where required content is identified as being missing Invalid Metadata and provide the appropriate content.

    When all required content has been provided the page will be identified in the Contents pane as being valid Valid Metadata.

  3. Apply or save your changes as appropriate.

    It may take some time to complete an item's metadata. You can save your changes and finish the remainder at a later time, even if required information is missing. The next time you work on the project, the metadata view will be open to the page you worked on last.

  4. Close the metadata view when your work is complete.

Create ISO-compliant metadata

The following table describes where you can find each of the minimum mandatory ISO 19115-1 and ISO 19115-3 metadata elements. You're not limited to the information below; this information is provided to help you get started. If information beyond the minimum is provided, additional content may be required to complement that information according to the standards.

Metadata elements are identified by entity and element names defined in the ISO 19115-1 Geographic information - Metadata - Part 1: Fundamentals UML diagrams and data dictionary tables.

Metadata editor pageSteps to fulfill ISO 19115-1 and 19115-3 requirements
Overview > Item Description
  • MD_DataIdentification.citation.CI_Citation.title—Type the title in the Title text box.
  • MD_DataIdentification.abstract—Type the abstract in the Description (Abstract) text box.
  • MD_DataIdentification.extent.EX_Extent.geographicElement—If the item is not a dataset, you must provide either a bounding box (EX_GeographicBoundingBox) or a place identifier (EX_GeographicDescription) for the data. If a bounding box hasn't been provided automatically for the item but an extent can be provided, click New Bounding Box and provide the bounding coordinates in the appropriate text boxes.
Overview > Topics & Keywords
  • MD_DataIdentification.topicCategory—If the scope of the item's metadata is dataset or series, check as many Topic Category values as appropriate.
Overview > Citation
  • MD_DataIdentification.citation.CI_Citation.title—The title provided on the Item Description page also appears here in the Title text box.
Metadata > Details
  • MD_Metadata.defaultLocale.PT_Locale.language—Click the Language drop-down list and click an appropriate value if one hasn't already been provided. ArcGIS metadata is always encoded in UTF-8 format, which accommodates many languages; therefore, the language used must be identified.
  • MD_Metadata.metadataScope.MD_MetadataScope.resourceScope—If the item you are describing is not a dataset, click the Hierarchy Level drop-down list and click an appropriate value.
  • MD_Metadata.metadataScope.MD_MetadataScope.name—If the item's scope was changed to something other than dataset, describe the scope of this metadata document in the Hierarchy Level Name text box.
  • MD_Metadata.parentMetadata—If this item has a parent item that should be identified, type the appropriate information in the Parent Identifier text box. It isn't possible at this time to provide a title as well as an identifier for the parent item.
Metadata > Contacts
  • MD_Metadata.contact—Click New Contact if an appropriate contact isn't listed in the drop-down list. Type a name in the Name, Organization, or Position text box. Click an appropriate value in the Role drop-down list.
Resource > Details
  • MD_DataIdentification.defaultLocale.PT_Locale.language—If the item includes textual information and a language hasn't already been provided, click the Language drop-down list and click an appropriate value.
  • MD_DataIdentification.defaultLocale.PT_Locale.characterEncoding—If the item is not encoded in UTF-8 format, click the Character Set drop-down list and click the appropriate value.
Resource > Extents
  • MD_DataIdentification.extent.EX_Extent.geographicElement—If the item is not a dataset, you must provide either a bounding box (EX_GeographicBoundingBox) or a place identifier (EX_GeographicDescription) for the data. Click New Extent, and specify the item's geographic location.
  • EX_GeographicBoundingBox—The bounding box provided on the Item Description page also appears here under the Extents heading.
  • EX_GeographicDescription—Click New Geographic Description and type a place identifier in the Code text box. Check Description contains the resource. To identify the registry that defines the place identifier, click New Authority Citation and type its name in the Title text box.

Best practices for authoring ISO content in ArcGIS

You cannot create complete ISO 19115-1 metadata in the current version of ArcGIS Pro. However, you can author most ISO 19115-1 content and generate a fully-compliant ISO 19115-3 format metadata XML file that describes an item. There are a few differences between the instructions in ISO 19115-1 and ISO 19115-3 and how you should provide the corresponding information in ArcGIS. By following some best practices, the metadata you create in ArcGIS will be accurate and easier to maintain and will transition seamlessly to other metadata styles and formats in the future.

Inapplicable or unknown values

When a metadata element's value is unknown or inapplicable, leave its value blank when you edit metadata in ArcGIS. If a mandatory metadata element is left blank in ArcGIS and metadata is exported to an ISO 19115-3-formatted XML file, a nilReason code is added automatically in a manner that satisfies the ISO 19115-3 XML schemas to indicate that the value is missing or unknown. Other metadata standards have similar requirements, but different elements are considered mandatory and the manner in which the uncertainty or absence of a value is indicated in the exported XML file is different. Exporters for each style handle the situation in an appropriate manner.

Content defined by the metadata style

A metadata style configures ArcGIS to support a specific metadata standard or profile. Each metadata standard typically has metadata elements to record the name and version of the standard that was followed, how the metadata content was recorded, and so on. Exporters for each style handle the situation in an appropriate manner. When metadata is exported to an ISO 19115-3-formatted XML file, elements defining the metadataStandard are added at that time.

Content that can't or shouldn't be edited

For most items, ArcGIS automatically records the item's intrinsic properties in its metadata as appropriate. For example, if an item's spatial reference is set, full details of that spatial reference are recorded in its metadata. Detailed spatial reference properties can't be edited manually in the metadata view. This ensures the metadata reflects the item's actual spatial reference. With other metadata styles, you can manually provide information about an item's spatial reference for items that don't support synchronization, but you can only do so by providing the spatial reference identifier. The properties of the spatial reference are fixed for that identifier, and they can be examined in the appropriate registry where they're defined; individual spatial reference parameters are not manually typed into an item's metadata.

For other properties, such as an item's feature count, raster size, or attribute labels, it's possible to change the information derived from the item when editing metadata in ArcGIS. However, these values should be left unaltered. As long as these values aren't edited in the metadata view, ArcGIS will continue to update them as the item's properties change and they'll remain accurate. For example, if attributes are provided in an item's metadata but their names don't match field names in the item's attribute table, they'll be removed from the item's metadata the next time it's synchronized with the item's intrinsic properties.

The ArcGIS metadata editor automatically provides the current date as the date when the metadata was last updated, and the appropriate character set value describing how metadata created by ArcGIS is encoded. These values typically should not be modified. However, if you're transcribing metadata that describes an archived item, for example, you may want to change the metadata date to reflect the date when the metadata content was originally authored.

Export metadata to the ISO 19115-3 XML format

If you need to provide information about an item to people or organizations outside the ArcGIS platform, you can export the item's metadata to a stand-alone metadata file in the ISO 19115-3 XML format. When ArcGIS Pro is set to use the ISO 19115-3 XML Schema Implementation style, the item's metadata will be exported by default to the ISO 19115-3 XML format; it will appear in the drop-down list as Current style (ISO19115_3). If you're using another metadata style, you can still choose to export your metadata in this format by selecting the ISO 19115-3 option in the drop-down list.

  1. On the Catalog tab on the ribbon, in the Metadata group, click Export Export.

    The Export Metadata dialog box appears.

  2. Click The metadata content to export drop-down list and click the amount of content to filter out of the item's metadata during the export process.
    • All Supported Content—The item's metadata is not filtered.
    • Without Machine Names—The item's metadata content is filtered to remove any machine names that may exist. Appropriate actions are taken depending on the context in which the machine name is found. The metadata element will be removed if it doesn't cause the document to be invalid, the machine name will be removed from the beginning of a UNC path, or the value will be changed to identify the location as being withheld.
    • Without Sensitive Information—Machine names are filtered as described above. Additionally, local and network file paths, and internet locations other than http or https addresses are removed in the same manner. Operating system information, database information, and geoprocessing history are also removed.
  3. If the ISO 19115-3 format is not already selected, click The type of metadata to export drop-down list and click ISO 19115-3.
  4. Browse to or type the location and name of the XML file that will be created in the Export metadata to text box.
  5. Click OK.

    The filtered ArcGIS metadata elements are matched to the appropriate ISO 19115-3 metadata elements, and their content is transferred to an ISO 19115-3-format XML file. ArcGIS metadata includes content that is not included in the ISO 19115-3 standard, such as thumbnails; this content can't be included in an ISO 19115-3-format XML file.

Note:

While it is possible to include information about the fields in an attribute table in an ISO 19115-3 metadata XML file, the exporter does not include this information in the exported file at this time. This information will be included in the exported XML file in a future release of ArcGIS Pro.

Related topics