Aggregate (Spatial Analyst)

Available with Spatial Analyst license.

Summary

Generates a reduced-resolution version of a raster. Each output cell contains the Sum, Minimum, Maximum, Mean, or Median of the input cells that are encompassed by the extent of that cell.

Learn more about how Aggregate works

Illustration

Aggregate illustration
OutRas = Aggregate(InRas1, 3, Max, Expand, Data)

Usage

  • For the Aggregation technique settings of Maximum, Minimum, or Sum, the output raster type will be the same as that of the input raster. If the technique is Mean or Median, the output type will always be float.

  • The geoprocessing analysis environments Extent and Cell size are recognized by this tool. To determine the output raster's resolution when an integer cell size has been specified, multiply the cell resolution of the analysis environment by the input cell factor parameter. If the cell size for the analysis environment is set to the minimum or maximum of the inputs, the resolution of the output raster will be the product of the input raster's resolution multiplied by the specified cell factor.

  • See Analysis environments and Spatial Analyst for additional details on the geoprocessing environments that apply to this tool.

Parameters

LabelExplanationData Type
Input raster

The input raster to aggregate.

It can be of integer or floating point type.

Raster Layer
Cell factor

The factor by which to multiply the cell size of the input raster to obtain the desired resolution for the output raster.

For example, a cell factor value of three would result in an output cell size three times larger than that of the input raster.

The value must be an integer greater than 1.

Long
Aggregation technique
(Optional)

Establishes how the value for each output cell will be determined.

The values of the input cells encompassed by the coarser output cell are aggregated by one of the following statistics:

  • SumThe sum (total) of the input cell values. This is the default.
  • MaximumThe largest value of the input cells.
  • MeanThe average value of the input cells.
  • MedianThe median value of the input cells.
  • MinimumThe smallest value of the input cells.
String
Expand extent if needed
(Optional)

Defines how to handle the boundaries of the input raster when its rows or columns are not a multiple of the cell factor.

  • Checked—Expands the top or right boundaries of the input raster so the total number of cells in a row or column is a multiple of the cell factor. Those expanded cells are given a value of NoData when put into the calculation.

    With this option, the output raster can cover a larger spatial extent than the input raster.

    This is the default.

  • Unchecked—Reduces the number of rows or columns in the output raster. This will truncate the remaining cells on the top or right boundaries of the input raster, making the number of rows or columns in the input raster a multiple of the cell factor.

    With this option, the output raster can cover a smaller spatial extent than the input raster.

If the number of rows and columns in the input raster is a multiple of the Cell factor, these keywords are not used.

Boolean
Ignore NoData in calculations
(Optional)

Denotes whether NoData values are ignored by the aggregation calculation.

  • Checked—Specifies that if NoData values exist for any of the cells that fall within the spatial extent of a larger cell on the output raster, the NoData values will be ignored when determining the value for output cell locations. Only input cells within the extent of the output cell that have data values will be used in determining the value of the output cell.

    This is the default.

  • Unchecked—Specifies that if any cell that falls within the spatial extent of a larger cell on the output raster has a value of NoData, the value for that output cell location will be NoData.

    When Unchecked is used, it is implied that when cells within an aggregation contain the NoData value, there is insufficient information to perform the specified calculations necessary to determine an output value.

Boolean

Return Value

LabelExplanationData Type
Output raster

The output aggregated raster.

It is a reduced-resolution version of the input raster.

Raster

Aggregate(in_raster, cell_factor, {aggregation_type}, {extent_handling}, {ignore_nodata})
NameExplanationData Type
in_raster

The input raster to aggregate.

It can be of integer or floating point type.

Raster Layer
cell_factor

The factor by which to multiply the cell size of the input raster to obtain the desired resolution for the output raster.

For example, a cell factor value of three would result in an output cell size three times larger than that of the input raster.

The value must be an integer greater than 1.

Long
aggregation_type
(Optional)

Establishes how the value for each output cell will be determined.

The values of the input cells encompassed by the coarser output cell are aggregated by one of the following statistics:

  • SUMThe sum (total) of the input cell values. This is the default.
  • MAXIMUMThe largest value of the input cells.
  • MEANThe average value of the input cells.
  • MEDIANThe median value of the input cells.
  • MINIMUMThe smallest value of the input cells.
String
extent_handling
(Optional)

Defines how to handle the boundaries of the input raster when its rows or columns are not a multiple of the cell factor.

  • EXPANDExpands the top or right boundaries of the input raster so the total number of cells in a row or column is a multiple of the cell factor. Those expanded cells are given a value of NoData.With this option, the output raster can cover a larger spatial extent than the input raster. This is the default.
  • TRUNCATEReduces the number of rows or columns in the output raster by 1. This will truncate the remaining cells on the top or right boundaries of the input raster, making the number of rows or columns in the input raster a multiple of the cell factor.With this option, the output raster can cover a smaller spatial extent than the input raster.

If the number of rows and columns in the input raster is a multiple of the cell_factor, these keywords are not used.

Boolean
ignore_nodata
(Optional)

Denotes whether NoData values are ignored by the aggregation calculation.

  • DATASpecifies that if NoData values exist for any of the cells that fall within the spatial extent of a larger cell on the output raster, the NoData values will be ignored when determining the value for output cell locations. Only input cells within the extent of the output cell that have data values will be used in determining the value of the output cell.This is the default.
  • NODATASpecifies that if any cell that falls within the spatial extent of a larger cell on the output raster has a value of NoData, the value for that output cell location will be NoData.When the this option is used, it is implied that when cells within an aggregation contain the NoData value, there is insufficient information to perform the specified calculations necessary to determine an output value.
Boolean

Return Value

NameExplanationData Type
out_raster

The output aggregated raster.

It is a reduced-resolution version of the input raster.

Raster

Code sample

Aggregate example 1 (Python window)

This example aggregates a raster by averaging the values with a cell factor of 3 and outputs a TIFF raster.

import arcpy
from arcpy import env
from arcpy.sa import *
env.workspace = "C:/sapyexamples/data"
outAggreg = Aggregate("highres", 3, "MAXIMUM", "TRUNCATE", "DATA")
outAggreg.save("C:/sapyexamples/output/aggregate.tif")
Aggregate example 2 (stand-alone script)

This example aggregates a raster by averaging the values with a cell factor of 3 and outputs a Grid raster.

# Name: Aggregate_Ex_02.py
# Description: Generates a reduced resolution version of a raster.
# Requirements: Spatial Analyst Extension

# Import system modules
import arcpy
from arcpy import env
from arcpy.sa import *

# Set environment settings
env.workspace = "C:/sapyexamples/data"

# Set local variables
inRaster = "highres"
cellFactor = 3

# Execute Aggregate
outAggreg = Aggregate(inRaster, cellFactor, "MEAN", "TRUNCATE", "NODATA")

# Save the output 
outAggreg.save("C:/sapyexamples/output/aggregate02")

Licensing information

  • Basic: Requires Spatial Analyst
  • Standard: Requires Spatial Analyst
  • Advanced: Requires Spatial Analyst

Related topics