Spatial Analyst toolbox history

The tables below catalog changes made to every tool in the toolbox. There is one table per tool and you can click the tool name to go to the tool reference page.

For more information about how to interpret and use these tables, see Toolbox history topics.

Abs

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

ACos

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

ACosH

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Add Surface Information

Version	Description
3.1	Parameter in_surface has new data type: Image Service
2.7	Existing 3D Analyst tool now available to Spatial Analyst at this release

Aggregate

Version	Description
2.5	Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool. The median option of the aggregation_type parameter will now always produce an output raster of type float.
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Aggregate Multidimensional Raster

Version	Description
2.8	3 new parameters added: percentile_interpolation_type dimensionless percentile_value Parameter aggregation_method had new option added: PERCENTILE
2.6	New environment added: pyramid
2.5	Parameter in_multidimensional_raster has 3 new data types: Mosaic Dataset Image Service Raster Dataset Parameter interval_keyword has 6 new options: RECURRING_MONTHLY PENTADLY DEKADLY RECURRING_WEEKLY RECURRING_QUARTERLY RECURRING_DAILY
2.4	New at this version

Area Solar Radiation

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

ASin

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

ASinH

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Aspect

Version	Description
3.1	New parameter added: analysis_target_device
2.6	New parameter added: project_geodesic_azimuths.
2.3	New environment added: cellSizeProjectionMethod
2.0	Two new parameters added: method z_unit The method parameter allows you choose between the traditional planar method for performing the calculations, and the new geodesic method. When using the geodesic option: A new z_unit parameter is available, which allows you to specify the linear unit of the vertical z-values if it is not already defined in the coordinate system of the input. If a suitable GPU device is available on your system, greater performance will come as a result of the calculations being GPU accelerated. The behavior for how NoData cells and boundary cells are handled was changed. At least seven of the eight cells neighboring the processing cell must have a value, otherwise the output will be NoData. Cells in the outermost rows and columns of the output raster will be NoData.
1.0	Ported from ArcMap 10.3

ATan

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

ATan2

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

ATanH

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Band Collection Statistics

Version	Description
1.0	Ported from ArcMap 10.3

Basin

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Bitwise And

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Bitwise Left Shift

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Bitwise Not

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Bitwise Or

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Bitwise Right Shift

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Bitwise XOr

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Block Statistics

Version	Description
3.0	When the neighborhood type is NbrWeight, the algorithms for the MEAN and STD statistics were improved. The MEDIAN and MINORITY options for the statistics_type parameter are no longer supported. For the MAJORITY and MINORITY statistics, when there is a tie, the lowest value is now returned.
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Boolean And

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Boolean Not

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Boolean Or

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Boolean XOr

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Boundary Clean

Version	Description
2.7	Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Calculate Kernel Density Ratio

Version	Description
3.0	New at this version

Cell Statistics

Version	Description
2.9	Two new parameters added: percentile_interpolation_type percentile_value Parameter statistics_type had new option added: PERCENTILE
2.5	New parameter added: process_as_multiband This parameter has two options: SINGLE_BAND for processing as single band and MULTI_BAND for processing as multiband. The default is SINGLE_BAND.
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Class Probability

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Classify Raster

Version	Description
2.6	Parameter in_raster has two new data types: Mosaic Dataset Raster Dataset Parameter in_additional_raster has two new data types: Mosaic Dataset Raster Dataset
2.2	Parameter in_raster has two new data types: Image Service String Parameter in_additional_raster has two new data types: Image Service String Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
1.0	New at this version

Combinatorial And

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Combinatorial Or

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Combinatorial XOr

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Combine

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Compute Confusion Matrix

Version	Description
1.1	New at this version

Compute Segment Attributes

Version	Description
2.2	Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
1.0	Ported from ArcMap 10.3

Con

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Contour

Version	Description
2.4	Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
2.3	New environment added: cellSizeProjectionMethod
2.2	Two new parameters added: contour_type max_vertices_per_feature
1.0	Ported from ArcMap 10.3

Contour List

Version	Description
2.4	Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Contour with Barriers

Version	Description
1.0	Ported from ArcMap 10.3

Corridor

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Cos

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

CosH

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Cost Allocation

Version	Description
2.3	New environment added: cellSizeProjectionMethod
2.2	There was a change in default environment behavior in which the processing extent and spatial reference now default to that of the in_cost_raster. Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
1.3	New parameter added: source_direction
1.2	Four new parameters added: source_cost_multiplier source_start_cost source_resistance_rate source_capacity
1.0	Ported from ArcMap 10.3

Cost Back Link

Version	Description
2.3	New environment added: cellSizeProjectionMethod
2.2	There was a change in default environment behavior in which the processing extent and spatial reference now default to that of the in_cost_raster. Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
1.3	New parameter added: source_direction
1.2	Four new parameters added: source_cost_multiplier source_start_cost source_resistance_rate source_capacity
1.0	Ported from ArcMap 10.3

Cost Connectivity

Version	Description
2.3	New environment added: cellSizeProjectionMethod
2.2	There was a change in default environment behavior in which the processing extent and spatial reference now default to that of the in_cost_raster.
1.2	New at this version

Cost Distance

Version	Description
2.3	New environment added: cellSizeProjectionMethod
2.2	There was a change in default environment behavior in which the processing extent and spatial reference now default to that of the in_cost_raster. Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
1.3	New parameter added: source_direction
1.2	Four new parameters added: source_cost_multiplier source_start_cost source_resistance_rate source_capacity
1.0	Ported from ArcMap 10.3

Cost Path

Version	Description
2.5	New parameter added: force_flow_direction_convention
1.0	Ported from ArcMap 10.3

Cost Path As Polyline

Version	Description
2.5	New parameter added: force_flow_direction_convention
2.1	New at this version

Create Accuracy Assessment Points

Version	Description
3.5	New parameter added: min_point_distance
2.9	New parameter added: polygon_dimension_field
1.1	New at this version

Create Constant Raster

Version	Description
2.8	Parameter extent has new data type: Envelope
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Create Normal Raster

Version	Description
2.8	Parameter extent has new data type: Envelope
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Create Random Raster

Version	Description
2.8	Parameter extent has new data type: Envelope
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Create Signatures

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Curvature

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Cut Fill

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Darcy Flow

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Darcy Velocity

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Deep Learning Model To Ecd

Version	Description
2.3	Deprecated This is a deprecated tool. This functionality has been replaced by the Export Training Data For Deep Learning tool that creates classification information for use in the deep learning model.
2.1	New at this version

Dendrogram

Version	Description
1.0	Ported from ArcMap 10.3

Derive Continuous Flow

Version	Description
3.0	New at this version

Derive Stream As Line

Version	Description
3.0	New at this version

Derive Stream As Raster

Version	Description
3.0	New at this version

Diff

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Dimensional Moving Statistics

Version	Description
2.9	New at this version

Distance Accumulation

Version	Description
3.4	For the in_cost_raster parameter, while values that are negative or zero are considered invalid, they will now be treated as small positive cost values.
3.3	Parameter vertical_factor has two new options: VFHikingTime VFBidirHikingTime
2.5	New at this version

Distance Allocation

Version	Description
3.4	For the in_cost_raster parameter, while values that are negative or zero are considered invalid, they will now be treated as small positive cost values.
3.3	Parameter vertical_factor has two new options: VFHikingTime VFBidirHikingTime
2.5	New at this version

Divide

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Edit Signatures

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Equal To

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Equal To Frequency

Version	Description
2.6	New parameter added: process_as_multiband.
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Euclidean Allocation

Version	Description
2.4	Two new parameters added: in_barrier_data out_back_direction_raster Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
2.3	New environment added: cellSizeProjectionMethod Multi-core support disabled. The parallelProcessingFactor environment no longer applies to this tool.
2.2	New parameter added: distance_method This parameter has two options: the traditional planar method for performing the calculations and a new geodesic method. The default is planar. Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
1.0	Ported from ArcMap 10.3

Euclidean Back Direction

Version	Description
2.4	New at this version

Euclidean Direction

Version	Description
2.4	Two new parameters added: in_barrier_data out_back_direction_raster Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
2.3	New environment added: cellSizeProjectionMethod Multi-core support disabled. The parallelProcessingFactor environment no longer applies to this tool.
2.2	New parameter added: distance_method This parameter has two options: the traditional planar method for performing the calculations and a new geodesic method. The default is planar. Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
1.0	Ported from ArcMap 10.3

Euclidean Distance

Version	Description
2.4	Two new parameters added: in_barrier_data out_back_direction_raster Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
2.3	New environment added: cellSizeProjectionMethod Multi-core support disabled. The parallelProcessingFactor environment no longer applies to this tool.
2.2	New parameter added: distance_method This parameter has two options: the traditional planar method for performing the calculations and a new geodesic method. The default is planar. Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
1.0	Ported from ArcMap 10.3

Exp

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Exp10

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Exp2

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Expand

Version	Description
2.4	New parameter added: expand_method. The MORPHOLOGICAL option for this parameter generates the same results as with previous releases, and is the default. With the DISTANCE method, a different algorithm is used that is distance-based, and will yield smoother results with larger settings for the number_of_cells parameter. Multi-core support is added, but only when the DISTANCE option is selected. Use the parallelProcessingFactor environment to control the number of cores used by the tool.
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Export Training Data For Deep Learning

Version	Description
3.0	Three new parameters added: in_instance_data instance_class_value_field min_polygon_overlap_ratio Parameter metadata_format had new option added: Panoptic_Segmentation New environment added: parallelProcessingFactor.
2.9	Parameter metadata_format had new option added: Imagenet
2.8	New parameter added: in_raster2 Parameter metadata_format had new option added: CycleGAN
2.7	Parameter metadata_format had two options added: MultiLabeled_Tiles Export_Tiles
2.6	Default value for parameter metadata_format changed from KTTI_rectangles to PASCAL_VOC_rectangles. Parameter reference_system had IMAGE_SPACE option removed
2.5	Four new parameters added: blacken_around_feature crop_mode reference_system processing_mode
2.4	Two new parameters added: in_mask_polygons rotation_angle Parameter metadata_format had new option added: Labeled_Tiles Parameter in_raster has new data type: Folder
2.3	Two new parameters added: buffer_radius class_value_field Parameter in_raster has four new data types: Internet Tiled Layer Map Server Layer Raster Dataset MapServer Parameter metadata_format had new option added: RCNN_Masks Parameter in_class_data has two new data types: Feature Class Raster Dataset
2.2	New parameter added: start_index
2.1	New at this version

Extract by Attributes

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Extract by Circle

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Extract by Mask

Version	Description
3.0	Two new parameters added: extraction_area analysis_extent
2.3	New environment added: cellSizeProjectionMethod
2.2	There were some changes in the default environment behavior, as follows: The tool will now use the in_raster as the default snap raster. This will improve the accuracy of the output by ensuring the correct alignment of the feature mask with the value raster. If the Mask input is a feature, the in_raster will be used for setting the cell size and the snap raster for the analysis environment. If the Mask input is a raster, the tool will compare the cell size of it to that of the in_raster, and use the one with the largest value as the cell size of the operation.
1.0	Ported from ArcMap 10.3

Extract by Points

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Extract by Polygon

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Extract by Rectangle

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Extract Multi Values to Points

Version	Description
1.2	Better handling of conditions when NoData cells are sampled. Some performance optimizations for faster execution with larger point datasets.
1.0	Ported from ArcMap 10.3

Extract Values to Points

Version	Description
1.2	Better handling of conditions when NoData cells are sampled.
1.0	Ported from ArcMap 10.3

Feature Preserving Smoothing

Version	Description
3.4	New at this version

Feature Solar Radiation

Version	Description
3.3	New parameter added: sunmap_grid_level
3.2	New at this version

Fill

Version	Description
2.3	New environment added: cellSizeProjectionMethod
2.2	Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
1.0	Ported from ArcMap 10.3

Filter

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Float

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Flow Accumulation

Version	Description
2.3	New environment added: cellSizeProjectionMethod
2.2	New parameter added: flow_direction_type This parameter allows you to specify the type of input flow direction raster (D8, MFD, or DINF). Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
2.1	Added new DOUBLE option to data_type parameter choices.
1.0	Ported from ArcMap 10.3

Flow Direction

Version	Description
2.3	New environment added: cellSizeProjectionMethod
2.2	Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
2.1	New parameter added: flow_direction_type. This parameter allows you to specifies the type of flow method to use while computing flow directions. The available options are D8, MFD, or DINF.
1.0	Ported from ArcMap 10.3

Flow Distance

Version	Description
2.3	New parameter added: statistics_type New environment added: cellSizeProjectionMethod
2.2	New parameter added: flow_direction_type This parameter allows you to specify the type of input flow direction raster (D8, MFD, or DINF). Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
2.1	New at this version

Flow Length

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Focal Flow

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Focal Statistics

Version	Description
3.0	For the NbrWeight neighborhood type, the algorithms for the MEAN and STD statistics were improved. For the MAJORITY and MINORITY statistics, when there is a tie, the lowest value is returned, unless the processing cell is one of the ties. In that case, the output will be the processing cell value.
2.4	New option for the statistics_type parameter: PERCENTILE New parameter added: percentile_value. This parameter is only supported when the statistics type is set to percentile. The median option of statistics_type now supports float rasters as input. The output from median is now always Float.
2.3	Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool. New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Fuzzy Membership

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Fuzzy Overlay

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Generate Multidimensional Anomaly

Version	Description
2.6	New parameter added: reference_mean_raster Parameter calculation_interval has new option added: EXTERNAL_RASTER New environment added: pyramid
2.5	New parameter added: calculation_interval Parameter removed: temporal_interval Parameter order changed at parameter five: Old parameter: temporal_interval New parameter: calculation_interval Parameter in_multidimensional_raster has 3 new data types: Mosaic Dataset Image Service Raster Dataset Parameter method has four new options: PERCENT_OF_MEDIAN DIFFERENCE_FROM_MEDIAN Z_SCORE PERCENT_DIFFERENCE_FROM_MEDIAN
2.4	New at this version

Generate Training Samples From Seed Points

Version	Description
2.0	New at this version

Geomorphon Landforms

Version	Description
3.1	New at this version

Geodesic Viewshed

Version	Description
3.1	New parameter added: analysis_target_device
2.8	Tool label changed from Viewshed 2 to Geodesic Viewshed.
2.3	New environment added: cellSizeProjectionMethod
1.1	New parameter added: analysis_method. This parameter allows you choose the method by which the visibility will be calculated. The option allows you to trade some accuracy for increased performance.
1.0	Ported from ArcMap 10.3

Greater Than

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Greater Than Equal

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Greater Than Frequency

Version	Description
2.6	New parameter added: process_as_multiband.
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Highest Position

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Hillshade

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

IDW

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

InList

Version	Description
2.3	New parameter added: process_as_multiband New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Inspect Training Samples

Version	Description
2.2	Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
2.0	New at this version

Interpolate Shape

Version	Description
2.7	Existing 3D Analyst tool now available to Spatial Analyst at this release

Int

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Is Null

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Iso Cluster

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Iso Cluster Unsupervised Classification

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Kernel Density

Version	Description
2.6	New parameter added: in_barriers. New environment added: parallelProcessingFactor.
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Kriging

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Least Cost Corridor

Version	Description
3.1	New at this version

Less Than

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Less Than Equal

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Less Than Frequency

Version	Description
2.6	New parameter added: process_as_multiband.
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Line Density

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Line Statistics

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Linear Spectral Unmixing

Version	Description
2.5	New at this version

Ln

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Locate Regions

Version	Description
3.2	In the output raster, cells that do not belong to any regions will now be assigned to NoData, instead of 0 as was done previously.
2.3	New environment added: cellSizeProjectionMethod
1.2	New at this version

Log10

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Log2

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Lookup

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Lowest Position

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Maximum Likelihood Classification

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Majority Filter

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Minus

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Mod

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Multiscale Surface Deviation

Version	Description
3.5	New at this version

Multiscale Surface Difference

Version	Description
3.4	New at this version

Multiscale Surface Percentile

Version	Description
3.4	New at this version

Natural Neighbor

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Negate

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Nibble

Version	Description
2.3	New environment added: cellSizeProjectionMethod
2.2	Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
2.1	Two new parameters added: nibble_nodata in_zone_raster
1.0	Ported from ArcMap 10.3

Not Equal

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Observer Points

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Optimal Corridor Connections

Version	Description
3.4	For the in_cost_raster parameter, while values that are negative or zero are considered invalid, they will now be treated as small positive cost values.
3.2	New at this version

Optimal Path As Line

Version	Description
2.7	New parameter added: create_network_paths
2.5	New at this version

Optimal Path As Raster

Version	Description
2.5	New at this version

Optimal Region Connections

Version	Description
3.4	For the inputCostRaster parameter, while values that are negative or zero are considered invalid, they will now be treated as small positive cost values.
3.3	New environment added: parallelProcessingFactor.
2.6	New parameter added: connections_within_regions
2.5	New at this version

Over

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Particle Track

Version	Description
1.0	Ported from ArcMap 10.3

Path Distance

Version	Description
2.3	New environment added: cellSizeProjectionMethod
2.2	There was a change in default environment behavior in which the processing extent and spatial reference now default to that of the in_cost_raster. Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
1.3	New parameter added: source_direction
1.2	Four new parameters added: source_cost_multiplier source_start_cost source_resistance_rate source_capacity
1.0	Ported from ArcMap 10.3

Path Distance Allocation

Version	Description
2.3	New environment added: cellSizeProjectionMethod
2.2	There was a change in default environment behavior in which the processing extent and spatial reference now default to that of the in_cost_raster. Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
1.3	New parameter added: source_direction
1.2	Four new parameters added: source_cost_multiplier source_start_cost source_resistance_rate source_capacity
1.0	Ported from ArcMap 10.3

Path Distance Back Link

Version	Description
2.3	New environment added: cellSizeProjectionMethod
2.2	There was a change in default environment behavior in which the processing extent and spatial reference now default to that of the in_cost_raster. Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
1.3	New parameter added: source_direction
1.2	Four new parameters added: source_cost_multiplier source_start_cost source_resistance_rate source_capacity
1.0	Ported from ArcMap 10.3

Pick

Version	Description
2.5	New parameter added: process_as_multiband This parameter has two options: unchecked (SINGLE_BAND in Python) for processing as single band and checked (MULTI_BAND in Python) for processing as multiband. The default is SINGLE_BAND processing.
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Plus

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Point Density

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Point Statistics

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Points Solar Radiation

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Popularity

Version	Description
2.6	New parameter added: process_as_multiband.
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Porous Puff

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Power

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Principal Components

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Rank

Version	Description
2.6	New parameter added: process_as_multiband.
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Raster Calculator

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Reclass by ASCII File

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Reclass by Table

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Reclassify

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Raster Solar Radiation

Version	Description
3.3	New parameter added: sunmap_grid_level
3.2	New at this version

Region Group

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Remove Raster Segment Tiling Artifacts

Version	Description
2.2	Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
1.4	Parameter in_segmented_raster has four new data types: Raster Dataset Mosaic Dataset String Image Service
1.2	New at this version

Rescale by Function

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Round Down

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Round Up

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Sample

Version	Description
2.6	New parameter added: generate_feature_class.
2.5	5 new parameters added: acquisition_definition statistics_type percentile_value buffer_distance layout New environment added: parallelProcessingFactor. This environment is honored only when the process_as_multidimensional parameter is set to ALL_SLICES.
1.2	Better handling of conditions when NoData cells are sampled. Some performance optimizations for faster execution with larger point datasets.
1.0	Ported from ArcMap 10.3

Segment Mean Shift

Version	Description
2.6	New parameter added: max_segment_size
2.2	Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
1.0	Ported from ArcMap 10.3

Set Null

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Shrink

Version	Description
2.4	New parameter added: shrink_method. The MORPHOLOGICAL option for this parameter generates the same results as with previous releases, and is the default. With the DISTANCE method, a different algorithm is used that is distance-based, and will yield smoother results with larger settings for the number_of_cells parameter. Multi-core support is added, but only when the DISTANCE option is selected. Use the parallelProcessingFactor environment to control the number of cores used by the tool.
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Sin

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

SinH

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Sink

Version	Description
2.3	New environment added: cellSizeProjectionMethod
2.2	Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
1.0	Ported from ArcMap 10.3

Slice

Version	Description
2.9	Two new parameters added: nodata_to_value class_interval_size Parameter slice_type has four new options: STANDARD_DEVIATION_MEAN_CENTERED GEOMETRIC_INTERVAL DEFINED_INTERVAL STANDARD_DEVIATION_MEAN_BREAK Parameter number_zones changed from Required to Optional
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Slope

Version	Description
3.1	New parameter added: analysis_target_device
2.3	New environment added: cellSizeProjectionMethod
2.0	Two new parameters added: method z_unit The method parameter allows you choose between the traditional planar method for performing the calculations, and the new geodesic method. When using the geodesic option: A new z_unit parameter is available, which allows you to specify the linear unit of the vertical z-values if it is not already defined in the coordinate system of the input. If a suitable GPU device is available on your system, greater performance will come as a result of the calculations being GPU accelerated. The behavior for how NoData cells and boundary cells are handled was changed. At least seven of the eight cells neighboring the processing cell must have a value, otherwise the output will be NoData. Cells in the outermost rows and columns of the output raster will be NoData.
1.0	Ported from ArcMap 10.3

Snap Pour Point

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Solar Radiation Graphics

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Space Time Kernel Density

Version	Description
3.4	New parameter added: out_voxel_layer
3.2	New at this version

Spline

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Spline with Barriers

Version	Description
2.0	Ported from ArcMap 10.5

Square

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Square Root

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Storage Capacity

Version	Description
2.7	New at this version

Stream Link

Version	Description
2.3	New environment added: cellSizeProjectionMethod
2.2	Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
1.0	Ported from ArcMap 10.3

Stream Order

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Stream to Feature

Version	Description
1.0	Ported from ArcMap 10.3

Surface Parameters

Version	Description
3.1	New parameter added: in_analysis_mask
2.9	Parameter parameter_type had four new options: CONTOUR_CURVATURE CONTOUR_GEODESIC_TORSION GAUSSIAN_CURVATURE CASORATI_CURVATURE
2.7	New at this version

Tabulate Area

Version	Description
2.6	New parameter added: classes_as_rows.
2.3	New environment added: cellSizeProjectionMethod
2.2	There was a change in default environment behavior for this tool. If both the inputs are raster, the cell size of the operation will be the larger of the two. If one input is a raster and the other a feature, the raster input will be used for setting the cell size and the snap raster for the analysis environment.
1.0	Ported from ArcMap 10.3

Tan

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

TanH

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Test

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Thin

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Times

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Topo to Raster

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Topo to Raster by File

Version	Description
1.0	Ported from ArcMap 10.3

Train ISO Cluster Classifier

Version	Description
2.2	Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
1.4	Environments added: Remote Processing Server Remote Processing User Name Remote Processing Password The in_raster parameter has two new data types: Image Service String The in_additional_raster parameter has two new data types: Image Service String
1.2	Two new parameters added: max_merge_per_iter—Max Number of Cluster Merges Per Iteration max_merge_distance
1.0	Ported from ArcMap 10.3

Train K-Nearest Neighbor Classifier

Version	Description
2.9	New at this version

Train Maximum Likelihood Classifier

Version	Description
2.6	New parameter added: dimension_value_field
1.4	The in_raster parameter has two new data types: Image Service String The in_additional_raster parameter has two new data types: Image Service String
1.0	Ported from ArcMap 10.3

Train Random Trees Classifier

Version	Description
2.6	New parameter added: dimension_value_field
1.4	The in_raster parameter has two new data types: Image Service String The in_additional_raster parameter has two new data types: Image Service String
1.2	New at this version

Train Support Vector Machine Classifier

Version	Description
2.6	New parameter added: dimension_value_field Default value for parameter max_samples_per_class changed from 500 to 1000
2.2	Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
1.4	The in_raster parameter has two new data types: Image Service String The in_additional_raster parameter has two new data types: Image Service String
1.3	Default value for parameter max_samples_per_class changed from 100 to 500
1.0	Ported from ArcMap 10.3

Trend

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Update Accuracy Assessment Points

Version	Description
2.9	Two new parameters added: polygon_dimension_field point_dimension_field
1.1	New at this version

Viewshed

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Visibility

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Watershed

Version	Description
2.3	New environment added: cellSizeProjectionMethod
2.2	Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
1.0	Ported from ArcMap 10.3

Weighted Overlay

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Weighted Sum

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Zonal Characterization

Version	Description
3.4	New at this version

Zonal Fill

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Zonal Geometry

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Zonal Geometry as Table

Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Zonal Histogram

Version	Description
2.6	New parameter added: zones_as_rows.
2.3	New environment added: cellSizeProjectionMethod
2.2	There was a change in the default environment behavior when the zone input is a feature. The in_value_raster is now used as the snap raster.
1.0	Ported from ArcMap 10.3

Zonal Statistics

Version	Description
3.2	Parameter statistics_type has 4 new options: MAJORITY_COUNT MINORITY_COUNT MAJORITY_PERCENT MINORITY_PERCENT
3.0	Two new parameters added: circular_calculation circular_wrap_value
2.7	New parameter added: percentile_interpolation_type
2.6	New option for the statistics_type parameter: PERCENTILE New parameter added: percentile_value. This parameter is only supported when the statistics type is set to percentile.
2.5	New parameter added: process_as_multidimensional This parameter has two options: SINGLE_SLICE (Unchecked) for processing a single slice and ALL_SLICES (Checked) for processing multiple slices. The default is SINGLE_SLICE.
2.3	New environment added: cellSizeProjectionMethod
2.2	There was a change in the default environment behavior when the zone input is a feature. The in_value_raster is now used as the snap raster.
1.0	Ported from ArcMap 10.3

Zonal Statistics as Table

Version	Description
3.2	New parameter added: out_join_layer Parameter statistics_type has 6 new options: MINORITY_VALUE_COUNT_PERCENT MINORITY_PERCENT MAJORITY_PERCENT MAJORITY_COUNT MAJORITY_VALUE_COUNT_PERCENT MINORITY_COUNT
3.0	Two new parameters added: circular_calculation circular_wrap_value
2.7	New parameter added: percentile_interpolation_type
2.6	New option for the statistics_type parameter: PERCENTILE New parameter added: percentile_values.
2.5	New parameter added: process_as_multidimensional This parameter has two options: SINGLE_SLICE (Unchecked) for processing a single slice and ALL_SLICES (Checked) for processing multiple slices. The default is SINGLE_SLICE.
2.3	New environment added: cellSizeProjectionMethod
2.2	There was a change in the default environment behavior when the zone input is a feature. The in_value_raster is now used as the snap raster.
1.0	Ported from ArcMap 10.3