Generate OIS Obstacle Data (Aviation)

Disponible con licencia de Aviation Airports.

Disponible con licencia de Aviation Charting.

Resumen

Generates a JSON string that is stored in the OBSTACLEJSON field on the input Obstruction Identification Surface (OIS) multipatch feature class that contains the data necessary to depict obstacles to safety of flight within the approach surfaces (in the form of points, lines, or polygons) in the Terrain and Obstacle Profile layout element.

For each runway feature, the tool identifies each of the approach surfaces associated with that runway. For each approach surface, the tool uses the underlying elevation models and input obstacle features to determine the highest elevations and heights of those obstacle features that intersect the approach surfaces extent. The resulting 3D points, representing the highest-point cross section of each affected obstacle, are created and stored in JSON format and saved in the corresponding approach OIS feature.

The following table shows values that are populated in the OBSTACLEJSON output message. They are given per input obstacle feature if the planimetrically intersect any input approach surface multipatch feature.

Field	Example	Populated with
Type_Code	"Type_Code": "Stack"	Input Obstacle Features Type_Code field. It is given as the description for its coded domain value or as Unknown if no domain value is found or if the input is null.
HACCM	"HACCM": 0.304801	Input Obstacle Features HORIZACC_VAL field, converted to meters. It is given as -1.0 if the input is null.
VACCM	"VACCM": 0.304801	Input Obstacle Features VERTACC_VAL field, converted to meters. It is given as -1.0 if the input is null.
Height	"Height": 16.664848	Value of Input Obstacle Height parameter (feature geometry or input field) converted to meters.
GNDElev	"GNDElev": 335.647491	The ground elevation at the Input Obstacle's location from Elevation Source (DEM or input field) converted to meters.
NormalDist	"NormalDist": 946.035675	The distance, in meters, between the obstacle and the nearest point on the runway centerline.
Offset	"Offset": 143.128218	The distance, in meters, between the obstacle and the nearest point on the extended runway centerline.
X	"X": -95.953753	The x-coordinate of the obstacle in WGS84 decimal degrees.
Y	"Y": 45.550517	The y-coordinate of the obstacle in WGS84 decimal degrees.
ZVMC	"ZVMC": 352.31234	The elevation of the top of the obstacle (Height + GNDElev) in meters.
OIS	"OIS": 384.942139	The z-value of the OIS at the obstacle's location.
Penetrates	"Penetrates": false	A value of true if ZVMC is greater than or equal to OIS; otherwise, false.
Label	"Label": "362"	The value of the Obstacle Labels input parameter.

Uso

• The Input Runway Features parameter must be z-enabled and have projected horizontal and vertical coordinate systems defined. It must include a populated Runway Designator text field, which must be named as one of the following from the ArcGIS Aviation data models:

  • RWYDESG
  • RUNWAYDESIGNATORIDENTIFIER
  • DESIGNATOR_TXT

  Sugerencia:

  Recommended input features are RunwayCenterline from the Airports data models (18B or 18C) or ADHPSurfaceLine from the AIS data model. For more information, see the respective schemas for attribute properties.

• The Input Obstacle Features parameter must be z-enabled and have projected horizontal and vertical coordinate systems defined.

  Sugerencia:

  Recommended input features are VerticalStructurePoint, VerticalStructureLine, and VerticalStructurePolygon from the Airports 18B or 18C data models. For more information, see the respective schemas for the attribute properties.

• The Input Obstacle Features parameter should include a field to represent the type of obstacle that is used by the tool to populate the "Type_Code" values in the OBSTACLEJSON field results. Null values in this field will be written as Unknown in the output. Permissible field names are any of the following:

  • TYPE_CODE
  • OBSTACLETY
  • OBSTACLETYPECODE
  • ObsType
  • OBJECTTYPECODE
  • OBJECTTYPE

• The Input Obstacle Features parameter can include the following fields. If present, the values of these fields will contribute to the HACCM and VACCM fields in the output OBSTACLEJSON values:

  • HORIZACC_VAL
  • HORIZACC_UOM
  • VERTACC_VAL
  • VERTACC_UOM

• The Target OIS Features parameter must be a multipatch feature class, with projected horizontal and vertical coordinate systems defined, contain approach features, and include the following fields:

  • RWYDESG or LANDINGSTRIPDESIGIDENTIFIER or DESIGNATOR_TXT (Populated with a runway designator, for example, '09/27')
  • NAME (Populated with the value 'Approach Surface')
  • OBSTACLEJSON (Populated by the tool)

    Sugerencia:

    Recommended input features are ObstructionIdSurface_MP from the Airports 18B or 18C data models. The approach features can be generated with one of the tools from the Obstruction Identification Surfaces toolset.

    Nota:

    The field length must be at least 50,000 characters. A warning appears if the JSON output exceeds the length of the OBSTACLEJSON field.

• Input Obstacle Feature elevations are specified by the Obstacle Feature Height Type parameter. Use the Absolute Height (ABSOLUTE_HEIGHT in Python) option if the input data includes feature geometry or a numeric attribute field with the elevation value of the top of the obstacle above mean sea level. Use the Relative Height (RELATIVE_HEIGHT in Python) option if feature geometry or a numeric attribute field contains the value of the obstacle height above ground level.

  

• This tool requires base elevation data to function correctly. That data can come from one or more underlying digital elevation models (DEMs) or from a numeric attribute field in the input obstacle feature class. One or the other must be provided, with the appropriate option specified using the Elevation Source parameter.

• The tool will use a flight path ID field (PATHID, text, Nullable, or 255) for the Target OIS Features parameter to associate curved approach polylines with specific approach surfaces. This is required if you have an Input Flight Path Features parameter value. Use this value for the Target OIS Features parameter with the OBJECTID field of the corresponding Input Flight Path Features parameter value. This will be populated by the Create Curved Approach tool when creating the curved approach surface or surfaces.

• If the tool is run repeatedly with different Input Obstacle Features parameter values, it will append the generated JSON data for each set of obstacles to each affected approach surface feature. Subsequently running the tool with an updated version of given Input Obstacle Features values will selectively update the JSON data for those features without affecting the JSON data generated using other Input Obstacle Features values.

Parámetros

Cuadro de diálogo

Etiqueta	Explicación	Tipo de datos
Input Runway Features	The input runway dataset. The feature class must be z-enabled and contain polylines.	Feature Layer
Input Elevation Model (Opcional)	The DEMs covering the obstacles, used to derive base elevation values. This parameter is used if Elevation Source is set to Elevation DEM.	Raster Layer
Input Obstacle Features	The input obstacle features that will be analyzed. The feature class must be z-enabled.	Feature Layer
Target OIS Features	The multipatch features with defined airport data model schema. The feature class must be z-enabled.	Feature Layer
Obstacle Height (Opcional)	The field containing the height of the obstacle features or the keyword FEATURE_GEOMETRY to indicate obstacle feature geometry z-coordinate values. Feature Geometry—The field containing the height of the obstacle features.	String
Unit (Opcional)	Specifies the obstacle height unit of measure. Kilometers—The unit is kilometers. Meters—The unit is meters. Decimeters—The unit is decimeters. Centimeters—The unit is centimeters. Millimeters—The unit is millimeters. Nautical Miles—The unit is nautical miles. Miles—The unit is miles. Yards—The unit is yards. Feet—The unit is feet. Inches—The unit is inches Decimal Degrees—The unit is decimal degrees. Points—The unit is points. Unknown—The unit is unknown.	String
Input Flight Path Features (Opcional)	The polyline features that define curved approaches to the specified runways. If unspecified, all input features will be processed as straight approaches.	Feature Layer
Obstacle Labels (Opcional)	A field from the input obstacle feature class. When an obstacle JSON generated by this tool is later used to create a Terrain and Obstacle Profile element in a layout, the data from the selected field will be used to label the input point obstacles in that element. The Obstacle Labels parameter only applies to Input Obstacle Features parameter values that contain point features. Nota: If no value is specified, the ObjectID will be applied by default.	String
Obstacle Feature Height Type (Opcional)	Specifies how the tool interprets obstacle height values. Absolute height— Obstacle heights are measured from sea level. Relative height— Obstacle heights are measured from ground level. This is the default.	String
Elevation Source (Opcional)	Specifies where the tool finds the obstacle base elevation heights. Elevation field— Base elevation heights will be found in a numeric field of the obstacle feature class. Elevation DEM— Base elevation heights will be found by deriving them from one or more DEMs. This is the default.	String
Elevation Field (Opcional)	The field containing base elevation heights of the obstacle features. This parameter is used if Elevation Source is set to Elevation field. The default is the first numeric field in the obstacle feature class.	String
Elevation Field Units (Opcional)	Specifies the linear unit of the base elevation values. This parameter is used if Elevation Source is set to Elevation field. Kilometers—The unit is kilometers. Meters—The unit is meters. This is the default. Decimeters—The unit is decimeters. Centimeters—The unit is centimeters. Millimeters—The unit is millimeters. Nautical miles—The unit is nautical miles. Miles—The unit is miles. Yards—The unit is yards. Feet—The unit is feet. Inches—The unit is inches Decimal degrees—The unit is decimal degrees. Points—The unit is points. Unknown—The unit is unknown.	String

Salida derivada

Etiqueta	Explicación	Tipo de datos
Output OIS Features	The updated multipatch feature class.	Feature Layer

Python

arcpy.aviation.GenerateOISObstacleData(in_runway_features, {in_dems}, in_obstacle_features, target_ois_features, {obstacle_height_field}, {obstacle_height_unit}, {in_flightpath_features}, {label_field}, {height_option}, {elevation_option}, {elevation_field}, {elevation_field_unit})

Nombre	Explicación	Tipo de datos
in_runway_features	The input runway dataset. The feature class must be z-enabled and contain polylines.	Feature Layer
in_dems [in_dems,...] (Opcional)	The DEMs covering the obstacles, used to derive base elevation values. This parameter is used if elevation_option is set to ELEVATION_DEM.	Raster Layer
in_obstacle_features	The input obstacle features that will be analyzed. The feature class must be z-enabled.	Feature Layer
target_ois_features	The multipatch features with defined airport data model schema. The feature class must be z-enabled.	Feature Layer
obstacle_height_field (Opcional)	The field containing the height of the obstacle features or the keyword FEATURE_GEOMETRY to indicate obstacle feature geometry z-coordinate values. FEATURE_GEOMETRY—The field containing the height of the obstacle features.	String
obstacle_height_unit (Opcional)	Specifies the obstacle height unit of measure. KILOMETERS—The unit is kilometers. METERS—The unit is meters. DECIMETERS—The unit is decimeters. CENTIMETERS—The unit is centimeters. MILLIMETERS—The unit is millimeters. NAUTICAL_MILES—The unit is nautical miles. MILES—The unit is miles. YARDS—The unit is yards. FEET—The unit is feet. INCHES—The unit is inches DECIMAL_DEGREES—The unit is decimal degrees. POINTS—The unit is points. UNKNOWN—The unit is unknown.	String
in_flightpath_features (Opcional)	The polyline features that define curved approaches to the specified runways. If unspecified, all input features will be processed as straight approaches.	Feature Layer
label_field (Opcional)	A field from the input obstacle feature class. When an obstacle JSON generated by this tool is later used to create a Terrain and Obstacle Profile element in a layout, the data from the selected field will be used to label the input point obstacles in that element. The Obstacle Labels parameter only applies to Input Obstacle Features parameter values that contain point features. Nota: If no value is specified, the ObjectID will be applied by default.	String
height_option (Opcional)	Specifies how the tool interprets obstacle height values. ABSOLUTE_HEIGHT— Obstacle heights are measured from sea level. RELATIVE_HEIGHT— Obstacle heights are measured from ground level. This is the default.	String
elevation_option (Opcional)	Specifies where the tool finds the obstacle base elevation heights. ELEVATION_FIELD— Base elevation heights will be found in a numeric field of the obstacle feature class. ELEVATION_DEM— Base elevation heights will be found by deriving them from one or more DEMs. This is the default.	String
elevation_field (Opcional)	The field containing base elevation heights of the obstacle features. This parameter is used if elevation_option is set to ELEVATION_FIELD. The default is the first numeric field in the obstacle feature class.	String
elevation_field_unit (Opcional)	Specifies the linear unit of the base elevation values. This parameter is used if elevation_option is set to ELEVATION_FIELD. KILOMETERS—The unit is kilometers. METERS—The unit is meters. This is the default. DECIMETERS—The unit is decimeters. CENTIMETERS—The unit is centimeters. MILLIMETERS—The unit is millimeters. NAUTICAL_MILES—The unit is nautical miles. MILES—The unit is miles. YARDS—The unit is yards. FEET—The unit is feet. INCHES—The unit is inches DECIMAL_DEGREES—The unit is decimal degrees. POINTS—The unit is points. UNKNOWN—The unit is unknown.	String

Salida derivada

Nombre	Explicación	Tipo de datos
out_ois_features	The updated multipatch feature class.	Feature Layer

Muestra de código

GenerateOISObstacleData example (stand-alone script)

The following Python window script demonstrates how to use the GenerateOISObstacleData tool.

import arcpy

# set gp environment
arcpy.CheckOutExtension("Airports")

# Input RunwayCenterline Feature Class
inRunwayFeatures = r"C:\data\ois.gdb\RunwayCenterlines"

# Input Terrain DEM Raster
inDEMRaster = [r"C:\data\ois.gdb\AirportFirstDEM",
               r"C:\data\ois.gdb\AirportSecondDEM"]

# Input Obstacle Feature Class
inOISObstacles = r"C:\data\ois.gdb\Obstacles"

# Input Obstruction Identification Surface Feature Class
targetOISFeatures = r"C:\data\ois.gdb\ObstructionIdSurface"

# Input Curved Approach Feature Class
inCurvedApproachFeatures = r"C:\data\ois.gdb\CurvedApproach"

# Processing GenerateOISObstacleData
arcpy.GenerateOISObstacleData_aviation(inRunwayFeatures, inDEMRaster,
                                       inOISObstacles, targetOISFeatures,
                                       "HEIGHT_VAL", "FEET", inCurvedApproachFeatures, "OBJECTID","RELATIVE_HEIGHT","ELEVATION_DEM")


arcpy.CheckInExtension("Airports")

Entornos

Espacio de trabajo actual

Casos especiales

Información de licenciamiento

• Basic: No
• Standard: Requiere ArcGIS Aviation Charting
• Advanced: No