Comportamiento de evento para la retirada de rutas

Disponible con licencia de Location Referencing.

Al retirar rutas, los eventos se ven afectados en función del comportamiento de evento configurado para cada capa de eventos.

Nota:

Events are not updated until the Apply Event Behaviors tool is applied after route edits. If you are using conflict prevention, you are prompted to run Apply Event Behaviors before posting can be completed.

Nota:

When recalibrate downstream is chosen for an LRS route edit, the configured calibrate event behavior is applied to downstream sections.

The following sections detail the results of executing the Apply Event Behaviors tool on event features after a corresponding route edit.

Route retirement scenario

The following retirement scenario involves one route and three events. The retirement (depicted with a dashed line) starts in Event1, completely spans Event2, and ends in Event3.

Before retirement

Stay Put behavior

The geographic location of the event outside of the retire region is preserved; the measures can change. The event can also split if it crosses the retire region. Portions of the reassign region are retired.

Stay Put behavior

Move behavior

The measures and route of the event are maintained; the geographic location can change.

Move behavior

Retire behavior

The geographic location and measure of the event are preserved; the event is retired. Events intersecting the retire region are retired.

Retire behavior

Upstream and downstream sections

Route editing impacts upstream and downstream sections differently.

The following diagram shows the upstream and downstream sections for the route retirement scenario:

Upstream and downstream sections

The following table details how the retirement editing activity impacts upstream and downstream events according to the configured event behavior:

Behavior Events upstream Events intersecting Events downstream

Stay Put

No action.

Retire event; line events crossing the edit region are split and the original event retired.

If route calibration is changed, the recalibrate event behavior is applied; otherwise, no action.

Move

Shape regenerated, if needed, to new location of route measures.

Shape regenerated to new location of route measures.

If route calibration is changed, the recalibrate event behavior is applied; otherwise, no action.

Retire

No action.

Retire event; line events crossing edit region are not split.

If route calibration is changed, the recalibrate event behavior is applied; otherwise, no action.

Nota:
  • Point events follow the same behavior as line events but don't need to be split.
  • If the Recalibrate route downstream option is chosen, calibrate route event behaviors are applied to the events downstream of the edited portion of the route.
  • The network can contain events that span multiple routes in a line network. In this case, the behaviors are still applied in the same manner.
  • Since the LRS is time aware, edit activities—such as retiring a route—time slice routes and events.

Detailed behavior results

The following sections detail how event behavior rules are enforced when a route is retired.

Stay Put behavior

The route is active from 1/1/2000, and if the retirement is set to occur on 1/1/2005 and Recalibrate route downstream is not chosen, this has the following effects:

  • Event1 is represented by two time slices. There is a time slice from 1/1/2000 to 1/1/2005, with the original measures from 0 to 20, and a time slice from 1/1/2005 to <Null>, with measures from 0 to 15, that stay the same location geographically.
  • Event2 retires to maintain geographic location.
  • Event3 is represented by two time slices. There is a time slice from 1/1/2000 to 1/1/2005, with the original measures from 30 to 45, and a time slice from 1/1/2005 to <Null>, with measures from 35 to 45, that stay the same geographically.

Before Stay Put event behavior

The following diagram provides details about the route before retirement:

Before Stay Put event behavior

The following table provides details about the events before retirement:

EventRoute NameFrom DateTo DateFrom MeasureTo Measure

Event1

Route1

1/1/2000

<Null>

0

20

Event2

Route1

1/1/2000

<Null>

20

30

Event3

Route1

1/1/2000

<Null>

30

45

After Stay Put event behavior

The following diagram provides details about the route after retirement:

After Stay Put event behavior

The following table provides details about the events after retirement when Stay Put is the configured event behavior:

EventRoute NameFrom DateTo DateFrom MeasureTo MeasureLocation Error

Event1

Route1

1/1/2000

1/1/2005

0

20

No Error

Event1

Route1

1/1/2005

<Null>

0

15

No Error

Event3

Route1

1/1/2000

1/1/2005

30

45

No Error

Event3

Route1

1/1/2005

<Null>

35

45

No Error

Move behavior

The route is active from 1/1/2000, and if the retirement is set to occur on 1/1/2005 and Recalibrate route downstream is not chosen, this has the following effects:

  • Event1 is represented by two time slices. There is a time slice from 1/1/2000 to 1/1/2005 and a time slice from 1/1/2005 to <Null>, both with the original measures from 0 to 20. This new time slice will only partially locate since the event time slice has measures from 0 to 20, but the underlying route time slice only has measures from 0 to 15 and 35 to 55, with a physical gap created due to retirement.
  • Event2 is represented by two time slices. There is a time slice from 1/1/2000 to 1/1/2005 and a time slice from 1/1/2005 to <Null>, both with the measures from 20 to 30. This new time slice will not locate since the event time slice has measures from 20 to 30, but the underlying route does not have a route with those measures.
  • Event3 is represented by two time slices. There is a time slice from 1/1/2000 to 1/1/2005 and a time slice from 1/1/2005 to <Null>, both with the original measures 30 to 45. This new time slice only partially locates since the event time slice has measures from 30 to 45, but the underlying route time slice only has measures from 0 to 15 and 35 to 55, with a physical gap created due to retirement.

Before Move event behavior

The following diagram provides details about the route before retirement:

Before Move event behavior

The following table provides details about the events before retirement:

EventRoute NameFrom DateTo DateFrom MeasureTo Measure

Event1

Route1

1/1/2000

<Null>

0

20

Event2

Route1

1/1/2000

<Null>

20

30

Event3

Route1

1/1/2000

<Null>

30

45

After Move event behavior

The following diagram provides details about the route after retirement:

After Move event behavior

The following table provides details about the events after retirement when Move is the configured event behavior:

EventRoute NameFrom DateTo DateFrom MeasureTo MeasureLocation Error

Event1

Route1

1/1/2000

1/1/2005

0

20

No Error

Event1

Route1

1/1/2005

<Null>

0

20

Partial match for the To measure

Event3

Route1

1/1/2000

1/1/2005

30

45

No Error

Event3

Route1

1/1/2005

<Null>

30

45

Partial match for the From measure

Retire behavior

The route is active from 1/1/2000, and if the retirement is set to occur on 1/1/2005 and Recalibrate route downstream is not chosen, this has the following effects:

  • Event1 retires since it intersects the retired region.
  • Event2 retires since it is completely inside the retired region.
  • Event3 retires since it intersects the retired region.

Before Retire event behavior

The following diagram provides details about the route before retirement:

Before Retire event behavior

The following table provides details about the events before retirement:

EventRoute NameFrom DateTo DateFrom MeasureTo Measure

Event1

Route1

1/1/2000

<Null>

0

20

Event2

Route1

1/1/2000

<Null>

20

30

Event3

Route1

1/1/2000

<Null>

30

45

After Retire event behavior

The following diagram provides details about the route after retirement:

After Retire event behavior

The following table provides details about the events after retirement when Retire is the configured event behavior:

EventRoute NameFrom DateTo DateFrom MeasureTo MeasureLocation Error

Event1

Route1

1/1/2000

1/1/2005

0

20

No Error

Event2

Route1

1/1/2000

1/1/2005

20

30

No Error

Event3

Route1

1/1/2000

1/1/2005

30

45

No Error

Comportamiento detallado en las rutas de una red de línea con eventos que abarcan rutas

Comportamiento Permanencia

Este escenario de retirada implica cuatro rutas en una línea en una red de línea y dos eventos. La Ruta3 se retirará. La ruta retirada (representada con una línea de puntos) afecta al Evento1 y al Evento2.

Las rutas están activas desde el 1/1/2000 y, si la retirada se configura para que se produzca el 1/1/2005 y Recalibrar ruta aguas abajo está desactivada, el resultado será el siguiente:

  • El Evento1 se representará mediante dos intervalos de tiempo. Habrá un intervalo de tiempo del 1/1/2000 al 1/1/2005, con las mediciones originales de 0 a 30 en la Ruta1 y la Ruta3, y un intervalo de tiempo del 1/1/2005 a <nulo>, con mediciones de 0 en la Ruta1 a 22 en la Ruta2, ya que permanece en la misma ubicación geográficamente. La parte del evento sobre la Ruta3 se retirará, dado que ya no hay ruta sobre la que construir esa parte de la forma del evento.
  • El Evento2 se representará mediante dos intervalos de tiempo. Habrá un intervalo de tiempo del 1/1/2000 al 1/1/2005, con las mediciones originales de 30 en la Ruta3 a 48 en la Ruta4, y un intervalo de tiempo del 1/1/2005 a <nulo>, con mediciones de 38 en la Ruta4 a 48 en la Ruta4, ya que permanece en la misma ubicación geográficamente. La parte del evento sobre la Ruta3 se retirará, dado que ya no hay ruta sobre la que construir esa parte de la forma del evento.

Antes del comportamiento de evento Permanencia

The following table provides details about the events before retirement:

Antes del comportamiento de evento Permanencia

Id. de eventoFecha inicialFecha finalRouteID inicialId. de ruta finalMedición InicialMedición Final

Evento1

1/1/2000

<nulo>

Ruta1

Ruta3

0

30

Evento2

1/1/2000

<nulo>

Ruta3

Ruta4

30

48

Después del comportamiento de evento Permanencia

The following diagram provides details about the route after retirement:

Después del comportamiento de evento Permanencia

Id. de eventoFecha inicialFecha finalRouteID inicialId. de ruta finalMedición InicialMedición FinalError de ubicación

Evento1

1/1/2000

1/1/2005

Ruta1

Ruta3

0

30

Sin error

Evento1

1/1/2005

<nulo>

Ruta1

Ruta2

0

22

Sin error

Evento2

1/1/2000

1/1/2005

Ruta3

Ruta4

30

48

Sin error

Evento2

1/1/2005

<nulo>

Ruta4

Ruta4

38

48

Sin error

Comportamiento Mover

Las rutas están activas desde el 1/1/2000 y, si la retirada se configura para que se produzca el 1/1/2005 y Recalibrar ruta aguas abajo está desactivada, el resultado será el siguiente:

  • El Evento1 se representará mediante dos intervalos de tiempo. Habrá un intervalo de tiempo del 1/1/2000 al 1/1/2005 y un intervalo de tiempo del 1/1/2005 a <nulo>, ambos con las mediciones originales de 0 en la Ruta1 a 30 en la Ruta3. Este nuevo intervalo de tiempo solo se ubicará parcialmente porque el intervalo de tiempo del evento tiene mediciones de 0 a 30 de la Ruta1 a la Ruta3, pero la Ruta3 se ha retirado, por lo que no hay ninguna ruta en esa ubicación para crear una forma.
  • El Evento2 se representará mediante dos intervalos de tiempo. Habrá un intervalo de tiempo del 1/1/2000 al 1/1/2005 y un intervalo de tiempo del 1/1/2005 a <nulo>, ambos con las mediciones de 30 en la Ruta3 a 48 en la Ruta4. Este nuevo intervalo de tiempo no se ubicará porque el intervalo de tiempo del evento tiene mediciones de 30 a 48 de la Ruta3 a la Ruta4, pero la Ruta3 se ha retirado, por lo que no hay ninguna ruta en esa ubicación para crear una forma.

Antes del comportamiento de evento Mover

The following table provides details about the events before retirement:

Antes del comportamiento de evento Mover

Id. de eventoFecha inicialFecha finalRouteID inicialId. de ruta finalMedición InicialMedición Final

Evento1

1/1/2000

<nulo>

Ruta1

Ruta3

0

30

Evento2

1/1/2000

<nulo>

Ruta3

Ruta4

30

48

Después del comportamiento de evento Mover

The following diagram provides details about the route after retirement:

Después del comportamiento de evento Mover

Id. de eventoFecha inicialFecha finalRouteID inicialId. de ruta finalMedición InicialMedición FinalError de ubicación

Evento1

1/1/2000

1/1/2005

Ruta1

Ruta3

0

30

Sin error

Evento1

1/1/2005

<nulo>

Ruta1

Ruta3

0

30

Coincidencia parcial para la Medición final

Evento2

1/1/2000

1/1/2005

Ruta3

Ruta4

30

48

Sin error

Evento2

1/1/2005

<nulo>

Ruta3

Ruta4

30

48

Coincidencia parcial para la Medición inicial

Comportamiento Retirar

Las rutas están activas desde el 1/1/2000 y, si la retirada se configura para que se produzca el 1/1/2005 y Recalibrar ruta aguas abajo está desactivada, el resultado será el siguiente:

  • El Evento1 se retirará, dado que se encuentra dentro de la región retirada.
  • El Evento2 se retirará, dado que se encuentra dentro de la región retirada.

Antes del comportamiento de evento Retirar

The following table provides details about the events before retirement:

Después del comportamiento de evento Retirar

Id. de eventoFecha inicialFecha finalRouteID inicialId. de ruta finalMedición InicialMedición Final

Evento1

1/1/2000

<nulo>

Ruta1

Ruta3

0

30

Evento2

1/1/2000

<nulo>

Ruta3

Ruta4

30

48

Después del comportamiento de evento Retirar

The following diagram provides details about the route after retirement:

En el diagrama y la tabla siguientes, ambos eventos se retiran sin ningún registro en la tabla de atributos.

Después del comportamiento de evento Retirar

Id. de eventoFecha inicialFecha finalRouteID inicialId. de ruta finalMedición InicialMedición FinalError de ubicación

Evento1

1/1/2000

1/1/2005

Ruta1

Ruta3

0

30

Sin error

Evento2

1/1/2000

1/1/2005

Ruta3

Ruta4

30

48

Sin error