Network Analyst layer properties

Resumen

The Describe function returns the properties described below for Network Analyst layers.

For a Network Analyst layer, the dataType property of the Describe function returns a value of "NALayer".

A Network Analyst layer contains information about the inputs and parameters used in the analysis of a network problem using the Network Analyst extension.

Propiedades

Propiedad	Explicación	Tipo de datos
network (Sólo lectura)	The Network Dataset object. This object can be used to get all the properties, such as catalogPath, of the underlying network dataset used by the analysis layer.	Object
nameString (Sólo lectura)	The name of the Network Analyst layer.	String
solverName (Sólo lectura)	The Network Analyst solver referenced by the layer. Each layer can reference only one solver. This property returns the following keywords: Closest Facility Solver Last Mile Delivery Solver Location-Allocation Solver OD Cost Matrix Solver Route Solver Service Area Solver Vehicle Routing Problem Solver	String
impedance (Sólo lectura)	The network cost attribute used as the impedance during the analysis.	String
accumulators (Sólo lectura)	A semicolon-separated list of network cost attributes that are accumulated as part of the analysis.	String
restrictions (Sólo lectura)	A semicolon-separated list of restriction attributes that are applied for the analysis.	String
ignoreInvalidLocations (Sólo lectura)	Specifies whether invalid network locations in the Network Analyst classes are ignored by the solver. A value of True indicates that the invalid locations are ignored by the solver. A value of False indicates that the invalid locations are not ignored by the solver.	Boolean
uTurns (Sólo lectura)	Specifies how the U-turns at junctions, which could occur during network traversal between stops, are handled by the solver. This property returns the following keywords: ALLOW_UTURNS NO_UTURNS ALLOW_DEAD_ENDS_ONLY ALLOW_DEAD_ENDS_AND_INTERSECTIONS_ONLY	String
useHierarchy (Sólo lectura)	Specifies whether the Network Analyst layer is using hierarchy. This property returns the following keywords: USE_HIERARCHY NO_HIERARCHY	String
hierarchyAttribute (Sólo lectura)	The name of the hierarchy attribute.	String
hierarchyLevelCount (Sólo lectura)	The number of hierarchy ranges used to define the hierarchy attribute. The maximum value is 3.	Integer
maxValueForHierarchyX (Sólo lectura)	A given hierarchy attribute can have values that define the hierarchy ranges. The maximum values for each range can be obtained from the maxValueForHierarchyX property, where X indicates the hierarchy level. For example, the maximum value for the first hierarchy range (used to define the primary roads) can be obtained from the maxValueForHierarchy1 property. Use the hierarchyLevelCount property to determine the possible number of maxValueForHierarchy properties for a given hierarchy attribute. For example, if the hierarchyLevelCount property returns 3, the Describe object will support the MaxValueForHierarchy1 and MaxValueForHierarchy2 properties.	Integer
locatorCount (Sólo lectura)	The total number of classes that are searched to determine a network location.	Integer
locators (Sólo lectura)	The Network Analyst Locator object. This object can be used to obtain the name, snap type, and search query information for the classes that are used for finding network locations.	Object
findClosest (Sólo lectura)	Specifies how the network source features are searched when locating network analysis objects. This property returns the following keywords: MATCH_TO_CLOSEST PRIORITY	String
searchTolerance (Sólo lectura)	A space-separated string indicating the search tolerance and the units used when finding the network locations.	String
excludeRestrictedElements (Sólo lectura)	Specifies whether the network analysis objects can be located only on traversable portions of network sources This property returns the following keywords: INCLUDE EXCLUDE	String
solverProperties (Sólo lectura)	The Network Analyst Solver object. This object can be used to determine the solver-specific properties in a Network Analyst layer. Nota: Last mile delivery analysis layers do not have this property.	Object
children (Sólo lectura)	Returns a list of Describe objects that reference individual network analysis classes (such as stops and routes) as layers. This property cannot be used with a network analysis layer stored on disk as a layer file.	List
parameterCount (Sólo lectura)	The total number of attribute parameters defined for all the network attributes of the underlying network dataset used by the Network Analyst layer.	Integer
parameters (Sólo lectura)	The Network Attribute Parameter object. This object can be used to determine the attribute parameters for the network analysis.	Object
SolverOverrides (Sólo lectura)	Nota: This property is for internal use only.	String

Muestra de código

Network Analyst layer properties example

Display properties of a specified Network Analyst layer file.

# Name: NALayerProperties_ex01.py
# Description: Lists all the properties that can be derived by describing a 
#              network analysis layer.

import arcpy

#Arguments..
#in_layer is the name of the Network Analysis layer file to be described.  
in_layer = "C:/Data/Route.lyr"  

#Get the description object using Describe. 
desc = arcpy.Describe(in_layer) 

arcpy.AddMessage(" ")
arcpy.AddMessage("== Description of network analysis layer " + in_layer + " ==")
arcpy.AddMessage(" ") 

#Print general infomation.
justify = 35 
nds = desc.network 
solvername = desc.solverName 
arcpy.AddMessage("---- General information:") 
arcpy.AddMessage(" %*s: %s" % (justify, "Network" , nds.catalogPath)) 
arcpy.AddMessage(" %*s: %s" % (justify, "SolverName" , desc.solverName)) 
arcpy.AddMessage(" %*s: %s" % (justify, "Impedance" , desc.impedance)) 
arcpy.AddMessage(" %*s: %s" % (justify, "Accumulators" , desc.accumulators)) 
arcpy.AddMessage(" %*s: %s" % (justify, "Restrictions" , desc.restrictions)) 
arcpy.AddMessage(" %*s: %s" % (justify, "Ignore invalid locations?" , 
                str(desc.ignoreInvalidLocations))) 
arcpy.AddMessage(" %*s: %s" % (justify, "UTurn policy" , desc.UTurns)) 
arcpy.AddMessage(" %*s: %s" % (justify, "Using hierarchy?" , desc.useHierarchy))
arcpy.AddMessage(" %*s: %s" % (justify, "Exclude Restricted Elements?" ,
                               desc.excludeRestrictedElements))
arcpy.AddMessage(" ") 

#A note about the dynamic properties (indicated by X in the help system)
#In order to access the dynamic properties use Python's built in getattr()
#function. In order to find out if a dynamic property is supported by the 
#describe object, use Python's built in hasattr() function. 

# Print attribute parameter information
arcpy.AddMessage(" ---- Attribute Parameter information ----") 
count = desc.parameterCount 
if count == 0: 
    arcpy.AddMessage(" ---- No Attribute Parameters defined ----") 
else: 
    parameters = desc.parameters 
    for i in range(0, count): 
        attributeName = getattr(parameters,"attributeName" + str(i)) 
        parameterName = getattr(parameters, "parameterName" + str(i)) 
        parameterValue = getattr(parameters, "parameterValue" + str(i)) 
        arcpy.AddMessage(" %*s: %s: %s" % (justify, attributeName, 
                                           parameterName, parameterValue))   

# Print hierarchy information
if desc.useHierarchy.lower() == "use_hierarchy": 
    arcpy.AddMessage(" ---- Hierarchy information ----")
    arcpy.AddMessage(" %*s: %s" % (justify, "Hierarchy Attribute Name",
                                   desc.hierarchyAttribute)) 
    count = desc.hierarchyLevelCount
    arcpy.AddMessage(" %*s: %d" % (justify, "Hierarchy Level Count" , count)) 
    
    for i in range(0, count ): 
        levelRange = "" 
        if i == 0:      
            levelUB = getattr(desc,"maxValueForHierarchy" + str(i+1))            
            levelRange = "up to %s" % levelUB 
        elif i == (count - 1): 
            prevLevelUB = getattr(desc, "maxValueForHierarchy" + str(i)) 
            levelRange = "%s and higher" % (prevLevelUB + 1)
        else: 
            prevLevelUB =  getattr(desc, "maxValueForHierarchy" + str(i)) 
            levelUB = getattr(desc,"maxValueForHierarchy" + str(i + 1)) 
            levelRange = "%s - %s" % ((prevLevelUB + 1), levelUB)
        
        arcpy.AddMessage(" %*s %d range: %s" % (justify, "level", (i + 1), 
                                                levelRange))

    arcpy.AddMessage(" ") 

# Print locator information. 
arcpy.AddMessage("---- Locator information:") 
count = desc.locatorCount 
arcpy.AddMessage(" %*s: %d" % (justify, "Count" , count)) 
arcpy.AddMessage(" %*s: %s" % (justify, "Find Closest?" , desc.findClosest)) 
arcpy.AddMessage(" %*s: %s" % (justify, "Search Tolerance", 
                               desc.searchTolerance))
arcpy.AddMessage(" %*s: %s" % (justify, "Exclude Restricted Elements",
                               desc.excludeRestrictedElements))
locators = desc.locators 
for i in range(0, count): 
    sourceName = getattr(locators, "source" + str(i)) 
    sourceType = getattr(locators, "snapType" + str(i))
    searchQuery = getattr(locators, "searchQuery" + str(i))
    arcpy.AddMessage(" %*s: %s" %(justify, sourceName, sourceType))
    arcpy.AddMessage(" %*s: %s" %(justify, sourceName, searchQuery))