Volver al principio

Identify Contours (Topographic Production)

En este tema

  1. Resumen
  2. Uso
  3. Parámetros
  4. Entornos
  5. Información de licenciamiento

Resumen

Identifies types of contours and applies hypsographic codes to input features.

Uso

  • This tool processes each input contour and identifies the contour type. It uses the underlying raster and contour features to identify the type of contour. It then updates the contour code field with the appropriate domain code.

  • This tool identifies the following types of contours:

    • Index
    • Intermediate
    • Depression index
    • Depression intermediate

    • Precaución:

    Esta herramienta modifica los datos de entrada. Consulte Herramientas que modifican o actualizan los datos de entrada para obtener más información y estrategias para evitar cambios de datos no deseados.

  • If more than one input raster is used, all input rasters must have the same cell size, band count, and pixel type. All input rasters should also use the same elevation units (meters or feet).

  • If the Number of Depression Contours to Identify parameter value is negative or zero, the tool will not run.

Parámetros

Cuadro de diálogoPython

EtiquetaExplicaciónTipo de datos
Input Contours

The input contours that will be updated with the specified contour codes.

Feature Layer
Input Rasters

The rasters that will be used to derive elevations of points inside contours to correctly identify the types of contours.

Raster Layer; Mosaic Layer
Contour Height Field

The field in the input contour feature class that contains elevation values. This field type must be numeric.

Field
Contour Code Field

The field in the input contour feature class that will be updated with the appropriate domain code.

Field
Contour Index Interval
(Opcional)

The interval, or distance, between index contour lines. The default is 100.

Long
Index Code
(Opcional)

The value that will be used to populate the Contour Code Field parameter value when index contours are identified. The default is 1.

String
Intermediate Code
(Opcional)

The value that will be used to populate the Contour Code Field parameter value when intermediate contours are identified. The default is 2.

String
Depression Code
(Opcional)

The value that will be used to populate the Contour Code Field parameter value when depression contours are identified. The default is 5.

String
Depression Intermediate Code
(Opcional)

The value that will be used to populate the Contour Code Field parameter value when depression intermediate contours are identified. The default is 6.

String
Number of Depression Contours to Identify
(Opcional)

The number of contours in a depression that will be coded as depressions. The value provided must be greater than zero. If no value is provided, all of the contours in the depression will be coded as depressions.

Long
Area of Interest
(Opcional)

The layer that defines the processing extent. The layer must have only one selected feature.

Feature Layer
Z Factor
(Opcional)

The conversion factor that will be used to convert the contour elevation value unit of measurement to match the raster's unit of measurement. The default is 1.

For example, if the elevation values in the input raster are in meters but the contours are in feet, set the z-factor to 3.28084 (1 meter = 3.28084 feet).

Double
Supplemental Contours
(Opcional)

Specifies the interval at which supplemental contours will be created. Supplemental contours are used when the terrain change is not large enough to be depicted with consistent contour intervals.

  • None—No supplemental contours will be created. This is the default.
  • Half Auxiliary—Supplemental contours will be created at one-half the contour interval.
  • Quarter Auxiliary—Supplemental contours will be created at one-quarter the contour interval.
String
Half Auxiliary Code
(Opcional)

The code value that will be stored in the Contour Code Field parameter value when a half auxiliary contour is identified. The default code will be 3 if the HQC field exists in the input contour feature class.

String
Quarter Auxiliary Code
(Opcional)

The code value that will be stored in the Contour Code Field parameter value when a quarter auxiliary contour is identified. The default code will be 14 if the HQC field exists in the input contour feature class.

String
Depression Auxiliary Code
(Opcional)

The code value that will be stored in the Contour Code Field parameter value when a depression auxiliary contour is identified. The default code will be 22 if the HQC field exists in the input contour feature class.

String
Contour Interval
(Opcional)

The interval, or distance, between contour lines. This can be any positive number. The default is 20.

Double
Base Contour
(Opcional)

The value that contours will be generated above and below to cover the entire value range of the input raster. The default is 0.

Double

Salida derivada

EtiquetaExplicaciónTipo de datos
Updated Contours

The contour feature class where contour codes were updated.

Feature Layer

arcpy.topographic.IdentifyContours(in_contour_features, in_rasters, contour_height_field, contour_code_field, {contour_index_interval}, {index_code}, {intermediate_code}, {depression_code}, {depression_intermediate_code}, {depression_contours_count}, {area_of_interest}, {z_factor}, {supplemental_contours}, {half_auxiliary_code}, {quarter_auxiliary_code}, {depression_auxiliary_code}, {contour_interval}, {base_contour})
NombreExplicaciónTipo de datos
in_contour_features

The input contours that will be updated with the specified contour codes.

Feature Layer
in_rasters
[in_rasters,...]

The rasters that will be used to derive elevations of points inside contours to correctly identify the types of contours.

Raster Layer; Mosaic Layer
contour_height_field

The field in the input contour feature class that contains elevation values. This field type must be numeric.

Field
contour_code_field

The field in the input contour feature class that will be updated with the appropriate domain code.

Field
contour_index_interval
(Opcional)

The interval, or distance, between index contour lines. The default is 100.

Long
index_code
(Opcional)

The value that will be used to populate the contour_code_field parameter value when index contours are identified. The default is 1.

String
intermediate_code
(Opcional)

The value that will be used to populate the contour_code_field parameter value when intermediate contours are identified. The default is 2.

String
depression_code
(Opcional)

The value that will be used to populate the contour_code_field parameter value when depression contours are identified. The default is 5.

String
depression_intermediate_code
(Opcional)

The value that will be used to populate the contour_code_field parameter value when depression intermediate contours are identified. The default is 6.

String
depression_contours_count
(Opcional)

The number of contours in a depression that will be coded as depressions. The value provided must be greater than zero. If no value is provided, all of the contours in the depression will be coded as depressions.

Long
area_of_interest
(Opcional)

The layer that defines the processing extent. The layer must have only one selected feature.

Feature Layer
z_factor
(Opcional)

The conversion factor that will be used to convert the contour elevation value unit of measurement to match the raster's unit of measurement. The default is 1.

For example, if the elevation values in the input raster are in meters but the contours are in feet, set the z-factor to 3.28084 (1 meter = 3.28084 feet).

Double
supplemental_contours
(Opcional)

Specifies the interval at which supplemental contours will be created. Supplemental contours are used when the terrain change is not large enough to be depicted with consistent contour intervals.

  • NONE—No supplemental contours will be created. This is the default.
  • HALF_AUXILIARY—Supplemental contours will be created at one-half the contour interval.
  • QUARTER_AUXILIARY—Supplemental contours will be created at one-quarter the contour interval.
String
half_auxiliary_code
(Opcional)

The code value that will be stored in the contour_code_field parameter value when a half auxiliary contour is identified. The default code will be 3 if the HQC field exists in the input contour feature class.

String
quarter_auxiliary_code
(Opcional)

The code value that will be stored in the contour_code_field parameter value when a quarter auxiliary contour is identified. The default code will be 14 if the HQC field exists in the input contour feature class.

String
depression_auxiliary_code
(Opcional)

The code value that will be stored in the contour_code_field parameter value when a depression auxiliary contour is identified. The default code will be 22 if the HQC field exists in the input contour feature class.

String
contour_interval
(Opcional)

The interval, or distance, between contour lines. This can be any positive number. The default is 20.

Double
base_contour
(Opcional)

The value that contours will be generated above and below to cover the entire value range of the input raster. The default is 0.

Double

Salida derivada

NombreExplicaciónTipo de datos
updated_contour_features

The contour feature class where contour codes were updated.

Feature Layer

Muestra de código

IdentifyContours example (stand-alone script)

This Python stand-alone sample codes contours with proper attribution for Index, Intermediate, and Depression contours.

# Name: IdentifyContours_sample.py
# Description: Coding contours with proper attribution for Index, Intermediate, and Depression contours

# Import System Modules
import arcpy

# Check Out Extensions
arcpy.CheckOutExtension('Foundation')

# Setting the environment
arcpy.env.overwriteOutput = True

# Create feature layer for area of interest and select a single feature based on the NRN field
arcpy.management.MakeFeatureLayer(r'C:\Data\MapIndex.gdb\MapIndex\TM50_Index','TM50')
arcpy.management.SelectLayerByAttribute('TM50', "NEW_SELECTION", "NRN = 'V7914X17562'", None)

# Setting Local Variables
in_contour_features = r'C:\Data\TDS_7_1.gdb\TDS_CARTO\HypsographyCrv'
in_rasters = r'C:\Data\Monterey.dt2'
contour_height_field = 'ZVH'
contour_code_field = 'HQC'
contour_index_interval = 100
index_code = 1
intermediate_code = 2
depression_code = 5
depression_intermediate_code = 6
depression_contours_count = None
area_of_interest = 'TM50'
z_factor = 1
supplemental_contours = 'NONE'
half_auxiliary_code = '3'
quarter_auxiliary_code = '14'
depression_auxiliary_code = '22'
contour_interval = 20
base_contour = 0

# Calling the Identify Contours to properly attribute contours in HypsographyCrv feature class
arcpy.topographic.IdentifyContours(in_contour_features, in_rasters, contour_height_field, contour_code_field,
                                   contour_index_interval, index_code, intermediate_code, depression_code,
                                   depression_intermediate_code, depression_contours_count, area_of_interest,
                                   z_factor, supplemental_contours, half_auxiliary_code, quarter_auxiliary_code,
                                   depression_auxiliary_code, contour_interval, base_contour)

# Check In Extensions
arcpy.CheckInExtension('Foundation')

Entornos

Extensión

Información de licenciamiento

  • Basic: No
  • Standard: Requiere Production Mapping
  • Advanced: Requiere Production Mapping

Temas relacionados

  • An overview of the Features toolset
  • Buscar una herramienta de geoprocesamiento

¿Algún comentario sobre este tema?

En este tema
  1. Resumen
  2. Uso
  3. Parámetros
  4. Entornos
  5. Información de licenciamiento