概要
Modifies an existing linear referencing system (LRS) in the specified workspace.
使用法
The Modify LRS tool can be used on a feature class or table with or without geometry or records.
The route ID and centerline ID must be unique; however, the tool does not check for duplicate IDs.
This tool does not check for erroneous network IDs; if the network ID does not exist, it is considered erroneous.
For more information about configuring the LRS and field properties, see the ArcGIS Pipeline Referencing LRS data model or the ArcGIS Roads and Highways LRS data model.
構文
arcpy.locref.ModifyLRS(in_workspace, current_lrs_name, {new_lrs_name}, {centerline_feature_class}, {centerline_centerline_id_field}, {centerline_sequence_table}, {centerline_sequence_centerline_id_field}, {centerline_sequence_route_id_field}, {centerline_sequence_from_date_field}, {centerline_sequence_to_date_field}, {centerline_sequence_network_id_field}, {calibration_point_feature_class}, {calibration_point_measure_field}, {calibration_point_from_date_field}, {calibration_point_to_date_field}, {calibration_point_route_id_field}, {calibration_point_network_id_field}, {redline_feature_class}, {redline_from_measure_field}, {redline_to_measure_field}, {redline_route_id_field}, {redline_route_name_field}, {redline_effective_date_field}, {redline_activity_type_field}, {redline_network_id_field}, {conflict_prevention})
パラメーター | 説明 | データ タイプ |
in_workspace | The LRS workspace. | Workspace |
current_lrs_name | The name of the current LRS. | String |
new_lrs_name (オプション) | The new name of the current LRS. | String |
centerline_feature_class (オプション) | An existing centerline feature class for the minimum schema. | Feature Layer |
centerline_centerline_id_field (オプション) | The name of the centerline ID field from the existing centerline feature class that was chosen. | Field |
centerline_sequence_table (オプション) | An existing centerline sequence table for the minimum schema. | Table View |
centerline_sequence_centerline_id_field (オプション) | The name of the centerline ID field from the existing centerline sequence table that was chosen. | Field |
centerline_sequence_route_id_field (オプション) | The name of the route ID field from the existing centerline sequence table that was chosen. | Field |
centerline_sequence_from_date_field (オプション) | The name of the from date field from the existing centerline sequence table that was chosen. | Field |
centerline_sequence_to_date_field (オプション) | The name of the to date field from the existing centerline sequence table that was chosen. | Field |
centerline_sequence_network_id_field (オプション) | The name of the network ID field from the existing centerline sequence table that was chosen. | Field |
calibration_point_feature_class (オプション) | An existing calibration point feature class for the minimum schema. | Feature Layer |
calibration_point_measure_field (オプション) | The name of the measure field from the existing calibration point feature class that was chosen. | Field |
calibration_point_from_date_field (オプション) | The name of the from date field from the existing calibration point feature class that was chosen. | Field |
calibration_point_to_date_field (オプション) | The name of the to date field from the existing calibration point feature class that was chosen. | Field |
calibration_point_route_id_field (オプション) | The name of the route ID field from the existing calibration point feature class that was chosen. | Field |
calibration_point_network_id_field (オプション) | The name of the network ID field from the existing calibration point feature class that was chosen. | Field |
redline_feature_class (オプション) | An existing redline feature class for the minimum schema. | Feature Layer |
redline_from_measure_field (オプション) | The name of the from measure field from the existing redline feature class that was chosen. | Field |
redline_to_measure_field (オプション) | The name of the to measure field from the existing redline feature class that was chosen. | Field |
redline_route_id_field (オプション) | The name of the route ID field from the existing redline feature class that was chosen. | Field |
redline_route_name_field (オプション) | The name of the route name field from the existing redline feature class that was chosen. | Field |
redline_effective_date_field (オプション) | The name of the effective date field from the existing redline feature class that was chosen. | Field |
redline_activity_type_field (オプション) | The name of the activity type field from the existing redline feature class that was chosen. | Field |
redline_network_id_field (オプション) | The name of the network ID field from the existing redline feature class that was chosen. | Field |
conflict_prevention (オプション) | Specifies whether conflict prevention will be enabled for the input LRS. Conflict prevention is only available when editing or performing geoprocessing on branch versioned data that is published as a feature service.
| String |
派生した出力
名前 | 説明 | データ タイプ |
out_workspace | The updated LRS workspace string. | Workspace |
コードのサンプル
The following script demonstrates how to use the ModifyLRS function in the Python window.
# tool variables
input_workspace = r"c:\ModifyLRS\Py\ModifyLRS_python.gdb"
current_lrs_name = "LRS1"
new_lrs_name = "NewLRS"
centerline_feature_class = r"c:\ModifyLRS\Py\ModifyLRS_python.gdb\centerline1"
centerline_centerline_ID_field = "centerlineId"
centerline_sequence_table = r"c:\ModifyLRS\Py\ModifyLRS_python.gdb\centerline_Sequence1"
centerline_sequence_centerline_id_field = "centerlineId"
centerline_sequence_route_id_field = "RouteId"
centerline_sequence_from_date_field = "FromDate"
centerline_sequence_to_date_field = "ToDate"
centerline_sequence_network_ID_field = "NetworkId"
calibration_point_feature_class = r"c:\ModifyLRS\Py\ModifyLRS_python.gdb\calibration_Point1"
calibration_point_measure_field = "Measure"
calibration_point_from_date_field = "FromDate"
calibration_point_to_date_field = "ToDate"
calibration_point_route_id_field = "RouteId"
calibration_point_network_ID_field = "NetworkId"
redline_feature_class = r"c:\ModifyLRS\Py\ModifyLRS_python.gdb\Redline1"
redline_from_measure_field = "FromMeasure"
redline_to_measure_field = "ToMeasure"
redline_route_id_field = "RouteId"
redline_route_name_field = "RouteName"
redline_effective_date_field = "EffectiveDate"
redline_activity_type_field = "ActivityType"
redline_network_id_field = "NetworkId"
# set current workspace
arcpy.env.workspace = r"c:\ModifyLRS\Py\ModifyLRS_python.gdb"
# execute the tool
arcpy.ModifyLRS_locref(in_workspace, current_lrs_name, new_lrs_name, centerline_feature_class, centerline_centerline_id_field, centerline_sequence_table, centerline_sequence_centerline_id_field, centerline_sequence_route_id_field, centerline_sequence_from_date_field, centerline_sequence_to_date_field, centerline_sequence_network_id_field, calibration_point_feature_class, calibration_point_measure_field, calibration_point_from_date_field, calibration_point_to_date_field, calibration_point_route_id_field, calibration_point_network_id_field, redline_feature_class, redline_from_measure_field, redline_to_measure_field, redline_route_id_field, redline_route_name_field, redline_effective_date_field, redline_activity_type_field, redline_network_id_field)
The following script demonstrates how to use the ModifyLRS function in a stand-alone Python script.
# Name: Modify_LRS_ex2.py
# Description: Modifies existing LRS configuration based on the new parameters provided
# Requires: ArcGIS Pipeline Referencing
# Import arcpy module
import arcpy
# check out any necessary licenses
arcpy.CheckOutExtension("LocationReferencing")
# Local variables:
input_workspace = r"c:\ModifyLRS\Py\ModifyLRS_python.gdb"
current_lrs_name = "LRS1"
new_lrs_name = "NewLRS"
centerline_feature_class = r"c:\ModifyLRS\Py\ModifyLRS_python.gdb\centerline1"
centerline_centerline_ID_field = "centerlineId"
centerline_sequence_table = r"c:\ModifyLRS\Py\ModifyLRS_python.gdb\centerline_Sequence1"
centerline_sequence_centerline_id_field = "centerlineId"
centerline_sequence_route_id_field = "RouteId"
centerline_sequence_from_date_field = "FromDate"
centerline_sequence_to_date_field = "ToDate"
centerline_sequence_network_ID_field = "NetworkId"
calibration_point_feature_class = r"c:\ModifyLRS\Py\ModifyLRS_python.gdb\calibration_Point1"
calibration_point_measure_field = "Measure"
calibration_point_from_date_field = "FromDate"
calibration_point_to_date_field = "ToDate"
calibration_point_route_id_field = "RouteId"
calibration_point_network_ID_field = "NetworkId"
redline_feature_class = r"c:\ModifyLRS\Py\ModifyLRS_python.gdb\Redline1"
redline_from_measure_field = "FromMeasure"
redline_to_measure_field = "ToMeasure"
redline_route_id_field = "RouteId"
redline_route_name_field = "RouteName"
redline_effective_date_field = "EffectiveDate"
redline_activity_type_field = "ActivityType"
redline_network_id_field = "NetworkId"
# execute the tool
arcpy.ModifyLRS_locref(in_workspace, current_lrs_name, new_lrs_name, centerline_feature_class, centerline_centerline_id_field, centerline_sequence_table, centerline_sequence_centerline_id_field, centerline_sequence_route_id_field, centerline_sequence_from_date_field, centerline_sequence_to_date_field, centerline_sequence_network_id_field, calibration_point_feature_class, calibration_point_measure_field, calibration_point_from_date_field, calibration_point_to_date_field, calibration_point_route_id_field, calibration_point_network_id_field, redline_feature_class, redline_from_measure_field, redline_to_measure_field, redline_route_id_field, redline_route_name_field, redline_effective_date_field, redline_activity_type_field, redline_network_id_field)
ライセンス情報
- Basic: 次のものが必要 ArcGIS Location Referencing
- Standard: 次のものが必要 ArcGIS Location Referencing
- Advanced: 次のものが必要 ArcGIS Location Referencing