サマリー
Provides information about network attributes that are defined for a given network dataset.
説明
For a given network attribute, edgeDirectionX, sourceNameX, evaluatorTypeX, and dataX are dynamic properties where X indicates a particular evaluator. The possible range of values for X depends on the evaluatorCount property. For example, if a network attribute named DriveTime has two evaluators as indicated by the evaluatorCount property, the DriveTime attribute will support edgeDirection0, sourceName0, evaluatorType0, data0, edgeDirection1, sourceName1, evaluatorType1, and data1 properties.
Similarly, for a given network attribute, parameterNameX, parameterTypeX, and parameterDefaultValueX are dynamic properties where X indicates a particular parameter. The possible range of values for X depends on the parameterCount property. For example, if a network attribute named DriveTime has two parameters as indicated by the parameterCount property, the DriveTime attribute will support parameterName0, parameterType0, parameterDefaultValue0, parameterName1, parameterType1,and parameterDefaultValue1 properties.
プロパティ
| プロパティ | 説明 | データ タイプ |
| dataType (読み取り専用) | The network attribute data type. This property returns the following keywords:
| String |
| dataX (読み取り専用) | The value of the network attribute assigned to a network source using the evaluator. In case of a script evaluator, the entire expression is returned. The data type of the returned value depends on the data type and the evaluator type associated with the network attribute. dataX is a dynamic property. This property is not supported with SDC-based network datasets. | Variant |
| defaultEdgeData (読み取り専用) | The value for the network attribute that is associated by default with all the edge network sources in the network dataset. In case of a script evaluator, the entire expression is returned. The data type of the returned value depends on the data type and the default edge evaluator type associated with the network attribute. | Variant |
| defaultEdgeEvaluatorType (読み取り専用) | The default edge evaluator type used by the network dataset. This property returns the following keywords:
| String |
| defaultJunctionData (読み取り専用) | The value for the network attribute that is associated by default with all the junction network sources in the network dataset. In case of a script evaluator, the entire expression is returned. The data type of the returned value depends on the data type and the default junction evaluator type associated with the network attribute. | Variant |
| defaultJunctionEvaluatorType (読み取り専用) | The default junction evaluator type used by the network dataset. This property returns the following keywords:
| String |
| defaultTurnData (読み取り専用) | The value for the network attribute that is associated by default with all the turn network sources in the network dataset. In case of a script evaluator, the entire expression is returned. The property is available only if the network dataset supports turns that can be determined using the supportsTurns property. The data type of the returned value depends on the data type and the default turn evaluator type associated with the network attribute. | Variant |
| defaultTurnEvaluatorType (読み取り専用) | The network dataset default turn evaluator type. The property is available only if the network dataset supports turns that can be determined using the supportsTurns property. This property returns the following keywords:
| String |
| directions (読み取り専用) | A Network Directions Describe object that provides information about the network's directions configuration. If the network dataset does not support directions, this property will raise an exception. | Object |
| edgeDirectionX (読み取り専用) | The direction for the edge network sources along which the evaluator assigns the value for the network attribute. There is no direction associated with junction and turn network sources. edgeDirectionX is a dynamic property. This property returns the following keywords:
| String |
| evaluatorCount (読み取り専用) | The total number of evaluators used to derive values from the given network source for this network attribute. | Integer |
| evaluatorTypeX (読み取り専用) | The type of evaluator. evaluatorTypeX is a dynamic property. This property returns the following keywords:
| String |
| name (読み取り専用) | The name of the network attribute. | String |
| parameterCount (読み取り専用) | The total number of attribute parameters defined for the network attribute. | Integer |
| parameterDefaultValueX (読み取り専用) | The default value for the parameter. parameterDefaultValueX is a dynamic property that is supported only if the parameterCount value is greater than 0. The data type of the returned value depends on the data type of the attribute parameter. | Variant |
| parameterNameX (読み取り専用) | The name of the parameter. parameterNameX is a dynamic property that is supported only if the parameterCount value is greater than 0. | String |
| parameterTypeX (読み取り専用) | The data type for the parameter. parameterTypeX is a dynamic property that is supported only if the parameterCount value is greater than 0. This property returns the following keywords:
| String |
| parameterUsageTypeX (読み取り専用) | The usage type for the parameter. This property returns the following keywords:
parameterUsageTypeX is a dynamic property that is supported only if the parameterCount value is greater than 0. | String |
| sourceNameX (読み取り専用) | The name of the network source for which the evaluator calculates the value of a given network attribute. sourceNameX is a dynamic property. | String |
| trafficSupportType (読み取り専用) | The type of traffic data currently configured for the network attribute. This property returns the following keywords:
| String |
| units (読み取り専用) | The units for the network attribute. Units of a cost attribute are either distance or time units, for example, centimeters, meters, miles, minutes, seconds. Descriptors, hierarchies, and restrictions have unknown units. | String |
| usageType (読み取り専用) | The network attribute usage type. This property returns the following keywords:
| String |
| useByDefault (読み取り専用) | Indicates if the network attribute is used by default on a newly created network analysis layer. Only one cost attribute in the network dataset can be set to be used by default. Descriptor attributes cannot be used by default. | Boolean |
コードのサンプル
Display the network attribute information for a network dataset.
# Name: NDSAttributeProperties_ex01.py
# Description: Print the information about network attributes defined for the
# network dataset
import arcpy
# Set workspace
arcpy.env.workspace = "C:/Data/Paris.gdb/Transportation"
# Create a Describe object from the network dataset
desc = arcpy.Describe("ParisMultimodal_ND")
# Get a list of network attributes
attributes = desc.attributes
#print information for each attribute
for attribute in attributes:
print("----------------------------------\n")
print("Name: ", attribute.name)
print("Units: ", attribute.units)
print("Usage Type: ", attribute.usageType)
print("Data Type: ", attribute.dataType)
print("Use By Default: ", str(attribute.useByDefault))
#Information about default evaluators
print("Default edge evaluator type: ", attribute.defaultEdgeEvaluatorType)
print("Default edge evaluator data: ", str(attribute.defaultEdgeData))
print("Default junction evaluator type: ",attribute.defaultJunctionEvaluatorType)
print("Default junction evaluator data: ",str(attribute.defaultJunctionData))
#Turn specific information is supported only if network dataset supports
#turns
if desc.supportsTurns:
print("Default turn evaluator type: ",attribute.defaultTurnEvaluatorType)
print("Default turn evaluator data: ", str(attribute.defaultTurnData))
#Describe all other evaluators
count = attribute.evaluatorCount
print("Evaluator count: ", count)
for i in range(0, count):
text = "Evaluator %d" % i
print(text, " ---")
edgeDir = getattr(attribute,"edgeDirection" + str(i))
print("Edge direction: ", edgeDir)
srcName = getattr(attribute,"sourceName" + str(i))
print("Source Name: ", srcName)
evaluatortype = getattr(attribute,"evaluatorType" + str(i))
evaluatordata = getattr(attribute,"data" + str(i))
print("Evaluator Type: ", evaluatortype)
print("Evaluator Data: ", evaluatordata)
#Describe attribute parameters
print("Parameter Information........")
paramcount = attribute.parameterCount
if paramcount == 0:
print("No Parameters defined.")
else:
print("Parameter Count: ", paramcount)
for i in range (0, paramcount):
paramName = getattr(attribute, "parameterName" + str(i))
paramType = getattr(attribute, "parameterType" + str(i))
paramDefaultValue = getattr(attribute, "parameterDefaultValue" + str(i))
print("Parameter Name: ", paramName)
print("Parameter Type: ", paramType)
print("Parameter Default Value: ", paramDefaultValue)