ICAO Annex 4 (Aviation)

Aviation Airports ライセンスで利用できます。

Aviation Charting ライセンスで利用できます。

サマリー

Creates obstruction identification surfaces (OIS) based on the ICAO Annex 4 specification for the Precision Approach Terrain chart.

These surfaces are designed to aid in the analysis of the terrain and features within a defined portion of the final approach that is depicted on the Precision Approach Terrain chart type. To generate the surfaces, a runway centerline is needed as a reference for the surfaces. This tool generates the surfaces as polygon or multipatch features.

使用法

• [入力滑走路フィーチャ] パラメーターは、Z 対応である必要があります。

• The Target OIS Features parameter must be z-enabled.

• If a feature class is selected in Target OIS Features, it must have a vertical spatial reference.

• OIS tools are flexible and accept a variety of input and output feature class types. For more information, see the OIS Input and Output schemas.

• The Input Airport Control Point Feature parameter can be used to supply x-, y-, and z-geometry for displaced threshold features. If displaced thresholds are included, surfaces will be constructed based on their x-, y-, and z-geometry instead of their corresponding runway feature endpoint.

パラメーター

ダイアログ

ラベル	説明	データ タイプ
Input Runway Features	The input runway dataset. The feature class must be z-enabled and contain polylines.	Feature Layer
Target OIS Features	The target feature class that will contain the generated obstruction identification surfaces.	Feature Layer
Runway Direction (オプション)	Specifies at which end of the runway the approach surface will be created. High end to low end—The approach surface will be created at the high end of the runway to the low end. If a displaced threshold point exists at the high end of the runway, that point will be honored when creating the OIS. Low end to high end—The approach surface will be created at the low end of the runway to the high end. If a displaced threshold point exists at the low end of the runway, that point will be honored when creating the OIS.	String
Length (オプション)	The length of the surface in meters. The default value is 900.	Double
Width (オプション)	The width of the surface in meters. The default value is 120.	Double
Slope (オプション)	The slope of the surface in degrees. The default value is 3.	Double
Start Height (オプション)	The start height of the surface in meters. The default value is 15.24.	Double
Input Airport Control Point Feature (オプション)	Supplies x-, y-, and z-geometry for displaced threshold features. If displaced thresholds are included, surfaces will be constructed based on their x-, y-, and z-geometry instead of their corresponding runway feature endpoint.	Feature Layer

派生した出力

ラベル	説明	データ タイプ
Output OIS Features	The updated feature class containing the generated obstruction identification surfaces.	Feature Layer

Python

arcpy.aviation.ICAOAnnex4(in_features, target, {runway_direction}, {length}, {width}, {slope}, {height}, {airport_control_point_feature_class})

名前	説明	データ タイプ
in_features	The input runway dataset. The feature class must be z-enabled and contain polylines.	Feature Layer
target	The target feature class that will contain the generated obstruction identification surfaces.	Feature Layer
runway_direction (オプション)	Specifies at which end of the runway the approach surface will be created. HIGH_END_TO_LOW_END—The approach surface will be created at the high end of the runway to the low end. If a displaced threshold point exists at the high end of the runway, that point will be honored when creating the OIS. LOW_END_TO_HIGH_END—The approach surface will be created at the low end of the runway to the high end. If a displaced threshold point exists at the low end of the runway, that point will be honored when creating the OIS.	String
length (オプション)	The length of the surface in meters. The default value is 900.	Double
width (オプション)	The width of the surface in meters. The default value is 120.	Double
slope (オプション)	The slope of the surface in degrees. The default value is 3.	Double
height (オプション)	The start height of the surface in meters. The default value is 15.24.	Double
airport_control_point_feature_class (オプション)	Supplies x-, y-, and z-geometry for displaced threshold features. If displaced thresholds are included, surfaces will be constructed based on their x-, y-, and z-geometry instead of their corresponding runway feature endpoint.	Feature Layer

派生した出力

名前	説明	データ タイプ
derived_outfeatureclass	The updated feature class containing the generated obstruction identification surfaces.	Feature Layer

コードのサンプル

ICAOAnnex4 example (Python window)

The following Python window script demonstrates how to use the ICAOAnnex4 tool.

import arcpy

# set gp environment
arcpy.env.workspace = "c:/data/ois.gdb"
arcpy.CheckOutExtension("Airports")

# Input Runway Feature Class
inFeatures = "RunwayCenterline"

# feature class that will contain the OIS surface
outFeatureClass = "ObstructionIdSurface"

# runway variables
runwayDir = "HIGH_END_TO_LOW_END"
length = 900
width = 120
slope = 3
start_height = 15.24

#_Exec_ICAOAnnex4
arcpy.ICAOAnnex4_aviation(inFeatures, outFeatureClass, runwayDir, length, width, slope, start_height)

arcpy.CheckInExtension("Airports")

環境

現在のワークスペース

特殊なケース

ライセンス情報

• Basic: No
• Standard: 次のものが必要 Airports, ArcGIS Aviation Charting
• Advanced: No