FAA 13A (Aviation)

Aviation Airports ライセンスで利用できます。

Aviation Charting ライセンスで利用できます。

サマリー

Creates obstruction identification surfaces (OIS) based on the FAA Advisory Circular 150/5300-13A specification. These approach and departure surfaces are designed to protect the use of the runway in both visual and instrument meteorological conditions near the airport and are used to support planning and design activities. The type, function, and dimension of a surface differ by its runway classification. This tool creates surfaces as a polygon or multipatch features.

使用法

  • [入力滑走路フィーチャ] パラメーターは、Z 対応である必要があります。

  • This tool creates the OIS in an existing polygon or multipatch feature class. It can also be generated in an existing polygon shapefile. If a feature class is selected for Target OIS Features, it must have a vertical spatial reference.

  • To create a JSON file for Custom JSON File, use the CustomizeOIS.exe file that is part of the ArcGIS Aviation data package available from My Esri.

  • OIS tools are flexible and accept a variety of input and output feature class types. For more information, see the OIS Input and Output schemas.

  • A departure runway classification can include a clearway surface. Clearway length, slope, width, and negative offset distance must be provided in the Custom JSON File parameter.

  • The Input Airport Control Point Feature parameter can be used to supply x-, y-, and z-geometry for displaced threshold features. If displaced thresholds are included, surfaces will be constructed based on their x-, y-, and z-geometry instead of their corresponding runway feature endpoint.

パラメーター

ラベル説明データ タイプ
Input Runway Features

The input runway dataset. The feature class must be z-enabled and contain polylines.

Feature Layer
Target OIS Features

The target feature class that will contain the generated OIS.

Feature Layer
Runway Classification

Specifies the classification of the runway.

  • Small airplanes approach speeds less than 50 knotsApproach end of runways are expected to serve small airplanes with approach speeds less than 50 knots. This applies to visual runways only, day or night.
  • Small airplanes approach speeds 50 knots or moreApproach end of runways are expected to serve small airplanes with approach speeds of 50 knots or more. This applies to visual runways only, day or night.
  • Large airplanes for visual runways only, day or nightApproach end of runway are expected to serve large airplanes. This applies to visual runways only, day or night.
  • Instrument approach visibility greater than or equal to 3/4 mile Approach end of runways are expected to accommodate instrument approaches having visibility greater than or equal to 3/4 statute mile.
  • Instrument approach less than 3/4 mile visibilityApproach end of runways are expected to accommodate instrument approaches having visibility minimums less than 3/4 statute mile.
  • Vertical guidance approachApproach end of runways are expected to accommodate instrument approaches with vertical guidance.
  • Departure Departure runway ends are used for any instrument operations.
String
Length of High Runway End Clearway
(オプション)
レガシー:

This parameter is no longer supported. It is still included in the tool's syntax for compatibility in scripts and models but is hidden on the tool dialog box.

Double
Length of Low Runway End Clearway
(オプション)
レガシー:

This parameter is no longer supported. It is still included in the tool's syntax for compatibility in scripts and models but is hidden on the tool dialog box.

Double
Custom JSON File
(オプション)

The import configuration, in JSON format, that creates the custom OIS.

File
Generate Clearway
(オプション)

Specifies whether a clearway surface will be generated for departure runways.

  • Checked—A clearway surface will be generated.
  • Unchecked—A clearway surface will not be generated. This is the default.
Boolean
Input Airport Control Point Feature
(オプション)

Supplies x-, y-, and z-geometry for displaced threshold features. If displaced thresholds are included, surfaces will be constructed based on their x-, y-, and z-geometry instead of their corresponding runway feature endpoint.

Feature Layer

派生した出力

ラベル説明データ タイプ
Output OIS Features

The updated feature class containing the generated OIS.

Feature Layer

arcpy.aviation.FAA13A(in_features, target, runway_type, {highend_clear_way_length}, {lowend_clear_way_length}, {custom_json_file}, {generate_clearway_surface}, {airport_control_point_feature_class})
名前説明データ タイプ
in_features

The input runway dataset. The feature class must be z-enabled and contain polylines.

Feature Layer
target

The target feature class that will contain the generated OIS.

Feature Layer
runway_type

Specifies the classification of the runway.

  • SMALL_AIRPLANE_APPROACH_SPEEDS_LT_50Approach end of runways are expected to serve small airplanes with approach speeds less than 50 knots. This applies to visual runways only, day or night.
  • SMALL_AIRPLANE_APPROACH_SPEEDS_GT_50Approach end of runways are expected to serve small airplanes with approach speeds of 50 knots or more. This applies to visual runways only, day or night.
  • LARGE_AIRPLANE_VISUAL_RUNWAY_DAY_NIGHTApproach end of runway are expected to serve large airplanes. This applies to visual runways only, day or night.
  • INSTRUMENT_GT_EQ_3/4_MILE Approach end of runways are expected to accommodate instrument approaches having visibility greater than or equal to 3/4 statute mile.
  • INSTRUMENT_LT_3/4_MILE_VISIBILITYApproach end of runways are expected to accommodate instrument approaches having visibility minimums less than 3/4 statute mile.
  • VERTICAL_GUIDANCE_APPROACHApproach end of runways are expected to accommodate instrument approaches with vertical guidance.
  • DEPARTURE Departure runway ends are used for any instrument operations.
String
highend_clear_way_length
(オプション)
レガシー:

This parameter is no longer supported. It is still included in the tool's syntax for compatibility in scripts and models but is hidden on the tool dialog box.

Double
lowend_clear_way_length
(オプション)
レガシー:

This parameter is no longer supported. It is still included in the tool's syntax for compatibility in scripts and models but is hidden on the tool dialog box.

Double
custom_json_file
(オプション)

The import configuration, in JSON format, that creates the custom OIS.

File
generate_clearway_surface
(オプション)

Specifies whether a clearway surface will be generated for departure runways.

  • GENERATE_CLEARWAY_SURFACEA clearway surface will be generated.
  • NOT_GENERATE_CLEARWAY_SURFACE A clearway surface will not be generated. This is the default.
Boolean
airport_control_point_feature_class
(オプション)

Supplies x-, y-, and z-geometry for displaced threshold features. If displaced thresholds are included, surfaces will be constructed based on their x-, y-, and z-geometry instead of their corresponding runway feature endpoint.

Feature Layer

派生した出力

名前説明データ タイプ
derived_outfeatureclass

The updated feature class containing the generated OIS.

Feature Layer

コードのサンプル

FAA13A example 1 (stand-alone script)

The following Python window script demonstrates how to use the FAA13A function.

import arcpy

# set gp environment
arcpy.CheckOutExtension("Aeronautical")

# Input Runway Feature Class
inFeatures = r"C:\data\ois.gdb\RunwayCenterline"

# Feature class that will contain the OIS surface
outFeatures = r"C:\data\ois.gdb\ObstructionIdSurface"

# Airport variables
runway = "SMALL_AIRPLANES_APPROACH_SPEEDS_LT_50"

# Generate FAA13A OIS
arcpy.FAA13A_aviation(inFeatures, outFeatures, runway)

arcpy.CheckInExtension("Aeronautical")
FAA13A example 2 (stand-alone script)

The following Python window script demonstrates how to use the FAA13A function with the custom_json_file parameter.

import arcpy

# set gp environment
arcpy.CheckOutExtension("Aeronautical")

# Input Runway Feature Class
inFeatures = r"C:\data\ois.gdb\RunwayCenterline"

# Feature class that will contain the OIS surface
outFeatures= r"C:\data\ois.gdb\ObstructionIdSurface"

# Airport variables
runway = "DEPARTURE"
hiEndClearWay = 0  # parameter is disregarded for FAA13A, set Clearway dimension in Custom JSON
lowEndClearWay = 0 # parameter is disregarded for FAA13A, set Clearway dimension in Custom JSON
customJSON = r"C:\data\customOIS.json"
Clearway_Surface = “GENERATE_CLEARWAY_SURFACE”

# Generate FAA13A OIS
arcpy.FAA13A_aviation(inFeatures, outFeatures, runway, hiEndClearWay,
                      lowEndClearWay, customJSON, Clearway_Surface)

arcpy.CheckInExtension("Aeronautical")

環境

特殊なケース

ライセンス情報

  • Basic: No
  • Standard: 次のものが必要 Airports, ArcGIS Aviation Charting
  • Advanced: No

関連トピック