FAA 13A Runway Protection Surfaces (Aviation)

Aviation Airports ライセンスで利用できます。

Aviation Charting ライセンスで利用できます。

サマリー

Generates runway protection surfaces based on FAA Advisory Circular 150/5300-13A.

Safe and efficient landing and takeoff operations at an airport require that certain areas on and near the airport are clear of objects or restricted to objects with a certain function, composition, or height. These clearing standards and criteria are established to create a safer environment for the aircraft operating on or near the airport.

レガシー:

This is a deprecated tool. This functionality has been replaced by the FAA 13 Runway Protection Surfaces tool that generates runway protection surfaces based on FAA Advisory Circular AC 150/5300-13B.

使用法

  • This tool generates runway protection surfaces based on design matrices defined by the FAA. A design matrix consists of an approach category and approach design group. You can choose the design matrix to use for the surfaces by setting the Approach Category and Approach Design Group parameters.

    Some design matrices only apply to aircraft under 12,500 pounds. You can use the Small Aircraft parameter to specify the design matrix for a small aircraft.

  • The Input Runway Features parameter value must be z-enabled.

  • The Target OIS Features parameter value must be z-enabled.

  • This tool creates the runway protection area surface in an existing polygon or multipatch feature class. If a feature class is used for the Target OIS Features parameter value, it must have a vertical spatial reference. It should have Name and Description text attributes, which will be populated in the output features. Suitable Target OIS Features parameter values can be the following feature classes from the Airports 18B schema (Airports18B_NAD83_GX.xml): Airspace\ObstructionIdSurface, ObstructionIdSurface_MP, or RunwayProtectArea.

  • If the Runway End Features parameter is specified, the corresponding field values in this layer will override the values specified in the Approach Category, Aircraft Design Group, and Approach Guidance parameters. This is useful for providing specific input per runway end. The Airfield\RunwayEnd feature class is suitable input for this parameter with the following fields populated: Approach Category, Approach Guidance, and Design Group.

  • The high end of the runway refers to runway direction identifiers 19 through 36. The low end of the runway refers to runway direction identifiers 01 through 18.

  • To create a .json file for the Custom JSON File parameter, use the CustomizeOIS.exe utility included in the Aviation Airports Product Data download available from My Esri.

パラメーター

ラベル説明データ タイプ
Input Runway Features

The input runway dataset. The feature class must be z-enabled and contain polylines.

Feature Layer
Target OIS Features

The target feature class that will contain the generated OIS.

Feature Layer
Surface Generation
(オプション)

Specifies the type of surface that will be generated.

  • Runway Safety AreaA runway safety area (RSA) will be generated.
  • Runway Object Free AreaA runway object free area (ROFA) will be generated.
  • Runway Obstacle Free ZoneA runway obstacle free zone (ROFZ) will be generated.
  • Precision Obstacle Free ZoneA precision obstacle free zone (POFZ) will be generated.
  • Approach Runway Protection ZoneAn approach runway protection zone (RPZ) will be generated.
  • Departure Runway Protection ZoneA departure runway protection zone (RPZ) will be generated.
String
Visibility Minimums

Specifies the visibility minimums that will be used for the runways.

  • VisualVisual flight rules will be used.
  • Not lower than 1 mileVisibility minimums will not be lower than 1 mile.
  • Not lower than 3/4 mileVisibility minimums will not be lower than 3/4 mile.
  • Lower than 3/4 mileVisibility minimums will be lower than 3/4 mile.
String
Approach Category

Specifies the approach category that will be used to generate surfaces.

  • AApproach category A will be used.
  • BApproach category B will be used.
  • CApproach category C will be used.
  • DApproach category D will be used.
  • EApproach category E will be used.
String
Aircraft Design Group

Specifies the approach design group that will be used to generate surfaces.

  • IApproach design group I will be used.
  • IIApproach design group II will be used.
  • IIIApproach design group III will be used.
  • IVApproach design group IV will be used.
  • VApproach design group V will be used.
  • VIApproach design group VI will be used.
String
Small Aircraft
(オプション)

Specifies whether surfaces will be generated with the small aircraft design matrix.

注意:

This parameter only applies when the Approach Category parameter is set to A or B.

  • Checked—Surfaces will be generated with the small aircraft design matrix.
  • Unchecked—Surfaces will not be generated with the small aircraft design matrix. This is the default.
Boolean
Approach Guidance
(オプション)

Specifies the type of approach guidance that will be used at the end of the runway.

  • Precision Category IPrecision Category I approach operations will be used for the runway.
  • Precision Category IIPrecision Category II approach operations will be used for the runway.
  • Precision Category III APrecision Category III A approach operations will be used for the runway.
  • Precision Category III BPrecision Category III B approach operations will be used for the runway.
  • Precision Category III CPrecision Category III C approach operations will be used for the runway.
  • Precision Category III DPrecision Category III D approach operations will be used for the runway.
  • Non-verticalNonvertical approach operations (nonprecision approach category) will be used for the runway.
  • VerticalVertically guided approach operations will be used for the runway.
  • VisualOnly visual approach operations will be used for the runway.
String
Runway Direction
(オプション)

Specifies the end of the runway where the approach surface will be created.

  • High end to low endThe approach surface will be created from the high end of the runway to the low end. If a displaced threshold point exists at the high end of the runway, that point will be honored when creating the OIS.
  • Low end to high endThe approach surface will be created from the low end of the runway to the high end. If a displaced threshold point exists at the low end of the runway, that point will be honored when creating the OIS.
  • Both endsThe approach surface will be created from both the low end and high end of the runway.
String
Airport Elevation
(オプション)

The highest elevation on any of the runways of the airport. The value should be in the vertical coordinate system linear units of the target feature class. If no value is provided, the highest point from the Input Runway Features parameter value will be used.

Double
Input Airport Control Point Feature
(オプション)

The point features containing an Airport Elevation parameter feature, displaced threshold features, or both. Values provided for the Airport Elevation parameter will take precedence over these point features.

Feature Layer
Runway End Features
(オプション)

The input runway end point features associated with each runway. The corresponding field values in this layer will override the values specified in the Approach Category, Aircraft Design Group, and Approach Guidance parameters.

Feature Layer
Last Low End Approach Light
(オプション)

The distance in feet of the Approach Lighting System (ALS) from the end of the low end of the runway. If no value is provided, it is assumed that there is no ALS at the low end of the runway.

Double
Last High End Approach Light
(オプション)

The distance in feet of the Approach Lighting System (ALS) from the end of the high end of the runway. If no value is provided, it is assumed that there is no ALS at the high end of the runway.

Double
Custom JSON File
(オプション)

The import configuration, in JSON format, that will be used to create the custom obstruction identification surface (OIS).

File

派生した出力

ラベル説明データ タイプ
Output OIS Features

The output obstruction identification surface (OIS) features.

Feature Layer

arcpy.aviation.FAA13ARunwayProtectionSurfaces(in_features, target, {surface_generation}, visibility_minimums, approach_category, approach_design_group, {small_aircraft}, {approach_guidance}, {runway_direction}, {airport_elevation}, {airport_control_point_feature_class}, {runway_end_features}, {last_low_light}, {last_high_light}, {custom_json_file})
名前説明データ タイプ
in_features

The input runway dataset. The feature class must be z-enabled and contain polylines.

Feature Layer
target

The target feature class that will contain the generated OIS.

Feature Layer
surface_generation
[surface_generation,...]
(オプション)

Specifies the type of surface that will be generated.

  • RUNWAY_SAFETY_AREAA runway safety area (RSA) will be generated.
  • RUNWAY_OBJECT_FREE_AREAA runway object free area (ROFA) will be generated.
  • RUNWAY_OBSTACLE_FREE_ZONEA runway obstacle free zone (ROFZ) will be generated.
  • PRECISION_OBSTACLE_FREE_ZONEA precision obstacle free zone (POFZ) will be generated.
  • APPROACH_RUNWAY_PROTECTION_ZONEAn approach runway protection zone (RPZ) will be generated.
  • DEPARTURE_RUNWAY_PROTECTION_ZONEA departure runway protection zone (RPZ) will be generated.
String
visibility_minimums

Specifies the visibility minimums that will be used for the runways.

  • VISUALVisual flight rules will be used.
  • NOT_LOWER_THAN_1_MILEVisibility minimums will not be lower than 1 mile.
  • NOT_LOWER_THAN_3_4_MILEVisibility minimums will not be lower than 3/4 mile.
  • LOWER_THAN_3_4_MILEVisibility minimums will be lower than 3/4 mile.
String
approach_category

Specifies the approach category that will be used to generate surfaces.

  • AApproach category A will be used.
  • BApproach category B will be used.
  • CApproach category C will be used.
  • DApproach category D will be used.
  • EApproach category E will be used.
String
approach_design_group

Specifies the approach design group that will be used to generate surfaces.

  • IApproach design group I will be used.
  • IIApproach design group II will be used.
  • IIIApproach design group III will be used.
  • IVApproach design group IV will be used.
  • VApproach design group V will be used.
  • VIApproach design group VI will be used.
String
small_aircraft
(オプション)

Specifies whether surfaces will be generated with the small aircraft design matrix.

注意:

This parameter only applies when the approach_category parameter is set to A or B.

  • SMALL_AIRCRAFTSurfaces will be generated with the small aircraft design matrix.
  • NOT_SMALL_AIRCRAFTSurfaces will not be generated with the small aircraft design matrix. This is the default.
Boolean
approach_guidance
(オプション)

Specifies the type of approach guidance that will be used at the end of the runway.

  • PRECISION_CAT_IPrecision Category I approach operations will be used for the runway.
  • PRECISION_CAT_IIPrecision Category II approach operations will be used for the runway.
  • PRECISION_CAT_IIIAPrecision Category III A approach operations will be used for the runway.
  • PRECISION_CAT_IIIBPrecision Category III B approach operations will be used for the runway.
  • PRECISION_CAT_IIICPrecision Category III C approach operations will be used for the runway.
  • PRECISION_CAT_IIIDPrecision Category III D approach operations will be used for the runway.
  • NON_VERTICALNonvertical approach operations (nonprecision approach category) will be used for the runway.
  • VERTICALVertically guided approach operations will be used for the runway.
  • VISUALOnly visual approach operations will be used for the runway.
String
runway_direction
(オプション)

Specifies the end of the runway where the approach surface will be created.

  • HIGH_END_TO_LOW_ENDThe approach surface will be created from the high end of the runway to the low end. If a displaced threshold point exists at the high end of the runway, that point will be honored when creating the OIS.
  • LOW_END_TO_HIGH_ENDThe approach surface will be created from the low end of the runway to the high end. If a displaced threshold point exists at the low end of the runway, that point will be honored when creating the OIS.
  • BOTH_ENDThe approach surface will be created from both the low end and high end of the runway.
String
airport_elevation
(オプション)

The highest elevation on any of the runways of the airport. The value should be in the vertical coordinate system linear units of the target feature class. If no value is provided, the highest point from the in_features parameter value will be used.

Double
airport_control_point_feature_class
(オプション)

The point features containing an airport_elevation parameter feature, displaced threshold features, or both. Values provided for the airport_elevation parameter will take precedence over these point features.

Feature Layer
runway_end_features
(オプション)

The input runway end point features associated with each runway. The corresponding field values in this layer will override the values specified in the approach_category, approach_design_group, and approach_guidance parameters.

Feature Layer
last_low_light
(オプション)

The distance in feet of the Approach Lighting System (ALS) from the end of the low end of the runway. If no value is provided, it is assumed that there is no ALS at the low end of the runway.

Double
last_high_light
(オプション)

The distance in feet of the Approach Lighting System (ALS) from the end of the high end of the runway. If no value is provided, it is assumed that there is no ALS at the high end of the runway.

Double
custom_json_file
(オプション)

The import configuration, in JSON format, that will be used to create the custom obstruction identification surface (OIS).

File

派生した出力

名前説明データ タイプ
derived_outfeatureclass

The output obstruction identification surface (OIS) features.

Feature Layer

コードのサンプル

FAA13ARunwayProtectionSurfaces example (stand-alone script)

The following stand-alone script demonstrates how to use the FAA13ARunwayProtectionSurfaces function.

import arcpy

arcpy.CheckOutExtension("Aeronautical")

arcpy.env.workspace = "D:/data.gdb"

in_features = "RunwayCenterline"
target = "ObstructionIdSurface_MP"
surface_generation = ["RUNWAY_SAFETY_AREA", "RUNWAY_OBSTACLE_FREE_AREA"]
visibility_minimums = "VISUAL"
approach_category = "A"
approach_design_group = "I"
small_aircraft = True
approach_guidance = "VISUAL"
runway_direction = "BOTH_END"
airport_elevation = 97.2
airport_control_point_feature_class = "AirportControlPoint"
runway_end_features = "RunwayEndPoints"
last_low_light = 0.0
last_high_light = 0.0
custom_json_file = "D:/config.json"

arcpy.aviation.FAA13ARunwayProtectionSurfaces(in_features, target, visibility_minimums, approach_category, 
                                              approach_design_group, small_aircraft, approach_guidance, 
                                              runway_direction, airport_elevation, airport_control_point_feature_class, 
                                              runway_end_features, last_low_light, last_high_light, custom_json_file)

arcpy.CheckInExtension("Aeronautical")

環境

このツールは、ジオプロセシング環境を使用しません。

ライセンス情報

  • Basic: No
  • Standard: 次のものが必要 Airports or ArcGIS Aviation Charting
  • Advanced: 次のものが必要 Airports or ArcGIS Aviation Charting