Near (Analysis)

Summary

Calculates distance and additional proximity information between the input features and the closest feature in another layer or feature class.

Learn more about how proximity is calculated in geoprocessing tools

Illustration

Finding near feature by geometry type

Usage

  • The following fields will be added to the input. If the fields already exist, the field values will be updated. These field names can be configured using the Field Names (field_names) parameter.

    • NEAR_FID—The ObjectID of the closest near feature. If no near feature is found, the value will be -1.
    • NEAR_DIST—The distance between the input and near feature. The value is in the linear unit of the input features coordinate system or meters when the Method parameter is set to Geodesic and the input is in a geographic coordinate system. If no near feature is found, the value will be -1.
    • NEAR_FC—The catalog path to the feature class that contains the near feature. This field is only added to the output table if multiple near features are specified. If no near feature is found, the value will be empty string or null.

    The following fields will be added to the input features if the Location parameter is checked (location parameter is set to LOCATION in Python). The field values are updated if the fields already exist. The field value units depend on the method selected for the Method parameter. If it's set to Planar, the value is in the linear unit of the input feature's coordinate system. If it's set to Geodesic, the value is in the geographic coordinate system associated with the input feature's coordinate system.

    • NEAR_X—The x-coordinate of the location on the near feature that is closest to the input feature. If no near feature is found, the value will be -1.
    • NEAR_Y—The y-coordinate of the location on the near feature that is closest to the input feature. If no near feature is found, the value will be -1.

    The following field will be added to the input features if the Angle parameter is checked (angle parameter is set to ANGLE in Python). The field values are updated if the fields already exist.

    • NEAR_ANGLE—The angle of the line at the FROM_X and FROM_Y location that connects the input features to the near feature. If no near feature is found or the near feature intersects the input feature, the value will be 0.

  • The values for NEAR_FID and NEAR_DIST will be -1 if no feature is found within the search radius.

  • Both input features and near features can be point, multipoint, line, or polygon.

  • The Near Features can include one or more feature classes of different shape types (point, multipoint, line, or polygon).

  • The same feature class or layer can be used as both input and near features. In this situation, the input feature being evaluated is excluded from the near feature candidates to avoid all features being closest to themselves.

  • The input features can be a layer on which you have performed a selection. The selected features will be used and updated during the execution of the tool. The remaining features will have the values of the newly created fields (such as NEAR_FID and NEAR_DIST) set to -1.

  • When more than one near feature has the same shortest distance from an input feature, one of them is randomly chosen as the nearest feature.

  • When using the Planar option for the Method parameter, the input features must be in a projection that is appropriate for distance measurement, such as an equidistant projection.

    Learn more about coordinate systems and projections.

  • To visualize the FROM_X, FROM_Y, NEAR_X, and NEAR_Y locations, the output table can be used as input to the Make XY Event Layer or XY To Line tool.

Parameters

LabelExplanationData Type
Input Features

The input features that can be point, polyline, polygon, or multipoint type.

Feature Layer
Near Features

One or more feature layers or feature classes containing near feature candidates. The near features can be point, polyline, polygon, or multipoint. If multiple layers or feature classes are specified, the NEAR_FC field is added to the input table and will store the paths of the source feature class containing the nearest feature found. The same feature class or layer can be used as both input and near features.

Feature Layer
Search Radius
(Optional)

The radius used to search for near features. If no value is specified, all near features are considered. If a distance but no unit or unknown is specified, the units of the coordinate system of the input features are used. If the Geodesic option is used for the Method parameter, use a linear unit such as kilometers or miles.

Linear Unit
Location
(Optional)

Specifies whether x- and y-coordinates of the closest location of the near feature will be written to the NEAR_X and NEAR_Y fields.

  • Unchecked—Locations will not be written. This is the default.
  • Checked—Locations will be written.
Boolean
Angle
(Optional)

Specifies whether the near angle will be calculated and written to a NEAR_ANGLE field in the output table. A near angle measures direction of the line connecting an input feature to its nearest feature at their closest location. When the Planar method is used in the Method parameter, the angle is within the range of -180° to 180°, with 0° to the east, 90° to the north, 180° (or -180°) to the west, and -90° to the south. When the Geodesic method is used, the angle is within the range of -180° to 180°, with 0° to the north, 90° to the east, 180° (or -180°) to the south, and -90° to the west.

  • Unchecked—The NEAR_ANGLE field will not be added. This is the default.
  • Checked—The NEAR_ANGLE field will be added.
Boolean
Method
(Optional)

Specifies whether a shortest path will be used on a spheroid (geodesic) or a flat earth (planar) method. It is recommended that you use the Geodesic method with data stored in a coordinate system that is not appropriate for distance measurements (for example, Web Mercator or any geographic coordinate system) and any analysis that spans a large geographic area.

  • PlanarPlanar distances will be used between the features. This is the default.
  • GeodesicGeodesic distances will be used between features. This method takes into account the curvature of the spheroid and correctly deals with data near the dateline and poles.
String
Field Names
(Optional)

Specifies the names of the attribute fields that will be added during processing.

If this parameter is not used or any fields that will be added are excluded from this parameter, the default field names will be used.

By default, NEAR_FID and NEAR_DIST fields will always be added, NEAR_X and NEAR_Y fields will be added when the Location parameter (location in Python) is enabled, the NEAR_ANGLE field will be added when the Angle parameter (angle in Python) is enabled, and the NEAR_FC field will be added when multiple inputs are used.

Value Table

Derived Output

LabelExplanationData Type
Updated Input Features

The updated input features.

Feature Layer

arcpy.analysis.Near(in_features, near_features, {search_radius}, {location}, {angle}, {method}, {field_names})
NameExplanationData Type
in_features

The input features that can be point, polyline, polygon, or multipoint type.

Feature Layer
near_features
[near_features,...]

One or more feature layers or feature classes containing near feature candidates. The near features can be point, polyline, polygon, or multipoint. If multiple layers or feature classes are specified, the NEAR_FC field is added to the input table and will store the paths of the source feature class containing the nearest feature found. The same feature class or layer can be used as both input and near features.

Feature Layer
search_radius
(Optional)

The radius used to search for near features. If no value is specified, all near features are considered. If a distance but no unit or unknown is specified, the units of the coordinate system of the input features are used. If the GEODESIC option is used for the method parameter in Python), use a linear unit such as kilometers or miles.

Linear Unit
location
(Optional)

Specifies whether x- and y-coordinates of the closest location of the near feature will be written to the NEAR_X and NEAR_Y fields.

  • NO_LOCATION Location information will not be written. This is the default.
  • LOCATION Location information will be written.
Boolean
angle
(Optional)

Specifies whether the near angle will be calculated and written to a NEAR_ANGLE field in the output table. A near angle measures direction of the line connecting an input feature to its nearest feature at their closest locations. When the PLANAR method is used in the method parameter, the angle is within the range of -180° to 180°, with 0° to the east, 90° to the north, 180° (or -180°) to the west, and -90° to the south. When the GEODESIC method is used, the angle is within the range of -180° to 180°, with 0° to the north, 90° to the east, 180° (or -180°) to the south, and -90° to the west.

  • NO_ANGLEThe near angle values will not be written. This is the default.
  • ANGLEThe near angle values will be written to the NEAR_ANGLE field.
Boolean
method
(Optional)

Specifies whether a shortest path will be used on a spheroid (geodesic) or a flat earth (planar) method. It is recommended that you use the GEODESIC method with data stored in a coordinate system that is not appropriate for distance measurements (for example, Web Mercator or any geographic coordinate system) and any analysis that spans a large geographic area.

  • PLANARPlanar distances will be used between the features. This is the default.
  • GEODESICGeodesic distances will be used between features. This method takes into account the curvature of the spheroid and correctly deals with data near the dateline and poles.
String
field_names
[[property, fieldname],...]
(Optional)

Specifies the names of the attribute fields that will be added during processing.

If this parameter is not used or any fields that will be added are excluded from this parameter, the default field names will be used.

By default, NEAR_FID and NEAR_DIST fields will always be added, NEAR_X and NEAR_Y fields will be added when the Location parameter (location in Python) is enabled, the NEAR_ANGLE field will be added when the Angle parameter (angle in Python) is enabled, and the NEAR_FC field will be added when multiple inputs are used.

Value Table

Derived Output

NameExplanationData Type
out_feature_class

The updated input features.

Feature Layer

Code sample

Near example 1 (Python window)

The following Python interactive window script demonstrates how to use the Near function in immediate mode.

import arcpy
arcpy.env.workspace = "C:/data/city.gdb" 

# Find the nearest road from each house
arcpy.analysis.Near('houses', 'roads')
Near example 2 (stand-alone script)

The following Python script demonstrates how to use the Near function in a stand-alone script.

# Name: Near.py
# Description: Finds nearest features from input feature class to near feature class.

import arcpy

# Set workspace environment
arcpy.env.workspace = "C:/data/city.gdb"

try:
    # set local variables
    in_features = "houses"
    near_features = "parks"
    
    # find features only within search radius
    search_radius = "5000 Meters"
    
    # find location nearest features
    location = "LOCATION"
    
    # avoid getting angle of neares features
    angle = "NO_ANGLE"
    
    # execute the function
    arcpy.analysis.Near(in_features, near_features, search_radius, location, angle)
    
    # get geoprocessing messages
    print(arcpy.GetMessages())

except arcpy.ExecuteError:
    print(arcpy.GetMessages(2))
    
except Exception as err:
    print(err.args[0])
Near example 3 (stand-alone script)

The following Python script demonstrates how to convert the near angle to azimuth.

# Name: near_angle_to_azimuth.py

import arcpy

# Near tool does not calculate angle in azimuths
# This script, using the output of the tool, converts the angles
# to azimuth angles.

in_table = r"C:/data/city.gdb/near_table"
    
angles = arcpy.da.SearchCursor(in_table, ["NEAR_ANGLE"])

azimuth_angles = []

with angles as rows:
    for row in rows:
        angle = row[0]
        if angle <= 180 and angle > 90:
            azimuth_angles.append(360.0 - (angle - 90))
        else:
            azimuth_angles.append(abs(angle - 90))

# Use these azimuth angles as necessary.
Near example 4 (stand-alone script)

The following Python script demonstrates postprocessing with the Near function's derived output. The script finds, for each near feature, the input features it is closest to.

# Name: features_closest_to_input.py

"""
    This script finds, for each input feature, a list of near feature it is closest to.
    If near features 6, 7, 10 are closest to input feature 3 then the 
    resulting dictionary will have a list [6, 7, 10] as value for key 3
"""

import os
import arcpy

in_fc = r"C:\data\cities.gdb\cities_many"

# create a dictionary to hold the list of near ids for each input id
nearest_dict = dict()

with arcpy.da.SearchCursor(in_fc, ["OID@", "NEAR_FID"]) as rows:
    for row in rows:
        nearest_id = row[0]  # get OID value for that row
        input_id = row[1]    # get NEAR_FID value 
        
        if input_id in nearest_dict:
            # if a dict key already exists, append near id to value list for that key
            nearest_dict[input_id].append(nearest_id)
        else:
            # if the key does not exist then create a new list with near id
            # and add it to the dictionary
            nearest_dict[input_id] = [nearest_id]
            
print(nearest_dict)

# output will look like:
# {1: [13, 28], 2: [2, 9, 14, 20, 22], 3: [11, 12, 24, 25]}

Licensing information

  • Basic: Yes
  • Standard: Yes
  • Advanced: Yes

Related topics