Satellite sensor raster types

There are many satellite sensor products to choose from, and each has properties you can refine to modify the processing applied to the imagery when it's added to a mosaic dataset. There are several defaults, but you can further modify these and save them for your own use at another time.

You can refine each raster type below by defining the product type. You have the option to add all product types if you are unfamiliar with your data. This adds all your particular data, no matter how it was provided by the vendor. However, if you only want to add specific products to your mosaic dataset, choose the appropriate product type. For example, for QuickBird imagery, you can choose All, Basic, Standard, Standard Orthoready, and Orthorectified. Each of these options maps directly to a product provided by the vendor.

You can further refine how your data is added and processed by defining a processing template. These templates are specific to the type of data in each band. For example, in Landsat 7 ETM+ Level 1 products, there are nine bands. Band 8 is panchromatic and has the highest spatial resolution; bands 1 through 5 and 7 are multispectral bands (blue, green, red, and infrared) and have a lower spatial resolution than the panchromatic band; and bands 6a and 6b are thermal bands. For the Level 1 products, there are six processing templates:

  • All Bands—The data is added and grouped in any or all of the processing templates that apply. For example, for Landsat 7, three entries will be created in the mosaic dataset for each scene: Panchromatic (band 8), Multispectral (bands 1 through 5 and 7), and Thermal (bands 6a and 6b). A field is added to the attribute table named Tag, which identifies the group each band belongs to, for example, Pan for panchromatic, MS for multispectral, and Thermal for the thermal bands.
  • Panchromatic—Only the panchromatic band is added to the mosaic dataset. For example, for Landsat 7, only band 8 is added.
  • Multispectral—The multispectral bands are added as a single raster dataset in the mosaic dataset. For example, for Landsat 7, there will be a single row in the mosaic dataset representing bands 1 through 5 and 7.
  • Pansharpen—The bands used to generate the pan-sharpened product are added to the mosaic dataset. This generally results in a four-band mosaic dataset using the red, green, blue, infrared, and panchromatic bands.
  • Pansharpen and Multispectral—The standard combination of multispectral and panchromatic bands added to the mosaic dataset. For example, for Landsat, a multispectral group will be added, but it will have a minimum pixel size set to the maximum pixel size of the panchromatic image. That way, the mosaicked image will not be pan sharpened when you zoom out beyond the resolution of the panchromatic image.
  • Thermal—The thermal bands are added as a single raster dataset in the mosaic dataset. For example, for Landsat 7, there will be a single row in the mosaic dataset representing bands 6a and 6b.

In addition to these processing templates, Landsat 4-5 TM, Landsat 7 ETM+, and Landsat 8 raster types support higher-level science data products including the Landsat Analysis Ready Data (ARD). See Landsat 7 ETM+ for information on the product types and processing templates that support the higher-level science data products.

By default, the bands will be ordered sequentially—the first band in the source will be the first band in the raster added to the mosaic dataset, and so on. However, if you defined a product definition when creating the mosaic dataset, the data defined by these raster types will be added according to their wavelengths. For example, if the product definition is Natural Color (RGB), the bands with the wavelengths closest to the red, green, and blue wavelengths will be added to the raster in the mosaic dataset. If your dataset does not have a band of a particular wavelength, the closest wavelength will be chosen.

Note:

If a Product Definition value is defined when creating the mosaic dataset, add the data using the correct template for the raster type. For example, if you defined Landsat for the mosaic dataset's product definition, it will be expecting a dataset with five bands. Therefore, you should use the raster type's Multispectral template. If you use the Pansharpen template, it only adds the first four bands to the mosaic dataset and the other will be empty.

The default template is often the combined Pansharpen and Multispectral templates.

ASTER

Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) is an advanced multispectral imager that was launched by NASA in December 1999. ASTER covers a wide spectral region with 14 bands from the visible to the thermal infrared with high spatial, spectral, and radiometric resolution. The spatial resolution varies with wavelength: The visible and near infrared (VNIR) at 15 meters, the shortwave infrared (SWIR) at 30 meters, and the thermal infrared (TIR) at 90 meters. Each ASTER scene covers an area of 60 by 60 kilometers. To learn more about this sensor, see the ASTER on the NASA TERRA website.

Several ASTER products are supported:

  • Level 1
    1. L1T - Registered Radiance at the Sensor - Precision Terrain Corrected
    2. L1B - Registered Radiance at the Sensor
  • Level 2
    1. AST 05 - Surface Emissivity
    2. AST07 - Surface Reflectance
    3. AST 08 - Surface Kinetic Temperature
    4. AST09 - Surface Radiance
  • Level 3
    1. AST14DEM - Digital Elevation Model
    2. AST14OTH - Registered Radiance at the Sensor - Orthorectified
    3. AST14DMO - Digital Elevation Model and Registered Radiance at the Sensor - Orthorectified

Product typeProcessing templates
  • All
  • DEM
  • L1B
  • L1T
  • Registered Radiance
  • Surface Emissivity
  • Surface Kinetic Temperature
  • Surface Radiance
  • Surface Reflectance
  • All Bands
  • Digital Elevation Model
  • Global Digital Elevation Model (ASTGTM)
  • Multispectral
  • SWIR
  • SWIR - Registered Radiance
  • SWIR - Surface Reflectance
  • SWIR - Surface Radiance
  • TIR
  • TIR - Registered Radiance
  • TIR - Surface Emissivity
  • TIR - Surface Kinetic Temperature
  • TIR - Surface Radiance
  • VNIR
  • VNIR - Registered Radiance
  • VNIR - Surface Reflectance
  • VNIR - Surface Radiance

Spectral range

TagBand orderWavelength (nm)Description

VNIR

1

520–600

Visible near infrared 1

VNIR

2

630–690

Visible near infrared 2

VNIR

3

760–860

Visible near infrared 3N

VNIR

4

760–860

Visible near infrared 3B2

SWIR

1

1600–1700

Shortwave infrared 4

SWIR

2

2145–2185

Shortwave infrared 5

SWIR

3

2185-2225

Shortwave infrared 6

SWIR

4

2235-2285

Shortwave infrared 7

SWIR

5

2295-2365

Shortwave infrared 8

SWIR

6

2360-2430

Shortwave infrared 9

TIR

1

8125-8475

Thermal infrared 10

TIR

2

8475-8825

Thermal infrared 11

TIR

3

8925-9275

Thermal infrared 12

TIR

4

10250-10950

Thermal infrared 13

TIR

5

10950-11650

Thermal infrared 14

Spectral range

BlackSky

The BlackSky raster type allows you to add raster data collected from the BlackSky's satellite constellation. These satellites are launched into a mid-inclination orbit providing high revisit rate cadence, responsive last-minute tasking and timely collect-to-data-delivery latency timeframes in the mid-latitudes between 53.5°N and 53.5°S. To learn more about this sensor, see .

The BlackSky sensor has three product types:

Product typeProcessing templates
  • All
  • Ortho
  • NonOrtho
  • All Bands
  • Multispectral
  • Panchromatic

Spectral range

TagBand orderWavelength (nm)Description

PAN

1

450–700

Panchromatic

MS

1

590–700

Red

MS

2

500–590

Green

MS

3

450–520

Blue

Spectral range

DEIMOS-2

The DEIMOS-2 raster type allows you to add raster data collected from the DEIMOS-2 satellite, which is the second DEIMOS Earth observation system. DEIMOS-2 is a very high resolution multispectral optical satellite that has a 4-meter multispectral resolution. The panchromatic band has a 1-meter resolution, and a pan-sharpened product of 0.75 meters can be created after it has been ground processed. It operates in a Sun-synchronous orbit at an approximate altitude of 620 km. It operates a push-broom sensor that records five bands. To learn more about this sensor, see Deimos-2.

The DEIMOS-2 sensor has one product level:

  • Level 1—This product is corrected for geometric distortions.

Product typeProcessing templates
  • All
  • Level 1
  • All Bands
  • Multispectral
  • Panchromatic
  • Pansharpen

Spectral range

TagBand orderWavelength (nm)Description

PAN

1

560–900

Panchromatic

MS

2

466–525

Blue

MS

3

532–599

Green

MS

4

640–697

Red

MS

5

770–892

Near infrared

Spectral range

DMCii

The DMCii raster type allows you to add raster data collected from the DMC satellites, such as AlSat-1, Beijing-1, Deimos-1, NigeriaSat-1, UK-DMC, and UK-DMC2.

Product typeProduct type descriptionsProcessing templates

All

Both L1R and L1T products will be looked for when adding image data.

  • All Bands
  • Multispectral
  • Pseudocolor

L1R

This applies to L1R, a band-registered product derived from raw satellite data.

L1T

Orthorectified product derived from L1R product.

DMCii product types

The metadata for L1R and L1T product types is stored within the DIMAP (.dim) files.

Use the Pseudocolor processing template to view the DMCii imagery as a natural color image.

DMCii spectral range

TagBand orderWavelength (nm)Description

MS

3

520–600

Green

MS

2

630–690

Red

MS

1

770–900

Near infrared

Spectral range

DubaiSat-2

The DubaiSat-2 raster type allows you to add raster data collected from the DubaiSat-2 satellite, which is the second Earth observation satellite of the United Arab Emirates (UAE) in continuation of the DubaiSat-1 project. DubaiSat-2 generates imagery at a spatial resolution of 1 meter in panchromatic and 4 meters in multispectral bands. To learn more about this sensor, see Emirates Institution for Advanced Science & Technology.

There are two product levels for DubaiSat-2:

  • Geo—This product has had some geometric correction in addition to the radiometric and sensor correction and has been orthorectified based on ground control points. It uses a digital elevation model to eliminate distortions due to relief and has been georeferenced to a UTM projection. You can use this product with any processing template.
  • Radio—This product has had some radiometric correction applied to fix distortions due to differences in the sensitivity of the elementary detectors of the sensor. You can use this product with any processing template.

Product typeProcessing templates
  • All
  • Geo
  • Radio
  • All Bands
  • Multispectral
  • Panchromatic
  • Pansharpen
  • Pansharpen and Multispectral

Spectral range

TagBand orderWavelength (nm)Description

MS

1

420–510

Blue

MS

2

510–580

Green

MS

3

600–720

Red

MS

4

760–890

Near infrared

Pan

1

450–900

Panchromatic

Spectral range

FORMOSAT-2

The FORMOSAT-2 raster type allows you to add raster data collected from the FORMOSAT-2 satellite. To learn more about this sensor, see Airbus Defence and Space.

FORMOSAT-2 supports three types of products:

  • Level 1A—This product has had some radiometric correction applied to fix distortions due to differences in the sensitivity of the elementary detectors of the sensor. You can use this product with any processing template and specify a DEM in the raster type's properties.
  • Level 2A—This product has had the same radiometric correction as applied in the Level 1A product and has been georeferenced to a UTM WGS84 projection (without using ground control points). You can use this product with any processing template.
  • Ortho—This product has had the same radiometric correction as applied in the Level 1A product and has been orthorectified based on ground control points and a digital elevation model to eliminate distortions due to relief. You can use this product with any processing template.

Product typeProcessing templates
  • All
  • FORMOSAT-2 Ortho
  • FORMOSAT-2 Scene 1A
  • FORMOSAT-2 Scene 2A
  • Multispectral
  • Panchromatic
  • All Bands

Spectral range

TagBand orderWavelength (nm)Description

MS

1

630–690

Red

MS

2

520–600

Green

MS

3

450–520

Blue

MS

4

770–900

Near infrared

Pan

1

450–900

Panchromatic

Spectral range

GeoEye-1

The GeoEye-1 raster type allows you to add raster data collected from the GeoEye-1 satellite sensor and the OrbView-3 satellite sensor. To learn more about these sensors, see Maxar.

Product typeProcessing templates
  • All
  • Basic
  • Orthorectified
  • Orthorectified AComp
  • Standard
  • Standard AComp
  • Standard Orthoready
  • Standard Orthoready AComp
  • All Bands
  • Multispectral
  • Multispectral AComp
  • Panchromatic
  • Panchromatic AComp
  • Pansharpen
  • Pansharpen AComp
  • Pansharpen and Multispectral
GeoEye product type mapping

Spectral range

TagBand orderWavelength (nm)Description

Pan

1

450–800

Panchromatic

MS

1

450–510

Blue

MS

2

510–580

Green

MS

3

655–690

Red

MS

4

780–920

Near infrared

GeoEye-1 spectral range

GF-1 PMS

Gaofen-1 (GF-1), China’s high-resolution earth observation satellite, was launched in April 2013. The GF-1 PMS raster type allows you to add raster data collected from the GF-1 PMS sensor, which collects panchromatic and multispectral data.

Product typeProcessing templates
  • All
  • Level 1A
  • Level 1C
  • All Bands
  • Multispectral
  • Panchromatic
  • Pan sharpen
  • Pan sharpen and Multispectral

Spectral range

TagBand orderWavelength (nm)Description

Pan

1

450–900

Panchromatic

MS

1

450–520

Blue

MS

2

520–590

Green

MS

3

630–690

Red

MS

4

770–890

Near infrared

Spectral range

To learn more about this sensor, refer to the Earth Observation Portal website.

GF-1 WFV

The GF-1 WFV raster type allows you to add raster data collected from the GF-1 WFV sensor. The WFV captures data used for wide field viewing.

Product typeProcessing templates
  • All
  • Level 1A
  • Level 1C
  • All Bands
  • Multispectral

Spectral range

TagBand orderWavelength (nm)Description

MS

1

450–520

Blue

MS

2

520–590

Green

MS

3

630–690

Red

MS

4

770–890

Near infrared

Spectral range

To learn more about this sensor, refer to the Earth Observation Portal Link to Earth Observation Portal website website.

GF-2 PMS

Launched on August 19, 2014, the GF-2 PMS has a 1-meter spatial resolution and a 45-kilometer-swath width. You can use it for geographic and natural resource surveys, environment and climate change monitoring, precision agriculture, disaster relief, and city planning. The data comes as a Level 1 product.

Spectral range

TagBand orderWavelength (nm)Description

Pan

1

450–900

Panchromatic

MS

1

450–520

Blue

MS

2

520–590

Green

MS

3

630–690

Red

MS

4

770–890

Infrared

Spectral range

Product typeProcessing templates
  • Level 1
  • All Bands
  • Multispectral
  • Panchromatic
  • Pan sharpen
  • Pan sharpen and Multispectral

To learn more about this sensor, refer to the Earth Observation Portal website.

GF-4

The GF-4 satellite is the first geosynchronous orbiting satellite in China. It is equipped with a stare sensor that has a swath of over 400 kilometers. The visible and near infrared (VNIR) portion of the spectrum has a resolution of 50 meters. The mid-wave infrared (MWIR) portion has a resolution of 400 meters. GF-4 is based on area array staring imaging and has the capability of visible light, multispectrum, and infrared imaging. To learn more about this sensor, see GF-4.

Product typeProcessing templates

Level 1

  • All Bands
  • Multispectral
  • MWIR
  • Panchromatic
  • VNIR
GF-4 product type and processing templates

TagBand orderWavelength (nm)Description

Pan

1

450–900

Panchromatic

MS

2

450–520

Blue

MS

3

520–600

Green

MS

4

630–690

Red

MS

5

760–900

Near infrared

MWIR

1

3500–4100

Mid-wave infrared

GF-4 spectral ranges

HJ 1A/1B CCD

The HJ 1A/1B CCD raster type allows you to add raster data collected from HJ-1A and HJ-1B satellites designed for environment and disaster monitoring.

Product typeProcessing templates
  • Level 2
  • Multispectral

Spectral range

TagBand orderWavelength (nm)Description

MS

1

430–520

Blue

MS

2

520–600

Green

MS

3

630–690

Red

MS

4

760–900

Near infrared

Spectral range

To learn more about these sensors, refer to the HJ-1A/1B specificationsLink to specifications for HJ-1A/1B website.

IKONOS

The IKONOS raster type allows you to add raster data collected from the IKONOS satellite sensor. To learn more about this sensor, see Maxar Maxar.

Product typeProcessing templates
  • All
  • Geo
  • GeoProfessional
  • All Bands
  • Multispectral
  • Panchromatic
  • Pansharpen
  • Pansharpen and Multispectral

Spectral range

TagBand orderWavelength (nm)Description

Pan

1

526–929

Panchromatic

MS

1

445–516

Blue

MS

2

506–595

Green

MS

3

632–698

Red

MS

4

757–863

Near infrared

Spectral range

Jilin-1

The Jilin-1 is the China's first self-developed remote sensing satellite for commercial use. It is a 420-kilogram high-definition optical satellite with a 0.72-meter resolution panchromatic sensor and 2.88-meter resolution multispectral sensor. It is equipped with three deployable solar panels for power generation that are stored in internal batteries. The satellite will operate on a 656-kilometer Sun-synchronous orbit. To learn more about this sensor, see Jilin-1.

The Jilin-1 sensor has one product level:

  • Level 1—This product has been corrected for geometric radiometric distortions and projected to UTM, with an RPC file.

Product typeProcessing templates
  • All
  • Level 1
  • All Bands
  • Multispectral
  • Panchromatic
  • Pansharpen
  • Pansharpen and Multispectral

Spectral range

TagBand orderWavelength (nm)Description

Pan

1

500–800

Panchromatic

MS

1

450–520

Blue

MS

2

520–600

Green

MS

3

630–690

Red

Spectral range

KOMPSAT-2

The KOMPSAT-2 raster type allows you to add raster data collected from KOMPSAT-2 (Korea Multi-Purpose Satellite-2). To learn more about this sensor, see Korea Aerospace Research Institute.

The KOMPSAT-2 products are generated in KARI and DIMAP format. There are two supported KOMPSAT-2 products:

  • Level 1A—This product has had some radiometric correction applied to fix distortions due to differences in the sensitivity of the elementary detectors of the sensor.
  • Level 2A—This product has had the same radiometric correction as applied in the Level 1A product and has been georeferenced to a UTM WGS84 projection (without using ground control points).

Product typeProcessing templates
  • All
  • KOMPSAT-2 Scene 1A
  • KOMPSAT-2 Scene 2A
  • All Bands
  • Multispectral
  • Panchromatic
  • Pansharpen
  • Pansharpen and Multispectral

Spectral range

TagBand orderWavelength (nm)Description

MS

1

450–520

Blue

MS

2

520–600

Green

MS

3

630–690

Red

MS

4

760–900

Near infrared

Pan

1

500–900

Panchromatic

Spectral range

KOMPSAT-3

The KOMPSAT-3 raster type allows you to add raster data collected from KOMPSAT-3 (Korea Multi-Purpose Satellite-3, also known as Arirang-3), a high-resolution Korean observation mission of the Korea Aerospace Research Institute (KARI). To learn more about this sensor, see Korea Aerospace Research Institute and Satellite Imaging Corporation.

The KOMPSAT-3 satellite supports three product types:

  • Level 1G—This product has had some geometric correction in addition to the radiometric and sensor correction and has been orthorectified based on ground control points. It uses a digital elevation model to eliminate distortions due to relief and has been georeferenced to a UTM projection. You can use this product with any processing template.
  • Level 1R—This product has had some radiometric correction applied to fix distortions due to differences in the sensitivity of the elementary detectors of the sensor. You can use this product with any processing template.
  • Level 1O—This product has had some geometric correction in addition to the radiometric and sensor correction and has been orthorectified based on average height over the region. It is georeferenced to a UTM projection, and you can use it with any processing template.

Product typeProcessing templates
  • All
  • Level 1G
  • Level 1R
  • Level 1O
  • All Bands
  • Multispectral
  • Panchromatic
  • Pansharpen
  • Pansharpen and Multispectral

Spectral range

TagBand orderWavelength (nm)Description

MS

1

450–520

Blue

MS

2

520–600

Green

MS

3

630–690

Red

MS

4

760–900

Near infrared

Pan

1

450–900

Panchromatic

Spectral range

Landsat 1–5 MSS

The Landsat 1–5 MSS raster type allows you to add raster data collected from the Landsat Multispectral Scanner (MSS) instrument. The MSS instrument operated on the first five Landsat satellite spacecrafts. To learn more about this, see Landsat science.

Product typeProcessing template
  • All
  • Level 1 (L1G)
  • All Bands
  • Multispectral
  • Pseudocolor
  • Thermal

Use the Pseudocolor processing template to view the Landsat 1–5 MSS imagery as a natural color image.

Spectral range

TagBand orderWavelength (nm)Description

MS

1

500–600

Green

MS

2

600–700

Red

MS

3

700–800

Near infrared 1

MS

4

800–1100

Near infrared 2

Thermal

1

10400–12500

Thermal

Spectral range

Landsat 4–5 TM

The Landsat 4–5 TM raster type allows you to add raster data collected from the Landsat Thematic Mapper (TM) instrument. To learn more about this and Landsat higher-level science data products, see Landsat science and Landsat higher-level science data products.

Product typeProcessing template
  • All
  • Brightness Temperature
  • Level 1
  • Spectral Indices
  • Surface Reflectance
  • Top of Atmosphere Reflectance
  • All Bands
  • Brightness Temperature
  • Multispectral
  • Spectral Indices
  • Surface Reflectance
  • Thermal
  • Brightness Temperature
  • Top of Atmosphere Reflectance

Spectral range

TagBand orderWavelength (nm)Description

MS

1

450–520

Blue

MS

2

520–600

Green

MS

3

630–690

Red

MS

4

760–900

Near infrared 1

MS

5

1550–1750

Near infrared 2

MS

6

2080–2350

Mid infrared

Thermal

1

10400–12500

Thermal

Spectral range

Landsat 7 ETM+

The Landsat 7 ETM+ raster type allows you to add raster data collected from the Landsat Enhanced Thematic Mapper Plus (ETM+) instrument. To learn more about this and Landsat higher-level science data products, see Landsat science.

Product typeProcessing template
  • All
  • Brightness Temperature
  • Level 1 (L1G, L1T)
  • Spectral Indices
  • Surface Reflectance
  • Top of Atmosphere Reflectance
  • All Bands
  • Brightness Temperature
  • Multispectral
  • Panchromatic
  • Pansharpen
  • Pansharpen and Multispectral
  • Spectral Indices
  • Surface Reflectance
  • Thermal
  • Top of Atmosphere Reflectance

Spectral range

TagBand orderWavelength (nm)Description

MS

1

450–520

Blue

MS

2

520–600

Green

MS

3

630–690

Red

MS

4

770–900

Near infrared 1

MS

5

1550–1750

Near infrared 2

MS

6

2080–2350

Mid infrared

Thermal

1

10400–12500

Thermal 1

Thermal

2

10400–12500

Thermal 2

Pan

1

520–900

Panchromatic

Spectral range

Landsat 8

The Landsat 8 raster type allows you to add raster data collected from Landsat 8, as part of the Landsat series of remote sensing satellites launched for the Landsat Data Continuity Mission. To learn more about this and Landsat higher-level science data products, see Landsat science and Landsat higher-level science data products.

Note:

When Landsat 8 Surface Reflectance and ARD data is added to a mosaic dataset, a function is available in the raster dataset properties to add a mask. This mask allows you to mask out unwanted image data values that can affect subsequent raster functions such as negative values.

Product typeProcessing template
  • All
  • Brightness Temperature
  • Level 1 (L1G, L1T)
  • Spectral Indices
  • Surface Reflectance
  • Top of Atmosphere Reflectance
  • All Bands
  • Brightness Temperature
  • Cirrus
  • Cloud
  • Landcover
  • Multispectral
  • Panchromatic
  • Pansharpen
  • Pansharpen and Multispectral
  • QA
  • SnowIce
  • Spectral Indices
  • Surface Reflectance
  • Thermal
  • Top of Atmosphere Reflectance
  • Vegetation
  • Water

Landsat 8 Spectral range

TagBand orderWavelength (nm)Description

MS

1

430–450

Coastal Aerosol

MS

2

450–510

Blue

MS

3

530–590

Green

MS

4

640–670

Red

MS

5

850–880

Near infrared

MS

6

1570–1650

Shortwave infrared 1

MS

7

2110–2290

Shortwave infrared 2

MS

8

1360–1380

Cirrus

Thermal

1

10600–11190

Thermal Infrared 1

Thermal

2

11500–12510

Thermal Infrared 2

Pan

1

500–680

Panchromatic

Landsat 8 Spectral range

Landsat 9

The Landsat 9 raster type allows you to add raster data collected from Landsat 9, the latest in the Landsat series of remote sensing satellites started as part of the Landsat Data Continuity Mission.

To learn more about this and Landsat higher-level science data products, see Landsat science and Landsat higher-level science data products.

Product typeProcessing template
  • All
  • Level 1 (L1G, L1T)
  • Surface Reflectance
  • Spectral Indices
  • Top of Atmosphere Reflectance
  • Brightness Temperature
  • Surface Temperature
  • All Bands
  • Brightness Temperature
  • Cirrus
  • Cloud
  • Landcover
  • Multiband
  • Multispectral
  • Panchromatic
  • Pansharpen
  • Pansharpen and Multispectral
  • QA
  • SnowIce
  • Spectral Indices
  • Surface Reflectance
  • Surface Temperature
  • Thermal
  • Top of Atmosphere Reflectance
  • Vegetation
  • Water

Landsat 9 Spectral range

TagBand orderWavelength (nm)Description

MS

1

430–450

Coastal Aerosol

MS

2

450–510

Blue

MS

3

530–590

Green

MS

4

640–670

Red

MS

5

850–880

Near infrared

MS

6

1570–1650

Shortwave infrared 1

MS

7

2110–2290

Shortwave infrared 2

MS

8

1360–1380

Cirrus

Thermal

1

10600–11190

Thermal Infrared 1

Thermal

2

11500–12510

Thermal Infrared 2

Pan

1

500–680

Panchromatic

Landsat 9 Spectral range

MAXAR (Analysis-ready data)

Analysis-ready data (ARD) is preprocessed time-series stacks of imagery that you can use for change detection, mapping, and monitoring. These datasets provide usable content for feature extraction and faster processing for analytic workflows. ARD datasets are currently produced from data collected by the satellites from the Maxar constellation consisting of WorldView-2 and GeoEye-1.

Product typeProcessing templates
  • All
  • Multispectral
  • Panchromatic
  • Pansharpen
  • Pansharpen and Multispectral
  • Visual
MAXAR product types

Band information is based on what satellite the data has been acquired from. This will be either GeoEye-1 or WorldView-2.

For more information, refer to MAXAR product specification.

NCDRD

NCDRD is an acronym for NITF Version 2.1 Commercial Dataset Required Document. The NCDRD raster type allows you to add NITF images that follow NCDRD specifications into mosaic datasets. This raster type supports NCDRD products from many satellites: GeoEye-1, IKONOS, QuickBird, WorldView-1, and WorldView-2.

Product typeProcessing templates
  • Preprocessed (P1, P2, P3)
  • Georeferenced (G1, G2, G3)
  • Orthorectified (R1, R2, R3)
  • Default
  • Multispectral
  • Panchromatic
  • Pansharpen
  • Pansharpen and Multispectral
NCDRD product types

The Default processing template adds and groups data in all of the processing templates that apply. A field is added to the attribute table named Tag, which identifies within which group each band belongs:

  • Pan—Panchromatic
  • MS—Multispectral
  • Thermal—Thermal Bands

Images added to a mosaic dataset via the NCDRD raster type will have metadata columns extracted from the NITF header as well as key metadata from satellite sensors, such as Sun Azimuth and Sun Elevation.

PlanetScope

PlanetScope is a satellite constellation that consists of 130 satellites capturing images of the earth’s land surface daily. The constellation consists of multiple launches of groups of individual CubeSat satellites.

Based on the sensor instrument used, the data acquired from the constellation consists of four-band or five-band multispectral imagery:

  • Four bands—Red, green, blue, and near infrared bands
  • Five bands—Red, green, blue, and near infrared bands and an additional RedEdge band

Product typeProcessing templates
  • All
  • Level1—PlanetScope Basic Scene product
  • Level3—PlanetScope Ortho Scene product
  • Multispectral
PlanetScope product types

For more information, refer to Planet imagery product specification.

Pléiades

The Pléiades raster type allows you to add raster data collected from the Pléiades satellite sensor. To learn more about this sensor, see Airbus Defence and Space.

Product typeProcessing templates
  • All
  • ORTHO
  • PRIMARY
  • PROJECTED
  • ORTHO REFLECTANCE
  • PRIMARY REFLECTANCE
  • PROJECTED REFLECTANCE
  • ORTHO DISPLAY
  • PRIMARY DISPLAY
  • PROJECTED DISPLAY
  • All Bands
  • Multispectral
  • Multispectral Display
  • Multispectral Reflectance
  • Panchromatic
  • Panchromatic Display
  • Panchromatic Reflectance
  • Pansharpen
  • Pansharpen and Multispectral
  • Pansharpen Display
  • Pansharpen Reflectance
Pléiades product types

Pléiades spectral range

TagBand orderWavelength (nm)Description

MS

1

450–530

Blue

MS

2

510–590

Green

MS

3

620–700

Red

MS

4

775–915

Near infrared

Pan

1

450–530

Panchromatic

Spectral range

Pléiades Neo

Pléiades Neo is a constellation of four identical high-resolution optical satellites. These were launched onboard the Arianespace's Vega rockets in 2021 and 2022. These satellites have a 10-year expected lifetime. They will ensure the provision of 30-centimeter resolution imagery until at least 2032, and consequently, the continuity of Airbus Intelligence's high standard geoinformation services.

The Pléiades Neo constellation offers a combination of the panchromatic (30-centimeter product resolution) and multispectral (1.2-meter product resolution) bands. The images can be visualized as either black-and-white natural colors, false colors, or merged product (pan-sharpened color image) with the resolution of a panchromatic image.

To learn more about Pleiades Neo, see Airbus Defence and Space.

Product typeProcessing templates
  • All
  • ORTHO
  • PRIMARY
  • PROJECTED
  • ORTHO REFLECTANCE
  • PRIMARY REFLECTANCE
  • PROJECTED REFLECTANCE
  • ORTHO DISPLAY
  • PRIMARY DISPLAY
  • PROJECTED DISPLAY
  • All Bands
  • Multispectral
  • Multispectral Display
  • Multispectral Reflectance
  • Panchromatic
  • Panchromatic Display
  • Panchromatic Reflectance
  • Pansharpen
  • Pansharpen and Multispectral
  • Pansharpen Display
  • Pansharpen Reflectance
Pléiades Neo product types

Pléiades Neo spectral range

TagBand orderWavelength (nm)Description

MS

1

400-450

Deep Blue

MS

2

450–520

Blue

MS

3

530–590

Green

MS

4

620–690

Red

MS

5

700-750

RedEdge

MS

6

770–880

Near infrared

Pan

1

450–800

Panchromatic

Spectral range

SkySat

The SkySat-C generation satellite is a high-resolution Earth imaging satellite, first launched in 2016. They are part of the Planet constellation of satellites that are collecting thousands of square kilometers of imagery.

The following product types are supported:

Basic—The SkySat Basic Scene is imagery that is uncalibrated and in a raw digital number (DN) format. This is accompanied by rational polynomial coefficients (RPCs) to enable orthorectification, allowing you to geometrically correct the product yourself.

Ortho—The SkySat Ortho Scene is sensor and geometrically corrected. This product is projected to a cartographic map projection. The geometric correction uses fine digital elevation models (DEMs) with a post spacing of between 30 and 90 meters.

Product typeProcessing templates
  • All
  • Basic
  • Ortho
  • All Bands
  • Multispectral
  • Panchromatic
  • Pansharpen
  • Pansharpen and Multispectral
  • SkySat Pansharpen
  • Visual
SkySat product types

SkySat spectral range

TagBand orderWavelength (nm)Description

Pan

1

450–900

Panchromatic

MS

1

450–515

Blue

MS

2

515–595

Green

MS

3

605-695

Red

MS

4

740–900

Near infrared

Spectral range

For more information, refer to the SkySat product specification.

QuickBird

The QuickBird raster type allows you to add raster data collected from the QuickBird satellite sensor. The product types in the ArcGIS application map to the similar product name provided by the vendor. Standard Orthoready is also known as Ortho Ready Standard Imagery.

To learn more about this sensor, see DigitalGlobe DigitalGlobe.

Product typeProcessing templates
  • All
  • Basic
  • Orthorectified
  • Orthorectified AComp
  • Standard
  • Standard AComp
  • Standard Orthoready
  • Standard Orthoready AComp
  • All Bands
  • Multispectral
  • Multispectral AComp
  • Panchromatic
  • Panchromatic AComp
  • Pansharpen
  • Pansharpen AComp
  • Pansharpen and Multispectral

Spectral range

TagBand orderWavelength (nm)Description

Pan

1

450–900

Panchromatic

MS

1

450–520

Blue

MS

2

520–600

Green

MS

3

630–690

Red

MS

4

760–900

Near infrared

Spectral range

RapidEye

The RapidEye raster type allows you to add raster data collected from the RapidEye satellite sensors. To learn more about this sensor, see Planet Labs.

Product typeProcessing template
  • All
  • Level 1B
  • Level 3A
  • Multispectral

Spectral range

TagBand orderWavelength (nm)Description

MS

1

440–510

Blue

MS

2

520–590

Green

MS

3

630–685

Red

MS

4

690–730

RedEdge

MS

5

760–850

Near infrared

Spectral range

Sentinel-2

Sentinel-2 spacecraft has a Multi-Spectral Instrument (MSI) that collects data in spectral bands spanning from the visible and the near infrared to the shortwave infrared spectra at three different resolutions:

  • 4 bands at 10 meters
  • 6 bands at 20 meters
  • 3 bands at 60 meters

Sentinel-2 MSI data is available as different product types and is systematically processed from Level 0 to Level 1C and Level 2A. Currently ArcGIS supports Level 1C and Level 2A products.

Level1—This corresponds to Level 1C processing level. The product results from using a digital elevation model (DEM) to project the image in cartographic coordinates. Per-pixel radiometric measurements are provided in Top of Atmosphere (TOA) reflectance with all parameters to transform them into radiance. Level 1C products are resampled with a constant Ground Sampling Distance (GSD) of 10, 20, and 60 meters, depending on the native resolution of the different spectral bands. In Level 1C products, pixel coordinates refer to the upper left corner of the pixel.

Level2—This corresponds to Level 2A processing level, which consists of scene classification and atmospheric correction applied to Level-1C orthoimage product. Level-2A is an Orthorectified Bottom-Of-Atmosphere (BOA) reflectance product. Level-2A products are resampled similar to Level-1C products with a constant GSD (Ground Sampling Distance) of 10m, 20m, and 60m according to the native resolution of the different spectral bands. The Scene Classification data is supported as a raster product.

To learn more about this sensor, see European Space Agency.

Since the Sentinel-2 Level 1C MSI data is distributed in three different resolutions, ArcGIS generates three different types of composite products based on the resolutions.

Product typeProcessing templates
  • All
  • Level1
  • Level2
  • Multispectral
  • Multispectral-10m
  • Multispectral-20m
  • Multispectral-60m
  • All Bands
  • True Color
  • BOA Reflectance
  • BOA Reflectance-10m
  • BOA Reflectance-20m
  • BOA Reflectance-60m
  • SCL-20m
  • SCL-60m
  • Aerosol Optical Thickness
  • Water Vapor

Spectral range

TagBand orderWavelength (nm)Description

Multispectral-60m

1

433–453

B1

Multispectral-10m

1

458–522

B2

Multispectral-10m

2

543–577

B3

Multispectral-10m

3

650–680

B4

Multispectral-20m

1

698–712

B5

Multispectral-20m

2

733–747

B6

Multispectral-20m

3

773–793

B7

Multispectral-10m

4

784–899

B8

Multispectral-20m

4

855–875

B8A

Multispectral-60m

2

935–955

B9

Multispectral-60m

3

1360–1390

B10

Multispectral-20m

5

1565–1655

B11

Multispectral-20m

6

2100–2280

B12

Spectral range

Sentinel-3

Sentinel-3 is the European Space Agency's (ESA) Earth Observation Satellite launched as part of the Copernicus program, which is jointly managed by European Organisation for the Exploitation of Meteorological Satellites (EUMETSAT). It is mainly intended to support ocean forecasting systems, environmental and climate monitoring, and maritime safety services by measuring sea surface topography, sea and land surface temperature, and ocean and land surface color.

ArcGIS Pro supports the following Sentinel-3 data products:

  • OLCI (Ocean and Land Colour Instrument) has 21 spectral bands (in the range of 400 nm to 1020 nm) with wavelengths ranging from the optical to the near infrared at a spatial resolution of 300 m. OLCI scans the ocean and land surface, provides information on the atmosphere by measuring water vapor absorption, aerosol levels, and chlorophyll absorption, and contributes to climate study.

    OLCI products are classified into the following product types:

    • Level 1—Top of Atmosphere (TOA) Radiance
    • Level 2—Land & Atmosphere and Ocean & Atmosphere
      • Rectified reflectance for the band O10 (RC681) and band O17 (RC865) : File rc_ogvi.nc in the land processing data.
  • SLSTR (Sea and Land Surface Temperature Radiometer) determines sea and land surface temperatures in nine spectral bands with two additional bands for fire monitoring to support global climate monitoring and change detection. The first six bands are VNIR (bands 1 to 3) and SWIR (bands 4 to 6) with a spatial resolution of 500 m, and all the other bands have a spatial resolution of 1 km.

    SLSTR products are classified into the following gridded product types:

    • Sea Surface Temperature
    • Land Surface Temperature
      • BIOMI product. GlobCover surface classification code (biome)
      • Brightness temperature product
      • Radiance product
      • Fire Detection, FRP product
  • Synergy (OLCI + SLSTR) is a combination of the OLCI and SLSTR products at a spatial resolution of 1 km. Its main objective is to monitor the land use and provide information related to the study of climate and vegetation.
    • Aerosol Angstrom Exponent at 550 nm
    • Aerosol Optical Thickness at 550 nm

Product typeProcessing templates
  • All
  • TOA Radiance (Level 1)
  • Land & Atmosphere (Level 2)
  • Land Surface Temperature (Level 2)
  • Sea Surface Temperature (Level 2)
  • Ocean & Atmosphere (Level 2)
  • Synergy (Level 2)
  • TOA Radiance
  • Integrated Water Vapour Column
  • OLCI Global Vegetation Index
  • OLCI Terrestrial Chlorophyll Index
  • Land Quality and Science Flags
  • Land Surface Temperature
  • GlobCover Surface Classification
  • Fractional Vegetation Cover
  • NDVI
  • Total Column Water Vapour
  • Sea Surface Temperature
  • Sea Ice Fraction
  • Wind Speed
  • Aerosol Contamination Indicator
  • Water Surface Directional Reflectance
  • Aerosol Angstrom Exponent
  • Aerosol Angstrom Exponent at 550m
  • Aerosol over Water
  • Total Suspended Matter Concentration
  • Transparency Properties of Water
  • Photosynthetically Active Radiation
  • Inherent Optical Properties of Water
  • OC4Me Algorithm Chlorophyll Concentration
  • Neural Net Chlorophyll Concentration
  • Aerosol Optical Thickness
  • Surface Directional Reflectance (OLCI)
  • Surface Directional Reflectance (SLSTR Nadir)
  • Surface Directional Reflectance (SLSTR Oblique)
  • Total Ozone Column
  • VGT Surface Reflectance

To learn more about the other product types and this sensor, see the European Space Agency website.

SPOT 5

The SPOT 5 raster type allows you to add raster data collected from the SPOT 5 satellite. To learn more about this sensor, see Airbus Defence and Space.

Three SPOT 5 products are supported:

  • Level 1A—This product has had some radiometric correction applied to fix distortions due to differences in the sensitivity of the elementary detectors of the sensor. Use this product with the Orthorectify processing template and specify a DEM in the raster type's properties.
  • Level 2A—This product has had the same radiometric correction as applied in the Level 1A product and has been georeferenced to a UTM WGS84 projection (without using ground control points). You can use this product with the Panchromatic, Multispectral, Pseudocolor, or Pansharpen processing templates.
  • SPOTView Ortho—This product has had the same radiometric correction as applied in the Level 1A product and has been orthorectified based on ground control points and a digital elevation model to eliminate distortions due to relief. You can use this product with the Panchromatic, Multispectral, Pseudocolor, or Pansharpen processing templates.

Product typeProcessing templates
  • All
  • SPOT Scene 1A
  • SPOT Scene 2A
  • SPOTView Ortho
  • All Bands
  • Multispectral
  • Panchromatic
  • Pansharpen
  • Pansharpen and Multispectral
  • Pseudocolor

Use the Pseudocolor processing template to view the SPOT imagery as a natural color image.

Spectral range

TagBand orderWavelength (nm)Description

MS

1

500–590

Green

MS

2

610–680

Red

MS

3

790–890

Near infrared

MS

4

1580–1750

Shortwave infrared

Pan

1

510–730

Panchromatic

Spectral range
Caution:

The SPOT DIMAP GeoTIFF product has a unique rearrangement of the band order, which allows you to open it directly in applications and see a standard false color image; however, the metadata references have not been rearranged. This can create some difficulty when you are trying to define specific functions, such as NDVI, because the near infrared band will be band 1 and not band 3. The raster type attempts to account for this modification; however, there may be unique cases where the metadata and file format are not designed as expected.

Spectral rangeMetadata referenceDIMAP GeoTIFF

Blue

n/a

n/a

Green

1 (or XS 1)

3

Red

2 (or XS 2)

2

NIR

3 (or XS 3)

1

SWIR

4 (or XS 4 or SWIR)

4

For more information, see Airbus Defence and Space.

SPOT 6 and SPOT 7

The SPOT 6 and SPOT 7 raster types allow you to add raster data collected from the SPOT 6 and SPOT 7 satellites. To learn more about this sensor, see Airbus Defence and Space.

There are various products supported by SPOT 6 and SPOT 7.

Product typeProcessing templates
  • All
  • ORTHO
  • ORTHO DISPLAY
  • ORTHO REFLECTANCE
  • PRIMARY
  • PRIMARY DISPLAY
  • PRIMARY REFLECTANCE
  • PROJECTED
  • PROJECTED DISPLAY
  • PROJECTED REFLECTANCE
  • All Bands
  • Multispectral
  • Multispectral Display
  • Multispectral Reflectance
  • Panchromatic
  • Panchromatic Display
  • Panchromatic Reflectance
  • Pansharpen
  • Pansharpen and Multispectral
  • Pansharpen Display
  • Pansharpen Reflectance

Spectral range

TagBand orderWavelength (nm)Description

MS

1

450–520

Blue

MS

2

530–590

Green

MS

3

625–695

Red

MS

4

760–890

Near infrared

Pan

1

450–745

Panchromatic

Spectral range

SuperView-1

The SuperView-1 or GaoJing-1 constellation consists of four Chinese commercial remote sensing satellites operated by Beijing Space View Tech Co Ltd. The main objective of the program is to provide data to be applied in defense and intelligence, land and forestry management, high-accuracy mapping, security, and maritime programs.

These satellites are the first very high-resolution Earth observation spacecrafts, designed in China. They collect imagery of both panchromatic (0.5 m) and multispectral (2 m) resolution with the 60 km x 70 km single scene maximum.

Product typeProcessing templates
  • All
  • Level1B
  • Level2A
  • Level3A
  • All Bands
  • Multispectral
  • Panchromatic
  • Pansharpen
  • Pansharpen and Multispectral
SuperView-1 product types

SuperView-1 spectral range

TagBand orderWavelength (nm)Description

Pan

1

450–890

Panchromatic

MS

1

450–520

Blue

MS

2

520–590

Green

MS

3

630-690

Red

MS

4

770–890

Near infrared

Spectral range

For more information, refer to SpaceWill SpaceWill.

TH-01

TH-01 is the first Chinese transmission type satellite. Launched on August 24, 2010, TH-01 has a triple stereo surveying and mapping sensor and a high-resolution multispectral sensor. It collects triplet stereo images, high-resolution images, and multispectral images globally. TH-01 is widely used in science research, land resource research, surveying, and mapping. The data comes as a Level 1 and Level 2 product.

Spectral range

TagBand orderWavelength (nm)Description

Pan-FWD

1

510–690

Pan forward

Pan-BWD

1

510–690

Pan backward

Pan-NAD

1

510–690

Pan nadir

MS

1

430–520

Blue

MS

2

520–610

Green

MS

3

610–690

Red

MS

4

760–900

Infrared

Spectral range

Product typeProcessing templates
  • Level 1
  • Level 2
  • All Bands
  • Double Line Stereo
  • Multispectral
  • Panchromatic BWD
  • Panchromatic FWD
  • Panchromatic NAD
  • Pan sharpen
  • Pan sharpen and Multispectral
  • Three Line Stereo

WorldView-1

The WorldView raster types allow you to add raster data collected from the WorldView-1, WorldView-2, or WorldView-3 satellite sensors. To learn more about these sensors, see Maxar.

Product typeProcessing templates
  • All
  • Basic
  • Standard
  • Standard Orthoready
  • Orthorectified
  • Panchromatic
WorldView-1 products

WorldView-1 spectral range

TagBand orderWavelength (nm)Description

Pan

1

400–900

Panchromatic

WorldView-1 spectral range

WorldView-2

The WorldView raster types allow you to add raster data collected from the WorldView-1, WorldView-2, or WorldView-3 satellite sensors. To learn more about these sensors, see Maxar.

Product typeProcessing templates
  • All
  • Basic
  • Orthorectified
  • Orthorectified AComp
  • Standard
  • Standard AComp
  • Standard Orthoready
  • Standard Orthoready AComp
  • All Bands
  • Multispectral
  • Multispectral AComp
  • Panchromatic
  • Panchromatic AComp
  • Pansharpen
  • Pansharpen AComp
  • Pansharpen and Multispectral
WorldView-2 products

WorldView-2 spectral range

TagBand orderWavelength (nm)Description

Pan

1

450–800

Panchromatic

MS

1

400–450

Coastal blue

MS

2

450–510

Blue

MS

3

510–580

Green

MS

4

585–625

Yellow

MS

5

630–690

Red

MS

6

705–745

RedEdge

MS

7

770–895

Near infrared 1

MS

8

860–1040

Near infrared 2

WorldView-2 spectral range

WorldView-3

The WorldView raster types allow you to add raster data collected from the WorldView-1, WorldView-2, or WorldView-3 satellite sensors. To learn more about these sensors, see Maxar. Currently, the raster type for WorldView-3 only includes support for the visible, near infrared, and shortwave infrared (SWIR) bands, but not for CAVIS.

Product typeProcessing templates
  • All
  • Basic
  • Orthorectified
  • Orthorectified AComp
  • Standard
  • Standard AComp
  • Standard Orthoready
  • Standard Orthoready AComp
  • All Bands
  • Multispectral
  • Multispectral AComp
  • Panchromatic
  • Panchromatic AComp
  • Pansharpen
  • Pansharpen AComp
  • Pansharpen and Multispectral
WorldView-3 products

WorldView-3 spectral range

TagBand orderWavelength (nm)Description

Pan

1

450–800

Panchromatic

MS

1

400–450

Coastal blue

MS

2

450–510

Blue

MS

3

510–580

Green

MS

4

585–625

Yellow

MS

5

630–690

Red

MS

6

705–745

RedEdge

MS

7

770–895

Near infrared 1

MS

8

860–1040

Near infrared 2

SWIR

1

1195–1225

Shortwave infrared 1

SWIR

2

1550–1590

Shortwave infrared 2

SWIR

3

1640–1680

Shortwave infrared 3

SWIR

4

1710–1750

Shortwave infrared 4

SWIR

5

2145–2185

Shortwave infrared 5

SWIR

6

2185–2225

Shortwave infrared 6

SWIR

7

2235–2285

Shortwave infrared 7

SWIR

8

2295–2365

Shortwave infrared 8

WorldView-3 spectral range

WorldView-4

WorldView-4, is a third generation commercial Earth observation satellite that has a maximum resolution of 31 cm. These are similar imagery as WorldView-3, the highest resolution commercially available at the time of its launch.

Currently ArcGIS supports the View-Ready/Standard Orthoready (OR2A) product and the System-Ready/Basic (1B). To learn more about these sensors, see Maxar.

Product typeProcessing templates
  • All
  • Basic
  • Standard Orthoready
  • All Bands
  • Multispectral
  • Panchromatic
  • Pansharpen
  • Pansharpen and Multispectral
WorldView-4 products

WorldView-4 spectral range

TagBand orderWavelength (nm)Description

Pan

1

450–800

Panchromatic

MS

1

450-510

Blue

MS

2

510-580

Green

MS

3

655-690

Red

MS

4

780-920

Near infrared

WorldView-4 spectral range

ZY02C HRC raster type

The ZY02C HRC raster type allows you to add raster data collected from the ZY-1 02C satellite.

The ZY02C HRC sensor has two product types:

  • Level 1A—This product has had radiometric correction but no geometric correction.
  • Level 2A—This product has been radiometric corrected and georeferenced.

Product typeProcessing templates
  • All
  • Level 1A
  • Level 2A
  • HRC1 (panchromatic of high-resolution camera)
  • HRC2 (panchromatic of high-resolution camera)
  • HRC (mosaic of the two panchromatic images)

Spectral range

TagBand orderWavelength (nm)Description

HRC1

1

450–950

Panchromatic

HRC2

1

450–950

Panchromatic

HRC

1

450–950

Panchromatic

Spectral range

ZY02C PMS raster type

The ZY02C PMS raster type allows you to add raster data collected from the ZY-1 02C satellite.

Product typeProcessing templates
  • All
  • Level 1
  • Level 2
  • All Bands
  • Multispectral
  • Panchromatic
  • Pan sharpen
  • Pan sharpen and Multispectral

Spectral range

TagBand orderWavelength (nm)Description

Pan

1

510–850

Panchromatic

MS

1

520–590

Green

MS

2

630–690

Red

MS

3

770–890

Near infrared

Spectral range

ZY3-CRESDA

The ZY3-CRESDA raster type allows you to add raster data collected from the ZY-3 satellite, which is distributed by China Center for Resources Satellite Data and Application (CRESDA).

Product typeProcessing templates
  • All
  • Level 1
  • Level 2

Note:

Other types of products produced by CRESDA can be supported by using the Raster Dataset or Table type.

  • All Bands
  • Multispectral
  • Panchromatic
  • Pan sharpen
  • Pan sharpen and Multispectral
  • Double Line Stereo
  • Three Line Stereo

Spectral range

TagBand orderWavelength (nm)Description

Pan FWD

1

500–800

FWD-Panchromatic

Pan BWD

1

500–800

BWD-Panchromatic

Pan

1

500–800

Panchromatic

MS

1

430–520

Blue

MS

2

520–600

Green

MS

3

630–690

Red

MS

4

760–900

Near infrared

Spectral range

ZY3-SASMAC

The ZY3-SASMAC raster type allows you to add raster data collected from the ZY-3 satellite and distributed by Satellite Surveying and Mapping Application Center (SASMAC).

Product typeProcessing templates
  • All
  • Level 1

Note:

Other types of product produced by SASMAC can be supported by using the Raster Dataset or Table type.

  • All Bands
  • Multispectral
  • Panchromatic
  • Pan sharpen
  • Pan sharpen and Multispectral
  • Double Line Stereo
  • Three Line Stereo

Spectral range

TagBand orderWavelength (nm)Description

Pan FWD

1

500–800

FWD-Panchromatic

Pan BWD

1

500–800

BWD-Panchromatic

Pan

1

500–800

Panchromatic

MS

1

430–520

Blue

MS

2

520–600

Green

MS

3

630–690

Red

MS

4

760–900

Near infrared

Spectral range

Related topics