Retire routes

Доступно с лицензией Location Referencing.

During the life span of a route, it may change as portions of the route are removed while others are added. Major changes, such as environmental concerns, age, erosion, or repair work, may require a portion of a route or the entire route to be retired for a specific period of time.

When you specify that a portion of a route should be retired, that portion is removed from the route in the LRS Network for the specified time frame. When a route is retired using the Retire Route tool, the route's To Date field in the LRS Network feature class is populated with the retirement date. When portions of a route are retired, the centerline features are split to accommodate the precise location of the retire operation. Calibration points are also added to ensure that the remainder of the route continues to calibrate properly.

The following are examples of route retirement scenarios:

In the first scenario, retirement is from the start of the route to the mid portion of the route. The route is not recalibrated downstream of the retirement, leaving the downstream measures intact.

Example 1: Routes and measures

From RouteRoute X

From Measure

0

To Measure

5

Recalibrate Downstream

No

Example 1 input: Routes and measures
Example 1 output: Routes and measures

In the second scenario, retirement is from the start of the route to the mid portion of the route. The route is recalibrated downstream of the retirement, and the downstream measures are updated. The start measure of the remaining route is updated to the same value as the start measure of the route before its retirement.

Example 2: Routes and measures

From RouteRoute X

From Measure

0

To Measure

5

Recalibrate Downstream

Yes

Example 2 input: Routes and measures
Example 2 output: Routes and measures

The following table lists the parameters used in the Retire Route tool:

ParameterDescription

Network

The network in which the routes exist.

Retire Date

The date when the retirement takes place.

Route ID

The route on which the retirement takes place.

From Measure

The measure on the route where the retirement starts. This is displayed as a green dot.

Use route start measure

The starting measure of the route.

To Measure

The measure on the target route where the retirement ends. This is displayed as a red dot.

Use route end measure

The ending measure of the target route.

Recalibrate route downstream

Choose this option to remove the length of the retired route from your overall set of measures.

Complete these steps to retire a route:

Примечание:

Gap calibration rules are followed when editing routes.

  1. Add the centerline and network feature class to a map.

    You can also open a map in which the centerline and network feature class is already present.

    Примечание:

    The information model expects only one centerline at any given location. Ensure that the centerlines you're using for your edit do not overlap other centerlines in your LRS.

    Примечание:

    Traditionally versioned networks must be edited through a direct connection to the geodatabase. Branch versioned networks, including any network configured with a user-generated route ID, must be edited through a feature service.

  2. Zoom in to the location where you want to retire the route.
  3. Click the Retire button Retire on the Location Referencing tab.

    The Retire Route pane appears.

  4. Choose the Network in which the retirement will take place.
    Примечание:

    To edit using feature services, the LRS Network must be published with the linear referencing and version management capabilities.

  5. Click the Calendar button Календарь next to the Retire Date text box and choose a retirement date.
    Подсказка:

    You can also double-click the Retire Date text box to automatically populate it with today's date or type a date in the Retire Date text box.

  6. Click the Choose route from map button Choose route from map next to the Route ID parameter and select a route to retire on the map.
  7. Provide the start measure value in the From Measure text box or click the Choose measure from map button Choose measure from map to select the start measure on the map.

    A green dot appears at the location of the start measure on the route.

    Подсказка:

    You can also check the Use route start measure check box to choose the start measure of the route.

  8. Provide the end measure value in the To Measure text box or click the Choose measure from map button Choose measure from map to select the end measure on the map.

    A red dot appears at the location of the end measure on the route.

    Подсказка:

    You can also check the Use route end measure check box to choose the end measure of the route.

    Примечание:

    Check the Recalibrate route downstream check box if you want to remove the length of the retired route from your overall set of measures.

    If the Recalibrate route downstream check box is not checked, the modified route gets its start measure from the end measure of the retired portion, and the end measure of the modified route remains unchanged.

    You can't retire the route if the From Measure and To Measure values for the route are the same.

  9. Click Run.

    The selected portion of the route is retired.

    Примечание:

    As a result of the retire route activity, only routes or portions of a route are retired; centerlines are not retired.

    Примечание:

    If a message about acquiring locks or reconciling appears, conflict prevention is enabled.

Retire routes in a line network with multifield route ID

Routes in a line network with multifield route ID can be retired as shown below. Line orders will be updated if needed.

The first example shows the before and after retirement at the beginning.

Example 1 input

Route IDLine Order

RouteX

100

RouteA

200

RouteY

300

The first part of RouteX at the beginning will be retired.

Before retirement at the beginning of a line

After retirement of the first part of RouteX, line order is updated. RouteA now has line order 100, while RouteX is now 200.

Example 1 output

Route IDLine Order

RouteA

100

RouteX

200

RouteY

300

After retirement at the beginning of a line

The second example shows before and after retirement at the end.

Example 2 input

Route IDLine Order

Route X

100

Route Y

200

The second part of RouteY will be retired.

Before retirement at the end of a line

Example 2 output

Route IDLine Order

Route X

100

Route Y

200

Line order is unaffected when retiring a route or part of a route at the end.

After retirement at the end of a line