Pixel Editor in ArcGIS Pro

Доступно с лицензией Image Analyst.

Pixel Editor contains a set of tools used to interactively manipulate pixel values for raster and imagery data. It allows you to edit an individual pixel or a group of pixels at one time. The types of operations that you can perform depend on the data source type of your raster dataset.

The Pixel Editor tools in ArcGIS Pro allow you to perform many editing tasks on your raster datasets, such as the following:

  • Edit elevation data to fill voids, remove spikes, or remove holes.
  • Reclassify pixels, regions, or objects.
  • Use preset filters to smooth areas.
  • Obscure or redact confidential pixels.
  • Remove above ground features to create a bare earth elevation surface.
  • Replace a cloudy region with another region of pixels.

Примечание:

Only raster datasets can be edited using Pixel Editor. Raster products, mosaic datasets, and image services are not supported.

Pixel Editor tab

Pixel Editor only edits one raster dataset per map view. To start Pixel Editor for the current map view, click the layer you want to edit in the Contents pane, and click the Pixel Editor button Запустить Редактор пикселов on the Imagery tab. Pixel Editor keeps its focus on the raster layer that was used to enable it. To edit another layer, click Close Закрыть on the Pixel Editor tab first. Then select the other layer in the Contents pane that you want to work with and click Pixel Editor. The Pixel Editor tab gives you access to all the available tools you can use on that type of raster dataset. Some of the tools will open the Pixel Editor Operations pane, where you can perform tasks on the same region of pixels, or the same task on different activated regions of pixels.

The type of raster data source determines which operations can be performed on your raster dataset. To ensure that your raster dataset will have the proper operations available to it, check and set the Source Type of the raster on the dataset properties. In the Catalog pane, right-click your raster dataset, and click Properties. Under the Raster Information section, check the value for Source Type. For digital elevation models (DEM), digital terrain models (DTM), or digital surface models (DSM), choose Elevation. For thematic or classified rasters, choose Thematic. For all other multispectral or panchromatic raster imagery, choose Generic.

There are two kinds of pixel editing tools: quick edit tools and more complex Operations tools. The quick edit tools immediately perform the edit on your raster layer. The Operations tools have parameters that you need to set to perform the operation. Once you set the parameters in these operations, click Apply to perform the edit.

В группу Захват входят Копировать регион Копировать регион и Заменить регион Заменить регион. Эти инструменты копируют или заменяют пикселы из того же или другого набора данных карты. Если используется другой набор данных с карты, воспользуйтесь ниспадающим списком Исходный слой, чтобы задать соответствующий слой карты; этот слой должен иметь ту же глубину пикселов, что и редактируемый растр. Целевой слой всегда соответствует редактируемому набору растровых данных.

В группе Проверка содержатся инструменты, которые работают с данными высот. Определить местоположения выбросов Определить местоположение выбросов подсвечивает пикселы, которые статистически отклоняются от нормальных значений в пределах выбранного региона интереса. Значения пикселов, которые находятся в трех и более стандартных отклонениях от нормального диапазона значений, считаются выбросами. Когда выбросы будут определены, вы сможете инструмент Фильтр выбросов Фильтр выбросов, чтобы удалить эти аномалии из данных высот. Найти минимум и максимум Найти минимум и максимум подсвечивает минимальное и максимальное значения в рамках выбранного региона интереса. Минимальные пикселы отображаются зеленым цветом, а максимальные - красным. Чтобы снять выборку с пикселов, определенных с помощью Найти местоположения выбросов или Найти минимум и максимум, нажмите кнопку Очистить выборку пикселов Очистить поиск в группе Проверка. Отмывка рельефа Цветная отмывка позволяет визуализировать данные высот в их естественном виде, либо в виде отмывки рельефа. Отмывка рельефа может помочь вам определить резкие изменения или мелкие изменения в рельефе, которые трудно визуализируются в цифровой модели рельефа (ЦМР).

Представление ЦМР
Представление ЦМР в виде отмывки рельефа

The Region group includes various tools to draw or select regions that you want to inspect or edit; regions only perform edits on operations. Region Color allows you to choose the color that will be used to draw your region; keep in mind that the selected region will be highlighted in cyan. Retain Region Сохранить регионы will keep all of the regions that you create. When the Retain Region button is turned off, the previously created region will be cleared each time you create a region. The Region Mode drop-down arrow allows you to create a region or edit an existing region. The Region drop-down arrow allows you to choose the tool to create or edit an area of interest. You can create as many regions as you want, but editing is only performed on the currently selected region. The selected region is the area that is highlighted in cyan. Use Select Выбрать регион to choose the region you want to work on. Use Zoom Масштабировать to zoom into the selected region. Use Clear Selection Очистить выборку to unselect the region. The Region Visibility check box allows you to turn off the visibility of the region outlines; this allows you to see raster edits at the edge of the region. Remove Удаление removes the currently selected region. Remove All Удалить все removes all the regions in your map.

You can use the following four Region Mode options to help you create or edit your region:

  • New Задать новый регион—Use this mode to create a region.
  • Add To Добавить к региону—Use this mode to edit an existing region by adding to the selected region.
  • Remove From Удалить из региона—Use this mode to edit an existing region by removing some of the region.
  • Intersect Пересечь регион—Use this mode to create a region only where the regions all intersect.

There are six Region tools as follows:

  • Rectangle Нарисовать скетч прямоугольника—Draw a rectangle to create a new region or edit an existing region.
  • Polygon Нарисовать скетч полигона—Draw a polygon to create a new region or edit an existing region.
  • Lasso Нарисовать скетч лассо—Draw a free-form shape to create a new region or edit an existing region.
  • Circle Нарисовать скетч круга—Draw a circle to create a new region or edit an existing region.
  • Feature to Region Объект в регион—Select an existing feature to create or modify an existing region.
  • Segment to Region Сегмент в регион—Select a segment to create or modify an existing region.

The Edit group provides you with the tools you can use to edit an area of interest interactively. The tools that are available depend on the data source type you are editing. Imagery, such as multispectral and panchromatic, will have different editing capabilities than thematic data or elevation data.

Кнопку Отмена Отменить можно использовать для отмена последнего действия, выполненного с помощью инструментов на вкладке Редактор пикселов. Отмену также можно выполнить, нажав Ctrl+Z; это сочетание горячих клавиш также можно использовать для отмены действий, которые были сделаны на панели Операции Редактора пикселов. Кнопку Повтор Повторить можно использовать для отмена последнего действия, выполненного с помощью инструментов на вкладке Редактор пикселов. Повтор действия также можно выполнить, нажав Ctrl+Y; это сочетание горячих клавиш также можно использовать для повтора действий, которые были сделаны на панели Операции Редактора пикселов.

The Edits Log displays the list of the edits that you performed on your raster dataset layer. For more information about the Edits Log, see Edits Log tab.

The Save group gives you the option to save or discard your edits. The Discard button Отклонить изменения will undo all of the edits that you performed and are not committed yet. The Save button Сохранить allows you to commit your edits to the current layer that you are editing. The Save as New button Сохранить как allows you to save your edits to a new raster dataset. This is helpful if you do not want to overwrite your source data, or your data source is a format that is not writable.

Примечание:

It is recommended that edits to datasets in .MRF format be saved to a new raster dataset. See Overwriting an MRF for more details.

Связанные разделы


В этом разделе
  1. Pixel Editor tab