Event behavior for route reversal

Доступно с лицензией Location Referencing.

When one or more routes are reversed, events are impacted depending on the configured event behavior for the event layer.

Примечание:

Events are not updated until the Apply Event Behaviors tool is applied after route edits. If you are using conflict prevention, you are prompted to run Apply Event Behaviors before posting can be completed.

Примечание:

When recalibrate downstream is chosen for an LRS route edit, the configured calibrate event behavior is applied to downstream sections.

Route reversal scenario

The following route reversal scenario involves one route and two events:

Before route reversal

Stay Put behavior

The geographic location of the events is preserved; the measures are changed.

Stay Put behavior

Move behavior

The event measures on the route are maintained; the geographic location is changed.

Move behavior

Retire behavior

The geographic location and measure of the events are preserved; the events are retired.

Retire behavior

Detailed behavior results

The following sections detail how event behavior rules are enforced when a route is reversed.

Stay Put behavior

If the route is active from 1/1/2000 and the reversal is set to occur on 1/1/2005, this has the following effects:

  • Event1 is represented by two time slices. There is a time slice from 1/1/2000 to 1/1/2005, with the original measures from 5 to 12, and a time slice of 1/1/2005 to <Null>, with the measures 8 to 15 in the reverse direction.
  • Event2 is represented by two time slices. There is a time slice from 1/1/2000 to 1/1/2005, with the original measures from 12 to 20, and a time slice of 1/1/2005 to <Null> with the measures 0 to 8 in the reverse direction.

Before Stay Put event behavior

The following diagram provides details about the route before reversal:

Before Stay Put event behavior

The following table provides details about the events before reversal:

EventRoute NameFrom DateTo DateFrom MeasureTo Measure

Event1

Route1

1/1/2000

<Null>

5

12

Event2

Route1

1/1/2000

<Null>

12

20

After Stay Put event behavior

The following diagram provides details about the route after reversal:

After Stay Put event behavior

The following table provides details about the events after reversal when Stay Put is the configured event behavior:

EventRoute NameFrom DateTo DateFrom MeasureTo MeasureLocation Error

Event1

Route1

1/1/2000

1/1/2005

5

12

No Error

Event1

Route1

1/1/2005

<Null>

8

15

No Error

Event2

Route1

1/1/2000

1/1/2005

12

20

No Error

Event2

Route1

1/1/2005

<Null>

0

8

No Error

Move behavior

If the route is active from 1/1/2000 and the reversal is set to occur on 1/1/2005, this has the following effects:

  • Event1 is represented by two time slices. There is a time slice from 1/1/2000 to 1/1/2005, with the original measures from 5 to 12, and a time slice of 1/1/2005 to <Null>, with the same measures but in the reverse direction.
  • Event2 is represented by two time slices. There is a time slice from 1/1/2000 to 1/1/2005, with the original measures from 12 to 20, and a time slice of 1/1/2005 to <Null> with the same measures but in the reverse direction.

Before Move event behavior

The following diagram provides details about the route before reversal:

Before Move event behavior

The following table provides details about the events before reversal:

EventRoute NameFrom DateTo DateFrom MeasureTo Measure

Event1

Route1

1/1/2000

<Null>

5

12

Event2

Route1

1/1/2000

<Null>

12

20

After Move event behavior

The following diagram provides details about the route after reversal:

After Move event behavior

The following table provides details about the events after reversal when Move is the configured event behavior:

EventRoute NameFrom DateTo DateFrom MeasureTo MeasureLocation Error

Event1

Route1

1/1/2000

1/1/2005

5

12

No Error

Event1

Route1

1/1/2005

<Null>

5

12

No Error

Event2

Route1

1/1/2000

1/1/2005

12

20

No Error

Event2

Route1

1/1/2005

<Null>

12

20

No Error

Retire behavior

If the realignment is set to occur on 1/1/2005 and the route reversal is set to occur on 1/1/2005, this has the following effects:

  • Event1 retires.
  • Event2 retires.

Before Retire event behavior

The following diagram provides details about the routes before reversal:

Before Retire event behavior

The following table provides details about the events before reversal:

EventRoute NameFrom DateTo DateFrom MeasureTo Measure

Event1

Route1

1/1/2000

<Null>

5

12

Event2

Route1

1/1/2000

<Null>

12

20

After Retire event behavior

The following diagram provides details about the route after reversal:

After Retire event behavior

The following table provides details about the events after reversal when Retire is the configured event behavior:

EventRoute NameFrom DateTo DateFrom MeasureTo Measure

Event1

Route1

1/1/2000

1/1/2005

5

12

Event2

Route1

1/1/2000

1/1/2005

12

20

Detailed route reversal behavior on routes in a line network with events that span routes

The following sections detail how event behavior rules are enforced when a route in a line network is reversed. In this example, the routes are reversed, including the intermediate route (Route2) between the from route (Route1) and to route (Route3). There are two events (Event1 and Event2) that are impacted by route reversal.

Stay Put behavior

The routes are active from 1/1/2000, and if the reversal is set to occur on 1/1/2005, this has the following effects:

  • Event1 is represented by two time slices. There is a time slice from 1/1/2000 to 1/1/2005, with measures from 7 on Route1 to 18 on Route2, and a time slice from 1/1/2005 to <Null>, with measures from 22 on Route2 to 3 on Route1.
  • Event2 is represented by two time slices. There is a time slice from 1/1/2000 to 1/1/2005, with measures from 18 on Route 2 to 35 on Route3, and a time slice from 1/1/2005 to <Null>, with measures from 35 on Route 3 to 20 on Route2.

Before Stay Put event behavior

The following diagram provides details about the routes before reversal:

Before Stay Put event behavior

The following table provides details about the events before reversal:

Event IDFrom DateTo DateFrom RouteIDFrom MeasureTo RouteIDTo Measure

Event1

1/1/2000

<Null>

Route1

7

Route2

18

Event2

1/1/2000

<Null>

Route2

18

Route3

35

After Stay Put event behavior

The following diagram provides details about the routes after reversal:

After Stay Put event behavior

The following table provides details about the events after reversal when Stay Put is the configured event behavior:

Event IDFrom DateTo DateFrom RouteIDFrom MeasureTo RouteIDTo MeasureLocation Error

Event1

1/1/2000

1/1/2005

Route1

7

Route2

18

No Error

Event1

1/1/2005

<Null>

Route2

22

Route1

3

No Error

Event2

1/1/2000

1/1/2005

Route2

18

Route3

35

No Error

Event2

1/1/2005

<Null>

Route3

35

Route2

22

No Error

Move behavior

The route is active from 1/1/2000, and if the reversal is set to occur on 1/1/2005, this has the following effects:

  • Event1 is represented by two time slices. There is a time slice from 1/1/2000 to 1/1/2005, with measures from 7 on Route1 to 18 on Route2, and a time slice from 1/1/2005 to <Null>, with measures from 18 on Route2 to 7 on Route1.
  • Event2 is represented by two time slices. There is a time slice from 1/1/2000 to 1/1/2005, with measures from 18 on Route 2 to 35 on Route3, and a time slice from 1/1/2005 to <Null>, with measures from 35 on Route 3 to 18 on Route2.

Before Move event behavior

The following diagram provides details about the routes before reversal:

Before Move event behavior

The following table provides details about the events before reversal:

Event IDFrom DateTo DateFrom RouteIDFrom MeasureTo RouteIDTo Measure

Event1

1/1/2000

<Null>

Route1

7

Route2

18

Event2

1/1/2000

<Null>

Route2

18

Route3

35

After Move event behavior

The following diagram provides details about the routes after reversal:

After Move event behavior

The following table provides details about the events after reversal when Move is the configured event behavior:

Event IDFrom DateTo DateFrom RouteIDFrom MeasureTo RouteIDTo MeasureLocation Error

Event1

1/1/2000

1/1/2005

Route1

7

Route2

18

No Error

Event1

1/1/2005

<Null>

Route2

18

Route1

7

No Error

Event2

1/1/2000

1/1/2005

Route2

18

Route3

35

No Error

Event2

1/1/2005

<Null>

Route3

35

Route2

18

No Error

Retire behavior

The routes are active from 1/1/2000, and if the reversal is set to occur on 1/1/2005, this has the following effects:

  • Event1 retires.
  • Event2 retires.

Before Retire event behavior

The following diagram provides details about the routes before reversal:

Before Retire event behavior

The following table provides details about the events before reversal:

Event IDFrom DateTo DateFrom RouteIDFrom MeasureTo RouteIDTo Measure

Event1

1/1/2000

<Null>

Route1

5

Route2

20

Event2

1/1/2000

<Null>

Route2

20

Route3

35

After Retire event behavior

The following diagram provides details about the routes after reversal:

After Retire event behavior

The following table provides details about the events after reversal when Retire is the configured event behavior:

Event IDFrom DateTo DateFrom RouteIDFrom MeasureTo RouteIDTo Measure

Event1

1/1/2000

1/1/2005

Route1

5

Route2

20

Event2

1/1/2000

1/1/2005

Route2

20

Route3

35