| Подпись | Описание | Тип данных |
Входной файл | Входной файл, который будет сканироваться для поиска местоположений (координат или пользовательских местоположений), дат и пользовательских атрибутов; или папка, все файлы которой будут сканироваться для поиска местоположений. | File |
Выходной класс объектов | The feature class containing point features that represent the locations that were found. | Feature Class |
Входной шаблон (Дополнительный) | The template file (*.lxttmpl) that determines the setting to use for each tool parameter. When a template file is provided, all values specified for other parameters will be ignored except those that determine the input content that will be processed and the output feature class. Some settings that are available in the Extract Locations pane are only available to this tool when the settings are saved to a template file, and the template file is referenced in this parameter. These settings are as follows:
| File |
Широта и долгота (Дополнительный) | Specifies whether to search for coordinates stored as decimal degrees formatted as latitude and longitude (infrequent false positives). Examples are: 33.8N 77.035W and W77N38.88909.
| Boolean |
X Y с символами градуса (Дополнительный) | Specifies whether to search for coordinates stored as decimal degrees formatted as X Y with degree symbols (infrequent false positives). Examples are: 38.8° -77.035° and -077d+38.88909d.
| Boolean |
X Y без символов (Дополнительный) | Specifies whether to search for coordinates stored as decimal degrees formatted as X Y with no symbols (frequent false positives). Examples are: 38.8 -77.035 and -077.0, +38.88909.
| Boolean |
Широта и долгота (Дополнительный) | Specifies whether to search for coordinates stored as degrees decimal minutes formatted as latitude and longitude (infrequent false positives). Examples are: 3853.3N 7702.100W and W7702N3853.3458.
| Boolean |
X Y с символами минут (Дополнительный) | Specifies whether to search for coordinates stored as degrees decimal minutes formatted as X Y with minutes symbols (infrequent false positives). Examples are: 3853' -7702.1' and -07702m+3853.3458m.
| Boolean |
Широта и долгота (Дополнительный) | Specifies whether to search for coordinates stored as degrees minutes seconds formatted as latitude and longitude (infrequent false positives). Examples are: 385320.7N 770206.000W and W770206N385320.76.
| Boolean |
X Y с символами секунд (Дополнительный) | Specifies whether to search for coordinates stored as degrees minutes seconds formatted as X Y with seconds symbols (infrequent false positives). Examples are: 385320" -770206.0" and -0770206.0s+385320.76s.
| Boolean |
X Y с разделителями (Дополнительный) | Specifies whether to search for coordinates stored as degrees minutes seconds formatted as X Y with separators (moderate false positives). Examples are: 38:53:20 -77:2:6.0 and -077/02/06/+38/53/20.76.
| Boolean |
Universal Transverse Mercator (Дополнительный) | Specifies whether to search for Universal Transverse Mercator (UTM) coordinates (infrequent false positives). Examples are: 18S 323503 4306438 and 18 north 323503.25 4306438.39.
| Boolean |
UPS North Polar (Дополнительный) | Specifies whether to search for Universal Polar Stereographic (UPS) coordinates in the north polar area (infrequent false positives). Examples are: Y 2722399 2000000 and north 2722399 2000000.
| Boolean |
UPS South Polar (Дополнительный) | Specifies whether to search for Universal Polar Stereographic (UPS) coordinates in the south polar area (infrequent false positives). Examples are: A 2000000 3168892 and south 2000000 3168892.
| Boolean |
Military Grid Reference System (Военная система прямоугольных координат). (Дополнительный) | Specifies whether to search for Military Grid Reference System (MGRS) coordinates (infrequent false positives). Examples are: 18S UJ 13503 06438 and 18SUJ0306.
| Boolean |
North Polar (Дополнительный) | Specifies whether to search for Military Grid Reference System (MGRS) coordinates in the north polar area (infrequent false positives). Examples are: Y TG 56814 69009 and YTG5669.
| Boolean |
South Polar (Дополнительный) | Specifies whether to search for Military Grid Reference System (MGRS) coordinates in the south polar area (moderate false positives). Examples are: A TN 56814 30991 and ATN5630.
| Boolean |
Использовать запятую как разделитель десяток (Дополнительный) | Specifies whether a comma (,) will be recognized as a decimal separator. By default, content is scanned for spatial coordinates defined by numbers that use a period (.) or a middle dot (·) as the decimal separator, for example: Lat 01° 10·80’ N Long 103° 28·60’ E. If you are working with content in which spatial coordinates are defined by numbers that use a comma (,) as the decimal separator, for example: 52° 8′ 32,14″ N; 5° 24′ 56,09″ E, set this parameter to recognize a comma as the decimal separator instead. This parameter is not set automatically based on the regional setting for your computer's operating system.
| Boolean |
Интерпретировать как долготу, широту (Дополнительный) | Specifies whether x,y coordinates will be interpreted as longitude-latitude. When numbers resemble x,y coordinates, both numbers are less than 90, and there are no symbols or notations to indicate which number represents the latitude or longitude, results can be ambiguous. Interpret the numbers as a longitude-latitude coordinate (x,y) instead of a latitude-longitude coordinate (y,x).
| Boolean |
Входная система координат (Дополнительный) | The coordinate system that will be used to interpret the spatial coordinates defined in the input. GCS-WGS-84 is the default. | Spatial Reference |
Входные пользовательские местоположения (Дополнительный) | The custom location file (.lxtgaz) that will be used when scanning the input content. A point is created to represent each occurrence of each place name in the custom location file up to the limits established by other tool parameters. | File |
Использовать нечеткое совпадение (Дополнительный) | Specifies whether fuzzy matching will be used when comparing the input content to the place names specified in the custom location file.
| Boolean |
Максимальное число извлеченных объектов
(Дополнительный) | The maximum number of features that can be extracted. The tool will stop scanning the input content for locations when the maximum number is reached. When running as a geoprocessing service, the service and the server may have separate limits on the number of features allowed. | Long |
Игнорировать это первое число объектов (Дополнительный) | The number of features detected and ignored before extracting all other features. This parameter can be used to focus the search on a specific portion of the data. | Long |
Использованное имя месяца (Дополнительный) | Specifies whether to search for dates in which the month name appears (infrequent false positives). 12 May 2003 and January 15, 1997 are examples.
| Boolean |
М/Д/Г и Д/М/Г (Дополнительный) | Specifies whether to search for dates in which numbers are in the M/D/Y or D/M/Y format (moderate false positives). 5/12/03 and 1-15-1997 are examples.
| Boolean |
ГГГГММДД (Дополнительный) | Specifies whether to search for dates in which numbers are in the YYYYMMDD format (moderate false positives). 20030512 and 19970115 are examples.
| Boolean |
ГГММДД (Дополнительный) | Specifies whether to search for dates in which numbers are in the YYMMDD format (frequent false positives). 030512 and 970115 are examples.
| Boolean |
YYJJJ (Дополнительный) | Specifies whether to search for dates in which numbers are in the YYJJJ or YYYYJJJ format (frequent false positives). 03132 and 97015 are examples.
| Boolean |
Максимальное число извлеченных дат
(Дополнительный) | The maximum number of dates that will be extracted. | Long |
Игнорировать это первое число дат
(Дополнительный) | The number of dates that will be detected and ignored before extracting all other dates. | Long |
Самая ранняя дата допустимого диапазона дат
(Дополнительный) | The earliest acceptable date to extract. Detected dates matching this value or later will be extracted. | Date |
Самая поздняя дата допустимого диапазона дат
(Дополнительный) | The latest acceptable date to extract. Detected dates matching this value or earlier will be extracted. | Date |
Входные пользовательские атрибуты
(Дополнительный) | The custom attribute file (.lxtca) that will be used to scan the input content. Fields will be created in the output feature class's attribute table for all custom attributes defined in the file. When the input content is scanned, it will be examined to see if it contains text associated with all custom attributes specified in the file. When a match is found, the appropriate text is extracted from the input content and stored in the appropriate field. | File |
Текст ссылки на входной файл (Дополнительный) | The file path that will be used as the file name in the output data when the Input File parameter (in_file in Python) is transferred to the server. If this parameter is not specified, the path of the Input File will be used, which may be an unreachable folder on a server. This parameter has no effect when the Input File is not specified. | String |
Дата и время входного файла
(Дополнительный) | The UTC date and time that the file was modified will be used as the modified attribute in the output data when the Input File parameter (in_file in Python) is transferred to the server. If this parameter is not specified, the current modified time of the input file will be used. This parameter has no effect when the Input File is not specified. | Date |
Длина поля предварительного текста (Дополнительный) | Content is extracted from the input document to provide context for the location that was found. This parameter defines the maximum number of characters that will be extracted preceding the text that defines the location. The extracted text is stored in the Pre-Text field in the output feature class's attribute table. The default is 254. The Pre-Text field's data type will also have this length. The length of a text field in a shapefile is limited to 254 characters; when the output is a shapefile, a larger number of characters will be truncated to 254. | Long |
Длина поля завершающего текста (Дополнительный) | Content is extracted from the input document to provide context for the location that was found. This parameter defines the maximum number of characters that will be extracted following the text that defines the location. The extracted text is stored in the Post-Text field in the output feature class's attribute table. The default is 254. The Post-Text field's data type will also have this length. The length of a text field in a shapefile is limited to 254 characters; when the output is a shapefile, a larger number of characters will be truncated to 254. | Long |
Формат координат (Дополнительный) | Specifies the coordinate format that will be used to store the coordinate location. A standard representation of the spatial coordinate that defines the point feature is recorded in a field in the attribute table.
| String |
Необходимы разделители слов (Дополнительный) | Specifies whether to search for text using word breaks. A word break occurs when words (text) are bounded by whitespace or punctuation characters as in European languages. This setting can produce frequent false positives or infrequent false positives depending on the language of the text. For example, when word breaks are not required, the English text Bernard will produce a match against the text San Bernardino, which would likely be considered a false positive. However, when text is written using a language that does not use word breaks, you cannot find words if word breaks are required. For example, with the text I flew to Tokyo in Japanese, 私は東京に飛んで, you would only be able to find the word Tokyo, 東京, when word breaks are not required.
| Boolean |
Доступно с лицензией LocateXT.
Краткая информация
Анализирует документы, содержащие неструктурированный или полуструктурированный текст, например сообщения электронной почты, путевые бланки и т.д., и извлекает местоположения в точечный класс пространственных объектов.
Инструмент анализирует и обрабатывает входные документы следующим образом:
- Распознает пространственные координаты, указанные в документе, и создает точки, представляющие эти местоположения. Распознаются следующие форматы координат: десятичные градусы, градусы десятичные минуты, градусы минуты секунды, Universal Transverse Mercator и Military Grid Reference System.
- Распознает имена мест в содержимом документа, определенных в пользовательском файле местоположений, и создает точки, представляющие эти местоположения. Пользовательский файл местоположений связывает название места с пространственной координатой, представляющей это местоположение.
- Распознает интересующий текст, извлекает эту информацию из документа и записывает ее в поля таблицы атрибутов выходного класса пространственных объектов.
Этот инструмент поддерживает все документы Microsoft Office (Word, PowerPoint и Excel); документы Adobe PDF; текст с разметкой, например, документы XML и HTML; и любые файлы, содержащие простой текст, например текстовые файлы (.txt).
Использование
The parameter default values are designed to optimize the identification of coordinates and dates. Default values can be modified for each parameter. The fewer parameters that are modified, the faster the tool will run.
All coordinate formats are on by default. If you want to extract custom locations only and do not want to extract spatial coordinates, turn off the coordinate format parameters.
If an Adobe PDF document is provided as input and its content includes a spatial coordinate in a format that is turned on, and the output feature class does not contain a feature representing the spatial coordinate, your computer may not have a component that is required to process PDF documents.
When you use a custom location file to extract place names, it is a best practice to specify fewer place names in the file. For example, if you convert a feature class representing all places in the world to a custom location file, the process can take a lot of time looking for places that are unlikely to be present or are in areas of the world in which you are not interested for your analysis.
When the place names in which you are interested can be misspelled or have known variations, you will typically get better results by specifying common misspellings and alternate place names in the custom location file instead of using fuzzy matching. When fuzzy matching is turned on, you will get an output location if 70 percent of the characters in a place name have a match with the input content. This can produce more false positives than if you provide known alternates and misspellings.
A useful workflow for fuzzy matching is to first run the tool with fuzzy matching turned off. Then, run the tool again with fuzzy matching turned on and check the results. This can help you identify spelling variations that can be added to a custom locations file.
Параметры
arcpy.conversion.ExtractLocationsDocument(in_file, out_feature_class, {in_template}, {coord_dd_latlon}, {coord_dd_xydeg}, {coord_dd_xyplain}, {coord_dm_latlon}, {coord_dm_xymin}, {coord_dms_latlon}, {coord_dms_xysec}, {coord_dms_xysep}, {coord_utm}, {coord_ups_north}, {coord_ups_south}, {coord_mgrs}, {coord_mgrs_northpolar}, {coord_mgrs_southpolar}, {comma_decimal}, {coord_use_lonlat}, {in_coor_system}, {in_custom_locations}, {fuzzy_match}, {max_features_extracted}, {ignore_first_features}, {date_monthname}, {date_m_d_y}, {date_yyyymmdd}, {date_yymmdd}, {date_yyjjj}, {max_dates_extracted}, {ignore_first_dates}, {date_range_begin}, {date_range_end}, {in_custom_attributes}, {file_link}, {file_mod_datetime}, {pre_text_length}, {post_text_length}, {std_coord_fmt}, {req_word_breaks})| Имя | Описание | Тип данных |
in_file | Входной файл, который будет сканироваться для поиска местоположений (координат или пользовательских местоположений), дат и пользовательских атрибутов; или папка, все файлы которой будут сканироваться для поиска местоположений. | File |
out_feature_class | The feature class containing point features that represent the locations that were found. | Feature Class |
in_template (Дополнительный) | The template file (*.lxttmpl) that determines the setting to use for each tool parameter. When a template file is provided, all values specified for other parameters will be ignored except those that determine the input content that will be processed and the output feature class. Some settings that are available in the Extract Locations pane are only available to this tool when the settings are saved to a template file, and the template file is referenced in this parameter. These settings are as follows:
| File |
coord_dd_latlon (Дополнительный) | Specifies whether to search for coordinates stored as decimal degrees formatted as latitude and longitude (infrequent false positives). Examples are: 33.8N 77.035W and W77N38.88909.
| Boolean |
coord_dd_xydeg (Дополнительный) | Specifies whether to search for coordinates stored as decimal degrees formatted as X Y with degree symbols (infrequent false positives). Examples are: 38.8° -77.035° and -077d+38.88909d.
| Boolean |
coord_dd_xyplain (Дополнительный) | Specifies whether to search for coordinates stored as decimal degrees formatted as X Y with no symbols (frequent false positives). Examples are: 38.8 -77.035 and -077.0, +38.88909.
| Boolean |
coord_dm_latlon (Дополнительный) | Specifies whether to search for coordinates stored as degrees decimal minutes formatted as latitude and longitude (infrequent false positives). Examples are: 3853.3N 7702.100W and W7702N3853.3458.
| Boolean |
coord_dm_xymin (Дополнительный) | Specifies whether to search for coordinates stored as degrees decimal minutes formatted as X Y with minutes symbols (infrequent false positives). Examples are: 3853' -7702.1' and -07702m+3853.3458m.
| Boolean |
coord_dms_latlon (Дополнительный) | Specifies whether to search for coordinates stored as degrees minutes seconds formatted as latitude and longitude (infrequent false positives). Examples are: 385320.7N 770206.000W and W770206N385320.76.
| Boolean |
coord_dms_xysec (Дополнительный) | Specifies whether to search for coordinates stored as degrees minutes seconds formatted as X Y with seconds symbols (infrequent false positives). Examples are: 385320" -770206.0" and -0770206.0s+385320.76s.
| Boolean |
coord_dms_xysep (Дополнительный) | Specifies whether to search for coordinates stored as degrees minutes seconds formatted as X Y with separators (moderate false positives). Examples are: 8:53:20 -77:2:6.0 and -077/02/06/+38/53/20.76.
| Boolean |
coord_utm (Дополнительный) | Specifies whether to search for Universal Transverse Mercator (UTM) coordinates (infrequent false positives). Examples are: 18S 323503 4306438 and 18 north 323503.25 4306438.39.
| Boolean |
coord_ups_north (Дополнительный) | Specifies whether to search for Universal Polar Stereographic (UPS) coordinates in the north polar area (infrequent false positives). Examples are: Y 2722399 2000000 and north 2722399 2000000.
| Boolean |
coord_ups_south (Дополнительный) | Specifies whether to search for Universal Polar Stereographic (UPS) coordinates in the south polar area (infrequent false positives). Examples are: A 2000000 3168892 and south 2000000 3168892.
| Boolean |
coord_mgrs (Дополнительный) | Specifies whether to search for Military Grid Reference System (MGRS) coordinates (infrequent false positives). Examples are: 18S UJ 13503 06438 and 18SUJ0306.
| Boolean |
coord_mgrs_northpolar (Дополнительный) | Specifies whether to search for Military Grid Reference System (MGRS) coordinates in the north polar area (infrequent false positives). Examples are: Y TG 56814 69009 and YTG5669.
| Boolean |
coord_mgrs_southpolar (Дополнительный) | Specifies whether to search for Military Grid Reference System (MGRS) coordinates in the south polar area (moderate false positives). Examples are: A TN 56814 30991 and ATN5630.
| Boolean |
comma_decimal (Дополнительный) | Specifies whether a comma (,) will be recognized as a decimal separator. By default, content is scanned for spatial coordinates defined by numbers that use a period (.) or a middle dot (·) as the decimal separator, for example: Lat 01° 10·80’ N Long 103° 28·60’ E. If you are working with content in which spatial coordinates are defined by numbers that use a comma (,) as the decimal separator, for example: 52° 8′ 32,14″ N; 5° 24′ 56,09″ E, set this parameter to recognize a comma as the decimal separator instead. This parameter is not set automatically based on the regional setting for your computer's operating system.
| Boolean |
coord_use_lonlat (Дополнительный) | When numbers resemble x,y coordinates, both numbers are less than 90, and there are no symbols or notations to indicate which number represents the latitude or longitude, results can be ambiguous. Interpret the numbers as a longitude-latitude coordinate (x,y) instead of a latitude-longitude coordinate (y,x).
| Boolean |
in_coor_system (Дополнительный) | The coordinate system that will be used to interpret the spatial coordinates defined in the input. GCS-WGS-84 is the default. | Spatial Reference |
in_custom_locations (Дополнительный) | The custom location file (.lxtgaz) that will be used when scanning the input content. A point is created to represent each occurrence of each place name in the custom location file up to the limits established by other tool parameters. | File |
fuzzy_match (Дополнительный) | Specifies whether fuzzy matching will be used for searching the custom location file.
| Boolean |
max_features_extracted (Дополнительный) | The maximum number of features that can be extracted. The tool will stop scanning the input content for locations when the maximum number is reached. When running as a geoprocessing service, the service and the server may have separate limits on the number of features allowed. | Long |
ignore_first_features (Дополнительный) | The number of features detected and ignored before extracting all other features. This parameter can be used to focus the search on a specific portion of the data. | Long |
date_monthname (Дополнительный) | Specifies whether to search for dates in which the month name appears (infrequent false positives). 12 May 2003 and January 15, 1997 are examples.
| Boolean |
date_m_d_y (Дополнительный) | Specifies whether to search for dates in which numbers are in the M/D/Y or D/M/Y format (moderate false positives). 5/12/03 and 1-15-1997 are examples.
| Boolean |
date_yyyymmdd (Дополнительный) | Specifies whether to search for dates in which numbers are in the YYYYMMDD format (moderate false positives). 20030512 and 19970115 are examples.
| Boolean |
date_yymmdd (Дополнительный) | Specifies whether to search for dates in which numbers are in the YYMMDD format (frequent false positives). 030512 and 970115 are examples.
| Boolean |
date_yyjjj (Дополнительный) | Specifies whether to search for dates in which numbers are in the YYJJJ or YYYYJJJ format (frequent false positives). 03132 and 97015 are examples.
| Boolean |
max_dates_extracted (Дополнительный) | The maximum number of dates that will be extracted. | Long |
ignore_first_dates (Дополнительный) | The number of dates that will be detected and ignored before extracting all other dates. | Long |
date_range_begin (Дополнительный) | The earliest acceptable date to extract. Detected dates matching this value or later will be extracted. | Date |
date_range_end (Дополнительный) | The latest acceptable date to extract. Detected dates matching this value or earlier will be extracted. | Date |
in_custom_attributes (Дополнительный) | The custom attribute file (.lxtca) that will be used to scan the input content. Fields will be created in the output feature class's attribute table for all custom attributes defined in the file. When the input content is scanned, it will be examined to see if it contains text associated with all custom attributes specified in the file. When a match is found, the appropriate text is extracted from the input content and stored in the appropriate field. | File |
file_link (Дополнительный) | The file path that will be used as the file name in the output data when the Input File parameter (in_file in Python) is transferred to the server. If this parameter is not specified, the path of the Input File will be used, which may be an unreachable folder on a server. This parameter has no effect when the Input File is not specified. | String |
file_mod_datetime (Дополнительный) | The UTC date and time that the file was modified will be used as the modified attribute in the output data when the Input File parameter (in_file in Python) is transferred to the server. If this parameter is not specified, the current modified time of the input file will be used. This parameter has no effect when the Input File is not specified. | Date |
pre_text_length (Дополнительный) | Content is extracted from the input document to provide context for the location that was found. This parameter defines the maximum number of characters that will be extracted preceding the text that defines the location. The extracted text is stored in the Pre-Text field in the output feature class's attribute table. The default is 254. The Pre-Text field's data type will also have this length. The length of a text field in a shapefile is limited to 254 characters; when the output is a shapefile, a larger number of characters will be truncated to 254. | Long |
post_text_length (Дополнительный) | Content is extracted from the input document to provide context for the location that was found. This parameter defines the maximum number of characters that will be extracted following the text that defines the location. The extracted text is stored in the Post-Text field in the output feature class's attribute table. The default is 254. The Post-Text field's data type will also have this length. The length of a text field in a shapefile is limited to 254 characters; when the output is a shapefile, a larger number of characters will be truncated to 254. | Long |
std_coord_fmt (Дополнительный) | Specifies the coordinate format that will be used to store the coordinate location. A standard representation of the spatial coordinate that defines the point feature is recorded in a field in the attribute table.
| String |
req_word_breaks (Дополнительный) | Specifies whether to search for text using word breaks. A word break occurs when words (text) are bounded by whitespace or punctuation characters as in European languages. This setting can produce frequent false positives or infrequent false positives depending on the language of the text. For example, when word breaks are not required, the English text Bernard will produce a match against the text San Bernardino, which would likely be considered a false positive. However, when text is written using a language that does not use word breaks, you cannot find words if word breaks are required. For example, with the text I flew to Tokyo in Japanese, 私は東京に飛んで, you would only be able to find the word Tokyo, 東京, when word breaks are not required.
| Boolean |
Пример кода
Пример скрипта окна Python для использования функции ExtractLocationsFromDocument в режиме прямого запуска.
import arcpy
arcpy.env.workspace = "c:/data"
arcpy.conversion.ExtractLocationsFromDocument("wells.docx", "water.gdb/wells")Информация о лицензиях
- Basic: Обязательно LocateXT
- Standard: Обязательно LocateXT
- Advanced: Обязательно LocateXT