Analyze Runway Obstacles (Aviation)

Доступно с лицензией Aviation Airports.

Краткая информация

Analyzes obstacle data and obstruction identification surfaces (OIS) to determine if obstacles are penetrating.

Использование

• The Input OIS Features parameter value must be a multipatch feature class that contains the OIS.

• The Input Obstacle Features parameter value must be a point, line, or polygon feature class and must be z-enabled with a projected horizontal and vertical coordinate system.

• The Obstacle Height parameter default value is Feature Geometry, meaning that the height of the obstacle is captured as the z-value. Alternatively, you can specify a field in the feature class that contains the height values.

• For Obstacle Features, if Absolute height is chosen, the z-value is calculated from the mean sea level. If Relative height is chosen, the z-value is calculated from the ground level.

• A point feature is generated for each obstacle feature that falls within the area covered by the OIS. The x- and y-point coordinates are the same as the obstacle point feature with which the output point is associated. The z-value of the geometry is the altitude of the OIS at the obstacle location.

• Multipoint features will be generated when the input obstacle data is a polyline or a polygon.

• The output point features will contain the following fields:

  • Obs_OID—The Object ID of the input obstacle.
  • Z—The Absolute height or the Relative height value of the input obstacle.
  • GROUND_ELEV—If Relative height is chosen, the value of the elevation source of the obstacle. This will be zero if Absolute height is chosen.
  • OIS_Z—The altitude of the OIS at the obstacle location.
  • Delta_Z—The difference in elevation between the top of the obstacle and the OIS.

    Примечание:

    Positive values indicate obstacle penetration of the OIS.

  • OBSTACLETY—The field value from the input obstacle.

  

• All calculations and analyses are performed using values in the horizontal and vertical coordinate systems of the input OIS feature class. The output feature class is created with those same input OIS feature class coordinate systems.

Параметры

Диалог

Подпись	Описание	Тип данных
Input OIS Features	The multipatch features with defined Airport schema. The feature class must be z-enabled.	Feature Layer
Input Obstacle Features	The input obstacle features that will be analyzed. The feature class must be z-enabled.	Feature Layer
Output Obstacle Feature Class	A feature class containing one point for each obstacle feature that falls within the area covered by the input OIS. If the geometry type of the input obstacle feature is a polyline or polygon, a multipoint feature class will be created.	Feature Class
Obstacle Height (Дополнительный)	The field containing the height of the obstacle features. The default value is Feature Geometry. Feature Geometry—The field containing the height of the obstacle features.	String
Unit (Дополнительный)	Specifies the linear unit that will be used for the obstacle height. This parameter is active if the Obstacle Features parameter is set to Relative height. Kilometers—The linear unit will be kilometers. Meters—The linear unit will be meters. Decimeters—The linear unit will be decimeters. Centimeters—The linear unit will be centimeters. Millimeters—The linear unit will be millimeters. Nautical miles—The linear unit will be nautical miles. Miles—The linear unit will be miles. Yards—The linear unit will be yards. Feet—The linear unit will be feet. Inches—The linear unit will be inches. Decimal degrees—The linear unit will be decimal degrees. Points—The linear unit will be points. Unknown—The linear unit will be unknown.	String
Obstacle Features (Дополнительный)	Specifies how obstacle height values will be interpreted. Absolute height— Obstacle heights will be measured from sea level. This is the default. Relative height— Obstacle heights will be measured from ground level.	String
Elevations (Дополнительный)	Specifies how obstacle base elevation heights will be identified. This parameter is active if the Obstacle Features parameter is set to Relative height. Elevation field— Base elevation heights will be derived from a numeric field of the obstacle feature class. This is the default. Elevation DEM— Base elevation heights will be derived from one or more DEMs.	String
Elevation Field (Дополнительный)	The field containing base elevation heights of the obstacle features. This parameter is active if the Obstacle Features parameter is set to Relative height and the Elevations parameter is set to Elevation field. The default is the first numeric field in the obstacle feature class.	String
Elevation Field Units (Дополнительный)	Specifies the linear unit that will be used for the base elevation values. This parameter is active if the Obstacle Features parameter is set to Relative height and the Elevations parameter is set to Elevation field. Kilometers—The linear unit will be kilometers. Meters—The linear unit will be meters. This is the default. Decimeters—The linear unit will be decimeters. Centimeters—The linear unit will be centimeters. Millimeters—The linear unit will be millimeters. Nautical miles—The linear unit will be nautical miles. Miles—The linear unit will be miles. Yards—The linear unit will be yards. Feet—The linear unit will be feet. Inches—The linear unit will be inches. Decimal degrees—The linear unit will be decimal degrees. Points—The linear unit will be points. Unknown—The linear unit will be unknown.	String
Input Elevation Model (Дополнительный)	The DEMs covering the obstacles that will be used to derive base elevation values. This parameter is active if the Obstacle Features parameter is set to Relative height and the Elevations parameter is set to Elevation DEM.	Raster Layer

Python

arcpy.aviation.AnalyzeRunwayObstacles(input_ois_features, input_obstacle_features, out_feature_class, {height_field}, {unit_field}, {height_option}, {elevation_option}, {elevation_field}, {elevation_field_unit}, {in_dems})

Имя	Описание	Тип данных
input_ois_features	The multipatch features with defined Airport schema. The feature class must be z-enabled.	Feature Layer
input_obstacle_features	The input obstacle features that will be analyzed. The feature class must be z-enabled.	Feature Layer
out_feature_class	A feature class containing one point for each obstacle feature that falls within the area covered by the input OIS. If the geometry type of the input obstacle feature is a polyline or polygon, a multipoint feature class will be created.	Feature Class
height_field (Дополнительный)	The field containing the height of the obstacle features. The default value is Feature Geometry. FEATURE_GEOMETRY—The field containing the height of the obstacle features.	String
unit_field (Дополнительный)	Specifies the linear unit that will be used for obstacle height. This parameter is enabled if the height_option parameter is set to RELATIVE_HEIGHT. KILOMETERS—The linear unit will be kilometers. METERS—The linear unit will be meters. DECIMETERS—The linear unit will be decimeters. CENTIMETERS—The linear unit will be centimeters. MILLIMETERS—The linear unit will be millimeters. NAUTICAL_MILES—The linear unit will be nautical miles. MILES—The linear unit will be miles. YARDS—The linear unit will be yards. FEET—The linear unit will be feet. INCHES—The linear unit will be inches. DECIMAL_DEGREES—The linear unit will be decimal degrees. POINTS—The linear unit will be points. UNKNOWN—The linear unit will be unknown.	String
height_option (Дополнительный)	Specifies how obstacle height values will be interpreted. ABSOLUTE_HEIGHT— Obstacle heights will be measured from sea level. This is the default. RELATIVE_HEIGHT— Obstacle heights will be measured from ground level.	String
elevation_option (Дополнительный)	Specifies how obstacle base elevation heights will be identified. This parameter is enabled if the height_option parameter is set to RELATIVE_HEIGHT. ELEVATION_FIELD— Base elevation heights will be derived from a numeric field of the obstacle feature class. This is the default. ELEVATION_DEM— Base elevation heights will be derived from one or more DEMs.	String
elevation_field (Дополнительный)	The field containing base elevation heights of the obstacle features. This parameter is enabled if the height_option parameter is set to RELATIVE_HEIGHT and the elevation_option parameter is set to ELEVATION_FIELD. The default is the first numeric field in the obstacle feature class.	String
elevation_field_unit (Дополнительный)	Specifies the linear unit that will be used for the base elevation values. This parameter is enabled if the height_option parameter is set to RELATIVE_HEIGHT and the elevation_option parameter is set to ELEVATION_FIELD. KILOMETERS—The linear unit will be kilometers. METERS—The linear unit will be meters. This is the default. DECIMETERS—The linear unit will be decimeters. CENTIMETERS—The linear unit will be centimeters. MILLIMETERS—The linear unit will be millimeters. NAUTICAL_MILES—The linear unit will be nautical miles. MILES—The linear unit will be miles. YARDS—The linear unit will be yards. FEET—The linear unit will be feet. INCHES—The linear unit will be inches. DECIMAL_DEGREES—The linear unit will be decimal degrees. POINTS—The linear unit will be points. UNKNOWN—The linear unit will be unknown.	String
in_dems [in_dems,...] (Дополнительный)	The DEMs covering the obstacles that will be used to derive base elevation values. This parameter is enabled if the height_option parameter is set to RELATIVE_HEIGHT and the elevation_option parameter is set to ELEVATION_DEM.	Raster Layer

Пример кода

AnalyzeRunwayObstacles example (stand-alone script)

The following Python window script demonstrates how to use the AnalyzeRunwayObstacles function.

import arcpy

# set gp environment
arcpy.CheckOutExtension("Airports")

# Input Obstruction Identification Surface Feature Class
inOISFeatures = r"C:\data\ois.gdb\ObstructionIdSurface"

# Input Obstruction Data
inObstacleFeatures = r"C:\data\ois.gdb\Obstacle"

# Feature class that will contain the Obstacle point output 
outFeatures = r"C:\data\ois.gdb\AnalyzeObstacles"

# Height field variables
heightField = "Z(AGL)"

# Processing AnalyzeRunwayObstacles
arcpy.aviation.AnalyzeRunwayObstacles(inOISFeatures, inObstacleFeatures,
                                     outFeatures, heightField)

arcpy.CheckInExtension("Airports")

Параметры среды

Текущая рабочая область

Информация о лицензиях

• Basic: Нет
• Standard: Обязательно Airports
• Advanced: Обязательно Airports