Unified Facilities Criteria (Aviation)

获得 Aviation Airports 许可后可用。

获得 Aviation Charting 许可后可用。

描述

Creates obstruction identification surfaces based on the Unified Facilities Criteria (UFC) 3-260-01 that is prescribed by MIL-STD 3007. These surfaces provide planning, design, construction, sustainment, restoration, and modernization criteria for the United States Department of Defense. Surfaces are created as polygon or multipatch features.

使用方法

  • 输入跑道要素参数必须启用 Z 值。

  • The tool creates UFC surfaces in an existing polygon or a multipatch feature class. If a feature class is selected for Target OIS Features features, it must have a vertical spatial reference.

  • The size of the surfaces depends on the Wing Type, Service Type, Runway Class, and Flight Rule parameter values.

  • The surface measurements can be customized with the CustomizeOIS.exe file that is part of the ArcGIS Aviation data package available at My Esri.

  • The Airport Elevation parameter has a default value of 0. If you use an elevation value greater than 0, it takes precedence and overrides any existing airport elevation value read from the Input Airport Control Point Feature parameter.

  • The Input Airport Control Point Feature parameter can be used to supply XYZ geometry for an Airport Elevation feature, Displaced Threshold features, or both. If displaced thresholds are included, surfaces will be constructed based on their XYZ geometry instead of their corresponding Input Runway Feature endpoint.

  • OIS tools are flexible and accept a variety of input and output feature class types. For more information, see the OIS Input and Output schemas.

语法

UnifiedFacilitiesCriteria(in_runway_features, target_ois_features, in_wing_type, in_service_type, in_runway_class, in_flight_rule, {highend_clear_way_length}, {lowend_clear_way_length}, {airport_elevation}, {custom_json_file}, {airport_control_point_feature_class})
参数说明数据类型
in_runway_features

The input runway dataset. The feature class must be z-enabled and contain polylines.

Feature Layer
target_ois_features

The existing output feature class that will contain the generated UFC surfaces.

Feature Layer
in_wing_type

Specifies the wing type of the aircraft.

  • FIXEDFixed wing type
  • ROTARYRotary wing type
注:

If you choose Rotary, the Runway Class parameter will default to Class A without having any effect on the surface generation.

String
in_service_type

Specifies the type of military service.

  • AIRFORCEAir Force service type
  • ARMYArmy service type
  • NAVYNavy service type
  • MARINECORPSMarine Corps service type
String
in_runway_class

Specifies the runway class. Runways are classified as either Class A or Class B based on aircraft type.

  • CLASS_AClass A runway classification
  • CLASS_BClass B runway classification
String
in_flight_rule

Specifies the flight rule. The rules that govern the procedures for conducting flight, either instrument or under visual conditions.

  • INSTRUMENTInstrument flight condition
  • VISUALVisual flight condition
String
highend_clear_way_length
(可选)

The length of the area at the high end of the runway. The unit of measurement is based on the input runway features.

Double
lowend_clear_way_length
(可选)

The length of the area at the low end of the runway. The unit of measurement is based on the input runway features.

Double
airport_elevation
(可选)

The highest elevation on any of the runways of the airport. The value should be given in the vertical coordinate system linear units of the target feature class. If no value is given, the highest point in the Input Runway Features parameter will be used.

Double
custom_json_file
(可选)

The import configuration, in JSON format, that creates the custom OIS.

File
airport_control_point_feature_class
(可选)

The point features containing an Airport Elevation feature, Displaced Threshold features, or both. Values entered into the Airport Elevation parameter will take precedence over these point features.

Feature Layer

派生输出

名称说明数据类型
out_ois_features

The updated feature class containing the generated obstruction identification surfaces.

Feature Layer

代码示例

UnifiedFacilitiesCriteria example 1 (stand-alone script)

The following Python window script demonstrates how to use the UnifiedFacilitiesCriteria tool.

import arcpy

# set gp environment
arcpy.CheckOutExtension("Airports")

# Input Runway Feature Class
inFeatures = r"C:\data\ois.gdb\RunwayCenterline"

# Feature class that will contain the OIS surface
outFeatures = r"C:\data\ois.gdb\ObstructionIdSurface"

# Generate UFC OIS
arcpy.UnifiedFacilitiesCriteria_aviation(inFeatures, outFeatures, 'FIXED',
                                         'AIRFORCE', 'CLASS_A', 'INSTRUMENT')

arcpy.CheckInExtension("Airports")
UnifiedFacilitiesCriteria example 2 (stand-alone script)

The following Python window script demonstrates how to use the UnifiedFacilitiesCriteria tool with the airport_control_point_feature_class parameter.

import arcpy

# set gp environment
arcpy.CheckOutExtension("Airports")

# Input Runway Feature Class
inFeatures = r"C:\data\ois.gdb\RunwayCenterline"

# Feature class that will contain the OIS surface
outFeatures = r"C:\data\ois.gdb\ObstructionIdSurface"

customJSON = r"C:\data\customOIS.json"

# Feature class that will contain the Airport Elevation feature
inACPFeatures= r"C:\data\ois.gdb\AirportControlPoint"

# Generate UFC OIS
arcpy.UnifiedFacilitiesCriteria_aviation(inFeatures, outFeatures, 'FIXED',
                                         'AIRFORCE', 'CLASS_A', 'INSTRUMENT', 0, 0, 0, 
customJSON, inACPFeatures)

arcpy.CheckInExtension("Airports")

许可信息

  • Basic: 否
  • Standard: 需要 Airports, ArcGIS Aviation Charting
  • Advanced: 需要 Airports, ArcGIS Aviation Charting

相关主题