Generate Spot Heights (Topographic Production)

摘要

Creates elevation point features based on contour tops and depressions. Elevation points are created in each top and depression. Point height values are populated based on a digital elevation model.

使用情况

  • This tool creates multiple points in areas with tops or depressions that have elevations of the same value. For example, if the tool finds two identical elevation values in different locations in the same top, it generates a point at each location.

  • A top refers to an elevation completely surrounded by lower elevation contour lines. A depression refers to an elevation completely surrounded by higher elevation contour lines.

  • Tops and depressions must be polylines that start and end at the same vertex. The tool will not create spot heights over contour lines that do not start and end at the same vertex.

  • If more than one input raster is used, all input rasters must have the same cell size, band count, and pixel type. All input rasters should also use the same elevation units (meters or feet).

参数

标注说明数据类型
Input Contours

Contours from which spot heights are computed.

Feature Layer
Input Raster(s)

Rasters used to derive the highest or lowest elevations in contour tops or depressions.

Raster Layer; Mosaic Layer
Target Spot Features

An existing point feature layer or feature class in which spot heights are created.

Feature Layer
Contour Height Field

The field in the input contours that contains elevation values. The field type must be numeric.

Field
Spot Height Field

The field in the output spot heights to which elevation values are written.

Field
Spot Height Subtype

Spot height subtype value assigned to new spot height features that are created.

String
Area of Interest
(可选)

The extent where spot heights will be created. The area of interest (AOI) is the outer extent of all selected polygons in the feature layer. If none are selected, the extent of the raster will be used. This parameter does not accept point layers as valid input.

Feature Layer

派生输出

标注说明数据类型
Updated Spot Heights

Spot height feature class where spot features were created.

Feature Layer

arcpy.topographic.GenerateSpotHeights(in_contour_features, in_raster, target_spot_features, contour_height_field, spot_height_field, spot_height_subtype, {area_of_interest})
名称说明数据类型
in_contour_features

Contours from which spot heights are computed.

Feature Layer
in_raster
[in_raster,...]

Rasters used to derive the highest or lowest elevations in contour tops or depressions.

Raster Layer; Mosaic Layer
target_spot_features

An existing point feature layer or feature class in which spot heights are created.

Feature Layer
contour_height_field

The field in the input contours that contains elevation values. The field type must be numeric.

Field
spot_height_field

The field in the output spot heights to which elevation values are written.

Field
spot_height_subtype

Spot height subtype value assigned to new spot height features that are created.

String
area_of_interest
(可选)

The extent where spot heights will be created. The area of interest (AOI) is the outer extent of all selected polygons in the feature layer. If none are selected, the extent of the raster will be used. This parameter does not accept point layers as valid input.

Feature Layer

派生输出

名称说明数据类型
updated_spot_features

Spot height feature class where spot features were created.

Feature Layer

代码示例

GenerateSpotHeights example (stand-alone script)

This Python stand-alone sample code creates elevation point features based on contour tops and depressions.

# Name: GenerateSpotHeights_sample.py
# Description: Creates elevation point features based on contour tops and depressions

# Import System Modules
import arcpy

# Check Out Extensions
arcpy.CheckOutExtension('Foundation')

# Setting the environment
arcpy.env.overwriteOutput = True

# Setting Local Variables
input_contour_features = r'C:\Data\MGCP_TRD_4_4.gdb\MGCP_Delta\ContourL'
in_ratser = r'C:\Data\Monterey.dt2'
target_spot_features = r'C:\Data\MGCP_TRD_4_4.gdb\MGCP_Delta\ElevP'
contour_height_field = 'ZVH'
spot_height_field = 'ZVH'
spot_height_subtype = 'CA040_Spot_Elevation_Point'
area_of_interest = r'C:\Data\MapIndex.gdb\MapIndex\TLM50_Index'
scale = '1:50,000'
z_factor = '1'

# Making a feature layer from the Area of Interest features, and selecting a single feature based on the NRN field
arcpy.management.MakeFeatureLayer(area_of_interest_feature_class, 'AOI_Index')
arcpy.management.SelectLayerByAttribute('AOI_Index', 'NEW_SELECTION', "NRN = 'V795X16573'")

# Use the Generate Spot Heights tool to create spot heights for AOI
arcpy.topographic.GenerateSpotHeights(input_contour_features, in_raster, target_spot_features, contour_height_field, spot_height_field, spot_height_subtype, 'AOI_Index', scale, z_factor)

# Check In Extensions
arcpy.CheckInExtension('Foundation')

环境

此工具不使用任何地理处理环境。

许可信息

  • Basic: 否
  • Standard: 否
  • Advanced: 需要 Production Mapping and ArcGIS Spatial Analyst extension

相关主题