Satellite sensor raster types

There are many satellite sensor products to choose from, and each has properties that can be refined to modify the processing applied to the imagery when it's added to a mosaic dataset. There are several defaults, but you can further modify these and save them for your own use at another time.

Each raster type below can be refined by defining the product type. You have the option to add all product types if you are unfamiliar with your data. This adds all your particular data, no matter how it was provided by the vendor. However, if you only want to add specific products to your mosaic dataset, choose the appropriate product type. For example, for QuickBird imagery, you can choose All, Basic, Standard, Standard Orthoready, and Orthorectified. Each of these options maps directly to a product provided by the vendor.

You can further refine how your data is added and processed by defining a processing template. These templates are specific to the type of data in each band. For example, in Landsat 7 ETM+ Level 1 products, there are nine bands. Band 8 is panchromatic and has the highest spatial resolution; bands 1 through 5 and 7 are multispectral bands (blue, green, red, and infrared) and have a lower spatial resolution than the panchromatic band; and bands 6a and 6b are thermal bands. For the Level 1 products, there are six processing templates:

• All Bands—The data is added and grouped in any or all of the processing templates that apply. For example, for Landsat 7, three entries will be created in the mosaic dataset for each scene: Panchromatic (band 8), Multispectral (bands 1 through 5 and 7), and Thermal (bands 6a and 6b). A field is added to the attribute table named Tag, which identifies the group each band belongs to, for example, Pan for panchromatic, MS for multispectral, and Thermal for the thermal bands.
• Panchromatic—Only the panchromatic band is added to the mosaic dataset. For example, for Landsat 7, only band 8 is added.
• Multispectral—The multispectral bands are added as a single raster dataset in the mosaic dataset. For example, for Landsat 7, there will be a single row in the mosaic dataset representing bands 1 through 5 and 7.
• Pansharpen—The bands used to generate the pan-sharpened product are added to the mosaic dataset. This generally results in a four-band mosaic dataset using the red, green, blue, infrared, and panchromatic bands.
• Pansharpen and Multispectral—The standard combination of multispectral and panchromatic bands added to the mosaic dataset. For example, for Landsat, a multispectral group will be added, but it will have a minimum pixel size set to the maximum pixel size of the panchromatic image. That way, the mosaicked image will not be pan sharpened when you zoom out beyond the resolution of the panchromatic image.
• Thermal—The thermal bands are added as a single raster dataset in the mosaic dataset. For example, for Landsat 7, there will be a single row in the mosaic dataset representing bands 6a and 6b.

In addition to these processing templates, Landsat 4-5 TM, Landsat 7 ETM+, and Landsat 8 raster types support Higher Level Science Data Products including the Landsat Analysis Ready Data (ARD). See Landsat 7 ETM+ for information on the product types and processing templates that support the Higher Level Science Data Products.

By default, the bands will be ordered sequentially—the first band in the source will be the first band in the raster added to the mosaic dataset, and so on. However, if you defined a Product Definition when creating the mosaic dataset, the data defined by these raster types will be added according to their wavelengths. For example, if the Product Definition was Natural Color (RGB), the bands with the wavelengths closest to the red, green, and blue wavelengths will be added to the raster in the mosaic dataset. If your dataset does not have a band of a particular wavelength, the closest wavelength will be chosen.

Note:

If a Product Definition is defined when creating the mosaic dataset, add the data using the correct template for the raster type. For example, if you defined Landsat for the mosaic dataset's product definition, it will be expecting a dataset with five bands. Therefore, you should use the raster type's Multispectral template. If you use the Pansharpen template, it only adds the first four bands to the mosaic dataset and the other will be empty.

The default template is often the combined Pansharpen and Multispectral template.

ASTER

ASTER or 'Advanced Spaceborne Thermal Emission and Reflection Radiometer' is an advanced multispectral imager that was launched by NASA in December, 1999. ASTER covers a wide spectral region with 14 bands from the visible to the thermal infrared with high spatial, spectral and radiometric resolution. The spatial resolution varies with wavelength: The Visible and Near-Infrared (VNIR) at 15 meters, the short wave infrared (SWIR) at 30 meters, and the thermal infrared (TIR) at 90 meters. Each ASTER scene covers an area of 60 by 60 km. To learn more about this sensor, see ASTER.

Several ASTER products are supported:

• Level 1
  1. L1T - Registered Radiance at the Sensor - Precision Terrain Corrected
  2. L1B - Registered Radiance at the Sensor
• Level 2
  1. AST 05 - Surface Emissivity
  2. AST07 - Surface Reflectance
  3. AST 08 - Surface Kinetic Temperature
  4. AST09 - Surface Radiance
• Level 3
  1. AST14DEM - Digital Elevation Model
  2. AST14OTH - Registered Radiance at the Sensor - Orthorectified
  3. AST14DMO - Digital Elevation Model and Registered Radiance at the Sensor - Orthorectified

Product type	Processing templates
All DEM L1B L1T Registered Radiance Surface Emissivity Surface Kinetic Temperature Surface Radiance Surface Reflectance	All Bands Digital Elevation Model Global Digital Elevation Model (ASTGTM) Multispectral SWIR SWIR - Registered Radiance SWIR - Surface Reflectance SWIR - Surface Radiance TIR TIR - Registered Radiance TIR - Surface Emissivity TIR - Surface Kinetic Temperature TIR - Surface Radiance VNIR VNIR - Registered Radiance VNIR - Surface Reflectance VNIR - Surface Radiance

Spectral range

Spectral range

Tag	Band order	Wavelength (nm)	Description
VNIR	1	520–600	Visible Near Infrared 1
VNIR	2	630–690	Visible Near Infrared 2
VNIR	3	760–860	Visible Near Infrared 3N
VNIR	4	760–860	Visible Near Infrared 3B2
SWIR	1	1600–1700	Shortwave Infrared 4
SWIR	2	2145–2185	Shortwave Infrared 5
SWIR	3	2185-2225	Shortwave Infrared 6
SWIR	4	2235-2285	Shortwave Infrared 7
SWIR	5	2295-2365	Shortwave Infrared 8
SWIR	6	2360-2430	Shortwave Infrared 9
TIR	1	8125-8475	Thermal Infrared 10
TIR	2	8475-8825	Thermal Infrared 11
TIR	3	8925-9275	Thermal Infrared 12
TIR	4	10250-10950	Thermal Infrared 13
TIR	5	10950-11650	Thermal Infrared 14

DEIMOS-2

The DEIMOS-2 raster type allows you to add raster data collected from the DEIMOS-2 satellite, which is the second DEIMOS Earth observation system. DEIMOS-2 is a very high resolution multispectral optical satellite that has a 4-meter multispectral resolution. The panchromatic band has a 1-meter resolution, and a pan-sharpened product of 0.75 meters can be created after it has been ground processed. It operates in a Sun-synchronous orbit at an approximate altitude of 620 km. It operates a push-broom sensor that records five bands. To learn more about this sensor, see Deimos-2 .

The Deimos-2 sensor has one product level:

• Level 1—This product is corrected for geometric distortions.

Product type	Processing templates
All Level 1	All Bands Multispectral Panchromatic Pansharpen

Spectral range

Spectral range

Tag	Band order	Wavelength (nm)	Description
PAN	1	560–900	Panchromatic
MS	2	466–525	Blue
MS	3	532–599	Green
MS	4	640–697	Red
MS	5	770–892	Near infrared

DMCii

The DMCii raster type allows you to add raster data collected from the DMC satellites, such as AlSat-1, Beijing-1, Deimos-1, NigeriaSat-1, UK-DMC, and UK-DMC2.

DMCii product types

Product type	Product type descriptions	Processing templates
All	Both L1R and L1T products will be looked for when adding image data.	All Bands Multispectral Pseudocolor
L1R	This applies to L1R, a band-registered product derived from raw satellite data.
L1T	Orthorectified product derived from L1R product.

The metadata for L1R and L1T product types is stored within the DIMAP (.dim) files.

Use the Pseudocolor processing template to view the DMCii imagery as a natural color image.

DMCii spectral range

Spectral range

Tag	Band order	Wavelength (nm)	Description
MS	3	520–600	Green
MS	2	630–690	Red
MS	1	770–900	Near infrared

DubaiSat-2

The DubaiSat-2 raster type allows you to add raster data collected from the DubaiSat-2 satellite, which is the second Earth observation satellite of the United Arab Emirates (UAE) in continuation of the DubaiSat-1 project. DubaiSat-2 generates imagery at a spatial resolution of 1 meter in panchromatic and 4 meters in multispectral bands. To learn more about this sensor, see Emirates Institution for Advanced Science & Technology .

There are two product levels for DubaiSat-2:

• Geo—This product has had some geometric correction in addition to the radiometric and sensor correction and has been orthorectified based on ground control points. It uses a digital elevation model to eliminate distortions due to relief and has been georeferenced to a UTM projection. This product can be used with any processing template.
• Radio—This product has had some radiometric correction applied to fix distortions due to differences in the sensitivity of the elementary detectors of the sensor. This product can be used with any processing template.

Product type	Processing templates
All Geo Radio	All Bands Multispectral Panchromatic Pansharpen Pansharpen and Multispectral

Spectral range

Spectral range

Tag	Band order	Wavelength (nm)	Description
MS	1	420–510	Blue
MS	2	510–580	Green
MS	3	600–720	Red
MS	4	760–890	Near infrared
Pan	1	450–900	Panchromatic

FORMOSAT-2

The FORMOSAT-2 raster type allows you to add raster data collected from the FORMOSAT-2 satellite. To learn more about this sensor, see Airbus Defence and Space .

FORMOSAT-2 supports three types of products:

• Level 1A—This product has had some radiometric correction applied to fix distortions due to differences in the sensitivity of the elementary detectors of the sensor. This product can be used with any processing template and a DEM should be specified within the raster type's properties.
• Level 2A—This product has had the same radiometric correction as applied in the Level 1A product and has been georeferenced to a UTM WGS84 projection (without using ground control points). This product can be used with any processing template.
• Ortho—This product has had the same radiometric correction as applied in the Level 1A product, and has been orthorectified based on ground control points and a digital elevation model to eliminate distortions due to relief. This product can be used with any processing template.

Product type	Processing templates
All FORMOSAT-2 Ortho FORMOSAT-2 Scene 1A FORMOSAT-2 Scene 2A	Multispectral Panchromatic All Bands

Spectral range

Spectral range

Tag	Band order	Wavelength (nm)	Description
MS	1	630–690	Red
MS	2	520–600	Green
MS	3	450–520	Blue
MS	4	770–900	Near infrared
Pan	1	450–900	Panchromatic

GeoEye-1

The GeoEye-1 raster type allows you to add raster data collected from the GeoEye-1 satellite sensor and the OrbView-3 satellite sensor. To learn more about these sensors, see DigitalGlobe .

GeoEye product type mapping

Product type	Processing templates
All Basic Orthorectified Orthorectified AComp Standard Standard AComp Standard Orthoready Standard Orthoready AComp	All Bands Multispectral Multispectral AComp Panchromatic Panchromatic AComp Pansharpen Pansharpen AComp Pansharpen and Multispectral

Spectral range

GeoEye-1 spectral range

Tag	Band order	Wavelength (nm)	Description
Pan	1	450–800	Panchromatic
MS	1	450–510	Blue
MS	2	510–580	Green
MS	3	655–690	Red
MS	4	780–920	Near infrared

GF-1 PMS

Gaofen-1 (GF-1), China’s high-resolution earth observation satellite, was launched in April 2013. The GF-1 PMS raster type allows you to add raster data collected from the GF-1 PMS sensor, which collects panchromatic and multispectral data.

Product type	Processing templates
All Level 1A Level 1C	All Bands Multispectral Panchromatic Pan sharpen Pan sharpen and Multispectral

Spectral range

Spectral range

Tag	Band order	Wavelength (nm)	Description
Pan	1	450–900	Panchromatic
MS	1	450–520	Blue
MS	2	520–590	Green
MS	3	630–690	Red
MS	4	770–890	Near infrared

To learn more about this sensor, refer to the Earth Observation Portal website.

GF-1 WFV

The GF-1 WFV raster type allows you to add raster data collected from the GF-1 WFV sensor. The WFV captures data used for wide field viewing.

Product type	Processing templates
All Level 1A Level 1C	All Bands Multispectral

Spectral range

Spectral range

Tag	Band order	Wavelength (nm)	Description
MS	1	450–520	Blue
MS	2	520–590	Green
MS	3	630–690	Red
MS	4	770–890	Near infrared

To learn more about this sensor, refer to the Earth Observation Portal website.

GF-2 PMS

Launched on August 19, 2014, the GF-2 PMS has a 1-meter spatial resolution and a 45-kilometer-swath width. It can be used for geographic and natural resource surveys, environment and climate change monitoring, precision agriculture, disaster relief, and city planning. The data comes as a Level 1 product.

Spectral range

Spectral range

Tag	Band order	Wavelength (nm)	Description
Pan	1	450–900	Panchromatic
MS	1	450–520	Blue
MS	2	520–590	Green
MS	3	630–690	Red
MS	4	770–890	Infrared

Product type	Processing templates
Level 1	All Bands Multispectral Panchromatic Pan sharpen Pan sharpen and Multispectral

To learn more about this sensor, refer to the Earth Observation Portal website.

GF-4

The GF-4 satellite is the first geosynchronous orbiting satellite in China. It is equipped with a stare sensor that has a swath of over 400 kilometers. The visible and near infrared (VNIR) portion of the spectrum has a resolution of 50 meters. The mid-wave infrared (MWIR) portion has a resolution of 400 meters. GF-4 is based on area array staring imaging and has the capability of visible light, multispectrum, and infrared imaging. To learn more about this sensor, see GF-4 .

GF-4 product type and processing templates

Product type	Processing templates
Level 1	All Bands Multispectral MWIR Panchromatic VNIR

GF-4 spectral ranges

Tag	Band order	Wavelength (nm)	Description
Pan	1	450–900	Panchromatic
MS	2	450–520	Blue
MS	3	520–600	Green
MS	4	630–690	Red
MS	5	760–900	Near infrared
MWIR	1	3500–4100	Mid-wave infrared

HJ 1A/1B CCD

The HJ 1A/1B CCD raster type allows you to add raster data collected from HJ-1A and HJ-1B satellites designed for environment and disaster monitoring.

Product type	Processing templates
Level 2	Multispectral

Spectral range

Spectral range

Tag	Band order	Wavelength (nm)	Description
MS	1	430–520	Blue
MS	2	520–600	Green
MS	3	630–690	Red
MS	4	760–900	Near infrared

To learn more about these sensors, refer to the HJ-1A/1B specifications website.

IKONOS

The IKONOS raster type allows you to add raster data collected from the IKONOS satellite sensor. To learn more about this sensor, see DigitalGlobe .

Product type	Processing templates
All Geo GeoProfessional	All Bands Multispectral Panchromatic Pansharpen Pansharpen and Multispectral

Spectral range

Spectral range

Tag	Band order	Wavelength (nm)	Description
Pan	1	526–929	Panchromatic
MS	1	445–516	Blue
MS	2	506–595	Green
MS	3	632–698	Red
MS	4	757–863	Near infrared

Jilin-1

The Jilin-1 is the China's first self-developed remote sensing satellite for commercial use. It is a 420-kilogram high-definition optical satellite with a 0.72-meter resolution panchromatic sensor and 2.88-meter resolution multispectral sensor. It is equipped with three deployable solar panels for power generation that will be stored in internal batteries. The satellite will operate on a 656-kilometer Sun-synchronous orbit. To learn more about this sensor, see Jilin-1 .

The Jilin-1 sensor has one product level:

• Level 1—This product has been corrected for geometric radiometric distortions and projected to UTM, with an RPC file.

Product type	Processing templates
All Level 1	All Bands Multispectral Panchromatic Pansharpen Pansharpen and Multispectral

Spectral range

Spectral range

Tag	Band order	Wavelength (nm)	Description
Pan	1	500–800	Panchromatic
MS	1	450–520	Blue
MS	2	520–600	Green
MS	3	630–690	Red

KOMPSAT-2

The KOMPSAT-2 raster type allows you to add raster data collected from KOMPSAT-2 (Korea Multi-Purpose Satellite-2). To learn more about this sensor, see Korea Aerospace Research Institute .

The KOMPSAT-2 products are generated in KARI and DIMAP format. There are two supported KOMPSAT-2 products:

• Level 1A—This product has had some radiometric correction applied to fix distortions due to differences in the sensitivity of the elementary detectors of the sensor.
• Level 2A—This product has had the same radiometric correction as applied in the Level 1A product and has been georeferenced to a UTM WGS84 projection (without using ground control points).

Product type	Processing templates
All KOMPSAT-2 Scene 1A KOMPSAT-2 Scene 2A	All Bands Multispectral Panchromatic Pansharpen Pansharpen and Multispectral

Spectral range

Spectral range

Tag	Band order	Wavelength (nm)	Description
MS	1	450–520	Blue
MS	2	520–600	Green
MS	3	630–690	Red
MS	4	760–900	Near infrared
Pan	1	500–900	Panchromatic

KOMPSAT-3

The KOMPSAT-3 raster type allows you to add raster data collected from KOMPSAT-3 (Korea Multi-Purpose Satellite-3, also known as Arirang-3), a high-resolution Korean observation mission of the Korea Aerospace Research Institute (KARI). To learn more about this sensor, see Korea Aerospace Research Institute and Satellite Imaging Corporation .

The KOMPSAT-3 satellite supports three product types:

• Level 1G—This product has had some geometric correction in addition to the radiometric and sensor correction and has been orthorectified based on ground control points. It uses a digital elevation model to eliminate distortions due to relief and has been georeferenced to a UTM projection. This product can be used with any processing template.
• Level 1R—This product has had some radiometric correction applied to fix distortions due to differences in the sensitivity of the elementary detectors of the sensor. This product can be used with any processing template.
• Level 1O—This product has had some geometric correction in addition to the radiometric and sensor correction and has been orthorectified based on average height over the region. It is georeferenced to a UTM projection and can be used with any processing template.

Product type	Processing templates
All Level 1G Level 1R Level 1O	All Bands Multispectral Panchromatic Pansharpen Pansharpen and Multispectral

Spectral range

Spectral range

Tag	Band order	Wavelength (nm)	Description
MS	1	450–520	Blue
MS	2	520–600	Green
MS	3	630–690	Red
MS	4	760–900	Near infrared
Pan	1	450–900	Panchromatic

Landsat 1–5 MSS

The Landsat 1–5 MSS raster type allows you to add raster data collected from the Landsat Multispectral Scanner (MSS) instrument. The MSS instrument operated on the first five Landsat satellite spacecrafts. To learn more about this, see Landsat science .

Product type	Processing template
All Level 1 (L1G)	All Bands Multispectral Pseudocolor Thermal

Use the Pseudocolor processing template to view the Landsat 1–5 MSS imagery as a natural color image.

Spectral range

Spectral range

Tag	Band order	Wavelength (nm)	Description
MS	1	500–600	Green
MS	2	600–700	Red
MS	3	700–800	Near infrared 1
MS	4	800–1100	Near infrared 2
Thermal	1	10400–12500	Thermal

Landsat 4–5 TM

The Landsat 4–5 TM raster type allows you to add raster data collected from the Landsat Thematic Mapper (TM) instrument. To learn more about this and Landsat Higher Level Science Data Products, see Landsat science and Landsat Higher Level Science Data Products .

Product type	Processing template
All Brightness Temperature Level 1 Spectral Indices Surface Reflectance Top of Atmosphere Reflectance	All Bands Brightness Temperature Multispectral Spectral Indices Surface Reflectance Thermal Brightness Temperature Top of Atmosphere Reflectance

Spectral range

Spectral range

Tag	Band order	Wavelength (nm)	Description
MS	1	450–520	Blue
MS	2	520–600	Green
MS	3	630–690	Red
MS	4	760–900	Near infrared 1
MS	5	1550–1750	Near infrared 2
MS	6	2080–2350	Mid infrared
Thermal	1	10400–12500	Thermal

Landsat 7 ETM+

The Landsat 7 ETM+ raster type allows you to add raster data collected from the Landsat Enhanced Thematic Mapper Plus (ETM+) instrument. To learn more about this and Landsat Higher Level Science Data Products, see Landsat science and Landsat Higher Level Science Data Products .

Product type	Processing template
All Brightness Temperature Level 1 (L1G, L1T) Spectral Indices Surface Reflectance Top of Atmosphere Reflectance	All Bands Brightness Temperature Multispectral Panchromatic Pansharpen Pansharpen and Multispectral Spectral Indices Surface Reflectance Thermal Top of Atmosphere Reflectance

Spectral range

Spectral range

Tag	Band order	Wavelength (nm)	Description
MS	1	450–520	Blue
MS	2	520–600	Green
MS	3	630–690	Red
MS	4	770–900	Near infrared 1
MS	5	1550–1750	Near infrared 2
MS	6	2080–2350	Mid infrared
Thermal	1	10400–12500	Thermal 1
Thermal	2	10400–12500	Thermal 2
Pan	1	520–900	Panchromatic

Landsat 8

The Landsat 8 raster type allows you to add raster data collected from Landsat 8, the latest in the Landsat series of remote sensing satellites started as part of the Landsat Data Continuity Mission. To learn more about this and Landsat Higher Level Science Data Products, see Landsat science and Landsat Higher Level Science Data Products .

Note:

When Landsat 8 Surface Reflectance and ARD data is added to a mosaic dataset, a function is available in the raster dataset properties to add a mask. This mask allows you to mask out unwanted image data values that can affect subsequent raster functions such as negative values.

Product type	Processing template
All Brightness Temperature Level 1 (L1G, L1T) Spectral Indices Surface Reflectance Top of Atmosphere Reflectance	All Bands Brightness Temperature Cirrus Cloud Landcover Multispectral Panchromatic Pansharpen Pansharpen and Multispectral QA SnowIce Spectral Indices Surface Reflectance Thermal Top of Atmosphere Reflectance Vegetation Water

Spectral range

Spectral range

Tag	Band order	Wavelength (nm)	Description
MS	1	430–450	Coastal Aerosol
MS	2	450–510	Blue
MS	3	530–590	Green
MS	4	640–670	Red
MS	5	850–880	Near infrared
MS	6	1570–1650	Shortwave infrared 1
MS	7	2110–2290	Shortwave infrared 2
MS	8	1360–1380	Cirrus
Thermal	1	10600–11190	Thermal Infrared 1
Thermal	2	11500–12510	Thermal Infrared 2
Pan	1	500–680	Panchromatic

NCDRD

NCDRD is an acronym for NITF Version 2.1 Commercial Dataset Required Document. The NCDRD raster type allows you to add NITF images that follow NCDRD specifications into mosaic datasets. This raster type supports NCDRD products from many satellites: GeoEye-1, IKONOS, QuickBird, WorldView-1, and WorldView-2.

NCDRD product types

Product type	Processing templates
Preprocessed (P1, P2, P3) Georeferenced (G1, G2, G3) Orthorectified (R1, R2, R3)	Default Multispectral Panchromatic Pansharpen Pansharpen and Multispectral

The Default processing template adds and groups data in all of the processing templates that apply. A field is added to the attribute table named Tag, which identifies within which the group each band belongs:

• Pan—Panchromatic
• MS—Multispectral
• Thermal—Thermal Bands

Images added to a mosaic dataset via the NCDRD raster type will have metadata columns extracted from the NITF header as well as key metadata from satellite sensors, such as Sun Azimuth and Sun Elevation.

PlanetScope

PlanetScope is a satellite constellation that consists of 130 satellites capturing images of the earth’s land surface daily. The constellation consists of multiple launches of groups of individual CubeSat satellites.

Based on the sensor instrument used, the data acquired from the constellation consists of 4-band or 5-band multispectral imagery:

• Four bands—Red, Green, Blue and Near Infra-Red bands.
• Five bands—Red, Green, Blue and Near Infra-Red bands and an additional RedEdge band.

PlanetScope product types

Product type	Processing templates
All Level1—PlanetScope Basic Scene Product Level3— PlanetScope Ortho Scene Product	Multispectral

PlanetScope spectral range

Spectral range

Tag	Band order	Wavelength (nm)	Description
MS	1	455–515	Blue
MS	2	500–590	Green
MS	3	590–670	Red
MS	4	697–713	RedEdge
MS	5	780–860	Near infrared

For more information, refer to Planet imagery product specification.

Pléiades

The Pléiades raster type allows you to add raster data collected from the Pléiades satellite sensor. To learn more about this sensor, see Airbus Defence and Space .

Pléiades product types

Product type	Processing templates
All ORTHO ORTHO DISPLAY ORTHO REFLECTANCE PRIMARY PRIMARY DISPLAY PRIMARY REFLECTANCE PROJECTED PROJECTED DISPLAY PROJECTED REFLECTANCE	All Bands Multispectral Multispectral Display Multispectral Reflectance Panchromatic Panchromatic Display Panchromatic Reflectance Pansharpen Pansharpen and Multispectral Pansharpen Display Pansharpen Reflectance

Pléiades spectral range

Spectral range

Tag	Band order	Wavelength (nm)	Description
MS	1	450–530	Blue
MS	2	510–590	Green
MS	3	620–700	Red
MS	4	775–915	Near infrared
Pan	1	450–530	Panchromatic

QuickBird

The QuickBird raster type allows you to add raster data collected from the QuickBird satellite sensor. The product types in the ArcGIS application map to the similar product name provided by the vendor. Standard Orthoready is also known as Ortho Ready Standard Imagery.

To learn more about this sensor, see DigitalGlobe .

Product type	Processing templates
All Basic Orthorectified Orthorectified AComp Standard Standard AComp Standard Orthoready Standard Orthoready AComp	All Bands Multispectral Multispectral AComp Panchromatic Panchromatic AComp Pansharpen Pansharpen AComp Pansharpen and Multispectral

Spectral range

Spectral range

Tag	Band order	Wavelength (nm)	Description
Pan	1	450–900	Panchromatic
MS	1	450–520	Blue
MS	2	520–600	Green
MS	3	630–690	Red
MS	4	760–900	Near infrared

RADARSAT-2

RADARSAT-2 data can be added to a mosaic dataset using the RADARSAT-2 raster type. The RADARSAT-2 products consist of the Synthetic Aperture Radar (SAR) image or signal data in addition to the metadata. The basic product generated by the RADARSAT-2 processor contains a product information file and image pixel data files. The RADARSAT-2 satellite differentiates the products by the beam mode and by the level of processing that has been applied to the data.

These datasets have information of the polarimetric data. The product information file for the various product types is encoded in XML format. The RADARSAT-2 raster type allows you to create a mosaic dataset where you can query the mosaic dataset attribute table for the imagery according to the metadata in the attribute table.

To learn more about this sensor, see MDA .

The following product types of RADARSAT-2 can be added using this raster type:

Product type	Processing templates
SLC—Slant Range Single Look Complex product SGF—SAR Georeferenced Fine SGX—SAR Georeferenced Extra SSG—SAR Systematic Geocorrected SPG—SAR Precision Geocorrected SCN—ScanSAR Narrow Beam SCW—ScanSAR Wide Beam	Raw Despeckle

SLC is a complex product type where each pixel is represented by a complex value. When applying a Speckle filter on an SLC product, intensity (magnitude) of the pixel value is used.

There are two processing templates that can be used depending on the level of processing required:

• Raw—The data will be added without applying any functions. This is the default template and is used for basic visualization.
• Despeckle—The data will be added with the Speckle function applied. The output is a speckle-filtered, smoothed image.

The following are the polarizations available with RADARSAT-2 products:

• HH—The radar signals are transmitted horizontally and received horizontally.
• VV—The radar signals are transmitted vertically and received vertically.
• HV—The radar signals are transmitted horizontally and received vertically.
• VH—The radar signals are transmitted vertically and received horizontally.

The RADARSAT-2 product can be single, dual, or quad polarized, depending on the beam mode. The beam modes are distinguished by a specific beam elevation angle and width used for transmitting and receiving signals. The various beam modes include the following:

• Single Beam—Standard, Wide, Fine, Multi-Look Fine, Ultra-Fine, Extended High, Extended Low, Standard Quad Polarization, and Fine Quad Polarization
• ScanSAR—ScanSAR Narrow and ScanSAR Wide
• Spotlight—Spotlight A

RapidEye

The RapidEye raster type allows you to add raster data collected from the RapidEye satellite sensors. To learn more about this sensor, see Planet Labs .

Product type	Processing template
All Level 1B Level 3A	Multispectral

Spectral range

Spectral range

Tag	Band order	Wavelength (nm)	Description
MS	1	440–510	Blue
MS	2	520–590	Green
MS	3	630–685	Red
MS	4	690–730	Red edge
MS	5	760–850	Near infrared

Sentinel-1

SENTINEL-1 is European Space Agency's (ESA) C-band Synthetic Aperture Radar satellite constellation comprising two polar-orbiting satellites, operating day and night, thus enabling image acquisition at all times regardless of the weather. Operating in four different acquisition modes of Stripmap (SM), Interferometric Wide Swath (IW), Extra-Wide Swath (EW) and Wave (WV), the SENTINEL-1 mission provides coverage up to 400 km at different resolutions (up to 5 m). The satellite supports both single and dual polarization capabilities in different acquisition modes. For more information about the different acquisition modes that are available in different polarizations, please refer to Sentinel-1 User Guides .

Currently ArcGIS supports the following Level 1 products:

GRD—Ground Range Detected products lie in the ground range by azimuth surface, with image coordinates oriented along ground range and flight direction. To convert from imaging slant range coordinates to ground range coordinates, a slant to ground projection is performed onto an ellipsoid (typically the WGS84 ellipsoid) corrected using terrain height, which varies in azimuth and is constant in range. The standard GRD products are detected, multi-look products, with approximately square resolution cells and square pixel spacing. Multi-looking is a processing property that results in images with reduced speckle, but also with reduced resolution: the more looks the less speckle noise and the lower the resolution.

SLC—Single Look Complex products are images in the slant range by azimuth imaging plane, in the image plane of satellite data acquisition. Each image pixel is represented by a complex (I and Q) magnitude value and therefore contains both amplitude and phase information. The processing for all SLC products results in a single look in each dimension using the full available signal bandwidth. The images are geo-referenced using orbit and attitude data from the satellite.

Product type	Processing templates
All GRD SLC	Despeckle Raw

There are two processing templates that can be used depending on the level of processing required:

• Raw—The data will be added without applying any functions. This is the default template and is used for basic visualization.
• Despeckle—The data will be added with the Speckle function applied. The output is a speckle-filtered, smoothed image.

The following are the polarizations available with Sentinel-1 products:

• HH—The radar signals are transmitted horizontally and received horizontally.
• VV—The radar signals are transmitted vertically and received vertically.
• HV—The radar signals are transmitted horizontally and received vertically.
• VH—The radar signals are transmitted vertically and received horizontally.
• HH HV - Dual HH/HV polarization.
• VV VH - Dual VV/VH polarization.

The Sentinel-1 raster type also supports the inclusion of two new raster functions, which are exclusive only to Sentinel-1:

• Sentinel-1 Thermal Noise Removal function—This function performs thermal noise removal for Sentinel 1 datasets only. Works with both GRD (Ground Range Detection) and SLC (Single Look Complex) products.
• Sentinel-1 Radiometric Calibration function— This function performs radiometric calibration for Sentinel 1 datasets only. Works with both GRD (Ground Range Detection) and SLC (Single Look Complex) products.

To learn more about this sensor, see European Space Agency .

Sentinel-2

Sentinel-2 spacecraft has a Multi-Spectral Instrument (MSI) that collects data in spectral bands spanning from the visible and the near infrared to the shortwave infrared spectra at three different resolutions:

• 4 bands at 10 meters
• 6 bands at 20 meters
• 3 bands at 60 meters

Sentinel-2 MSI data is available as different product types and is systematically processed from Level 0 to Level 1C and Level 2A. Currently ArcGIS supports Level 1C and Level 2A products.

Level1—This corresponds to Level 1C processing level. The product results from using a digital elevation model (DEM) to project the image in cartographic coordinates. Per-pixel radiometric measurements are provided in Top Of Atmosphere (TOA) reflectance with all parameters to transform them into radiance. Level 1C products are resampled with a constant Ground Sampling Distance (GSD) of 10, 20, and 60 meters, depending on the native resolution of the different spectral bands. In Level 1C products, pixel coordinates refer to the upper left corner of the pixel.

Level2—This corresponds to Level 2A processing level, which consists of scene classification and atmospheric correction applied to Level-1C orthoimage product. Level-2A is an Orthorectified Bottom-Of-Atmosphere (BOA) reflectance product. Level-2A products are resampled similar to Level-1C products with a constant GSD (Ground Sampling Distance) of 10m, 20m and 60m according to the native resolution of the different spectral bands. The Scene Classification data is supported as a raster product.

To learn more about this sensor, see European Space Agency .

Since the Sentinel-2 Level 1C MSI data is distributed in three different resolutions, ArcGIS generates three different types of composite products based on the resolutions.

Product type	Processing templates
All Level1 Level2	Multispectral Multispectral-10m Multispectral-20m Multispectral-60m All Bands True Color BOA Reflectance BOA Reflectance-10m BOA Reflectance-20m BOA Reflectance-60m SCL-20m SCL-60m Aerosol Optical Thickness Water Vapor

Spectral range

Spectral range

Tag	Band order	Wavelength (nm)	Description
Multispectral-60m	1	433–453	B1
Multispectral-10m	1	458–522	B2
Multispectral-10m	2	543–577	B3
Multispectral-10m	3	650–680	B4
Multispectral-20m	1	698–712	B5
Multispectral-20m	2	733–747	B6
Multispectral-20m	3	773–793	B7
Multispectral-10m	4	784–899	B8
Multispectral-20m	4	855–875	B8A
Multispectral-60m	2	935–955	B9
Multispectral-60m	3	1360–1390	B10
Multispectral-20m	5	1565–1655	B11
Multispectral-20m	6	2100–2280	B12

Sentinel-3

Sentinel-3 is European Space Agency's (ESA) Earth Observation Satellite launched as part of the Copernicus program, which is jointly managed by European Organisation for the Exploitation of Meteorological Satellites (EUMETSAT). It is mainly intended to support ocean forecasting systems, environmental and climate monitoring, and maritime safety services by measuring sea surface topography, sea and land surface temperature, and ocean and land surface color.

ArcGIS Pro supports the following Sentinel-3 data products:

• OLCI (Ocean and Land Colour Instrument) has 21 spectral bands (in the range of 400 nm to 1020 nm) with wavelengths ranging from the optical to the near-infrared at a spatial resolution of 300 m. OLCI scans the ocean and land surface, provides information on the atmosphere by measuring water vapor absorption, aerosol levels, and chlorophyll absorption, and contributes to climate study.

  OLCI products are classified into the following product types:

  • Level 1—Top of Atmosphere (TOA) Radiance
  • Level 2—Land & Atmosphere and Ocean & Atmosphere
    • Rectified reflectance for the band O10 (RC681) and band O17 (RC865) : File rc_ogvi.nc in the land processing data.
• SLSTR (Sea and Land Surface Temperature Radiometer) determines sea and land surface temperatures in nine spectral bands with two additional bands for fire monitoring to support global climate monitoring and change detection. The first six bands are VNIR (bands 1 to 3) and SWIR (bands 4 to 6) with a spatial resolution of 500 m, and all the other bands have a spatial resolution of 1 km.

  SLSTR products are classified into the following gridded product types:

  • Sea Surface Temperature
  • Land Surface Temperature
    • BIOMI product. GlobCover surface classification code (biome)
    • Brightness temperature product
    • Radiance product
    • Fire Detection, FRP product
• Synergy (OLCI + SLSTR) is a combination of the OLCI and SLSTR products at a spatial resolution of 1 km. Its main objective is to monitor the land use and provide information related to the study of climate and vegetation.
  • Aerosol Angstrom Exponent at 550 nm
  • Aerosol Optical Thickness at 550 nm

Product type

Processing templates

All TOA Radiance (Level 1) Land & Atmosphere (Level 2) Land Surface Temperature (Level 2) Sea Surface Temperature (Level 2) Ocean & Atmosphere (Level 2) Synergy (Level 2)

TOA Radiance Integrated Water Vapour Column OLCI Global Vegetation Index OLCI Terrestrial Chlorophyll Index Land Quality and Science Flags Land Surface Temperature GlobCover Surface Classification Fractional Vegetation Cover NDVI Total Column Water Vapour Sea Surface Temperature Sea Ice Fraction Wind Speed Aerosol Contamination Indicator Water Surface Directional Reflectance Aerosol Angstrom Exponent Aerosol Angstrom Exponent at 550m Aerosol over Water Total Suspended Matter Concentration Transparency Properties of Water Photosynthetically Active Radiation Inherent Optical Properties of Water OC4Me Algorithm Chlorophyll Concentration Neural Net Chlorophyll Concentration Aerosol Optical Thickness Surface Directional Reflectance (OLCI) Surface Directional Reflectance (SLSTR Nadir) Surface Directional Reflectance (SLSTR Oblique) Total Ozone Column VGT Surface Reflectance

To learn more about the other product types and this sensor, see the European Space Agency website.

SPOT 5

The SPOT 5 raster type allows you to add raster data collected from the SPOT 5 satellite. To learn more about this sensor, see Airbus Defence and Space .

There are three SPOT 5 products supported:

• Level 1A—This product has had some radiometric correction applied to fix distortions due to differences in the sensitivity of the elementary detectors of the sensor. This product should be used with the Orthorectify processing template and a DEM should be specified within the raster type's properties.
• Level 2A—This product has had the same radiometric correction as applied in the Level 1A product and has been georeferenced to a UTM WGS84 projection (without using ground control points). You can use this product with the Panchromatic, Multispectral, Pseudocolor, or Pansharpen processing templates.
• SPOTView Ortho—This product has had the same radiometric correction as applied in the Level 1A product and has been orthorectified based on ground control points and a digital elevation model to eliminate distortions due to relief. You can use this product with the Panchromatic, Multispectral, Pseudocolor, or Pansharpen processing templates.

Product type	Processing templates
All SPOT Scene 1A SPOT Scene 2A SPOTView Ortho	All Bands Multispectral Panchromatic Pansharpen Pansharpen and Multispectral Pseudocolor

Use the Pseudocolor processing template to view the SPOT imagery as a natural color image.

Spectral range

Spectral range

Tag	Band order	Wavelength (nm)	Description
MS	1	500–590	Green
MS	2	610–680	Red
MS	3	790–890	Near infrared
MS	4	1580–1750	Shortwave infrared
Pan	1	510–730	Panchromatic

Caution:

The SPOT DIMAP GeoTIFF product has a unique rearrangement of the band order, which allows you to open it directly in applications and see a standard false color image; however, the metadata references have not been rearranged. This can create some difficulty when you are trying to define specific functions, such as NDVI, because the near infrared band will be band 1 and not band 3. The raster type attempts to account for this modification; however, there may be unique cases where the metadata and file format are not designed as expected.

Spectral range	Metadata reference	DIMAP GeoTIFF
Blue	n/a	n/a
Green	1 (or XS 1)	3
Red	2 (or XS 2)	2
NIR	3 (or XS 3)	1
SWIR	4 (or XS 4 or SWIR)	4

For more information, see Airbus Defence and Space.

SPOT 6 and SPOT 7

The SPOT 6 and SPOT 7 raster types allow you to add raster data collected from the SPOT 6 and SPOT 7 satellites. To learn more about this sensor, see Airbus Defence and Space .

There are various products supported by SPOT 6 and SPOT 7.

Product type	Processing templates
All ORTHO ORTHO DISPLAY ORTHO REFLECTANCE PRIMARY PRIMARY DISPLAY PRIMARY REFLECTANCE PROJECTED PROJECTED DISPLAY PROJECTED REFLECTANCE	All Bands Multispectral Multispectral Display Multispectral Reflectance Panchromatic Panchromatic Display Panchromatic Reflectance Pansharpen Pansharpen and Multispectral Pansharpen Display Pansharpen Reflectance

Spectral range

Spectral range

Tag	Band order	Wavelength (nm)	Description
MS	1	450–520	Blue
MS	2	530–590	Green
MS	3	625–695	Red
MS	4	760–890	Near Infrared
Pan	1	450–745	Panchromatic

TH-01

TH-01 is the first Chinese transmission type satellite. Launched on August 24, 2010, TH-01 has a triple stereo surveying and mapping sensor and a high-resolution multispectral sensor. It collects triplet stereo images, high-resolution images, and multispectral images globally. TH-01 is widely used in science research, land resource research, surveying, and mapping. The data comes as a Level 1 and Level 2 product.

Spectral range

Spectral range

Tag	Band order	Wavelength (nm)	Description
Pan-FWD	1	510–690	Pan-Forward
Pan-BWD	1	510–690	Pan-Backward
Pan-NAD	1	510–690	Pan-Nadir
MS	1	430–520	Blue
MS	2	520–610	Green
MS	3	610–690	Red
MS	4	760–900	Infrared

Product type	Processing templates
Level 1 Level 2	All Bands Double Line Stereo Multispectral Panchromatic BWD Panchromatic FWD Panchromatic NAD Pan sharpen Pan sharpen and Multispectral Three Line Stereo

WorldView-1

The WorldView raster types allow you to add raster data collected from the WorldView-1, WorldView-2, or WorldView-3 satellite sensors. To learn more about these sensors, see DigitalGlobe .

WorldView-1 products

Product type	Processing templates
All Basic Standard Standard Orthoready Orthorectified	Panchromatic

WorldView-1 spectral range

WorldView-1 spectral range

Tag	Band order	Wavelength (nm)	Description
Pan	1	400–900	Panchromatic

WorldView-2

The WorldView raster types allow you to add raster data collected from the WorldView-1, WorldView-2, or WorldView-3 satellite sensors. To learn more about these sensors, see DigitalGlobe .

WorldView-2 products

Product type	Processing templates
All Basic Orthorectified Orthorectified AComp Standard Standard AComp Standard Orthoready Standard Orthoready AComp	All Bands Multispectral Multispectral AComp Panchromatic Panchromatic AComp Pansharpen Pansharpen AComp Pansharpen and Multispectral

WorldView-2 spectral range

WorldView-2 spectral range

Tag	Band order	Wavelength (nm)	Description
Pan	1	450–800	Panchromatic
MS	1	400–450	Coastal blue
MS	2	450–510	Blue
MS	3	510–580	Green
MS	4	585–625	Yellow
MS	5	630–690	Red
MS	6	705–745	Red edge
MS	7	770–895	Near infrared 1
MS	8	860–1040	Near infrared 2

WorldView-3

The WorldView raster types allow you to add raster data collected from the WorldView-1, WorldView-2, or WorldView-3 satellite sensors. To learn more about these sensors, see DigitalGlobe . Currently, the raster type for WorldView-3 only includes support for the visible, near infrared, and shortwave infrared (SWIR) bands, but not for CAVIS.

WorldView-3 products

Product type	Processing templates
All Basic Orthorectified Orthorectified AComp Standard Standard AComp Standard Orthoready Standard Orthoready AComp	All Bands Multispectral Multispectral AComp Panchromatic Panchromatic AComp Pansharpen Pansharpen AComp Pansharpen and Multispectral

WorldView-3 spectral range

WorldView-3 spectral range

Tag	Band order	Wavelength (nm)	Description
Pan	1	450–800	Panchromatic
MS	1	400–450	Coastal blue
MS	2	450–510	Blue
MS	3	510–580	Green
MS	4	585–625	Yellow
MS	5	630–690	Red
MS	6	705–745	Red edge
MS	7	770–895	Near infrared 1
MS	8	860–1040	Near infrared 2
SWIR	1	1195–1225	Shortwave infrared 1
SWIR	2	1550–1590	Shortwave infrared 2
SWIR	3	1640–1680	Shortwave infrared 3
SWIR	4	1710–1750	Shortwave infrared 4
SWIR	5	2145–2185	Shortwave infrared 5
SWIR	6	2185–2225	Shortwave infrared 6
SWIR	7	2235–2285	Shortwave infrared 7
SWIR	8	2295–2365	Shortwave infrared 8

WorldView-4

WorldView-4, is a third generation commercial Earth observation satellite that has a maximum resolution of 31 cm. These are similar imagery as WorldView-3, the highest resolution commercially available at the time of its launch.

Currently ArcGIS supports the View-Ready/Standard Orthoready (OR2A) product and the System-Ready/Basic (1B). To learn more about these sensors, see DigitalGlobe .

WorldView-4 products

Product type	Processing templates
All Basic Standard Orthoready	All Bands Multispectral Panchromatic Pansharpen Pansharpen and Multispectral

WorldView-4 spectral range

WorldView-4 spectral range

Tag	Band order	Wavelength (nm)	Description
Pan	1	450–800	Panchromatic
MS	1	450-510	Blue
MS	2	510-580	Green
MS	3	655-690	Red
MS	4	780-920	NearInfrared

ZY02C HRC raster type

The ZY02C HRC raster type allows you to add raster data collected from the ZY-1 02C satellite.

The ZY02C HRC sensor has two product types:

• Level 1A—This product has had radiometric correction but no geometric correction.
• Level 2A—This product has been radiometric corrected and georeferenced.

Product type	Processing templates
All Level 1A Level 2A	HRC1 (panchromatic of high-resolution camera) HRC2 (panchromatic of high-resolution camera) HRC (mosaic of the two panchromatic images)

Spectral range

Spectral range

Tag	Band order	Wavelength (nm)	Description
HRC1	1	450–950	Panchromatic
HRC2	1	450–950	Panchromatic
HRC	1	450–950	Panchromatic

To learn more about these sensors, refer to the China Centre for Resource Satellite Data and Application website.

ZY02C PMS raster type

The ZY02C PMS raster type allows you to add raster data collected from the ZY-1 02C satellite.

Product type	Processing templates
All Level 1 Level 2	All Bands Multispectral Panchromatic Pan sharpen Pan sharpen and Multispectral

Spectral range

Spectral range

Tag	Band order	Wavelength (nm)	Description
Pan	1	510–850	Panchromatic
MS	1	520–590	Green
MS	2	630–690	Red
MS	3	770–890	Near infrared

To learn more about these sensors, refer to the China Centre for Resource Satellite Data and Application website.

ZY3-CRESDA

The ZY3-CRESDA raster type allows you to add raster data collected from the ZY-3 satellite, which is distributed by China Center for Resources Satellite Data and Application (CRESDA).

Product type	Processing templates
All Level 1 Level 2 Note: Other types of products produced by CRESDA can be supported by using the Raster Dataset or Table type.	All Bands Multispectral Panchromatic Pan sharpen Pan sharpen and Multispectral Double Line Stereo Three Line Stereo

Spectral range

Spectral range

Tag	Band order	Wavelength (nm)	Description
Pan FWD	1	500–800	FWD-Panchromatic
Pan BWD	1	500–800	BWD-Panchromatic
Pan	1	500–800	Panchromatic
MS	1	430–520	Blue
MS	2	520–600	Green
MS	3	630–690	Red
MS	4	760–900	Near infrared

To learn more about these sensors, refer to the China Centre for Resource Satellite Data and Application website.

ZY3-SASMAC

The ZY3-SASMAC raster type allows you to add raster data collected from the ZY-3 satellite and distributed by Satellite Surveying and Mapping Application Center (SASMAC).

Product type	Processing templates
All Level 1 Note: Other types of product produced by SASMAC can be supported by using the Raster Dataset or Table type.	All Bands Multispectral Panchromatic Pan sharpen Pan sharpen and Multispectral Double Line Stereo Three Line Stereo

Spectral range

Spectral range

Tag	Band order	Wavelength (nm)	Description
Pan FWD	1	500–800	FWD-Panchromatic
Pan BWD	1	500–800	BWD-Panchromatic
Pan	1	500–800	Panchromatic
MS	1	430–520	Blue
MS	2	520–600	Green
MS	3	630–690	Red
MS	4	760–900	Near infrared