Offset Method—ArcGIS Pro

Returns offset version of the input geometry. The offset operation creates a geometry that is a constant distance from an input polyline or polygon. It is similar to buffering, but produces a one sided result. If offset distance > 0, then the offset geometry is constructed to the right of the oriented input geometry, otherwise it is constructed to the left. For a simple polygon, the orientation of outer rings is clockwise and for inner rings it is counter clockwise. So the "right side" of a simple polygon is always its inside. The bevelRatio is multiplied by the offset distance and the result determines how far a mitered offset intersection can be from the input curve before it is beveled.

Syntax

C#
Visual Basic (Declaration)

public Geometry Offset( 
   Geometry geometry,
   double distance,
   OffsetType offsetType,
   double bevelRatio
)

Public Function Offset( _
   ByVal geometry As Geometry, _
   ByVal distance As Double, _
   ByVal offsetType As OffsetType, _
   ByVal bevelRatio As Double _
) As Geometry

Parameters

geometry: The geometry to calculate offset for. MapPoint and Multipoint are not supported.
distance: The offset distance for the geometry.
offsetType: The offset type of the offset geometry.
bevelRatio: The ratio used to produce a bevel join instead of a miter join (used only when joins is miter).

Return Value

Returns the result of the offset operation.

Exceptions

Exception	Description
System.ArgumentNullException	Geometry is null or empty.
System.NotImplementedException	The method is not implemented for GeometryBag or Multipatch.

Remarks

GeometryEngine Offset

Example

List<MapPoint> linePts = new List<MapPoint>();
linePts.Add(MapPointBuilder.CreateMapPoint(1.0, 1.0, SpatialReferences.WGS84));
linePts.Add(MapPointBuilder.CreateMapPoint(10.0, 1.0, SpatialReferences.WGS84));

Polyline polyline = PolylineBuilder.CreatePolyline(linePts);

Geometry g = GeometryEngine.Instance.Offset(polyline, 10, OffsetType.Square, 0);
Polyline gResult = g as Polyline;
// gResult.PointCount = 2
// gResult.Points[0] = (1, -9)
// gResult.Points[1] = (10, -9)

g = GeometryEngine.Instance.Offset(polyline, -10, OffsetType.Round, 0.5);
gResult = g as Polyline;
// gResult.PointCount = 2
// gResult.Points[0] = (1, -11
// gResult.Points[1] = (10, 11)


//
// elliptic arc curve
//
Coordinate2D fromPt = new Coordinate2D(2, 1);
Coordinate2D toPt = new Coordinate2D(1, 2);
Coordinate2D interiorPt = new Coordinate2D(1 + Math.Sqrt(2) / 2, 1 + Math.Sqrt(2) / 2);

EllipticArcSegment circularArc = EllipticArcBuilder.CreateEllipticArcSegment(fromPt.ToMapPoint(), toPt.ToMapPoint(), interiorPt);

polyline = PolylineBuilder.CreatePolyline(circularArc);
g = GeometryEngine.Instance.Offset(polyline, -0.25, OffsetType.Miter, 0.5);
gResult = g as Polyline;

g = GeometryEngine.Instance.Offset(polyline, 0.25, OffsetType.Bevel, 0.5);
gResult = g as Polyline;


//
//  offset for a polygon
//
List<MapPoint> list = new List<MapPoint>();
list.Add(MapPointBuilder.CreateMapPoint(10.0, 10.0, SpatialReferences.WGS84));
list.Add(MapPointBuilder.CreateMapPoint(10.0, 20.0, SpatialReferences.WGS84));
list.Add(MapPointBuilder.CreateMapPoint(20.0, 20.0, SpatialReferences.WGS84));
list.Add(MapPointBuilder.CreateMapPoint(20.0, 10.0, SpatialReferences.WGS84));

Polygon polygon = PolygonBuilder.CreatePolygon(list);

g = GeometryEngine.Instance.Offset(polygon, 2, OffsetType.Square, 0);
Polygon gPolygon = g as Polygon;

g = GeometryEngine.Instance.Offset(polygon, -2, OffsetType.Round, 0.3);
gPolygon = g as Polygon;

g = GeometryEngine.Instance.Offset(polygon, -0.5, OffsetType.Miter, 0.6);
gPolygon = g as Polygon;

Requirements

Target Platforms: Windows 10, Windows 8.1

Reference

GeometryEngine Class
GeometryEngine Members