ArcGIS Pro keyboard shortcuts

Keyboard shortcuts are provided in ArcGIS Pro to enhance productivity and help you save time while completing common workflows

Keyboard shortcuts are categorized by functional area. To learn more about each functionality and when you can use a category of keyboard shortcuts, click the link following the table.

Note:

This is a complete list of keyboard shortcuts available in ArcGIS Pro and is updated at every software release.

Some of the shortcuts listed here are keys that enhance mouse action; however, ArcGIS Pro can also be used without a mouse. For more information, see Use ArcGIS Pro with a keyboard.

General application

General keyboard shortcuts for ArcGIS Pro

Keyboard shortcut	Action
Ctrl+O	Open a project.
Ctrl+N	Create a project.
Ctrl+S	Save the project.
Ctrl+M	Open a new map.
Shift+C	Open a new catalog view.
Alt+F4	Exit ArcGIS Pro.
F1	Open the help system to the default home page or context-sensitive help for a tool. Learn more about context-sensitive help in ArcGIS Pro
Ctrl+F1	Show or hide the ribbon.
Ctrl+Z	Undo a change.
Ctrl+Y	Redo a change.
Delete	Delete the selection.
Alt or F10	Enable access keys and show KeyTips on the ribbon.
Alt+Hyphen (-)	Access options to float, dock, or close the active view or pane.
Right arrow key or Left arrow key	Move from one tab to another on the ribbon or in a pane.
Tab or Shift+Tab	Move among commands or items on the ribbon, pane, view, or dialog box.
Up arrow key or Down arrow key	Move among elements in a list.
Alt+Down arrow key	Open a drop-down menu or list.
Esc	Close a drop-down menu or list.
Enter or Spacebar	Run a command.
Windows Menu key	Open a context menu (pop-up menu).
Ctrl+Tab or Alt+F7	Change the active view or pane. Note: A window displays the active panes and views in the project. Use the arrow keys to move to the view or pane you want to make active. Press Enter.
Ctrl+F6	Change the active view.
Ctrl+F4	Close a view.
Shift+Esc	Close an active pane.
Alt+L	Open the Sign-In Status menu.
Alt+W	Open the Notifications pane.

Animation

Keyboard shortcuts for animations

Keyboard shortcut	Action
Ctrl+Right arrow	Move to the next keyframe .
Ctrl+Left arrow	Move to the previous keyframe .
Spacebar	Play or pause the steps.
Ctrl+Insert	Append a new keyframe to the end of the animation after the last keyframe.
Shift+Insert	Update or set a keyframe. If a keyframe exists at the current time, it is updated. Otherwise, a new keyframe is inserted at the current time between two keyframes.
Ctrl+Shift+Delete	Delete the current keyframe.

For more information about animations, see Animation basics.

Catalog

Except where noted, these keyboard shortcuts work in the Catalog pane, in catalog views, in the Contents pane of a catalog view, and on browse dialog boxes.

Keyboard shortcuts for catalog operations

Keyboard shortcut	Action	Comment
F2	Rename the selected item.
Shift+F2	Alias the selected folder connection or change its alias.
F5	Refresh the contents of the selected item.
Ctrl+C	Copy the selected item.	Does not work on browse dialog boxes.
Ctrl+V	Paste the selected item.	Does not work on browse dialog boxes.
Ctrl+X	Cut the selected item.	Does not work on browse dialog boxes.
Ctrl and drag	Copy the selected item to a location where dragging would move it by default.	Does not work on browse dialog boxes.
Shift and drag	Move the selected item to a location where dragging would copy it by default.	Does not work on browse dialog boxes.
Ctrl+Alt+P	Copy the path of the selected item.
Ctrl+Shift+T	Open the attribute table for the selected item as a stand-alone table.	Does not work on browse dialog boxes.
Ctrl+D	Delete the selected item.

For more information, see Catalog pane, catalog views, and browse dialog boxes.

Contents pane

Keyboard shortcuts for the Contents pane

Keyboard shortcut	Action
Esc	Return keyboard focus to the map from the Contents pane.
Hyphen (-) or Left arrow key	Collapse selected items.
Plus sign (+) or Right arrow key	Expand selected items.
Ctrl and click an expansion control; Ctrl+Plus sign (+) or Hyphen (-); or Ctrl+Left arrow or Right arrow key	Expand or collapse all items at that hierarchical level.
Ctrl+Shift and click an expansion control; Ctrl+Shift+Plus sign (+) or Hyphen (-); or Ctrl+Shift+Left arrow or Right arrow key	Expand or collapse all items at all hierarchical levels.
Spacebar	Turn on or off selected layers.
Ctrl+Spacebar	Turn on or off all layers when a single layer is selected in the Contents pane. If the selected layer is part of a group layer or a composite layer, all the members of that layer will be turned on or off. If multiple layers are selected, Ctrl+Spacebar works the same as Spacebar and turns only the selected layers on or off.
Ctrl and click a check box	Turn on or off all layers at that hierarchical level.
Ctrl+Shift and click a check box	Turn on or off all layers at all hierarchical levels.
Alt and click a check box	Turn off all layers except the one whose check box you clicked.
F2	Rename the selected item.
F12 or Enter	Open the Properties dialog box for a selected item.
Ctrl and click; Shift and click; Ctrl+Up arrow or Ctrl+Down arrow; Shift+Up arrow or Shift+Down arrow.	Select multiple layers in the Contents pane.
Ctrl+L	When a layout is the active view, lock or unlock the item selected in the Contents pane.
Ctrl+Shift+L	When a layout is the active view, lock or unlock all items at that hierarchical level in the Contents pane.
Alt and click a layer's name	Zoom to the extent of that layer.
Delete	Delete the item selected in the Contents pane.
Ctrl+T	Open the table of the layer or table selected in the Contents pane.

For more information about the Contents pane, see Contents pane.

Data Engineering view

The following keyboard shortcuts are available in the Data Engineering view:

Keyboard shortcuts for the Data Engineering view

Keyboard shortcut	Action
Ctrl+Shift+D	Open a Data Engineering view from a selected layer.
Ctrl+Alt+F5	Calculate statistics for fields in the statistics table.
Ctrl+Alt+C	Show all columns in the statistics table, if any are hidden.
Ctrl+Alt+A	Open the attribute table.
Ctrl+Alt+F	Open the Fields view of the attribute table.
Ctrl+Alt+N	Turn the display of numeric fields on and off in the statistics table.
Ctrl+Alt+T	Turn the display of text fields on and off in the statistics table.
Ctrl+Alt+D	Turn the display of date fields on and off in the statistics table.
Ctrl+Shift+A	Switch between displaying field names and aliases in the fields panel.

For more information about the Data Engineering view, see Introduction to Data Engineering.

Editing

The following keyboard shortcuts are available for various editing operations and tools:

General editing

Keyboard shortcuts for general editing functions

Keyboard shortcut	Action	Comment
Ctrl+Shift+M	Open the Modify Features pane.
Ctrl+Shift+C	Open the Create Features pane.
C and drag	Pan .	Pan the view.
X and drag	Zoom out .	Press X and drag the pointer. Release the pointer to zoom out.
Z and drag	Zoom in or out .	Zoom the view in or out.
T	Show vertices.	Press and hold to show vertices of existing features near the pointer as you draw a new line.
Spacebar	Snapping .	Press and hold to turn snapping on or off as you create or modify features.
Esc or Ctrl+Delete	Cancel edits .	Deactivate the current interactive editing tool and cancel any unfinished edits.
F2	Finish .	Apply your changes to the current feature and complete the active operation.

Undo and redo

Keyboard shortcuts for undo and redo functions

Keyboard shortcut	Action	Comment
Ctrl+Z	Undo .	Incrementally undo actions and edits recorded in the undo stack.
Ctrl+Y	Redo .	Incrementally restore actions and edits recorded in the undo stack.

Selection tools

Keyboard shortcuts for the selection tools

Keyboard shortcut	Action	Comment
Shift+ Select	Add the selected feature .	Add the selected feature to the current selection. Note: When using editing tools that sketch geometry such as the Reshape tool , this shortcut pauses the sketch mode and allows you to add features to the selection.
Ctrl+ Select	Remove the selected feature .	Remove the selected feature from the current selection.
Ctrl+Shift+ Select	Select only this feature .	Keep the selected feature and remove all other features from the current selection.

Tables

Keyboard shortcuts for tables in tool and template panes

Keyboard shortcut	Action	Comment
Ctrl+C	Copy the selection.	Copy the selected value in the cell.
Ctrl+V	Paste the selection.	Paste the copied value to the cell.
F2	Edit the cell.	Edit the contents of the current cell.
Esc	Cancel the action.	Cancel the edited value and restore the original value to the cell.

Text formatting tags

Keyboard shortcuts for formatting text

Keyboard shortcut	Action	Comment
Ctrl+U	Apply underline.	Insert inline text formatting tags <UND> the selected text string </UND>.
Ctrl+Shift+A	Apply all caps.	Insert inline text formatting tags <ACP> the selected text string </ACP>.
Ctrl+Shift+K	Apply lowercase.	Insert inline text formatting tags <SCP> the selected text string </SCP>.
Ctrl+Shift+Plus sign (+)	Apply superscript.	Insert inline text formatting tags <SUP> the selected text string </SUP>.
Ctrl+Equal sign (=)	Apply subscript.	Insert inline text formatting tags <SUB> the selected text string </SUB>.

Edit annotation

Keyboard shortcuts for editing annotation

Keyboard shortcut	Action	Comment
Ctrl and drag	Change the Follow Feature distance.	In Follow Feature mode, change the distance between the annotation feature and the boundary feature.
O	Follow Feature Options	In Follow Feature mode, change settings for text alignment, placement constraints, and other annotation options.

Move

Keyboard shortcuts for the Move tool

Keyboard shortcut	Action	Comment
Ctrl and click	Relocate the anchor.	Relocate the selection anchor to the clicked location. You can zoom in to a feature without the current location of the anchor being visible in the active view.
Ctrl and drag	Move the anchor.	Move the selection anchor.

Rotate

Keyboard shortcuts for the Rotate tool

Keyboard shortcut	Action	Comment
A	Angle.	Open the Angle dialog box.
Ctrl and click	Relocate the anchor.	Relocate the selection anchor to the clicked location. You can zoom in to a feature without the current location of the anchor being visible in the active view.
Ctrl and drag	Move the anchor.	Move the selection anchor.
S	Access the secondary anchor.	Turn the secondary anchor on and off. When it is turned on, the anchor is positioned at the pointer location.

Scale

Keyboard shortcuts for the Scale tool

Keyboard shortcut	Action	Comment
F	Apply a scale factor.	Open the Scale dialog box.
Ctrl and click	Relocate the anchor.	Relocate the selection anchor to the clicked location. You can zoom in to a feature without the current location of the anchor being visible in the active view.
Ctrl and drag	Move the anchor.	Move the selection anchor.
S	Access the secondary anchor.	Turn the secondary anchor on and off. When it is turned on, the anchor is positioned at the pointer location.

Edit vertices

Keyboard shortcuts for the Edit Vertices tool

Keyboard shortcut	Action	Comment
T and hover	Show vertices within the snapping tolerance.	Flash a square at vertices that are within the current snapping tolerance of the pointer.
Shift and click vertices	Select multiple vertices.	Drag multiple segments in unison between the selected vertices.
Shift and click segments	Select all vertices between the clicked segments.	Drag multiple segments in unison between the selected vertices.
A and click	Add a vertex .	Create a vertex where you click a segment.
D and click	Delete a vertex .	Delete the clicked vertex.
H and drag	Edit the elevation.	Move a z-enabled vertex vertically and preserve its x,y coordinates. Hover over a control handle until the pointer becomes a vertex and drag the vertex. This shortcut is available in 3D scenes.
Ctrl and drag	Move a Bézier curve.	Move a Bézier curve and preserve its shape. Hover over a curve until the pointer becomes a segment, and drag the curve.
Ctrl and drag	Move a Bézier handle.	Move a Bézier control handle that can't otherwise be selected when it is coincident with another vertex. Hover over a control handle until the pointer becomes a vertex and drag the handle.
Ctrl+H	Move the z-value to the pointer.	Move the z-value for the selected vertex to the elevation of the pointer. The x- and y-values are preserved. This is available only when stereoscopic mode is enabled.
Ctrl+G	Move the pointer z-value.	Move the pointer z-value to the elevation of the selected vertex. This is available only when stereoscopic mode is enabled.

Geometry properties table

Keyboard shortcuts for the geometry properties table

Keyboard shortcut	Action	Comment
Down arrow key	Advance to the next vertex.	Advance to the next vertex and flash it on the map.
Up arrow key	Return to the previous vertex.	Return to the previous vertex and flash it on the map.
Shift and click	Select inclusive rows.	Select all rows between the first and last row you click.
Ctrl and click	Select multiple rows.	Select multiple rows.
Shift+Down arrow	Add the next vertex.	Add the next vertex to the selection and flash it on the map. Rows are deselected if you switch arrow keys while pressing Shift.
Shift+Up arrow	Add the previous vertex.	Add the previous vertex to the selection and flash it on the map. Rows are deselected if you switch arrow keys while pressing Shift.
Ctrl+U	Switch the selection.	Deselect the current selection and select all unselected rows.
Ctrl+A	Select all vertices.	Select all vertices.
Ctrl+Spacebar	Select or deselect the row.	Select or deselect the current row.
Tab	Advance to the next field.	Apply the current edit and go to the next column. If at the end of a row, go to the first cell in the next row.
Ctrl+Enter	Apply the edit and go to the next row.	Apply the current edit and go to next row in the same column.
Shift+Enter	Apply the edit and go to the previous row.	Apply the current edit and go to the previous row in the same column.

Create annotation

Keyboard shortcuts for annotation construction tools

Keyboard shortcut	Action	Comment
Ctrl+W	Find text .	Replace the text string in the text box with the label expression or field value from the topmost selected feature layer. When you select feature-linked annotation, the text is calculated from the origin feature class. If it can't be calculated, the word Text is used.
N	Find the next text.	Step through the selected annotation features when using Find Text .
F6	Specify absolute X,Y,Z .	Open the Absolute X,Y,Z dialog box.
Tab	Switch sides and Flip annotation .	Flip unfinished text 180 degrees and to the left or right side of the followed edge. This shortcut is available when you create text with Follow feature .
O	Use the Follow Feature options.	Open the Editor Settings dialog box. This shortcut is available when you create text with Follow feature .
Ctrl and drag	Change the Follow Feature distance.	In Follow Feature mode, change the distance between the annotation feature and the boundary feature.

Create point features

Keyboard shortcuts for point construction tools

Keyboard shortcut	Action	Comment
F6	Specify absolute X,Y,Z .	Open the Absolute X,Y,Z dialog box.

Create polyline and polygon features

Keyboard shortcuts for polyline and polygon construction tools

Keyboard shortcut	Action	Comment
F6	Specify absolute X,Y,Z .	Open the Absolute X,Y,Z dialog box.
A	Specify the direction .	Open the Direction dialog box.
D	Specify the distance .	Open the Distance dialog box.
G	Specify the direction and distance .	Open the Direction and Distance dialog box.
F	Specify deflection .	Open the Deflection dialog box.
F7	Specify segment deflection .	Open the Segment Deflection dialog box.
P	Make the line parallel .	Constrain the direction of a new line segment parallel to another segment. Hover over an existing segment and press the keyboard shortcut. Release the key to set the constraint and flash the segment to which it is constrained.
E	Make the line perpendicular .	Constrain the direction of a new line segment perpendicular to another segment. Hover over an existing segment and press the keyboard shortcut. Release the key to set the constraint and flash the segment to which it is constrained.
Esc or Ctrl+Delete	Cancel the edits .	Cancel an unfinished feature.
F3	Square and finish the feature .	Autocomplete the last two segments at right angles and finish the feature.
F4 or Shift+double-click	Finish the current part .	Apply your changes to the current part and leave the construction tool active to create another part for the feature.
Spacebar	Turn snapping on and off .	Temporarily turn snapping off when you press and hold the spacebar. Temporarily turn snapping on when you are creating freehand polyline or polygon features.

Create arc segments

Keyboard shortcuts for the Arc segment construction tool

Keyboard shortcut	Action	Comment
R	Specify a radius.	Open the Radius dialog box.

Create endpoint arc segments

Keyboard shortcuts for the End Point Arc segment construction tool

Keyboard shortcut	Action	Comment
R	Specify a radius.	Open the Radius dialog box.

Create by tracing

Keyboard shortcuts for the Trace segment construction tool

Keyboard shortcut	Action	Comment
O	View the options.	Open the Options dialog box.
Tab	Set a negative offset.	Switch the side of the offset and trace the other side of an edge.
Ctrl and drag	Trace selected features.	Trace only selected features. If Trace selected features is turned on, you can trace selected features and unselect features.

Create by streaming

Keyboard shortcuts for the Streaming construction tool

Keyboard shortcut	Action	Comment
O	View the options.	Open the Options dialog box.
F8	Start or stop streaming.	Begin or stop streaming.

Create a circle

Keyboard shortcuts for the Circle construction tool

Keyboard shortcut	Action	Comment
F6	Specify absolute X,Y,Z .	Open the Absolute X,Y,Z dialog box.
R	Specify a radius.	Open the Radius dialog box.

Create an ellipse

Keyboard shortcuts for the Ellipse construction tool

Keyboard shortcut	Action	Comment
F6	Specify absolute X,Y,Z .	Open the Absolute X,Y,Z dialog box.
A	Specify the direction .	Open the Direction dialog box.
Shift and drag	Make the geometry a circle .	Constrain the geometry to a circle. Create the first point of the ellipse, press the keyboard shortcut, and drag.

Create a rectangle

Keyboard shortcuts for the Rectangle construction tool

Keyboard shortcut	Action	Comment
Tab	Turn Horizontal / Grid Aligned on or off.	When turned on, constrains the feature vertical or horizontal at 90-degree angles.
A	Specify a direction .	Open the Direction dialog box.
L	Specify a length .	Open the Length dialog box.
W	Specify a width .	Open the Width dialog box.
F6	Specify absolute X,Y,Z .	Open the Absolute X,Y,Z dialog box.
Shift and drag	Make the shape a square.	Constrain the shape to a square. Create the first point of the rectangle, press the keyboard shortcut, and drag.
Shift	Turn Square on or off.	When turned on, constrains the shape to a square.

Elevation tools

Keyboard shortcuts for setting z-values for 3D features

Keyboard shortcut	Action	Comment
S	Suspend the sketch plane.	Suspend the current 3D elevation sketch plane while using Get Z from View . This allows you to click and set a z-value at a lower elevation.

Topology error inspector

Keyboard shortcuts for the topology error inspector

Keyboard shortcut	Action	Comment
Up arrow key and Down arrow key	Move the pointer.	Move the pointer up and down the rows in the error table.
Ctrl+Shift+Equal sign (=)	Zoom To .	Zoom the active map to the current error.
D	Show the topology rule.	Show the topology rule the current error violates.
F	Select the features .	Select the primary features causing the error.
X	Mark the error as an exception .	Mark the current error as an exception.
E	Clear the exception .	Clear the current exception and mark the record as an error.
R	Rules	Show the Rules drop-down menu and enable filtering for topology rules. The main view of Error Inspector must be active.
M	Map Extent	Show errors in the current map extent.
Z	Validate	Identify topology errors and symbolize them on layers in the current map extent.
Ctrl+U	Switch	Switch selected rows.
Ctrl+Shift+A	Clear	Unselect all selected rows.
Ctrl+8	Flash	Right-click the error row number and flash the shape of the error feature in the map.
Ctrl+Equal sign (=)	Zoom To	Right-click the error row number and zoom in and center the map on the error feature in the current row.
Ctrl+Spacebar	Select/Unselect	Right-click the error row number and toggle the selection of the current row.
R	Rule Description	Right-click the error row number and view a description and an example graphic of the rule violated by this error.

For more information about editing, see A quick tour of editing.

Exploratory analysis

The following keyboard shortcuts are available for various exploratory analysis tools:

Line of sight with observer point selected

Keyboard shortcuts for line of sight with the observer point selected

Keyboard shortcut	Action
A	Rotate counterclockwise.
D	Rotate clockwise.
Ctrl+Up arrow	Move the observer away from the scene camera.
Ctrl+Down arrow	Move the observer toward the scene camera.
Ctrl+Right arrow	Move the observer right, perpendicular to the scene camera heading.
Ctrl+Left arrow	Move the observer left, perpendicular to the scene camera heading.
Ctrl+Shift+Up arrow	Move the observer and its targets away from the scene camera.
Ctrl+Shift+Down arrow	Move the observer and its targets toward the scene camera.
Ctrl+Shift+Right arrow	Move the observer and its targets right, perpendicular to the scene camera heading.
Ctrl+Shift+Left arrow	Move the observer and its targets left, perpendicular to the scene camera heading.
Ctrl+U	Increase the observer elevation.
Ctrl+J	Decrease the observer elevation.
C	Turn the Explore tool on and off to navigate.
Delete	Delete the observer and all associated targets.

Line of sight with target selected

Keyboard shortcuts for line of sight with the target selected

Keyboard shortcut	Action
Ctrl+Up arrow	Move the target away from the camera.
Ctrl+Down arrow	Move the target toward the camera.
Ctrl+Right arrow	Move the target right, perpendicular to the scene camera heading.
Ctrl+Left arrow	Move the target left, perpendicular to the scene camera heading.
Ctrl+U	Increase the target elevation.
Ctrl+J	Decrease the target elevation.
C	Turn the Explore tool on and off to navigate.
Delete	Delete the selected target.

Selected view dome

Keyboard shortcuts for selected view domes

Keyboard shortcut	Action
Ctrl+Up arrow	Move the view dome away from the camera.
Ctrl+Down arrow	Move the view dome toward the camera.
Ctrl+Right arrow	Move the view dome right, perpendicular to the scene camera heading.
Ctrl+Left arrow	Move the view dome left, perpendicular to the scene camera heading.
Ctrl+U	Increase the view dome elevation.
Ctrl+J	Decrease the view dome elevation.
C	Turn the Explore tool on and off to navigate.
Delete	Delete the selected view dome.

Selected viewshed

Keyboard shortcut for selected viewsheds

Keyboard shortcut	Action
W	Tilt the observer up.
S	Tilt the observer down.
A	Rotate the observer heading left.
D	Rotate the observer heading right.
Ctrl+Up arrow	Move the observer forward.
Ctrl+Down arrow	Move the observer backward.
Ctrl+Right arrow	Move the viewshed right, perpendicular to the observer heading.
Ctrl+Left arrow	Move the viewshed left, perpendicular to the observer heading.
Ctrl+U	Increase the observer elevation.
Ctrl+J	Decrease the observer elevation.
C	Turn the Explore tool on and off to navigate.
Delete	Delete the selected viewshed.

Selected slice

Keyboard shortcuts for selected slices

Keyboard shortcut	Action
W	Rotate the plane heading forward.
S	Rotate the plane heading backward.
A	Rotate the plane heading left.
D	Rotate the plane heading right.
Ctrl+Up arrow	Move the plane forward.
Ctrl+Down arrow	Move the plane backward.
Ctrl+Right arrow	Move the slice right.
Ctrl+Left arrow	Move the slice left.
Ctrl+U	Increase the plane elevation.
Ctrl+J	Decrease the plane elevation.
C	Turn the Explore tool on and off to navigate.
Delete	Delete the selected slice.

For more information about using these shortcut keys, see Keyboard shortcuts for exploratory analysis.

Layouts

Keyboard shortcuts for working with layouts

Keyboard shortcut	Action
Ctrl+A	Select all the elements on the page.
Ctrl+Backspace	Deselect all the elements on the page.
Shift+Down arrow or Shift+Up arrow	Continuously select elements. Elements are deselected if you switch arrow keys while pressing Shift.
Delete	Delete the selected elements.
Ctrl+C	Copy the selected elements to the clipboard.
Ctrl+X	Cut the selected elements.
Ctrl+V	Paste the contents of the clipboard to the page.
Ctrl and drag	Immediately copy the selected elements to the layout without a paste command.
Ctrl+G	Group the selected elements.
Ctrl+Shift+G	Ungroup the selected group.
Spacebar	Switch the visibility of the selected elements.
Shift+Up arrow, Shift+Down arrow, Shift+Left arrow, or Shift+Right arrow	Move selected elements 5 points.
Ctrl+Up arrow, Ctrl+Down arrow, Ctrl+Left arrow, or Ctrl+Right arrow	Move selected elements .5 points.
Up arrow key, Down arrow key, Left arrow key, or Right arrow key	Pan in the direction of the arrow key.
Insert	Zoom to the full page.
Hyphen (-)	Zoom out.
Plus sign (+)	Zoom in.
Shift+right-click	Zoom box.
C	Override the active tool with the Explore tool.
Q	Roam.
X	Zoom out incrementally.
Z	Zoom continuously.
<	Go to the previous extent.
>	Go to the next extent.
1	Zoom and pan on the layout while a map frame is active.

For more information about using these shortcut keys, see Keyboard shortcuts for working on the layout.

Map navigation

The following keyboard shortcuts are available for navigating in the map view:

Regardless of the active tool

Keyboard shortcuts for map navigation regardless of the active tool

Keyboard shortcut	Action	Comment
Insert	Zoom to full extent.
Hyphen (-)	Zoom out.
Plus sign (+)	Zoom in.
Ctrl+Alt+S	Activate the Select tool.
Ctrl+Alt+C	Activate the Explore tool.
C	Override the active tool with the Explore tool.	Press and hold C to use the Explore tool when you are in the middle of another task using another tool. Left button drag—Pan Left button click—Pop-up Wheel button scroll—Zoom Wheel button click and drag—Tilt and rotate in 3D Right button drag—Continuous zoom in and out Press C+Shift or C+Ctrl while using another tool to center and zoom in, or center, respectively.
Alt and click layer(s) in Contents pane	Zoom to the layer's extent.
Z	Zoom continuously.	Press Z while dragging the mouse button to change the active tool to a continuous zoom in or zoom out mode.
X and click	Zoom out incrementally.	Click to zoom out incrementally away from your data.
V and drag	Rotate around a point.	Click and drag while pressing V to rotate around the pivot point where you click.
V+arrow keys	Rotate around the center of the view.	Press V with the Up arrow key, Down arrow key, Left arrow key, or Right arrow key to rotate around the center of the view.
B and drag	Look around a 3D scene.	In a 3D scene, click and drag while pressing B to turn the camera and look around from the place where you click.
B+arrow keys	Look around from the current position.	In a 3D scene, press B while pressing the Up arrow key, Down arrow key, Left arrow key, or Right arrow key to manipulate the camera to look around its current location.
<	Go to the previous extent.
>	Go to the next extent.
Q	Roam.	Press Q while moving the pointer. In 2D, the view is panned in the direction indicated. The farther the pointer is from the center of the view, the faster panning occurs. In 3D, the camera's attitude and altitude are maintained as the view is panned in the direction indicated by the pointer, away from the center of the view.
Shift+Q	Decrease the roam speed.
Ctrl+Q	Increase the roam speed.
Arrow keys	Move the view left, right, up, or down.	You can repeatedly press the arrow key you need for fine-tuned panning adjustments, or press while moving the pointer in one direction.
U	Move up, away from the view.	In 2D, this behaves the same as continuous zoom out. In 3D, the camera lifts up vertically.
J	Move down, closer to the view.	In 2D, this behaves the same as continuous zoom in. In 3D, the camera moves down vertically.
Page Up	Jump one screen size up.	In 2D, pan jumps forward one screen width. In 3D, the camera jumps forward one screen width while maintaining camera angle and altitude.
Page Down	Jump one screen size down.	In 2D, pan jumps down one screen width. In 3D, the camera jumps down one screen width while maintaining camera angle and altitude.
Home	Jump one screen size to the left.	In 2D, pan jumps left one screen width. In 3D, the camera jumps left one screen width while maintaining camera angle and altitude.
End	Jump one screen size to the right.	In 2D, pan jumps right one screen width. In 3D, the camera jumps right one screen width while maintaining camera angle and altitude.
Esc	Cancel map drawing.
F5	Refresh the active view.
Ctrl+F	Open the Locate pane.	To learn more about the Locate pane, see Find places on the map.

With the Explore tool activated

Keyboard shortcuts for navigating the map with the Explore tool activated

Keyboard shortcut	Action	Comment
P	In a 3D scene, look straight down (perpendicular).	Press the key once and the view automatically shifts so it is looking straight down on top of your data.
N	Adjust the view to point north.	If you have rotated your view, reset the orientation to face north.
Shift and drag	Zoom in by drawing a rectangle.
Shift and click	Center and zoom in to the pointer location.
Ctrl and click	Center the view to look at the pointer location.	In 2D, this centers the view. In 3D, the camera turns to center and look at the location.
W	In a 3D scene, tilt the camera up.	This is like tilting the camera from a fixed point.
S	In a 3D scene, tilt the camera down.	This is like tilting the camera from a fixed point.
A	Rotate the view counterclockwise.	This behavior is a camera tilt or a view rotation.
D	Rotate the view clockwise.	This behavior is a camera tilt or a view rotation.

In first-person navigation mode

Keyboard shortcut	Action	Comment
Up arrow key and Down arrow key	Move the camera forward or backward from the center of the view.	Press and hold the Up or Down arrow key to move the camera forward and backward along the camera's current view direction. As the camera moves, point the mouse to set the direction you want to travel. Optionally, use the W and S keys to change direction.
Left arrow key and Right arrow key	Move the camera left or right from the center of the view.	Press and hold the Left or Right arrow key to move the camera left and right perpendicular to the camera's view direction. As the camera moves, point the mouse to set the direction you want to move perpendicular to. Optionally, use the A and D keys to change direction. Using the arrow keys and the mouse pointer together creates the sense of motion for travel and looking around.
U	Increase the elevation of the camera.
J	Decrease the elevation of the camera.
W	Change the view direction of the scene by tilting the camera up.
S	Change the view direction of the scene by tilting the camera down.
A	Rotate the view counterclockwise.
D	Rotate the view clockwise.

With selection tools activated

Keyboard shortcuts for selection tools

Keyboard shortcut	Action
Y	Switch between the Intersect and Within selection modes.
R	Specify a radius when selecting by circle.

For more information about using these shortcut keys, see Keyboard shortcuts for navigation.

ModelBuilder

The following keyboard shortcuts are available for navigating in ModelBuilder:

Clipboard

Keyboard shortcuts for clipboard

Keyboard shortcut	Action
Ctrl+C	Copy the selected model elements.
Ctrl+V	Paste model elements.
Ctrl+X	Cut the selected model elements.

Model

Keyboard shortcuts for model

Keyboard shortcut	Action
Ctrl+N	Create a new model when model view is active.
Ctrl+S	Save the active model.
Ctrl+Shift+S	Save the active model with a different name and location.
Shift+F	Export model to Python file.
Shift+W	Export model to Python window.
Shift+G	Export model to graphic.
Shift+P	Open model properties.
Shift+E	Open model environment setting.
Shift+T	Open model in Geoprocessing pane.
Shift+R	Open model report.
Ctrl+F	Open Find and Replace in model report.

View

Keyboard shortcuts for view

Keyboard shortcut	Action
Ctrl+Shift+A	Auto layout.
Ctrl+Shift+F	Fit to window.
Ctrl+Plus sign (+)	Zoom in on the model view.
Ctrl+Hyphen (-)	Zoom out on the model view.

Mode

Keyboard shortcuts for mode

Keyboard shortcut	Action
Ctrl+A	Select all model elements.
Shift+Arrow keys	Pan in a model.

Validate and Run

Keyboard shortcuts for validate and run

Keyboard shortcut	Action
Ctrl+Shift+V	Validate all data elements and parameter values in a model.
Ctrl+Shift+R	Run. If no model element is selected, run all ready-to-run processes in a model. Otherwise, run the selected tools.

Insert

Keyboard shortcuts for insert

Keyboard shortcut	Action
Ctrl+E	Create a variable.
Ctrl+L	Create label. If no model element is selected, a free-floating label is created. Otherwise, labels are attached to the selected model elements.

Group

Keyboard shortcuts for group

Keyboard shortcut	Action
Ctrl+G	Group. If no element is selected, an empty group is added. Otherwise, a group is added containing the selected elements.
Ctrl+U	Ungroup. Remove all elements from the selected group.
Ctrl+Shift+G	Auto layout the group elements when a group is selected.
Ctrl+Right arrow	Expand the selected group in a model.
Ctrl+Left arrow	Collapse the selected group in a model.
Ctrl+Shift+Right arrow	Expand all groups in a model.
Ctrl+Shift+Left arrow	Collapse all groups in a model.

Model element

Keyboard shortcuts for model element

Keyboard shortcut	Action
Ctrl+O	Open the selected model element.
Ctrl+R	Rename the selected model element.
Ctrl+P	Turn the Parameter setting on and off for the selected model elements.
Ctrl+D	Check Add To Display for the selected model elements.
Ctrl+Shift+D	Uncheck Add To Display for the selected model elements.
Ctrl+I	Check Intermediate Data for the selected model elements.
Ctrl+Shift+I	Uncheck Intermediate Data for the selected model elements.

Range

Keyboard shortcuts for the range slider

Keyboard shortcut	Action	Comment
Ctrl+Shift+Spacebar	Play or Pause.	Play the entire range of steps sequentially, or press the keyboard shortcut again to pause.
Ctrl+Shift+Up arrow	Next step.	Move forward in the range by the step amount defined in the step settings on the Range tab.
Ctrl+Shift+Down arrow	Previous step.	Move backward in the range by the step amount defined in the step settings on the Range tab.

For more information about using the range slider, see How to use the range slider.

Raster and imagery

The following keyboard shortcuts are available for various raster and imagery tools:

Stereo map navigation

Keyboard shortcuts for stereo map navigation

Keyboard shortcut	Action	Comment
Ctrl+Alt+S	Activate the Select tool.
Ctrl+Alt+C	Activate the Explore tool.
Click and drag	Pan the map.
Shift	Accelerate change in x,y.	Move the pointer in the desired direction. Press Shift again to return to the standard speed of change in x,y.
Caps Lock	Decelerate change in x,y.	Move the pointer in the desired direction. Press Caps Lock again to return to the standard speed of change in x,y.
Q	Roam.	Move the pointer in the desired direction.
Plus sign (+) or Ctrl+Mouse wheel	Zoom in.	Zoom in on the map.
Hyphen (-) or Ctrl+Mouse wheel	Zoom out.	Zoom out on the map.
Z and move pointer horizontally or Z+Mouse wheel	Change the z-value.	To increase the z-value, rotate the wheel backward or press Z while dragging the pointer to the right. To decrease the z-value, rotate the wheel forward or press Z while dragging the pointer to the left.
Shift+Z and move pointer horizontally or Shift+Mouse wheel	Accelerate change in z.	Press Shift while rotating the mouse wheel. Alternatively, to change the z-value 15 times faster, press Shift+Z while moving the pointer either left or right.
Caps Lock+Z and move pointer horizontally or Caps Lock+Mouse wheel	Decelerate change in z.	Press Caps Lock while rotating the mouse wheel. Alternatively, to change the z-value five times slower, press Caps Lock and then press Z while moving the pointer either left or right.
B	Turn surface snapping on or off.	Surface snapping provides on-demand positioning of the floating mark to the elevation surface at the current stereo pointer location. This provides the z-value at the stereo pointer position. This feature requires the images to have statistics calculated and pyramids built with either bilinear or cubic resampling.
T	Turn terrain following on or off.	Terrain following automatically keeps the stereo pointer on the elevation surface as you pan the stereo image pair. This feature is useful in navigating the stereo display. If you are using a very large image over a remote network connection, it is recommended that you do not use this feature, because there may be significant delays for the system to retrieve the correct information. It is also recommended that you do not use this feature in the fixed pointer mode, especially on images that have frequent and dramatic surface change, such as a DSM with dense buildings. This feature requires the images to have statistics calculated and pyramids built with either bilinear or cubic resampling.
F8	Switch between roaming pointer mode and fixed pointer mode.
~	Temporarily turn off fixed pointer mode.	This turns off the fixed pointer mode to allow you to perform other tasks. To return to the fixed pointer mode, press the ~ key again. Note: There is no need to press the Shift key. This shortcut applies to United States standard keyboards. Other types of keyboards may have a different character on the key. For detailed information, verify which key the VK_OEM_3 (Microsoft virtual key code) is mapped to for your keyboard.
Ctrl+Left arrow or Ctrl+Right arrow; or V and move pointer left or right.	Adjust the x-parallax.	The two images move toward or away from each other in the x (horizontal) direction.
Ctrl+Up arrow or Ctrl+Down arrow	Adjust the y-parallax.	The two images move toward or away from each other in the y (vertical) direction.
Ctrl+F7	Reset to the default parallax.
M	Activate Auto Load.	Turn on and off the automatic loading of the best stereo pair based on image metadata.
E	Pan to the center of the stereo pair.
Ctrl+Shift+M	Open the Modify Features pane.
Ctrl+Shift+C	Open the Create Features pane.
Ctrl+Shift+S	Open the Stereo Model Selector pane
O	Open the Overview window.
W	Open the Magnifier window.

For more information about navigating a stereo map, see Stereo map.

Georeferencing

Keyboard shortcuts for georeferencing

Keyboard shortcut	Action	Comment
C	Override the active tool with the Explore tool.
Q	Roam.	Move the pointer in the desired direction.
X and drag	Zoom out .
Z and drag	Zoom the view in or out .
L	Switch the visibility of the georeferencing layer on and off.
H	Switch the visibility of the control point ScreenTip on and off.
A	Specify the value for Move, Scale, or Rotate.
Esc	Cancel a control point while creating a control point pair.
Spacebar	Temporarily disable vector snapping (if snapping has been turned on).
F5	Refresh the control point table.

For more information about using georeferencing tools, see Georeferencing tools.

Ortho mapping (GCP Manager)

Keyboard shortcuts for the GCP Manager

Keyboard shortcut	Action
F5	Refresh the GCP list in GCP Manager.
Ctrl+D	Turn Dynamic Range Adjustment on and off.
Ctrl+G	Turn GCP display on and off.
Ctrl+F	Zoom to full extent.

For more information about ortho mapping, see Ortho mapping in ArcGIS Pro.

Full Motion Video player

Keyboard shortcuts for Full Motion Video

Keyboard shortcut	Action	Comment
Shift+E	Save video frames as images in a directory or in the project geodatabase.	This is the same as the Frames to Images video player tool.
P	Export the current video frame and map to a PowerPoint presentation.	This is the same as the Export to PowerPoint video player tool.
Shift+Z	Zoom the video pane to the map location of the video.	The view within the map display includes the video frame, as well as the ground track of the imaging platform. This is the same as the Zoom to Video video player tool.
F	Enable or disable Automatic Follow.	Continuously center the map display on the video frame and ground track of the sensor as it plays. The map display pans as the video reaches the edge of the display. This is the same as the Automatic Follow video player tool.
N	Display an arrow pointing north on the video of the active video pane.	This is the same as the North Arrow video player tool.
D	Display features from the map on the video pane.	This is the same as the Display Features video player tool.
I	Apply invert pixel color transformation on the active video pane.	This is the same as the Invert Colors video player tool.
Z	Zoom to video.	Zoom to the map location of the video. The view within the map display includes the video frame, as well as the ground track of the imaging platform.
V	Display VMTI.	Display VMTI Graphics on the video and map.
Shift +M	Metadata to Features.	Save platform, frame center, and frame outline metadata as a feature class to the project's geodatabase, unless you reconfigure it in the Configure Workspace settings.
M	Metadata to CSV.	Save platform, frame center, and frame outline metadata in a comma-separated values (CSV) file.
Shift +V	VMTI to Features.	Save VMTI centerpoint data to a geodatabase.
R	Record Video.	Interactively records a segment of video to a file on disk.
S	Export Segment.	Export a segment of the archived video. Set the start and end times using the markers on the timeline.
E	Export Frame.	Save the current video frame as an image.
C	Chip Frame.	Extract an image chip from a video frame and paste it into any application that supports standard clipboard operation.

For more information about the Full Motion Video player, see Full Motion Video player.

Pixel Editor

Keyboard shortcuts for the Pixel Editor

Keyboard shortcut	Action
L	Turn visibility of the operational layer on and off.
F5	Refresh Edits Log.

For more information about the Pixel Editor, see Pixel Editor in ArcGIS Pro.

Sharing

Keyboard shortcuts for sharing

Keyboard shortcut	Action	Comment
Ctrl+P	Open the Print pane.	This shortcut can be used for maps and layouts.
Ctrl+E	Open the Export pane.	This shortcut can be used for maps, layouts, and reports.

Tables

Keyboard shortcuts for working with tables

Keyboard shortcut	Action
Ctrl+T or Ctrl and double-click a layer or table name	Open the attribute table for the selected layer or stand-alone table from the Contents pane.
Ctrl+F4	Close the active table.
Ctrl+A or Shift and click upper left cell	Select all records.
Ctrl+Spacebar	Select or deselect the active row.
Ctrl+Enter	Move to the next record and select it exclusively. If more than one row is selected, the move occurs from the row with the active cell. This is particularly useful when working sequentially through a table, reviewing or editing each record, and looking at the feature it represents on the map.
Ctrl+U or Ctrl and click upper left cell	Switch the selection.
Shift+Down arrow or Shift+Up arrow	Continuously select records. Records are deselected if you switch arrow keys while pressing Shift.
Ctrl+Shift+A	Clear the selection.
Shift+Enter	Go to the previous row in the same column and select it.
Ctrl+Shift+Equal sign (=)	Zoom the view to the selected features.
Ctrl+8	Flash the active feature in the view.
Ctrl+N	Pan the view to the active feature and flash it.
Ctrl+Equal sign (=)	Zoom the view to the active feature and flash it.
Double-click the gray cell to the left of a record.	Zoom to and select the feature.
Ctrl and double-click the gray cell to the left of a record.	Pan to and select the feature.
Ctrl+P or Ctrl+I	Open the pop-up for the active feature.
Tab	Go to the next column. If at the end of a row, go to the first cell in the next row.
Shift+Tab	Go to the previous column. If at the end of a row, go to the last cell in the previous row.
Enter	Go to the next row in the same column.
Home or Ctrl+Left arrow	Go to the first cell in a row.
End or Ctrl+Right arrow	Go to the last cell in a row.
Ctrl+Home	Go to the first row, first cell.
Ctrl+End	Go to the last row, last cell.
Up arrow, Down arrow, Left arrow, Right arrow	Go in the direction of the arrow key.
Ctrl+Up arrow	Go to the first row in the same column.
Ctrl+Down arrow	Go to the last row in the same column.
Ctrl+Mouse wheel	Increase or decrease the scale of the table.
Ctrl+G	Open the Go to row number control.
Ctrl+0	Reset the scale of the table back to 100 percent.
Shift+Mouse wheel	Scroll the table window horizontally.
Ctrl+F	Display the Find and Replace commands.
Ctrl+Shift+U	Remove field sorting.
Ctrl+Shift+S	Open the Custom Sort dialog box.
Ctrl and double-click	Hide the field. This action works on a single field only. To hide multiple field columns in a table at once, press the Shift key while clicking to select multiple fields. Then, right-click a field name and click Hide Field. To show all fields again without opening the field's view, click the menu button at the top of the table view and click Show All Fields. Any hidden fields turn back on and become available in the table view and on other dialog boxes.
Ctrl and click	Select individual, separate fields.
Shift and click	Select all fields between the first and second click.
Ctrl+Shift+N	Switch between showing field names and aliases.

Editing tables

Keyboard shortcuts for editing and interacting with tables. When editing, a pencil icon appears in the first cell on the left of the row you're editing. The cell is also outlined in bold, dark green.

Keyboard shortcut	Action
Ctrl+C or Ctrl+Insert	Copy the value in a cell onto the clipboard.
Ctrl+Shift+C	Copy the selected records onto the clipboard.
Ctrl+V or Shift+Insert	Paste the contents of the clipboard into a cell or range of cells.
F2	Edit the contents of a cell.
Enter	Commit the current edit.
Esc	Cancel the edit in the cell and restore the original value.
Shift+Enter	Insert a new line or multiple lines while editing.
Ctrl+Enter	Open a hyperlink.

For more information about using these shortcut keys, see Keyboard shortcuts for working with tables.

Tasks

Keyboard shortcuts for tasks

Keyboard shortcut	Action
Alt+X	Run a step.
Alt+C	Continue to the next step.
Alt+S	Skip a step.

For more information about running tasks, see Open and run tasks.

Time

Keyboard shortcuts for the time slider

Keyboard shortcut	Action	Comment
Ctrl+Spacebar	Play or Pause.	Play through the entire sequence of time with the direction and speed defined in the time slider settings, or press the keyboard shortcut again to pause.
Ctrl+Shift+Right arrow	Step Forward.	Move forward in time by the step amount defined in the step settings on the Time tab.
Ctrl+Shift+Left arrow	Step Back.	Move backward in time by the step amount defined in the step settings on the Time tab.

For more information about using the time slider, see Visualize temporal data using the time slider.