Extend a route

Location Referencing ライセンスで利用可能です。

Extending a route involves adding length to the beginning or end of the route. As with other route editing activities, centerlines provide the location and geometry to extend a route. The centerline features you use to extend routes can be existing features in the centerline feature class, be digitized into the centerline feature class (using aerial photography, satellite imagery, or other basemaps for guidance), be copied and pasted from other feature classes, or be imported from CAD files or other ArcGIS-supported data sources. In addition to extending the route, the Extend Route tool can update the calibration points.

メモ:

• For an Engineering Stationing network, if the From Measure or To Measure values of the extended section of the route result in an equation point, the route will not be extended. Routes must be created using the Create Route tool.

  As shown in the examples below, in the first case, the route has measures that go from 0 feet to 10 feet. The geometrical length of the centerline used for extension is 10 feet. When you extend the route from the beginning, the measures for the extended section start at 0 feet and end at 10 feet.

  

  • If the Recalibrate route downstream option is checked, the original part of the route is recalibrated and the resulting extended route has measures from 0 feet to 20 feet.

    

    The recalibrate route downstream option was checked in the example above.

  • If the Recalibrate route downstream option is unchecked, the measures for the extended section that start at 0 feet and end at 10 feet result in an equation point, and the route will not be extended. Routes must be created using the Create Route tool.

  In the second case, for an Engineering Stationing network, the route has measures that go from 0 feet to 10 feet. The geometrical length of the centerline used for extension is 10 feet.

  

  When you extend the route from the end, the user selects the measures for the extended section to start at 5 feet and end at 15 feet. Therefore, the measures result in an equation point where the centerline and the original route meet. At this equation point, the back station is 10 feet and the ahead station is 5 feet. In that case, the route is not extended. Routes must be created using the Create Route tool.

• For an Engineering Stationing network, extending routes is only allowed at the beginning of the first route in the series or from the end of the last route in the series.
• Gap calibration rules are followed when editing routes.

1. Add the centerline and network feature class to a map.

   You can also open a map in which the centerline and network feature class are already present.

   メモ:

   The information model expects only one centerline at any given location. Make sure that the centerlines used for your edit do not overlap other centerlines in your LRS.

   メモ:

   Traditionally versioned networks must be edited through a direct connection to the geodatabase. Branch-versioned networks, including any network configured with a user-generated route ID, must be edited through a feature service.

2. Zoom in to the location where you want to extend the route.

   メモ:

   The centerline features for extending the route must exist in the centerline feature class prior to extending the route.

3. On the Location Referencing tab, in the Routes group, click Extend .

   

   The Extend Route pane appears with the Select By Rectangle option chosen by default.

   You can use multiple centerlines to extend a route.

4. Use your pointer to select one or more centerlines by rectangle at the location of the route you want to extend.

   You can also optionally click the Select one or more centerlines drop-down arrow to choose one of the remaining selection tools: Select By Polygon , Select By Lasso , Select By Circle , Select By Line , or Select By Trace .

   Alternatively, you can use the interactive selection tools found on the Map tab on the ArcGIS Pro ribbon.

   The selected centerlines are highlighted on the map and the Allow choosing of one or more centerlines button appears in the Extend Route pane. The count of Selected Centerlines is shown above the table.

   メモ:

   • The direction of digitization determines the direction of calibration, increasing in the direction of digitization. You can reverse direction for the chosen centerlines using the Flip the direction of the centerlines button .
   • If the centerlines do not touch the route at the extended location, click the Extension Location drop-down arrow and choose Begin or End.
   • You can keep the centerlines chosen after realigning the route. This option is particularly useful if you are realigning a route in the Engineering Stationing network and want to realign another route for the Continuous network using the same centerlines, or vice versa.
5. Click the Allow choosing of one or more centerlines button .

   A table appears in the Extend Route pane with each chosen centerline in a numbered row that corresponds to the selection order. Chosen centerlines are numbered on the map and highlighted. The count of Chosen Centerlines is shown below the table.

   

   メモ:

   The Recalibrate route downstream check box appears only in the case where the route is extended at the beginning. If this option is checked, the measures downstream of the extension is updated.

6. Optionally, change the centerline selection order table by choosing one or more table rows and using the buttons below the table to reorder the selection. You can also drag and drop rows to change their order.

   Changes in the table selection order are also shown on the map.

   Tools available in the centerlines table

   Tool	Tool name	Tool description
   	Allow choosing one or more centerlines	Chooses the selected centerlines in the map and displays them in a table by order of selection. Use the move buttons below the table or drag and drop rows to reorder the chosen centerlines.
   	Clear the currently chosen centerlines.	Clears the chosen centerlines and keeps the selected centerlines. You can reselect them after clicking this button or click the Allow choosing one or more centerlines button a second time.
   	Move chosen centerlines up	Moves one or more selected centerlines up a row in the table order.
   	Move chosen centerlines to the top	Moves one or more centerlines to the top of the table order.
   	Move chosen centerlines down	Moves one or more centerlines down a row in the table order.
   	Move chosen centerlines to the bottom	Moves one or more centerlines to the bottom of the table order.
   	Flip the direction of the centerlines	Reverses the direction of the chosen centerlines.
   	Remove the chosen centerlines	Removes the chosen centerline from the table order but leaves it selected.

   ヒント:

   To change the display field shown in the centerlines table, right-click the centerline feature class in the Contents pane and choose Properties from the context menu. In the Layer Properties dialog box, click the Display tab and click the Display field drop-down arrow to change its value. In the previous image, the display field is OBJECTID.

7. Choose the network in which the route extension will take place.

   メモ:

   To edit using feature services, the LRS Network must be published with the linear referencing and version management capabilities.

8. Click the Choose route from map button to choose a route to extend.
9. Click the Effective Date drop-down arrow to choose a date for the extension.
   • Alternatively, type the date in the Effective Date text box.
   • Double-click the empty Effective Date text box to populate today's date.
10. The From Measure value is automatically populated in the Extended Section.
    • If the route is being extended at the end, the suggested From Measure value is the same as the To Measure value of the original route.
    • If the route is being extended from the beginning, the suggested From Measure value is 0.
    • Alternatively, you can type a From Measure value.
    • If you do not know the start measure, allow Pipeline Referencing to suggest it. Click the Recalculate From Measure button to do so. This value is calculated as the difference between the To Measure value and the geometric length of the centerline.

メモ:

For the line network, the measures can be entered as station values in 00+00.00 or 00+00.000 format.

11. The To Measure value is automatically populated in the Extended Section.

    メモ:

    Z-values are considered when calculating the geometric length of the centerlines.

    • If the route is being extended at the end, the suggested To Measure value is the suggested From Measure value plus the geometric length of the centerline.
    • If the route is being extended from the beginning, the suggested To Measure value is the suggested From Measure value plus the geometric length of the centerline.
    • Alternatively, you can type a To Measure value of your choice.
    • If you do not know the end measure, allow Pipeline Referencing to suggest it. Click the Recalculate To Measure button to do so. This value is calculated as the sum of the From Measure value and the geometric length of the centerline.
12. Click Run.

    The route is extended. The original route is retired with its To Date populated with the Effective Date. A newly extended route is created with its From Date as the Effective Date, and the To Date set to <NULL>.

    メモ:

    If a message about acquiring locks or reconciling appears, conflict prevention is enabled.

Extend a route in a Utility Network dataset

After configuring a Utility Network for use with Pipeline Referencing using the Configure Utility Network Feature Class tool, use the steps above to extend routes in your dataset's pipeline layer.

The centerlines used to extend a route must have the following:

• The From Measure and To Measure values must be populated.
• The coincident points of the centerline features must have the same measures.

This concept is explained in the following examples:

In the following example, RouteX can be extended at the beginning using centerlines CL1 and CL2 since their from measures and to measures match. Calibration points are created at the end of each centerline when RouteX is extended.

In the following example, RouteX can’t be extended at the beginning using centerlines CL1 and CL2 because the from measures and to measures of CL2 and CL3 don’t match.

In the following example, RouteX can’t be extended at the beginning using centerlines CL1 and CL2. Even though the coincident points of the centerlines match, the order of their selection (CL2 followed by CL1) causes the extended portion of RouteX to be nonmonotonic.

In the following example, RouteX can’t be extended at the beginning using centerlines CL1 and CL2. Even though the coincident points of the centerlines match, the from measure and to measure of CL2 are the same (19) and cause the extended portion of RouteX to be nonmonotonic.

In the following example, RouteX can’t be extended at the beginning using centerlines CL1 and CL2. Even though the coincident points of the centerlines match, the direction of CL2 is the opposite direction to that of the route.

In the following example, RouteX can’t be extended at the beginning using centerlines CL1 and CL2 because they don’t have from measures and to measures.