Manage preferences

Aviation Charting ライセンスで利用できます。

You can set preferences that dictate how ArcGIS Aviation Charting geoprocessing tools create airspace lines, generate airspace areas, process routes, generate chart leads, and perform change detection in ArcGIS Pro using the Aviation Preferences tool. The preferences you configure with this tool are stored in a preferences table located in the Aviation Charting Aeronautical Information System (AIS) geodatabase schema that is provided in the Aviation Charting product data files at My Esri.

Learn more about the AIS geodatabase schema

Preferences table

A preferences table is a stand-alone table included in the Aviation Charting AIS geodatabase schema:

Field nameData type
Name

Text (max length 255 characters)

Description

(Required)

Text (max length 255 characters)

JSON

(Required)

Text (max length 20,000 characters)

Type

Text (max length 255 characters)

注意:

If your geodatabase schema does not contain a preferences table, you can manually create one. The new table must contain the fields listed above along with the correct data type and text length for your table to populate correctly. Your new table must also be named Preferences.

Open the Aviation Preferences view

You can populate a preferences table using the Aviation Preferences tool in ArcGIS Pro.

  1. Start ArcGIS Pro.
  2. Open or create a project containing an Aviation Charting AIS geodatabase.
  3. If your project contains a map with feature classes from your Aviation Charting AIS geodatabase, skip to step 8.
  4. If the Catalog pane is not open, click the View tab, and click Catalog Pane.
  5. Expand the Databases drop-down arrow in the Catalog pane.
  6. Expand your Aviation Charting AIS geodatabase.
  7. Right-click the feature class you want to add, and click Add To Current Map.

    The feature class you chose appears as a layer in the Contents pane, and the Aviation tab appears on the ribbon.

  8. Click the Aviation tab.
    注意:

    Before the Aviation tab appears on the ribbon, you must add a feature class from your Aviation Charting AIS geodatabase to the map.

  9. In the Configuration group, click Preferences.

    The Preferences tab and the Aviation Preferences view appear.

Add preferences

The Preferences tab allows you to populate your geodatabase's preferences table with preferences for the Process ATS Routes, Generate Airspace Lines,Generate Airspace Areas, Generate Aviation Chart Leads, and Report Aviation Chart Changes tools.

  1. In the Aviation Preferences view, choose the preference you want to add in the Add Preferences group on the ribbon.
    • Process ATS Routes—Determines how the Process ATS Routes tool identifies and processes route features.
    • Generate Airspace Lines—Determines how the Generate Airspace Lines tool generates airspace lines from input airspace boundary features.
    • Generate Airspace Areas—Determines how the Generate Airspace Areas tool generates airspace areas from input airspace features.
    • Generate Chart Leads—Determines how the Generate Aviation Chart Leads tool generates Chart Leads from the input map frame.
    • Summary Table— Determines how the Generate Summary Table Data tool gathers information from related tables and generates a single user-defined table.
    • Report Chart Changes—Determines how the Report Aviation Chart Changes tool identifies data changes between two エンタープライズ ジオデータベース versions.

    A new record appears.

    注意:

    The red box next to the new record indicates that the record is invalid and cannot be used to populate a preferences table. A record is considered invalid if the preference is a duplicate value or if the preference contains incomplete information.

  2. Click the new record.
  3. Locate the Preference Details pane and expand the General Info section.
  4. In the Name text box, type a unique name that defines the preference you are creating.
    注意:

    You cannot have multiple preferences of the same type with the same name. For example, it is valid to have two separate preferences called Airspace Route for the Process ATS Routes and Generate Airspace Lines tools. It is not valid, however, to have two preferences called Airspace Routes for the Generate Airspace Lines tool.

  5. In the Description text box, type a unique description for the preference.
  6. In the Tags text box, type descriptive tags for the preference.
  7. Continue configuring the preference you chose with one of the following sections:

Configure preferences for the Process ATS Routes tool

The following steps allow you to configure preferences for the Process ATS Routes tool in a preferences table. These preferences determine how the Process ATS Routes tool runs on your features.

  1. Expand the Define Overlaps group in Preference Details.
  2. Click the ATSRoutes Fields drop-down arrow and check the check boxes next to the fields you want to use to define overlapping features.
    注意:

    Only features with identical values in the chosen fields are considered overlapping.

  3. Click the ATSRoutes_C Fields drop-down arrow and check the check boxes next to the fields you want to use to define overlapping features.
    • Hide Overlapping Routes—Overlapping route features are hidden.
    • Concatenate Idents—Overlapping route features' identifier values are concatenated with a hyphen.
    • Offset Overlapping Routes—Overlapping features appear offset from one another.
      注意:

      If you checked this check box, you must provide an Offset Value, which determines how far apart the features appear on a chart.

  4. Locate the new record in the Aviation Preferences view and ensure that the record is complete and that it is not a duplicate.

    As you fill in details in the Preference Details pane, the record populates with information automatically. Ensure that the colored box next to the record is green. If it is still red, the record is invalid and cannot be used to populate the preference table.

    注意:

    You can undo a change to your preferences by right-clicking the record and clicking Undo Changes. You cannot undo changes after you save your preferences to the preferences table.

  5. On the Preferences tab and in the Preferences group, click Save.

    Your changes have been committed, and the preference table in your Aviation Charting AIS geodatabase has been populated.

Configure preferences for the Generate Airspace Lines tool

The following steps allow you to configure preferences for the Generate Airspace Lines tool in a preferences table. These preferences determine how the Generate Airspace Lines tool runs on your features.

  1. In the General Info section, build a query to select features associated with this preference under Filter.
  2. Expand the Airspace types to process group.
  3. Click the Types drop-down arrow and check the check boxes next to the airspace classifications you want to process with the Generate Airspace Lines tool.
  4. Expand the Airspace labels to process section.
  5. Click the Labels drop-down arrow and check the check boxes next to the labels you want to process with the Generate Airspace Lines tool.
  6. Optionally, set a Cluster Tolerance value and measurement unit, which defines how close vertices should be to one another to be considered coincident.
  7. Locate the new record in the Aviation Preferences view and ensure that the record is complete and that it is not a duplicate.

    As you fill in details in the Preference Details pane, the record populates with information automatically. Ensure that the colored box next to the record is green. If it is still red, the record is invalid and cannot be used to populate the preference table.

    注意:

    You can undo a change to your preferences by right-clicking the record and clicking Undo Changes. You cannot undo changes after you save your preferences to the preferences table.

  8. On the Preferences tab and in the Preferences group, click Save.

    Your changes have been committed, and the preference table in your Aviation Charting AIS geodatabase has been populated.

Configure preferences for the Generate Airspace Areas tool

The following steps allow you to configure preferences for the Generate Airspace Areas tool in a preferences table. These preferences determine how the Generate Airspace Areas tool runs on your features.

  1. In the General Info section, build a query to select features associated with this preference under Filter.
  2. Expand the Airspace types to process group.
  3. Click the Types drop-down arrow and check the check boxes next to the airspace classifications you want to process with the Generate Airspace Areas tool.
  4. Enter the following values in the Flight level pane:
    • Units—The unit of measurement for your preference.
    • High limit—The ceiling of your airspace.
    • Low limit—The floor of your airspace.
    • Use Overrides—The high limit or low limit value can be overridden by an input vertical limit override table.
  5. Locate the new record in the Aviation Preferences view and ensure that the record is complete and that it is not a duplicate.

    As you fill in details in the Preference Details pane, the record populates with information automatically. Ensure that the colored box next to the record is green. If it is still red, the record is invalid and cannot be used to populate the preference table.

    注意:

    You can undo a change to your preferences by right-clicking the record and clicking Undo Changes. You cannot undo changes after you save your preferences to the preferences table.

  6. On the Preferences tab and in the Preferences group, click Save.

    Your changes have been committed, and the preference table in your Aviation Charting AIS geodatabase has been populated.

Configure preferences for the Generate Chart Leads tool

The following steps allow you to configure preferences for the Generate Chart Leads tool in a preferences table. These preferences determine how the Generate Aviation Chart Leads tool runs on your features.

  1. Click the Source drop-down arrow in Chart Leads Details section and choose the line feature classes from your current workspace or database.
  2. Click the From Field drop-down arrow and choose an option for the From field in the line feature classes.
    注意:

    Alternatively, click the Expression button 式の設定 to set a custom expression.

  3. Click the To Field drop-down arrow and choose an option for the To field in the line feature classes.
    注意:

    Alternatively, click the Expression button 式の設定 to set a custom expression.

  4. In the Appearance section, set the appearance for the chart leads.

    The defaults are the following:

    • Font Size—10
    • Offset—0.1
    • Font Family—Tahoma
    • Font Style—Bold
    • Font Color—Black

  5. Optionally, you can flip chart leads in the Flip Chart Leads by checking the appropriate check box:
    • Top
    • Bottom
    • Left
    • Right
  6. Locate the new record in the Aviation Preferences view and ensure that the record is complete and that it is not a duplicate.

    As you fill in details in the Preference Details pane, the record populates with information automatically. Ensure that the colored box next to the record is green. If it is still red, the record is invalid and cannot be used to populate the preference table.

    注意:

    You can undo a change to your preferences by right-clicking the record and clicking Undo Changes. You cannot undo changes after you save your preferences to the preferences table.

  7. On the Preferences tab and in the Preferences group, click Save.

    Your changes have been committed, and the preference table in your Aviation Charting AIS geodatabase has been populated.

Once you have run the Generate Aviation Chart Leads tool and generated the text graphics, you can edit them further in the label properties.

Configure preferences for the Summary Table tool

The following steps allow you to configure Summary Table preferences in a preferences table. Summary Table preferences determine how the Generate Summary Table Data tool runs on your features.

  1. Click the Source Table drop-down arrow and choose a table you want to use as the primary source.
  2. Click the Target Table drop-down arrow and choose a table you want to have populated by the Generate Summary Table Data geoprocessing tool.
  3. Click the Tables drop-down arrow and check the check boxes next to additional related tables.
  4. On the Preferences tab and in the Preferences group, click Save.

    Your changes have been committed, and the preference table in your Aviation Charting AIS geodatabase has been populated.

Complete the following to finish setting up your preferences and to build a query to select features associated with this preference:

Learn more about building queries in ArcGIS Pro

  1. Click the Add 追加 button below the Field Mapping section to designate source, and target attributes.
  2. Click the Add 追加 button below the Key Field(s) section to designate key fields.
  3. Optionally, check, the Has Panels check box.
  4. On the Preferences tab and in the Preferences group, click Save.

    Your changes have been committed, and the preference table in your Aviation Charting AIS geodatabase has been populated.

Configure preferences for the Report Aviation Chart Changes tool

The following steps allow you to configure Report Chart Changes preferences in a preferences table. Report Chart Changes preferences determine how the Report Aviation Chart Changes tool runs on your features.

  1. Click the Tables drop-down arrow and check the check boxes next to the features to include in your report.
  2. Choose the feature name from the box below the Tables drop-down menu.
  3. In the Fields table, check the check boxes next to the fields to include in your report.
    注意:

    The Fields table only shows fields for the feature you selected in step 2.

    ヒント:

    You can click Select All to select all fields in the Fields table. You can click Clear All to unselect all fields in the Fields table.

    The fields you selected to be included in your report are grouped in the Fields table under the Selected section. Fields that are not selected are grouped in the Unselected section.

  4. Repeat steps 2 through 3 for each table you chose.
  5. Locate the new record in the Aviation Preferences view and ensure that the record is complete and that it is not a duplicate.

    As you fill in details in the Preference Details pane, the record populates with information automatically. Ensure that the colored box next to the record is green. If it is still red, the record is invalid and cannot be used to populate the preference table.

    注意:

    You can undo a change to your preferences by right-clicking the record and clicking Undo Changes. You cannot undo changes after you save your preferences to the preferences table.

  6. On the Preferences tab and in the Preferences group, click Save.

    Your changes have been committed, and the preference table in your Aviation Charting AIS geodatabase has been populated.

Delete records

You can delete unwanted records in the Aviation Preferences view.

  1. Right-click the record you want to delete and click Delete.
    ヒント:

    You can choose multiple records at once by pressing the Ctrl key and clicking the records you want to delete.

    ヒント:

    Optionally, you can delete selected records by pressing the Delete key.

    A strike-through mark appears over the selected records.

  2. On the Preferences tab and in the Preferences group, click Save.

    Your changes have been committed, and the preference table in your Aviation Charting AIS geodatabase has been populated.