Event behavior for route realignment

适用于 Location Referencing 许可。

When a route realignment occurs, events are impacted in the edit activity area, as well as upstream and downstream of the realignment, depending on the configured event behavior for each event layer. Pipeline Referencing has options to retire a realigned route, or to reassign the realigned portion of the route to an abandoned route with a new route name and route ID.

注:

Events are not updated until the Apply Event Behaviors geoprocessing tool is applied after route edits. If you are using conflict prevention, you are prompted to run Apply Event Behaviors, which must be done before posting can be completed.

The following sections detail the results of executing this tool on event features.

Realignment scenario

This realignment scenario involves one route and three events. The realignment (depicted with a gray line) starts in Event1, completely spans Event2, and ends in Event3.

Before realignment

Stay Put behavior

The geographic location of the event outside the realign region is maintained; the measures may change. The event may also split if it crosses the realign region. Portions of events in the realign region are retired.

Stay Put event behavior

Move behavior

The measures of the event are maintained; the geographic location may change.

Move event behavior

Retire behavior

Events intersecting the realignment region are retired.

Retire event behavior

Detailed behavior results

Event behaviors for route realignment are discussed in the following sections.

The following scenario involves one route and three events. The realignment (depicted with a gray line) starts in Event1, completely spans Event2, and ends in Event3. The resulting behaviors, time slices, and measures are detailed in the following sections.

Before realignment

EventRoute nameFrom dateTo dateFrom measureTo measure

Event1

Route1

1/1/2000

<null>

0

8

Event2

Route1

1/1/2000

<null>

8

12

Event3

Route1

1/1/2000

<null>

12

20

Stay Put behavior

If the realignment is set to occur on 1/1/2005, with realigned route values of 6 to 18 and Recalibrate route downstream chosen, this has the following effects:

  • Event1 is represented by two time slices. There is a time slice from 1/1/2000 to 1/1/2005, with the original measures of 0 to 8. The second time slice is from 1/1/2005 to <null>, with measures of 0 to 6 that stay the same geographically but have the new measures of Route1.
  • Event2 retires to maintain geographic location.
  • Event3 is represented by two time slices. There is a time slice from 1/1/2000 to 1/1/2005, with the original measures of 12 to 20. The second time slice is from 1/1/2005 to <null>, with measures of 18 to 24 that stay the same geographically but have the new measures of Route1.

Stay Put event behavior

EventRoute nameFrom dateTo dateFrom measureTo measureLocation error

Event1

Route1

1/1/2000

1/1/2005

0

8

No error

Event1

Route1

1/1/2005

<null>

0

6

No error

Event2

Route1

1/1/2000

1/1/2005

8

12

No error

Event3

Route1

1/1/2000

1/1/2005

12

20

No error

Event3

Route1

1/1/2005

<null>

18

24

No error

Move behavior

If the realignment is set to occur on 1/1/2005, with realigned route values of 6 to 18 and Recalibrate route downstream chosen, this has the following effects:

  • Event1 is represented by two time slices. There is a time slice from 1/1/2000 to 1/1/2005, with the original measures of 0 to 8. The second time slice is from 1/1/2005 to <null> with measures of 0 to 8 that move geographically to maintain the original event measures. The event has the same measures but different geometry in the new time slice.
  • Event2 is represented by two time slices. There is a time slice from 1/1/2000 to 1/1/2005, with the original measures of 8 to 12. The second time slice is from 1/1/2005 to <null>, with measures of 8 to 12 that move geographically to maintain the original event measures. The event has the same measures but different geometry in the new time slice.
  • Event3 is represented by two time slices. There is a time slice from 1/1/2000 to 1/1/2005, with the original measures of 12 to 20. The second time slice is from 1/1/2005 to <null>, with measures of 12 to 20 that move geographically to maintain the original event measures. The event has the same measures but different geometry in the new time slice.

Move event behavior

EventRoute nameFrom dateTo dateFrom measureTo measureLocation error

Event1

Route1

1/1/2000

1/1/2005

0

8

No Error

Event1

Route1

1/1/2005

<null>

0

8

No Error

Event2

Route1

1/1/2000

1/1/2005

8

12

No Error

Event2

Route1

1/1/2005

<null>

8

12

No Error

Event3

Route1

1/1/2000

1/1/2005

12

20

No Error

Event3

Route1

1/1/2005

<null>

12

20

No Error

Retire behavior

If the realignment is set to occur on 1/1/2005, with realigned route values of 6 to 18 and Recalibrate route downstream chosen, this has the following effects:

  • Event1 retires.
  • Event2 retires.
  • Event3 retires.

Retire event behavior

EventRoute nameFrom dateTo dateFrom measureTo measureLocation error

Event1

Route1

1/1/2000

1/1/2005

0

8

No error

Event2

Route1

1/1/2000

1/1/2005

8

12

No error

Event3

Route1

1/1/2000

1/1/2005

12

20

No error

Realign with abandonment scenario (reassign to abandoned route)

The route section in the realign region is reassigned to a new route on a new line, and any event in the realign region follows the reassign event behavior. Stay Put, Move, and Retire reassign event behavior settings result in the same behavior as the previous diagrams show. If you want your events to transfer to the abandoned route, you should configure the Snap behavior for reassign route.

注:

The reassign event behavior is applied before the realign event behavior, so it is important to verify the event feature class reassign event behavior configuration when using the Reassign to abandoned route functionality.

Before realignment with abandonment scenario

Stay Put behavior (with reassign set to Snap behavior)

The geographic location of the event outside the realign region is maintained; the measures may change. The event may also split if it crosses the realign region. Portions of the event in the realign region are snapped to the reassigned route.

Stay Put event behavior with Snap behavior

Move behavior (with reassign set to Snap behavior)

The measures of the event are maintained; the geographic location may change. Portions of the event in the realign region are snapped to the reassigned route.

Move event behavior with reassign set to Snap behavior

Retire behavior (with reassign set to Snap behavior)

Events intersecting the realignment region are retired. Portions of the event in the realign region are snapped to the reassigned route.

The following table gives more information to understand how events are impacted by a realignment:

BehaviorEvents upstream realignmentEvents intersecting realignmentEvents downstream realignment

Stay Put

Up to closest upstream calibration point; one or more measures adjusted to retain x, y if needed.

Retire event; line events crossing the edit section are split and the original event retired.

If route calibration is changed, the recalibrate event behavior is applied. Otherwise, no action.

Move

Shape regenerated, if needed, to new location of route measures.

Shape regenerated to new location of route measures.

If route calibration is changed, the recalibrate event behavior is applied. Otherwise, no action.

Retire

Up to closest upstream calibration point; retire event if needed.

Retire event; line events crossing the edit section are not split.

If route calibration is changed, the recalibrate event behavior is applied. Otherwise, no action.

注:
  • Point events follow the same behavior as linear events, but don't need to be split.
  • If the option to Recalibrate route downstream is chosen, the events downstream of the edited portion of the route will have calibrate route event behaviors applied.
  • The following diagram shows the upstream and downstream section for the edit.
    Upstream and Downstream
  • The network may contain events that span multiple routes in a line network. In that case, the behaviors are still applied in the same manner.
  • When the LRS is time aware, edit activities such as realigning a route will time slice routes and events.

Detailed behavior results with realigned abandonment

The following sections detail how event behavior rules are enforced when a route is realigned with abandonment.

Before realignment with abandonment

The following scenario involves one route and three events. The realignment (depicted with a gray line) starts in Event1, completely spans Event2, and ends in Event3. The resulting behaviors, time slices, and measures with abandonment are detailed in the following sections.

Before realignment with abandonment

EventRoute NameFrom DateTo DateFrom MeasureTo Measure

Event1

Route1

1/1/2000

<null>

0

8

Event2

Route1

1/1/2000

<null>

8

12

Event3

Route1

1/1/2000

<null>

12

20

Stay Put behavior (with reassign set to Snap behavior)

If the realignment is set to occur on 1/1/2005 with realigned route values of 6 to 18, and both Recalibrate route downstream and Reassign to abandoned route(s) are chosen, it has the following effects:

  • Event1 is represented by three time slices. There is a time slice from 1/1/2000 to 1/1/2005, with the original measures of 0 to 8, and a time slice from 1/1/2005 to <null> with measures of 0 to 6 that stay in the same location geographically but have the new measures of Route1. There is also a time slice from 1/1/2005 to <null> located on Route1_Ab, which is on a new line, Line1_Ab, with measures of 6 to 8 that has snapped to the abandoned route.
  • Event2 is represented by two time slices. There is a time slice from 1/1/2000 to 1/1/2005, with the original measures of 8 to 12, and a time slice from 1/1/2005 to <null> located on Route1_Ab, which is on a new line, Line1_Ab, with measures of 8 to 12 that has snapped to the abandoned route.
  • Event3 is represented by three time slices. There is a time slice from 1/1/2000 to 1/1/2005, with the original measures of 12 to 20, and a time slice from 1/1/2005 to <null>, with measures of 18 to 24 that stay in the same location geographically but have the new measures of Route1. There is also a time slice from 1/1/2005 to <null> located on Route1_Ab, which is on a new line, Line1_Ab, with measures of 12 to 14 that has snapped to the abandoned route.

Stay Put event behavior with reassign set to Snap behavior

EventRoute NameFrom DateTo DateFrom MeasureTo MeasureLocation Error

Event1

Route1

1/1/2000

1/1/2005

0

8

No Error

Event1

Route1

1/1/2005

<null>

0

6

No Error

Event1

Route1_Ab

1/1/2005

<null>

6

8

No Error

Event2

Route1

1/1/2000

1/1/2005

8

12

No Error

Event2

Route1_Ab

1/1/2005

<null>

8

12

No Error

Event3

Route1

1/1/2000

1/1/2005

12

20

No Error

Event3

Route1

1/1/2005

<null>

18

24

No Error

Event3

Route1_Ab

1/1/2005

<null>

12

14

No Error

Move behavior (with reassign set to Snap behavior)

If the realignment is set to occur on 1/1/2005 with realigned route values of 6 to 18, and both Recalibrate route downstream and Reassign to abandoned route(s) are selected, it has the following effects:

  • Event1 is represented by three time slices. There is a time slice from 1/1/2000 to 1/1/2005, with the original measures of 0 to 8, and a time slice from 1/1/2005 to <null> with measures of 0 to 6 that move geographically to maintain the original event measures. The event has the same measures but different geometry in the new time slice. There is also a time slice from 1/1/2005 to <null> located on Route1_Ab, with measures of 6 to 8 that has snapped to the abandoned route.
  • Event2 is represented by two time slices. There is a time slice from 1/1/2000 to 1/1/2005, with the original measures of 8 to 12, and a time slice from 1/1/2005 to <null> located on Route1_Ab with measures of 8 to 12 that has snapped to the abandoned route.
  • Event3 is represented by three time slices. There is a time slice from 1/1/2000 to 1/1/2005, with the original measures of 12 to 20, and a time slice from 1/1/2005 to <null>, with measures of 14 to 20 that move geographically to maintain the original event measures. The event has the same measures but different geometry in the new time slice. There is also a time slice from 1/1/2005 to <null>, located on Route1_Ab, with measures of 12 to 14 that has snapped to the abandoned route.

Move event behavior with reassign set to Snap behavior

EventRoute NameFrom DateTo DateFrom MeasureTo MeasureLocation Error

Event1

Route1

1/1/2000

1/1/2005

0

8

No Error

Event1

Route1

1/1/2005

<null>

0

8

Partial match for To Measure

Event1

Route1_Ab

1/1/2005

<null>

6

8

No Error

Event2

Route1

1/1/2000

1/1/2005

8

12

No Error

Event2

Route1_Ab

1/1/2005

<null>

8

12

No Error

Event3

Route1

1/1/2000

1/1/2005

12

20

No Error

Event3

Route1

1/1/2005

<null>

14

20

No Error

Event3

Route1_Ab

1/1/2005

<null>

12

14

No Error

Retire behavior (with reassign set to Snap behavior)

If the realignment is set to occur on 1/1/2005 with realigned route values of 6 to 18, and both Recalibrate route downstream and Reassign to abandoned route(s) are selected, it has the following effects:

  • Event1 is represented by three time slices. There is a time slice from 1/1/2000 to 1/1/2005, with measures of 0 to 8, and a time slice from 1/1/2005 to <null> with measures of 0 to 6. This time slice is created because the reassign edit behavior is processed prior to the realign edit behavior, causing the upstream linear event that crossed the realign region to split and time slice rather than retire. There is also a time slice from 1/1/2005 to <null>, located on Route1_Ab, with measures of 6 to 8 that has snapped to the abandoned route.
  • Event2 is represented by two time slices. There is a time slice from 1/1/2000 to 1/1/2005, with measures of 8 to 12. There is also a time slice from 1/1/2005 to <null>, located on Route1_Ab, with measures of 8 to 12 that has snapped to the abandoned route.
  • Event3 is represented by two time slices. There is a time slice from 1/1/2000 to 1/1/2005, with measures of 12 to 20. There is also a time slice from 1/1/2005 to <null>, located on Route1_Ab, with measures of 12 to 14 that has snapped to the abandoned route.

Retire event behavior with reassign set to Snap behavior

EventRoute NameFrom DateTo DateFrom MeasureTo MeasureLocation Error

Event1

Route1

1/1/2000

<null>

0

8

No Error

Event1

Route1_Ab

1/1/2005

<null>

6

8

No Error

Event2

Route1

1/1/2000

1/1/2005

8

12

No Error

Event2

Route1_Ab

1/1/2005

<null>

8

12

No Error

Event3

Route1

1/1/2000

1/1/2005

12

20

No Error

Event3

Route1_Ab

1/1/2005

<null>

12

14

No Error

Detailed behavior on routes in a line network with events that span routes

The following sections detail how event behavior rules are enforced when a route on a line in a line network is realigned.

Stay Put behavior (with Reassign set to Snap for abandonment)

If the realignment with abandonment is set to occur on 1/1/2005, from measure 17 on Route2 to measure 43 on Route 4 and Recalibrate route downstream is unchecked, this has the following effects:

  • For the abandoned portions of Route2, Route3, and Route4, the following routes are created: Route2_Ab, Route3_Ab, Route4_Ab.
  • Event1 is represented by two time slices. There is a time slice from 1/1/2000 to 1/1/2005, with the original measures of 0 on Route1 to 30 on Route3. The second time slice is from 1/1/2005 to <null> with two different records. Because the realignment with abandonment took place in the middle of the event, it will split with one record having measures of 0 on Route1 to 17 on Route2 and the second record having measures of 17 on Route2_Ab to 30 on Route3_Ab. Both events stay in the same location geographically.
  • Event2 is represented by two time slices. There is a time slice from 1/1/2000 to 1/1/2005, with the original measures of 30 on Route3 to 48 on Route4. The second time slice is from 1/1/2005 to <null> with two different records. Because the realignment with abandonment took place in the middle of the event, it will split, one record having measures 30 on Route3_Ab to measure 43 on Route4_Ab and the second record having measures of 43 on Route4 to 48 on Route 4. Both events stay in the same location geographically.

Before Stay Put behavior

The following diagram and table provide details about the routes, measures, and events before realignment.

Before Stay Put event behavior

Event IDFrom DateTo DateFrom RouteIDTo Route IDFrom MeasureTo Measure

Event1

1/1/2000

<null>

Route1

Route3

0

30

Event2

1/1/2000

<null>

Route3

Route4

30

48

After Stay Put behavior (with Reassign set to Snap for abandonment)

For the abandoned portions of Route2, Route3, and Route4, the following routes are created: Route2_Ab, Route3_Ab, Route4_Ab.

After Stay Put event behavior

Event IDFrom DateTo DateFrom RouteIDTo Route IDFrom MeasureTo MeasureLocation Error

Event1

1/1/2000

1/1/2005

Route1

Route3

0

30

No Error

Event1

1/1/2005

<null>

Route1

Route2

0

17

No Error

Event1

1/1/2005

<null>

Route2AB

Route3_Ab

17

30

No Error

Event2

1/1/2000

1/1/2005

Route3

Route4

30

48

No Error

Event2

1/1/2005

<null>

Route3_Ab

Route4_Ab

30

43

No Error

Event2

1/1/2005

<null>

Route4

Route4

43

48

No Error

Move behavior (with Reassign set to Move for abandonment)

  • If the realignment with abandonment is set to occur on 1/1/2005, from measure 17 on Route2 to measure 43 on Route 4 and Recalibrate route downstream is unchecked, this has the following effects:
    • Event1 is represented by two time slices. There is a time slice from 1/1/2000 to 1/1/2005, with the original measures of 0 on Route1 to 30 on Route3. The second time slice is from 1/1/2005 to <null> with measures of 0 on Route1 to 30 on Route3, but it will only partially locate because part of Route2 and all of Route3 have been retired. The event has the same measures but different geometry in the new time slice.
    • Event2 is represented by two time slices. There is a time slice from 1/1/2000 to 1/1/2005, with the original measures of 30 on Route3 to 48 on Route4. The second time slice from 1/1/2005 to <null>, has measures of 30 on Route3 to 48 on Route4, but it will only partially locate because all of Route3 and part of Route4 have retired. The event has the same measures but different geometry in the new time slice.

Before Move behavior

The following diagram and table provide details about the routes, measures, and events before realignment.

Before Move event behavior

Event IDFrom DateTo DateFrom RouteIDTo Route IDFrom MeasureTo Measure

Event1

1/1/2000

<null>

Route1

Route3

0

30

Event2

1/1/2000

<null>

Route3

Route4

30

48

After Move behavior (with Reassign set to Move for abandonment)

For the abandoned portions of Route2, Route3, and Route4, the following routes are created: Route2_Ab, Route3_Ab, Route4_Ab.

After Move event behavior

Event IDFrom DateTo DateFrom RouteIDTo Route IDFrom MeasureTo MeasureLocation Error

Event1

1/1/2000

1/1/2005

Route1

Route3

0

30

No Error

Event1

1/1/2005

<null>

Route1

Route3

0

30

Partial Match for the To Measure

Event2

1/1/2000

/1/2005

Route3

Route4

30

48

No Error

Event2

/1/2005

<null>

Route3

Route4

30

48

Partial Match for the From Measure

Retire behavior (with Reassign set to Retire for abandonment)

  • If the realignment with abandonment is set to occur on 1/1/2005, from measure 17 on Route2 to measure 43 on Route 4 and Recalibrate route downstream is unchecked, this has the following effects:
    • Event1 will retire since it is located within the realigned or abandoned region.
    • Event2 will retire since it is located within the realigned or abandoned region.

Before retire behavior

The following diagram and table provide details about the routes, measures, and events before realignment.

Before Retire event behavior

Event IDFrom DateTo DateFrom RouteIDTo Route IDFrom MeasureTo Measure

Event1

1/1/2000

<null>

Route1

Route3

0

30

Event2

1/1/2000

<null>

Route3

Route4

30

48

After retire behavior (with Reassign set to Retire)

For the abandoned portions of Route2, Route3, and Route4, the following routes are created: Route2_Ab, Route3_Ab, Route4_Ab.

After Retire event behavior

The events on LineA are retired.

Event IDFrom DateTo DateFrom RouteIDTo Route IDFrom MeasureTo Measure

Event1

1/1/2000

1/1/2005

Route1

Route3

0

30

Event2

1/1/2000

1/1/2005

Route3

Route4

30

48