Multipoint

Zusammenfassung

A Multipoint object is an ordered collection of points.

Diskussion

Bei vielen Workflows der Geoverarbeitung möchten Sie eventuell bestimmte Vorgänge mit Koordinaten- und Geometriedaten ausführen, jedoch nicht unbedingt eine neue (temporäre) Feature-Class erstellen, diese mit Cursorn füllen, die Feature-Class verwenden und dann die vorläufige Feature-Class wieder löschen. Sie können anstelle von Eingabe und Ausgabe auch Geometrieobjekte verwenden und so die Geoverarbeitung vereinfachen. Geometrieobjekte können von Grund auf neu mit Geometry-, Multipoint-, PointGeometry-, Polygon- oder Polyline-Classes erstellt werden.

During the creation of a geometry object, a simplification process is performed to make the geometry topologically consistent according to its geometry type. For instance, it rectifies polygons that may be self-intersecting, or contain incorrect ring orientations. Coordinates may move within the resolution of the geometry's spatial reference.

The following numeric operators can be used in place of geometry methods:

Geometry methodNumeric operator

intersect

+

union

|

difference

-

symmetricDifference

^

For example, to union two geometry objects, g3 = g1 | g2 is equivalent to g3 = g1.union(g2).

The + operator will use the geometry type (dimension) of the first geometry to determine the geometry type of the output.

Syntax

 Multipoint (inputs, {spatial_reference}, {has_z}, {has_m})
ParameterErläuterungDatentyp
inputs

The coordinates used to create the object. The data type can be either Point or Array objects.

Object
spatial_reference

The spatial reference of the new geometry.

(Der Standardwert ist None)

SpatialReference
has_z

The Z state: True for geometry if Z is enabled and False if it is not.

(Der Standardwert ist False)

Boolean
has_m

The M state: True for geometry if M is enabled and False if it is not.

(Der Standardwert ist False)

Boolean

Eigenschaften

EigenschaftErläuterungDatentyp
JSON
(Schreibgeschützt)

Returns an Esri JSON representation of the geometry as a string.

Tipp:

The returned string can be converted to a dictionary using the json module's loads function.

String
WKB
(Schreibgeschützt)

Returns the well-known binary (WKB) representation for OGC geometry. It provides a portable representation of a geometry value as a contiguous stream of bytes.

Bytearray
WKT
(Schreibgeschützt)

Returns the well-known text (WKT) representation for OGC geometry. It provides a portable representation of a geometry value as a text string.

Any true curves in the geometry will be densified into approximate curves in the WKT string.

String
area
(Schreibgeschützt)

The area of a polygon feature. It is zero for all other feature types.

Double
centroid
(Schreibgeschützt)

The true centroid if it is within or on the feature; otherwise, the label point is returned.

Point
extent
(Lesen und schreiben)

The extent of the geometry.

Extent
firstPoint
(Schreibgeschützt)

The first coordinate point of the geometry.

Point
hasCurves
(Schreibgeschützt)

Returns True if the geometry has a curve.

Boolean
hullRectangle
(Schreibgeschützt)

A space-delimited string of the coordinate pairs of the convex hull rectangle.

String
isMultipart
(Schreibgeschützt)

Returns True if the number of parts for this geometry is more than one.

Boolean
labelPoint
(Schreibgeschützt)

The point at which the label is located. The labelPoint is always located within or on a feature.

Point
lastPoint
(Schreibgeschützt)

The last coordinate of the feature.

Point
length
(Schreibgeschützt)

The length of the linear feature. The calculation uses 2D Cartesian mathematics.

For point and multipoint geometry, the length will be zero. For polygon geometry, the length will be the 2D length of the boundary.

Double
length3D
(Schreibgeschützt)

The 3D length of the linear feature. The calculation uses 3D Cartesian mathematics.

For point and multipoint geometry, the length will be zero. For polygon geometry, the length will be the 3D length of the boundary.

Vorsicht:

The operation does not perform unit conversion between the horizontal and the vertical coordinate systems. The x, y, and z coordinates are assumed to be in the same linear unit.

Vorsicht:

This property is only available for projected data.

Double
partCount
(Schreibgeschützt)

The number of geometry parts for the feature.

Integer
pointCount
(Schreibgeschützt)

The total number of points for the feature.

Integer
spatialReference
(Schreibgeschützt)

The spatial reference of the geometry.

SpatialReference
trueCentroid
(Schreibgeschützt)

The center of gravity for a feature.

Point
type
(Schreibgeschützt)

The geometry type: polygon, polyline, point, multipoint, multipatch, dimension, or annotation.

String

Methodenübersicht

MethodeErläuterung
boundary ()

Constructs the boundary of the geometry.

Boundary operator
buffer (distance)

Constructs a polygon at a specified distance from the geometry.

Buffer operator
clip (envelope)

Constructs the intersection of the geometry and the specified extent.

Clip operator
contains (second_geometry, {relation})

Indicates if the base geometry contains the comparison geometry.

contains is the opposite of within.

Only True relationships are shown in this illustration.

Possible contains relationships
convexHull ()

Constructs the geometry that is the minimal bounding polygon such that all outer angles are convex.

ConvexHull operator
crosses (second_geometry)

Gibt an, ob die beiden Geometrien sich in einer Geometrie mit einem geringeren Shape-Typ überschneiden.

Zwei Polylinien kreuzen sich, wenn sie nur Punkte gemeinsam haben, von denen mindestens einer kein Endpunkt ist. Eine Polylinie und ein Polygon kreuzen sich, wenn sie im Inneren des Polygons eine Polylinie oder einen Punkt (für eine vertikale Linie) gemeinsam haben, die bzw. der nicht der gesamten Polylinie entspricht.

Only True relationships are shown in this illustration.

Mögliche Beziehungen zwischen Überschneidungen
cut (cutter)

Splits this geometry into a part left of the cutting polyline, and a part right of it.

When a polyline or polygon is cut, it is split where it intersects the cutter polyline. Each piece is classified as left of or right of the cutter. This classification is based on the orientation of the cutter line. Parts of the target polyline that do not intersect the cutting polyline are returned as part of the right of result for that input polyline. If a geometry is not cut, the left geometry will be empty (None).

Cut operator
difference (other)

Constructs the geometry that is composed only of the region unique to the base geometry but not part of the other geometry. The following illustration shows the results when the red polygon is the source geometry.

Difference operator
disjoint (second_geometry)

Gibt an, ob die Basis- und die Vergleichsgeometrie keine gemeinsamen Punkte aufweisen.

Zwei Geometrien überschneiden sich, wenn disjoint den Wert False zurückgibt.

Only True relationships are shown in this illustration.

Mögliche Beziehungen zwischen nicht überschneidenden Geometrien
distanceTo (other)

Returns the minimum distance between two geometries. The distance is in the units of the geometry's spatial reference. If the geometries intersect, the minimum distance is 0.

Both geometries must have the same projection.

equals (second_geometry)

Indicates if the base and comparison geometries are of the same shape type and define the same set of points in the plane. This is a 2D comparison only; M and Z values are ignored.

Only True relationships are shown in this illustration.

Possible equals relationships
getPart ({index})

Returns an Array object of Point objects for a particular part of the geometry if an index is specified. If an index is not specified, an Array object containing an Array of Point objects for each geometry part is returned.

The getPart method is equivalent to indexing an object; that is, obj.getPart(0) is equivalent to obj[0].

intersect (other, dimension)

Constructs a geometry that is the geometric intersection of the two input geometries. Different dimension values can be used to create different shape types.

The intersection of two geometries of the same shape type is a geometry containing only the regions of overlap between the original geometries.

Intersect operator

For faster results, test if the two geometries are disjoint before calling intersect.

overlaps (second_geometry)

Gibt an, üb die Überschneidung der beiden Geometrien denselben Shape-Typ wie eine der Eingabegeometrien aufweist, aber keiner der Eingabegeometrien entspricht.

Only True relationships are shown in this illustration.

Mögliche Beziehungen bei Überlappungen
projectAs (spatial_reference, {transformation_name})

Projects a geometry and optionally applies a geotransformation.

To project, the geometry must have a spatial reference, and not have an unknown coordinate system. The new spatial reference system passed to the method defines the output coordinate system. If either spatial reference is unknown, the coordinates will not be changed. The z- and m-values are not changed by the projectAs method.

symmetricDifference (other)

Constructs the geometry that is the union of two geometries minus the instersection of those geometries.

The two input geometries must be the same shape type.

symmetricDifference operator
touches (second_geometry)

Indicates if the boundaries of the geometries intersect.

Two geometries touch when the intersection of the geometries is not empty, but the intersection of their interiors is empty. For example, a point touches a polyline only if the point is coincident with one of the polyline end points.

Only True relationships are shown in this illustration.

Possible touches relationships
union (other)

Constructs the geometry that is the set-theoretic union of the input geometries.

The two geometries being unioned must be the same shape type.

Union operator
within (second_geometry, {relation})

Indicates if the base geometry is within the comparison geometry.

within is the opposite operator of contains.

Only True relationships are shown in this illustration.

Possible within relationships

The base geometry is within the comparison geometry if the base geometry is the intersection of the geometries and the intersection of their interiors is not empty. within is a Clementini operator, except in the case of an empty base geometry.

Methoden

boundary ()
Rückgabewert
DatentypErläuterung
Object

A polygon's boundary is a polyline. A polyline's boundary is a multipoint, corresponding to the endpoints of the line. A point or multipoint's boundary is an empty point or multipoint.

buffer (distance)
ParameterErläuterungDatentyp
distance

The buffer distance.

The buffer distance is in the same units as the geometry that is being buffered.

A negative distance can only be specified against a polygon geometry.

Double
Rückgabewert
DatentypErläuterung
Polygon

The buffered polygon geometry.

clip (envelope)
ParameterErläuterungDatentyp
envelope

An Extent object used to define the clip extent.

Extent
Rückgabewert
DatentypErläuterung
Object

An output geometry clipped to the specified extent.

contains (second_geometry, {relation})
ParameterErläuterungDatentyp
second_geometry

A second geometry.

Object
relation

The spatial relationship type.

  • BOUNDARY Relationship has no restrictions for interiors or boundaries.
  • CLEMENTINI Interiors of geometries must intersect. Specifying CLEMENTINI is equivalent to specifying None. This is the default.
  • PROPER Boundaries of geometries must not intersect.

(Der Standardwert ist None)

String
Rückgabewert
DatentypErläuterung
Boolean

A return Boolean value of True indicates this geometry contains the second geometry.

convexHull ()
Rückgabewert
DatentypErläuterung
Object

The resulting geometry. The convex hull of a single point is the point itself.

crosses (second_geometry)
ParameterErläuterungDatentyp
second_geometry

A second geometry.

Object
Rückgabewert
DatentypErläuterung
Boolean

Der boolesche Rückgabetyp "True" gibt an, dass sich die beiden Geometrien in einer Geometrie mit einem geringeren Shape-Typ schneiden.

cut (cutter)
ParameterErläuterungDatentyp
cutter

The cutting polyline geometry.

PolyLine
Rückgabewert
DatentypErläuterung
Geometry

A list of two geometries.

difference (other)
ParameterErläuterungDatentyp
other

A second geometry.

Object
Rückgabewert
DatentypErläuterung
Object

The resulting geometry.

disjoint (second_geometry)
ParameterErläuterungDatentyp
second_geometry

A second geometry.

Object
Rückgabewert
DatentypErläuterung
Boolean

Der boolesche Rückgabetyp "True" gibt an, dass die beiden Geometrien keine gemeinsamen Punkte aufweisen.

distanceTo (other)
ParameterErläuterungDatentyp
other

A second geometry.

Object
Rückgabewert
DatentypErläuterung
Double

The distance between the two geometries.

equals (second_geometry)
ParameterErläuterungDatentyp
second_geometry

A second geometry.

Object
Rückgabewert
DatentypErläuterung
Boolean

A return Boolean value of True indicates that the two geometries are of the same shape type and define the same set of points in the plane.

getPart ({index})
ParameterErläuterungDatentyp
index

The index position of the geometry.

Integer
Rückgabewert
DatentypErläuterung
Array

The resultant Array object.

intersect (other, dimension)
ParameterErläuterungDatentyp
other

The second geometry.

Object
dimension

The topological dimension (shape type) of the resulting geometry.

  • 1A zero-dimensional geometry (point or multipoint).
  • 2A one-dimensional geometry (polyline).
  • 4A two-dimensional geometry (polygon).
Integer
Rückgabewert
DatentypErläuterung
Object

A new geometry (point, multipoint, polyline, or polygon) that is the geometric intersection of the two input geometries.

overlaps (second_geometry)
ParameterErläuterungDatentyp
second_geometry

A second geometry.

Object
Rückgabewert
DatentypErläuterung
Boolean

Der boolesche Rückgabetyp True gibt an, dass die Überschneidung der beiden Geometrien dieselbe Dimension wie eine der Eingabegeometrien aufweist.

projectAs (spatial_reference, {transformation_name})
ParameterErläuterungDatentyp
spatial_reference

The new spatial reference. This can be a SpatialReference object or the coordinate system name.

SpatialReference
transformation_name

The geotransformation name.

String
Rückgabewert
DatentypErläuterung
Object

The projected geometry.

symmetricDifference (other)
ParameterErläuterungDatentyp
other

A second geometry.

Object
Rückgabewert
DatentypErläuterung
Object

The resulting geometry.

touches (second_geometry)
ParameterErläuterungDatentyp
second_geometry

A second geometry.

Object
Rückgabewert
DatentypErläuterung
Boolean

A return Boolean value of True indicates the boundaries of the geometries intersect.

union (other)
ParameterErläuterungDatentyp
other

A second geometry.

Object
Rückgabewert
DatentypErläuterung
Object

The resulting geometry.

within (second_geometry, {relation})
ParameterErläuterungDatentyp
second_geometry

A second geometry.

Object
relation

The spatial relationship type.

  • BOUNDARY Relationship has no restrictions for interiors or boundaries.
  • CLEMENTINI Interiors of geometries must intersect. Specifying CLEMENTINI is equivalent to specifying None. This is the default.
  • PROPER Boundaries of geometries must not intersect.

(Der Standardwert ist None)

String
Rückgabewert
DatentypErläuterung
Boolean

A return Boolean value of True indicates this geometry is contained within the second geometry.

Codebeispiel

Multipoint example

Create a polyline feature class from scratch.

import arcpy

# A list of features and coordinate pairs
feature_info = [[[1, 2], [2, 4], [3, 7]],
                [[6, 8], [5, 7], [7, 2], [9, 5]]]

# A list that will hold each of the Multipoint objects
features = []

for feature in feature_info:
    # Create a Multipoint object based on the array of points
    # Append to the list of Multipoint objects
    features.append(
        arcpy.Multipoint(
            arcpy.Array([arcpy.Point(*coords) for coords in feature])))

# Persist a copy of the Polyline objects using CopyFeatures
arcpy.CopyFeatures_management(features, "c:/geometry/multipoints.shp")

Verwandte Themen