| Class | Description | |
|---|---|---|
 | AngularUnit | Represents an angular unit of measure used by a Geometry or SpatialReference, or in measurement conversion functions. |
| AreaUnit | Represent an area unit of measure. |
| BasicMaterial | A Material class describing basic graphic properties. |
| CompositeGeographicTransformation | A composite geographic transformation class is an ordered list of GeographicTransformation classes. The geographic transformations are applied in the order they are stored. |
| CompositeHVDatumTransformation | A composite hv datum transformation class is an ordered list of HVDatumTransformation classes. The hv datum transformations are applied in the order they are stored. |
| CoordinateSystemListEntry | Provides the wkid, name and category (or region) of a particular coordinate system. |
| CubicBezierBuilder | Constructs a third degree CubicBezierSegment for use in a Multipart geometry. |
| CubicBezierSegment | Represents a third degree cubic Bezier curve for use in a Multipart geometry. |
| Datum | Describes the horizontal datum of a geographic coordinate system. It is returned from SpatialReference.Datum. |
| DatumTransformation | An abstract class for datum transformations. Currently, a datum transformation can be a GeographicTransformation or a CompositeGeographicTransformation or HVDatumTransformation or CompositeHVDatumTransformation. |
| EllipticArcBuilder | Constructs an EllipticArcSegment for use in a Multipart geometry. |
| EllipticArcSegment | Represents an elliptic arc segment for use in a Multipart geometry. |
| Envelope | An envelope is an axis-aligned box described by the coordinates of the lower left corner and the coordinates of the upper right corner. |
| EnvelopeBuilder | Builder for creating an envelope. |
| EnvelopeBuilderEx | A pure .Net builder for creating an Envelope. |
| GenericCOMException | Thrown when there is a generic COM exception. |
| GeodesicEllipseParameter | Options for creating a geodesic ellipse with the GeometryEngine.GeodesicEllipse function. |
| GeodesicSectorParameter | Options for creating a geodesic ellipse with the GeometryEngine.GeodesicSector function. |
| GeographicTransformation | A geographic transformation is used when projecting geometries between two different geographic coordinate systems. A geographic transformation converts everything that needs to be changed including the units, prime meridian, and the ellipsoid. Every transformation is defined in a particular forward direction, say from GCS A to GCS B, but all are reversible. For example, a geographic transformation may be defined to convert from NAD27 to WGS84. If you are projecting from WGS84 to NAD27, you can use the reversed form of the transformation. |
| GeographicTransformationListEntry | Provides the name, wkid, and wkids of the spatial references from which and to which the data will be projected. |
| Geometry | An abstract base class for objects that define geometric shapes. Geometry objects can be used as geometry definitions for rendering data. |
| GeometryBag | A class representing a GeometryBag. |
| GeometryBagBuilder | Builder for creating a GeometryBag. |
| GeometryBuilder<T> | An abstract base class for all geometry builders. |
| GeometryBuilderEx | An abstract base class for all pure .Net geometry builders. |
| GeometryEngine | Utility for performing geometric operations. |
| GeometryException | General geometry exception; for example if a geometry type is not supported. |
| GeometryObjectException | Indicates there is a problem with a geometry parameter passed to a GeometryEngine function. For example the geometry is empty or non z-aware (when passed to a function expecting a z-aware geometry). |
| GridUnit | Represents a grid unit for a geographic location. |
| HVDatumTransformation | A hv (horizontal/vertical) datum transformation is used when projecting z-aware geometries between two different geographic coordinate systems and two different vertical coordinate systems. As with geographic transformations, a hv datum transformation converts everything that needs to be changed including the units, prime meridian, and the ellipsoid. In addition, a hv datum transformation transforms height. Every transformation is defined in a particular forward direction, but all are reversible. For example, suppose your z-aware geometry is in WGS84 with vertical coordinate system EGM2008_Geoid, and you want to project to NAD83_2011 with vertical coordinate system NAD83_2011. A hv datum transformation is defined to project your z-aware geometry from WGS84 with vertical coordinate system EGM2008_Geoid to NAD83_2011 with vertical coordinate system NAD83_2011. If you are projecting from NAD83_2011 with vertical coordinate system NAD83_2011 to WGS84 with vertical coordinate system EGM2008_Geoid to NAD83_2011, you can use the reversed form of the transformation. |
| InvalidParameterException | Thrown when a geometry engine parameter is invalid. |
| JPEGTexture | A TextureMap that contains a Jpeg image. |
| JSONException | Thrown when there is a JSON error. |
| LinearUnit | Represents a linear unit of measure used by a Geometry or SpatialReference, or in measurement conversion functions. |
| LineBuilder | Builder for creating a LineSegment. |
| LineSegment | A class representing a straight line between a start and end point for use in a Multipart geometry. |
| MapPoint | A MapPoint represents a single location in space. The location consists of X and Y values and optionally a Z and/or M value. |
| MapPointBuilder | Builder for creating a map point. |
| MapPointBuilderEx | A pure .Net builder for creating a MapPoint. |
| Material | An abstract Material instance. |
| Multipart | An abstract base class for multipart geometry types. |
| MultipartBuilder<T> | Abstract base class for the PolylineBuilder and PolygonBuilder classes. |
| Multipatch | A class representing a multipatch. |
| MultipatchBuilder | Builder for creating a multipatch. |
| MultipatchBuilderEx | A pure .Net builder for creating a Multipatch. |
| Multipoint | A Multipoint is a ordered collection of map points. |
| MultipointBuilder | Builder for creating a Multipoint. |
| MultipointBuilderEx | A pure .NET builder for creating a Multipoint. |
| NullGeometryObjectException | Indicates the geometry is null or empty. |
| OperationException | Thrown when a geometry operation fails. |
| Patch | A class to create a patch for a Multipatch. Use MultipatchBuilderEx to construct a Multipatch from patches. |
| Polygon | A class representing a polygon. |
| PolygonBuilder | Builder for creating a polygon. |
| Polyline | A class representing a polyline. |
| PolylineBuilder | Builder for creating a polyline. |
| ProjectionEngineException | Thrown when there is a problem with the projection engine. |
| ProjectionTransformation | A projection transformation describes parameters used to project geometries from one spatial reference to another. Used in the GeometryEngine.ProjectEx method. |
| ProximityResult | Result from a GeometryEngine proximity operation such as GeometryEngine.NearestPoint or GeometryEngine.NearestVertex. |
| ReadOnlyPartCollection | A Read-only collection of ReadOnlySegmentCollection parts used by Polyline and Polygon. |
| ReadOnlyPointCollection | A read-only collection of MapPoints. |
| ReadOnlySegmentCollection | A read only collection of Segment classes. |
| Segment | Abstract class representing a start and end point and how they are connected. The most common is a straight line LineSegment. |
| SegmentBuilder | Abstract base class for Builders of all segment types to include:
|
| SpatialReference | Class representing a spatial reference. |
| SpatialReferenceBuilder | Builder for creating a SpatialReference. |
| SpatialReferenceImmutableException | Thrown by SpatialReferenceBuilder when attempting to alter a populated spatial reference object. |
| SpatialReferences | Contains some common spatial references. |
| Texture | An abstract texture class. |
| TextureMap | A Texture class that contains a raster image. |
| TextureResource | A texture resource class that wraps a Texture instance. |
| ToGeoCoordinateParameter | A class used as the parameter to MapPoint.ToGeoCoordinateString. |
| UncompressedTexture | A TextureMap that contains a raw uncompressed raster image. |
| Unit | A common base class between all units, linear, area and angular units. |
This namespace contains types for creating, modifying, deleting, and converting geometry objects.
Classes
Interfaces
| Interface | Description | |
|---|---|---|
 | IGeometryEngine | Geometry Engine interface. Performs geometric operations. |
Structures
| Structure | Description | |
|---|---|---|
 | Coordinate2D | A lightweight structure that holds X and Y values. |
| Coordinate3D | A structure containing methods to manipulate 3D vertices and 3D vectors. |
Enumerations
| Enumeration | Description | |
|---|---|---|
 | AsRatioOrLength | Describes how the distance along the curve is interpreted. See the GeometryEngine.SetMsAsDistance, GeometryEngine.QueryNormal, GeometryEngine.QueryPoint, GeometryEngine.GetSubCurve functions as examples. |
| CoordinateSystemFilter | Coordinate System Filter. Use a filter as input to GeometryEngine.GetPredefinedCoordinateSystemList. Can be used as a bit mask to get multiple coordinate system types in one list. |
| esriArcOrientation | Describes the orientation of an EllipticArcSegment. The orientation is defined as the direction between the 'from' and 'to' points of the arc. |
| esriClothoidCreateMethod | The method of creation for a clothoid. Used with PolylineBuilder.CreatePolyline. |
| esriCurveDensifyMethod | Methods to specify curve densification. Used with PolylineBuilder.CreatePolyline. |
| esriPatchType | Describes the type of the patch. |
| EsriShapeExportFlags | Specifies the flags that control the behavior of the GeometryEngine.ExportToEsriShape and GeometryEngine.ExportToEsriShape methods. |
| EsriShapeImportFlags | Specifies the flags that control the behavior of the GeometryEngine.ImportFromEsriShape method. |
| esriTextureCompressionType | Describes the compression type of the material texture. |
| ExtendFlags | Extend flag options for use with the GeometryEngine.Extend function. |
| FromGeoCoordinateMode | Determines the format of the coordinate description. See MapPointBuilder.FromGeoCoordinateString. |
| GeoCoordinateType | Options for representing different coordinate string notations. Used with the ToGeoCoordinateParameter class as part of the MapPoint.ToGeoCoordinateString and MapPointBuilder.FromGeoCoordinateString functions. |
| GeodeticCurveType | Curve type options for use with the geodetic functions. See GeometryEngine.GeodeticDensifyByLength, GeometryEngine.GeodeticDensifyByDeviation or GeometryEngine.GeodeticMove. |
| GeometryDimension | Describes the dimensionality of the geometry object. Use with GeometryEngine.Intersection . |
| GeometryException.GeometryExceptionType | Describes the different types of geometry exceptions. |
| GeometryType | Describes the different types of geometry. |
| JSONExportFlags | Specifies the flags that control the behavior of the GeometryEngine.ExportToJSON method. |
| JSONImportFlags | Specifies the flags that control the behavior of the GeometryEngine.ImportFromJSON method. |
| LeftOrRightSide | When used in GeometryEngine.QueryPointAndDistance or GeometryEngine.QueryPointAndDistance, describes whether the input point is on the left or right side of the curve. When used in GeometryEngine.SideBuffer or GeometryEngine.SideBuffer, describes which side of the input geometry to construct the buffer. The direction of the curve determines the left and right sides. |
| LineCapType | Defines the shape of the line ending for polylines and points (square or round). See GeometryEngine.GraphicBuffer, GeometryEngine.GraphicBuffer, GeometryEngine.SideBuffer, and GeometryEngine.SideBuffer |
| LineJoinType | Defines the connection of the buffer at corners. See GeometryEngine.GraphicBuffer and GeometryEngine.GraphicBuffer. |
| MinorOrMajor | Indicates whether the arc is a minor or major arc. An arc is minor if the central angle is less than PI radians (180 degrees) and major otherwise. Used with EllipticArcBuilder.CreateEllipticArcSegment. |
| Monotonic | Describes if values on a geometry are all ascending, all descending, or neither. See the GeometryEngine.GetMMonotonic function. |
| OffsetType | Offset options for use with the GeometryEngine.Offset function. |
| SegmentExtension | Describes if, how and where to extend segments. See the GeometryEngine.QueryPointAndDistance function. |
| SegmentType | Describes the type of line segment. See the Segment.SegmentType property. |
| SimplifyType | Options for use with the GeometryEngine.SimplifyPolyline functions. |
| SliceType | Options for use with the GeometryEngine.SlicePolygonIntoEqualParts function. |
| ToGeoCoordinateMode | Determines how to handle the geographic coordinate system of the spatial reference. Certain older geographic coordinate systems will cause one of the letters of the string to be shifted. This process makes it easier to identify coordinates that are based on a non-WGS84 datum. |
| UnitType | Describes the different types of units. |
| UpdateMMethod | The method to use when updating M values. See GeometryEngine.CalibrateByMs |
| WKBExportFlags | Specifies the flags that control the behavior of the GeometryEngine.ExportToWKB and GeometryEngine.ExportToWKB methods. |
| WKBImportFlags | Specifies the flags that control the behavior of the GeometryEngine.ImportFromWKB method. |
| WKTExportFlags | Specifies the flags that control the behavior of the GeometryEngine.ExportToWKT method. |
| WKTImportFlags | Specifies the flags that control the behavior of the GeometryEngine.ImportFromWKT method. |
See Also