Spatial Analyst toolbox history—ArcGIS Pro

The tables below catalog changes made to every tool in the Spatial Analyst toolbox. There is one table per tool and you can click the tool name to navigate to the tool reference page.

For more information on how to interpret and use these tables, see the topic About the toolbox history tables.

Abs


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

ACos


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

ACosH


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Add Surface Information


Version	Description
2.7	Existing 3D Analyst tool now available to Spatial Analyst at this release

Aggregate


Version	Description
2.5	Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool. The median option of the aggregation_type parameter will now always produce an output raster of type float.
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Aggregate Multidimensional Raster


Version	Description
2.8	3 new parameters added: percentile_interpolation_type dimensionless percentile_value Parameter aggregation_method had new option added: PERCENTILE
2.6	New environment added: pyramid
2.5	Parameter in_multidimensional_raster has 3 new data types: Mosaic Dataset Image Service Raster Dataset Parameter interval_keyword has 6 new options: RECURRING_MONTHLY PENTADLY DEKADLY RECURRING_WEEKLY RECURRING_QUARTERLY RECURRING_DAILY
2.4	New at this version

Area Solar Radiation


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

ASin


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

ASinH


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Aspect


Version	Description
2.6	New parameter added: project_geodesic_azimuths.
2.3	New environment added: cellSizeProjectionMethod
2.0	Two new parameters added: method z_unit The method parameter allows you choose between the traditional planar method for performing the calculations, and the new geodesic method. When using the geodesic option: A new z_unit parameter is available, which allows you to specify the linear unit of the vertical z-values if it is not already defined in the coordinate system of the input. If a suitable GPU device is available on your system, greater performance will come as a result of the calculations being GPU accelerated. The behavior for how NoData cells and boundary cells are handled was changed. At least seven of the eight cells neighboring the processing cell must have a value, otherwise the output will be NoData. Cells in the outermost rows and columns of the output raster will be NoData.
1.0	Ported from ArcMap 10.3

ATan


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

ATan2


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

ATanH


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Band Collection Statistics


Version	Description
1.0	Ported from ArcMap 10.3

Basin


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Bitwise And


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Bitwise Left Shift


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Bitwise Not


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Bitwise Or


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Bitwise Right Shift


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Bitwise XOr


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Block Statistics


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Boolean And


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Boolean Not


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Boolean Or


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Boolean XOr


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Boundary Clean


Version	Description
2.7	Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Cell Statistics


Version	Description
2.9	Two new parameters added: percentile_interpolation_type percentile_value Parameter statistics_type had new option added: PERCENTILE
2.5	New parameter added: process_as_multiband This parameter has two options: SINGLE_BAND for processing as single band and MULTI_BAND for processing as multiband. The default is SINGLE_BAND.
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Class Probability


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Classify Raster


Version	Description
2.6	Parameter in_raster has two new data types: Mosaic Dataset Raster Dataset Parameter in_additional_raster has two new data types: Mosaic Dataset Raster Dataset
2.2	Parameter in_raster has two new data types: Image Service String Parameter in_additional_raster has two new data types: Image Service String Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
1.0	New at this version

Combinatorial And


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Combinatorial Or


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Combinatorial XOr


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Combine


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Compute Confusion Matrix


Version	Description
1.1	New at this version

Compute Segment Attributes


Version	Description
2.2	Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
1.0	Ported from ArcMap 10.3

Con


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Contour


Version	Description
2.4	Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
2.3	New environment added: cellSizeProjectionMethod
2.2	Two new parameters added: contour_type max_vertices_per_feature
1.0	Ported from ArcMap 10.3

Contour List


Version	Description
2.4	Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Contour with Barriers


Version	Description
1.0	Ported from ArcMap 10.3

Corridor


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Cos


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

CosH


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Cost Allocation


Version	Description
2.3	New environment added: cellSizeProjectionMethod
2.2	There was a change in default environment behavior in which the processing extent and spatial reference now default to that of the in_cost_raster. Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
1.3	New parameter added: source_direction
1.2	Four new parameters added: source_cost_multiplier source_start_cost source_resistance_rate source_capacity
1.0	Ported from ArcMap 10.3

Cost Back Link


Version	Description
2.3	New environment added: cellSizeProjectionMethod
2.2	There was a change in default environment behavior in which the processing extent and spatial reference now default to that of the in_cost_raster. Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
1.3	New parameter added: source_direction
1.2	Four new parameters added: source_cost_multiplier source_start_cost source_resistance_rate source_capacity
1.0	Ported from ArcMap 10.3

Cost Connectivity


Version	Description
2.3	New environment added: cellSizeProjectionMethod
2.2	There was a change in default environment behavior in which the processing extent and spatial reference now default to that of the in_cost_raster.
1.2	New at this version

Cost Distance


Version	Description
2.3	New environment added: cellSizeProjectionMethod
2.2	There was a change in default environment behavior in which the processing extent and spatial reference now default to that of the in_cost_raster. Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
1.3	New parameter added: source_direction
1.2	Four new parameters added: source_cost_multiplier source_start_cost source_resistance_rate source_capacity
1.0	Ported from ArcMap 10.3

Cost Path


Version	Description
2.5	New parameter added: force_flow_direction_convention
1.0	Ported from ArcMap 10.3

Cost Path As Polyline


Version	Description
2.5	New parameter added: force_flow_direction_convention
2.1	New at this version

Create Accuracy Assessment Points


Version	Description
2.9	New parameter added: polygon_dimension_field
1.1	New at this version

Create Constant Raster


Version	Description
2.8	Parameter extent has new data type: Envelope
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Create Normal Raster


Version	Description
2.8	Parameter extent has new data type: Envelope
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Create Random Raster


Version	Description
2.8	Parameter extent has new data type: Envelope
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Create Signatures


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Curvature


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Cut Fill


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Darcy Flow


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Darcy Velocity


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Deep Learning Model To Ecd


Version	Description
2.3	Deprecated
2.1	New at this version

Dendrogram


Version	Description
1.0	Ported from ArcMap 10.3

Diff


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Dimensional Moving Statistics


Version	Description
2.9	New at this version

Distance Accumulation


Version	Description
2.5	New at this version

Distance Allocation


Version	Description
2.5	New at this version

Divide


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Edit Signatures


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Equal To


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Equal To Frequency


Version	Description
2.6	New parameter added: process_as_multiband.
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Euclidean Allocation


Version	Description
2.4	Two new parameters added: in_barrier_data out_back_direction_raster Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
2.3	New environment added: cellSizeProjectionMethod Multi-core support disabled. The parallelProcessingFactor environment no longer applies to this tool.
2.2	New parameter added: distance_method This parameter has two options: the traditional planar method for performing the calculations and a new geodesic method. The default is planar. Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
1.0	Ported from ArcMap 10.3

Euclidean Back Direction


Version	Description
2.4	New at this version

Euclidean Direction


Version	Description
2.4	Two new parameters added: in_barrier_data out_back_direction_raster Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
2.3	New environment added: cellSizeProjectionMethod Multi-core support disabled. The parallelProcessingFactor environment no longer applies to this tool.
2.2	New parameter added: distance_method This parameter has two options: the traditional planar method for performing the calculations and a new geodesic method. The default is planar. Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
1.0	Ported from ArcMap 10.3

Euclidean Distance


Version	Description
2.4	Two new parameters added: in_barrier_data out_back_direction_raster Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
2.3	New environment added: cellSizeProjectionMethod Multi-core support disabled. The parallelProcessingFactor environment no longer applies to this tool.
2.2	New parameter added: distance_method This parameter has two options: the traditional planar method for performing the calculations and a new geodesic method. The default is planar. Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
1.0	Ported from ArcMap 10.3

Exp


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Exp10


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Exp2


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Expand


Version	Description
2.4	New parameter added: expand_method. The MORPHOLOGICAL option for this parameter generates the same results as with previous releases, and is the default. With the DISTANCE method, a different algorithm is used that is distance-based, and will yield smoother results with larger settings for the number_of_cells parameter. Multi-core support is added, but only when the DISTANCE option is selected. Use the parallelProcessingFactor environment to control the number of cores used by the tool.
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Export Training Data For Deep Learning


Version	Description
2.9	Parameter metadata_format had new option added: Imagenet
2.8	New parameter added: in_raster2 Parameter metadata_format had new option added: CycleGAN
2.7	Parameter metadata_format had two options added: MultiLabeled_Tiles Export_Tiles
2.6	Default value for parameter metadata_format changed from KTTI_rectangles to PASCAL_VOC_rectangles. Parameter reference_system had IMAGE_SPACE option removed
2.5	Four new parameters added: blacken_around_feature crop_mode reference_system processing_mode
2.4	Two new parameters added: in_mask_polygons rotation_angle Parameter metadata_format had new option added: Labeled_Tiles Parameter in_raster has new data type: Folder
2.3	Two new parameters added: buffer_radius class_value_field Parameter in_raster has four new data types: Internet Tiled Layer Map Server Layer Raster Dataset MapServer Parameter metadata_format had new option added: RCNN_Masks Parameter in_class_data has two new data types: Feature Class Raster Dataset
2.2	New parameter added: start_index
2.1	New at this version

Extract by Attributes


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Extract by Circle


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Extract by Mask


Version	Description
2.3	New environment added: cellSizeProjectionMethod
2.2	There were some changes in the default environment behavior, as follows: The tool will now use the in_raster as the default snap raster. This will improve the accuracy of the output by ensuring the correct alignment of the feature mask with the value raster. If the Mask input is a feature, the in_raster will be used for setting the cell size and the snap raster for the analysis environment. If the Mask input is a raster, the tool will compare the cell size of it to that of the in_raster, and use the one with the largest value as the cell size of the operation.
1.0	Ported from ArcMap 10.3

Extract by Points


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Extract by Polygon


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Extract by Rectangle


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Extract Multi Values to Points


Version	Description
1.2	Better handling of conditions when NoData cells are sampled. Some performance optimizations for faster execution with larger point datasets.
1.0	Ported from ArcMap 10.3

Extract Values to Points


Version	Description
1.2	Better handling of conditions when NoData cells are sampled.
1.0	Ported from ArcMap 10.3

Fill


Version	Description
2.3	New environment added: cellSizeProjectionMethod
2.2	Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
1.0	Ported from ArcMap 10.3

Filter


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Float


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Flow Accumulation


Version	Description
2.3	New environment added: cellSizeProjectionMethod
2.2	New parameter added: flow_direction_type This parameter allows you to specify the type of input flow direction raster (D8, MFD, or DINF). Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
2.1	Added new DOUBLE option to data_type parameter choices.
1.0	Ported from ArcMap 10.3

Flow Direction


Version	Description
2.3	New environment added: cellSizeProjectionMethod
2.2	Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
2.1	New parameter added: flow_direction_type. This parameter allows you to specifies the type of flow method to use while computing flow directions. The available options are D8, MFD, or DINF.
1.0	Ported from ArcMap 10.3

Flow Distance


Version	Description
2.3	New parameter added: statistics_type New environment added: cellSizeProjectionMethod
2.2	New parameter added: flow_direction_type This parameter allows you to specify the type of input flow direction raster (D8, MFD, or DINF). Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
2.1	New at this version

Flow Length


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Focal Flow


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Focal Statistics


Version	Description
2.4	New option for the statistics_type parameter: PERCENTILE New parameter added: percentile_value. This parameter is only supported when the statistics type is set to percentile. The median option of statistics_type now supports float rasters as input. The output from median is now always Float.
2.3	Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool. New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Fuzzy Membership


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Fuzzy Overlay


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Generate Multidimensional Anomaly


Version	Description
2.6	New parameter added: reference_mean_raster Parameter calculation_interval has new option added: EXTERNAL_RASTER New environment added: pyramid
2.5	New parameter added: calculation_interval Parameter removed: temporal_interval Parameter order changed at parameter five: Old parameter: temporal_interval New parameter: calculation_interval Parameter in_multidimensional_raster has 3 new data types: Mosaic Dataset Image Service Raster Dataset Parameter method has four new options: PERCENT_OF_MEDIAN DIFFERENCE_FROM_MEDIAN Z_SCORE PERCENT_DIFFERENCE_FROM_MEDIAN
2.4	New at this version

Generate Training Samples From Seed Points


Version	Description
2.0	New at this version

Geodesic Viewshed


Version	Description
2.8	Tool label changed from Viewshed 2 to Geodesic Viewshed.
2.3	New environment added: cellSizeProjectionMethod
1.1	New parameter added: analysis_method. This parameter allows you choose the method by which the visibility will be calculated. The option allows you to trade some accuracy for increased performance.
1.0	Ported from ArcMap 10.3

Greater Than


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Greater Than Equal


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Greater Than Frequency


Version	Description
2.6	New parameter added: process_as_multiband.
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Highest Position


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Hillshade


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

IDW


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

InList


Version	Description
2.3	New parameter added: process_as_multiband New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Inspect Training Samples


Version	Description
2.2	Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
2.0	New at this version

Interpolate Shape


Version	Description
2.7	Existing 3D Analyst tool now available to Spatial Analyst at this release

Int


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Is Null


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Iso Cluster


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Iso Cluster Unsupervised Classification


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Kernel Density


Version	Description
2.6	New parameter added: in_barriers. New environment added: parallelProcessingFactor.
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Kriging


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Less Than


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Less Than Equal


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Less Than Frequency


Version	Description
2.6	New parameter added: process_as_multiband.
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Line Density


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Line Statistics


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Ln


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Locate Regions


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.2	New at this version

Log10


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Log2


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Lookup


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Lowest Position


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Maximum Likelihood Classification


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Majority Filter


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Minus


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Mod


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Natural Neighbor


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Negate


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Nibble


Version	Description
2.3	New environment added: cellSizeProjectionMethod
2.2	Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
2.1	Two new parameters added: nibble_nodata in_zone_raster
1.0	Ported from ArcMap 10.3

Not Equal


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Observer Points


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Optimal Path As Line


Version	Description
2.7	New parameter added: create_network_paths
2.5	New at this version

Optimal Path As Raster


Version	Description
2.5	New at this version

Optimal Region Connections


Version	Description
2.6	New parameter added: connections_within_regions
2.5	New at this version

Over


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Particle Track


Version	Description
1.0	Ported from ArcMap 10.3

Path Distance


Version	Description
2.3	New environment added: cellSizeProjectionMethod
2.2	There was a change in default environment behavior in which the processing extent and spatial reference now default to that of the in_cost_raster. Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
1.3	New parameter added: source_direction
1.2	Four new parameters added: source_cost_multiplier source_start_cost source_resistance_rate source_capacity
1.0	Ported from ArcMap 10.3

Path Distance Allocation


Version	Description
2.3	New environment added: cellSizeProjectionMethod
2.2	There was a change in default environment behavior in which the processing extent and spatial reference now default to that of the in_cost_raster. Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
1.3	New parameter added: source_direction
1.2	Four new parameters added: source_cost_multiplier source_start_cost source_resistance_rate source_capacity
1.0	Ported from ArcMap 10.3

Path Distance Back Link


Version	Description
2.3	New environment added: cellSizeProjectionMethod
2.2	There was a change in default environment behavior in which the processing extent and spatial reference now default to that of the in_cost_raster. Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
1.3	New parameter added: source_direction
1.2	Four new parameters added: source_cost_multiplier source_start_cost source_resistance_rate source_capacity
1.0	Ported from ArcMap 10.3

Pick


Version	Description
2.5	New parameter added: process_as_multiband This parameter has two options: unchecked (SINGLE_BAND in Python) for processing as single band and checked (MULTI_BAND in Python) for processing as multiband. The default is SINGLE_BAND processing.
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Plus


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Point Density


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Point Statistics


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Points Solar Radiation


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Popularity


Version	Description
2.6	New parameter added: process_as_multiband.
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Porous Puff


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Power


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Principal Components


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Rank


Version	Description
2.6	New parameter added: process_as_multiband.
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Raster Calculator


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Reclass by ASCII File


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Reclass by Table


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Reclassify


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Region Group


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Remove Raster Segment Tiling Artifacts


Version	Description
2.2	Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
1.4	Parameter in_segmented_raster has four new data types: Raster Dataset Mosaic Dataset String Image Service
1.2	New at this version

Rescale by Function


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Round Down


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Round Up


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Sample


Version	Description
2.6	New parameter added: generate_feature_class.
2.5	5 new parameters added: acquisition_definition statistics_type percentile_value buffer_distance layout New environment added: parallelProcessingFactor. This environment is honored only when the process_as_multidimensional parameter is set to ALL_SLICES.
1.2	Better handling of conditions when NoData cells are sampled. Some performance optimizations for faster execution with larger point datasets.
1.0	Ported from ArcMap 10.3

Segment Mean Shift


Version	Description
2.6	New parameter added: max_segment_size
2.2	Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
1.0	Ported from ArcMap 10.3

Set Null


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Shrink


Version	Description
2.4	New parameter added: shrink_method. The MORPHOLOGICAL option for this parameter generates the same results as with previous releases, and is the default. With the DISTANCE method, a different algorithm is used that is distance-based, and will yield smoother results with larger settings for the number_of_cells parameter. Multi-core support is added, but only when the DISTANCE option is selected. Use the parallelProcessingFactor environment to control the number of cores used by the tool.
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Sin


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

SinH


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Sink


Version	Description
2.3	New environment added: cellSizeProjectionMethod
2.2	Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
1.0	Ported from ArcMap 10.3

Slice


Version	Description
2.9	Two new parameters added: nodata_to_value class_interval_size Parameter slice_type has four new options: STANDARD_DEVIATION_MEAN_CENTERED GEOMETRIC_INTERVAL DEFINED_INTERVAL STANDARD_DEVIATION_MEAN_BREAK Parameter number_zones changed from Required to Optional
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Slope


Version	Description
2.3	New environment added: cellSizeProjectionMethod
2.0	Two new parameters added: method z_unit The method parameter allows you choose between the traditional planar method for performing the calculations, and the new geodesic method. When using the geodesic option: A new z_unit parameter is available, which allows you to specify the linear unit of the vertical z-values if it is not already defined in the coordinate system of the input. If a suitable GPU device is available on your system, greater performance will come as a result of the calculations being GPU accelerated. The behavior for how NoData cells and boundary cells are handled was changed. At least seven of the eight cells neighboring the processing cell must have a value, otherwise the output will be NoData. Cells in the outermost rows and columns of the output raster will be NoData.
1.0	Ported from ArcMap 10.3

Snap Pour Point


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Solar Radiation Graphics


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Spline


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Spline with Barriers


Version	Description
2.0	Ported from ArcMap 10.5

Square


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Square Root


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Storage Capacity


Version	Description
2.7	New at this version

Stream Link


Version	Description
2.3	New environment added: cellSizeProjectionMethod
2.2	Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
1.0	Ported from ArcMap 10.3

Stream Order


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Stream to Feature


Version	Description
1.0	Ported from ArcMap 10.3

Surface Parameters


Version	Description
2.9	Parameter parameter_type had four new options: CONTOUR_CURVATURE CONTOUR_GEODESIC_TORSION GAUSSIAN_CURVATURE CASORATI_CURVATURE
2.7	New at this version

Tabulate Area


Version	Description
2.6	New parameter added: classes_as_rows.
2.3	New environment added: cellSizeProjectionMethod
2.2	There was a change in default environment behavior for this tool. If both the inputs are raster, the cell size of the operation will be the larger of the two. If one input is a raster and the other a feature, the raster input will be used for setting the cell size and the snap raster for the analysis environment.
1.0	Ported from ArcMap 10.3

Tan


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

TanH


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Test


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Thin


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Times


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Topo to Raster


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Topo to Raster by File


Version	Description
1.0	Ported from ArcMap 10.3

Train ISO Cluster Classifier


Version	Description
2.2	Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
1.4	Environments added: Remote Processing Server Remote Processing User Name Remote Processing Password The in_raster parameter has two new data types: Image Service String The in_additional_raster parameter has two new data types: Image Service String
1.2	Two new parameters added: max_merge_per_iter—Max Number of Cluster Merges Per Iteration max_merge_distance
1.0	Ported from ArcMap 10.3

Train K-Nearest Neighbor Classifier


Version	Description
2.9	New at this version

Train Maximum Likelihood Classifier


Version	Description
2.6	New parameter added: dimension_value_field
1.4	The in_raster parameter has two new data types: Image Service String The in_additional_raster parameter has two new data types: Image Service String
1.0	Ported from ArcMap 10.3

Train Random Trees Classifier


Version	Description
2.6	New parameter added: dimension_value_field
1.4	The in_raster parameter has two new data types: Image Service String The in_additional_raster parameter has two new data types: Image Service String
1.2	New at this version

Train Support Vector Machine Classifier


Version	Description
2.6	New parameter added: dimension_value_field Default value for parameter max_samples_per_class changed from 500 to 1000
2.2	Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
1.4	The in_raster parameter has two new data types: Image Service String The in_additional_raster parameter has two new data types: Image Service String
1.3	Default value for parameter max_samples_per_class changed from 100 to 500
1.0	Ported from ArcMap 10.3

Trend


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Update Accuracy Assessment Points


Version	Description
2.9	Two new parameters added: polygon_dimension_field point_dimension_field
1.1	New at this version

Viewshed


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Visibility


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Watershed


Version	Description
2.3	New environment added: cellSizeProjectionMethod
2.2	Multi-core support added. Use the Parallel Processing Factor environment to control the number of cores used by the tool.
1.0	Ported from ArcMap 10.3

Weighted Overlay


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Weighted Sum


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Zonal Fill


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Zonal Geometry


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Zonal Geometry as Table


Version	Description
2.3	New environment added: cellSizeProjectionMethod
1.0	Ported from ArcMap 10.3

Zonal Histogram


Version	Description
2.6	New parameter added: zones_as_rows.
2.3	New environment added: cellSizeProjectionMethod
2.2	There was a change in the default environment behavior when the zone input is a feature. The in_value_raster is now used as the snap raster.
1.0	Ported from ArcMap 10.3

Zonal Statistics


Version	Description
2.7	New parameter added: percentile_interpolation_type
2.6	New option for the statistics_type parameter: PERCENTILE New parameter added: percentile_value. This parameter is only supported when the statistics type is set to percentile.
2.5	New parameter added: process_as_multidimensional This parameter has two options: SINGLE_SLICE (Unchecked) for processing a single slice and ALL_SLICES (Checked) for processing multiple slices. The default is SINGLE_SLICE.
2.3	New environment added: cellSizeProjectionMethod
2.2	There was a change in the default environment behavior when the zone input is a feature. The in_value_raster is now used as the snap raster.
1.0	Ported from ArcMap 10.3

Zonal Statistics as Table


Version	Description
2.7	New parameter added: percentile_interpolation_type
2.6	New option for the statistics_type parameter: PERCENTILE New parameter added: percentile_values.
2.5	New parameter added: process_as_multidimensional This parameter has two options: SINGLE_SLICE (Unchecked) for processing a single slice and ALL_SLICES (Checked) for processing multiple slices. The default is SINGLE_SLICE.
2.3	New environment added: cellSizeProjectionMethod
2.2	There was a change in the default environment behavior when the zone input is a feature. The in_value_raster is now used as the snap raster.
1.0	Ported from ArcMap 10.3

Feedback on this topic?